A Xen guest memory is allocated by libxc. But this memory is not
allocated continuously, instead, it leaves the VGA IO memory space not
allocated, same for the MMIO space (at HVM_BELOW_4G_MMIO_START of size
HVM_BELOW_4G_MMIO_LENGTH).
So to reflect that, we do not register the physical memory for this two
holes. But we still keep only one RAMBlock for the all RAM as it is more
easier than have two separate blocks (1 above 4G). Also this prevent QEMU
from use the MMIO space for a ROM.
Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
---
xen-all.c | 27 ++++++++++++++++++++-------
1 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/xen-all.c b/xen-all.c
index b19da37..d535f90 100644
--- a/xen-all.c
+++ b/xen-all.c
@@ -19,6 +19,7 @@
#include <xen/hvm/ioreq.h>
#include <xen/hvm/params.h>
+#include <xen/hvm/e820.h>
//#define DEBUG_XEN
@@ -144,6 +145,12 @@ static void xen_ram_init(ram_addr_t ram_size)
new_block->host = NULL;
new_block->offset = 0;
new_block->length = ram_size;
+ if (ram_size >= HVM_BELOW_4G_RAM_END) {
+ /* Xen does not allocate the memory continuously, and keep a hole at
+ * HVM_BELOW_4G_MMIO_START of HVM_BELOW_4G_MMIO_LENGTH
+ */
+ new_block->length += HVM_BELOW_4G_MMIO_LENGTH;
+ }
QLIST_INSERT_HEAD(&ram_list.blocks, new_block, next);
@@ -152,20 +159,26 @@ static void xen_ram_init(ram_addr_t ram_size)
memset(ram_list.phys_dirty + (new_block->offset >> TARGET_PAGE_BITS),
0xff, new_block->length >> TARGET_PAGE_BITS);
- if (ram_size >= 0xe0000000 ) {
- above_4g_mem_size = ram_size - 0xe0000000;
- below_4g_mem_size = 0xe0000000;
+ if (ram_size >= HVM_BELOW_4G_RAM_END) {
+ above_4g_mem_size = ram_size - HVM_BELOW_4G_RAM_END;
+ below_4g_mem_size = HVM_BELOW_4G_RAM_END;
} else {
below_4g_mem_size = ram_size;
}
- cpu_register_physical_memory(0, below_4g_mem_size, new_block->offset);
-#if TARGET_PHYS_ADDR_BITS > 32
+ cpu_register_physical_memory(0, 0xa0000, 0);
+ /* Skip of the VGA IO memory space, it will be registered later by the VGA
+ * emulated device.
+ *
+ * The area between 0xc0000 and 0x100000 will be used by SeaBIOS to load
+ * the Options ROM, so it is registered here as RAM.
+ */
+ cpu_register_physical_memory(0xc0000, below_4g_mem_size - 0xc0000,
+ 0xc0000);
if (above_4g_mem_size > 0) {
cpu_register_physical_memory(0x100000000ULL, above_4g_mem_size,
- new_block->offset + below_4g_mem_size);
+ 0x100000000ULL);
}
-#endif
}
void xen_ram_alloc(ram_addr_t ram_addr, ram_addr_t size)
--
Anthony PERARD
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home