| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] RE: Windows7 Home, PV drivers (x32_0.11.0.238) stuck dur
> > When it is hung like that, can you go into device manager and tell me
> > what xen devices are loaded?
>
> Nothing shows up as Xen. I ran Lavasys Everest to do a report and scanned
> for anything that said 'Xen'. The only things I found were the DMI fields.
>
> Interestingly enough, if I click "Cancel" it is still hung. Are there
> any installation logs of what it tried to load/install?
It does Cancel, just takes a bit of time. Found out that running
the installer with /l* Logfile.txt did the trick and saw this:
.. snip..
DIFXAPP: INFO: No matching devices found in INF
"C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf"
on the Machine.
DIFXAPP: INFO: No drivers installed. No devices found that match driver(s)
contained in
'C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf'.
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0xE000020B)
DIFXAPP: INFO: The device(s) for which the driver is being installed has not
been plugged into the computer.
DIFXAPP: INFO: ENTER: DriverPackageGetPathW
DIFXAPP: INFO: RETURN: DriverPackageGetPathW (0x7A)
DIFXAPP: INFO: ENTER: DriverPackageGetPathW
DIFXAPP: INFO: RETURN: DriverPackageGetPathW (0x0)
DIFXAPP: INFO: driver store entry for 'C:\Program Files\Xen PV
Drivers\drivers\xenpci\xenpci.inf' is
'C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf'.
DIFXAPP: INFO: The component Id '{D6BB9B5F-61F9-4B6E-8FAD-289706F5EBEB}' is now
set to point to driver store:
'C:\Windows\System32\DriverStore\FileRepository\xenpci.inf_x86_neutral_232bc49777803725\xenpci.inf'
DIFXAPP: INFO: A reboot is not needed to install the component
'{D6BB9B5F-61F9-4B6E-8FAD-289706F5EBEB}'.
DIFXAPP: RETURN: InstallDriverPackages() 0 (0x0)
Action 1:11:12: WaitForDevices.
And sure enough I did not have a Xen PCI platform device.
The reason being that I had this in my guest configuration file:
#-----------------------------------------------------------------------------
# Enable/disable xen platform PCI device, default=1 (enabled)
xen_platform_pci=0
Changing it to 1 made the installer work. After two reboots
my Windows 7 guest is running with the PV drivers.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home