WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] Re: [Xen-users] Xen VGA Passthrough with Core CPU integrated

Adding xen-devel to the CC list..
Has someone tried Core CPU integrated graphics with Xen VGA passthru?

-- Pasi

On Mon, Dec 27, 2010 at 04:03:48PM +0100, Rome Pierce wrote:
> Here it is:
> 
> 00:02.0 VGA compatible controller: Intel Corporation Core Processor 
> Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
>         Subsystem: Micro-Star International Co., Ltd. Device 7636
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at fb800000 (64-bit, non-prefetchable) [disabled] 
> [size=4M]
>         Region 2: Memory at d0000000 (64-bit, prefetchable) [disabled] 
> [size=256M]
>         Region 4: I/O ports at cc00 [disabled] [size=8]
>         Expansion ROM at <unassigned> [disabled]
>         Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
>                 Address: fee0200c  Data: 4141
>         Capabilities: [d0] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [a4] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: pciback
> 
> 
> greets Romep
> 
> 
> -------- Original-Nachricht --------
> > Datum: Mon, 27 Dec 2010 16:04:32 +0200
> > Von: "Pasi Kärkkäinen" <pasik@xxxxxx>
> > An: Rome Pierce <romep@xxxxxx>
> > CC: xen-users@xxxxxxxxxxxxxxxxxxx, tknchris@xxxxxxxxx
> > Betreff: Re: [Xen-users] VGA Passthrough
> 
> > On Mon, Dec 27, 2010 at 01:53:53PM +0100, Rome Pierce wrote:
> > > I don't know what i changed, but i'm at the point where i can start the
> > vm and install windows 7, but if i install the Intel HD video driver and
> > reboot, the vm crashes. The iommu errors in xm dmesg are gone. Everything
> > looks ok, but qemu logfile ends with: "reset requested in cpu_handle_ioreq".
> > xend.log contains: " INFO (pciquirk:92) NO quirks found for PCI device
> > [8086:0042:1462:7636]"
> > > Don't know if the xend.log message has something to do with the crash.
> > > 
> > 
> > Ok.
> > 
> > Can you paste "lspci -vvv" for the Intel VGA adapter from dom0.
> > 
> > -- Pasi
> > 
> > > 
> > > 
> > > domid: 6
> > > -c config qemu network with xen bridge for
> > > tap6.0 eth0
> > > Using file /data/vms/win7_mediacenter.img in read-write mode
> > > Watching /local/domain/0/device-model/6/logdirty/cmd
> > > Watching /local/domain/0/device-model/6/command
> > > char device redirected to /dev/pts/2
> > > qemu_map_cache_init nr_buckets = 10000 size 4194304
> > > shared page at pfn feffd
> > > buffered io page at pfn feffb
> > > Guest uuid = 8b78bc7f-0e05-2114-cc17-5941102bbffe
> > > Time offset set 0
> > > Register xen platform.
> > > Done register platform.
> > > platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw
> > state.
> > > xs_read(/local/domain/0/device-model/6/xen_extended_power_mgmt): read
> > error
> > > xs_read(): vncpasswd get error.
> > /vm/8b78bc7f-0e05-2114-cc17-5941102bbffe/vncpasswd.
> > > Log-dirty: no command yet.
> > > I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
> > > xs_read(/local/domain/6/log-throttling): read error
> > > qemu: ignoring not-understood drive `/local/domain/6/log-throttling'
> > > medium change watch on `/local/domain/6/log-throttling' - unknown
> > device, ignored
> > > dm-command: hot insert pass-through pci dev
> > > register_real_device: Assigning real physical device 00:02.0 ...
> > > register_real_device: Enable MSI translation via per device option
> > > register_real_device: Disable power management
> > > pt_iomul_init: Error: pt_iomul_init can't open file /dev/xen/pci_iomul:
> > No such file or directory: 0x0:0x2.0x0
> > > pt_register_regions: IO region registered (size=0x00400000
> > base_addr=0xfb800004)
> > > pt_register_regions: IO region registered (size=0x10000000
> > base_addr=0xd000000c)
> > > pt_register_regions: IO region registered (size=0x00000008
> > base_addr=0x0000cc01)
> > > setup_vga_pt: vga bios checksum is adjusted!
> > > pt_msi_setup: msi mapped with pirq 37
> > > pci_intx: intx=1
> > > register_real_device: Real physical device 00:02.0 registered
> > successfuly!
> > > IRQ type = MSI-INTx
> > > pt_iomem_map: e_phys=e0000000 maddr=d0000000 type=8 len=268435456
> > index=2 first_map=1
> > > pt_iomem_map: e_phys=f1000000 maddr=fb800000 type=0 len=4194304 index=0
> > first_map=1
> > > pt_ioport_map: e_phys=c230 pio_base=cc00 len=8 index=4 first_map=1
> > > platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw
> > state.
> > > platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro
> > state.
> > > pt_iomem_map: e_phys=ffffffff maddr=fb800000 type=0 len=4194304 index=0
> > first_map=0
> > > pt_iomem_map: e_phys=ffffffff maddr=d0000000 type=8 len=268435456
> > index=2 first_map=0
> > > pt_ioport_map: e_phys=ffff pio_base=cc00 len=8 index=4 first_map=0
> > > pt_iomem_map: e_phys=f1000000 maddr=fb800000 type=0 len=4194304 index=0
> > first_map=0
> > > pt_iomem_map: e_phys=e0000000 maddr=d0000000 type=8 len=268435456
> > index=2 first_map=0
> > > pt_ioport_map: e_phys=c230 pio_base=cc00 len=8 index=4 first_map=0
> > > pt_iomem_map: e_phys=ffffffff maddr=fb800000 type=0 len=4194304 index=0
> > first_map=0
> > > pt_iomem_map: e_phys=ffffffff maddr=d0000000 type=8 len=268435456
> > index=2 first_map=0
> > > pt_ioport_map: e_phys=ffff pio_base=cc00 len=8 index=4 first_map=0
> > > pt_iomem_map: e_phys=f1000000 maddr=fb800000 type=0 len=4194304 index=0
> > first_map=0
> > > pt_iomem_map: e_phys=e0000000 maddr=d0000000 type=8 len=268435456
> > index=2 first_map=0
> > > pt_ioport_map: e_phys=c230 pio_base=cc00 len=8 index=4 first_map=0
> > > pt_msgctrl_reg_write: guest enabling MSI, disable MSI-INTx translation
> > > pci_intx: intx=1
> > > pt_msi_update: Update msi with pirq 37 gvec b0 gflags 0
> > > reset requested in cpu_handle_ioreq.
> > > Issued domain 6 reboot
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > -------- Original-Nachricht --------
> > > > Datum: Sun, 26 Dec 2010 20:33:28 +0100
> > > > Von: "Rome Pierce" <romep@xxxxxx>
> > > > An: "Pasi Kärkkäinen" <pasik@xxxxxx>
> > > > CC: tknchris@xxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Betreff: Re: [Xen-users] VGA Passthrough
> > > 
> > > > Binding the GPU to pciback causes the previous error.
> > > > 
> > > > 
> > > > -------- Original-Nachricht --------
> > > > > Datum: Sun, 26 Dec 2010 21:31:05 +0200
> > > > > Von: "Pasi Kärkkäinen" <pasik@xxxxxx>
> > > > > An: Rome Pierce <romep@xxxxxx>
> > > > > CC: xen-users@xxxxxxxxxxxxxxxxxxx, tknchris@xxxxxxxxx
> > > > > Betreff: Re: [Xen-users] VGA Passthrough
> > > > 
> > > > > On Sun, Dec 26, 2010 at 08:09:33PM +0100, Rome Pierce wrote:
> > > > > > I didn't start any vm. So there was no qemu logfile. But i think i
> > > > made
> > > > > another step into the right direction! I hided the GPU device during
> > > > boot
> > > > > of dom0. But i think i had to bind it to pci-stub. After some
> > testing i
> > > > > found that the module wasn't loaded. => modprobe pci-stub. Then i
> > needed
> > > > to
> > > > > bind the GPU to pci-stub:
> > > > > > 
> > > > > > modprobe pci-stub
> > > > > > echo "8086 0042" > /sys/bus/pci/drivers/pci-stub/new_id
> > > > > > echo "0000:00:02.0" >
> > /sys/bus/pci/devices/0000:00:02.0/driver/unbind
> > > > > > echo "0000:00:02.0" > /sys/bus/pci/drivers/pci-stub/bind
> > > > > > 
> > > > > 
> > > > > Nowadays you should use xen-pciback instead of pci-stub.
> > > > > 
> > > > > -- Pasi
> > > > > 
> > > > > > The iGPU appears in xm pci-list-assignable-devices.
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > But now i get another error when starting "xm create domname.cfg":
> > > > > > 
> > > > > > "
> > > > > > Using config file "/path/to/cfg/domname.cfg".
> > > > > > Error: (22, 'Invalid argument')
> > > > > > "
> > > > > > 
> > > > > > My config file:
> > > > > > 
> > > > > > name = 'domname'
> > > > > > kernel = '/usr/lib/xen/boot/hvmloader'
> > > > > > builder = 'hvm'
> > > > > > device_model = '/usr/lib64/xen/bin/qemu-dm'
> > > > > > memory = 1024
> > > > > > acpi=1
> > > > > > apic=1
> > > > > > 
> > > > > > vif = [ 'bridge=eth0,mac=xx:xx:xx:xx:xx:xx' ]
> > > > > > 
> > > > > > disk = [ 'file:/path/to/domname.img,hda,w' ]
> > > > > > 
> > > > > > boot='c'
> > > > > > usbdevice='tablet'
> > > > > > 
> > > > > > vnc=1 
> > > > > > vnclisten='0.0.0.0' 
> > > > > > vncpasswd='' 
> > > > > > sdl=0 
> > > > > > 
> > > > > > stdvga=0 
> > > > > > serial='pty' 
> > > > > > 
> > > > > > gfx_passthru=1
> > > > > > pci = [ '00:02.0' ]
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > Obviously the iGPU was successfully assigned to the vm. The qemu
> > > > > logfile:
> > > > > > 
> > > > > > domid: 4
> > > > > > -c config qemu network with xen bridge for
> > > > > > tap4.0 eth0
> > > > > > Using file /data/vms/win7_mediacenter.img in read-write mode
> > > > > > Watching /local/domain/0/device-model/4/logdirty/cmd
> > > > > > Watching /local/domain/0/device-model/4/command
> > > > > > char device redirected to /dev/pts/2
> > > > > > qemu_map_cache_init nr_buckets = 10000 size 4194304
> > > > > > shared page at pfn feffd
> > > > > > buffered io page at pfn feffb
> > > > > > Guest uuid = dcc4de87-0225-beb6-2665-b261cb34da83
> > > > > > Time offset set 0
> > > > > > Register xen platform.
> > > > > > Done register platform.
> > > > > > platform_fixed_ioport: changed ro/rw state of ROM memory area. now
> > is
> > > > rw
> > > > > state.
> > > > > > xs_read(/local/domain/0/device-model/4/xen_extended_power_mgmt):
> > read
> > > > > error
> > > > > > xs_read(): vncpasswd get error.
> > > > > /vm/dcc4de87-0225-beb6-2665-b261cb34da83/vncpasswd.
> > > > > > Log-dirty: no command yet.
> > > > > > I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0,
> > size: 0
> > > > > > xs_read(/local/domain/4/log-throttling): read error
> > > > > > qemu: ignoring not-understood drive
> > `/local/domain/4/log-throttling'
> > > > > > medium change watch on `/local/domain/4/log-throttling' - unknown
> > > > > device, ignored
> > > > > > dm-command: hot insert pass-through pci dev
> > > > > > register_real_device: Assigning real physical device 00:02.0 ...
> > > > > > register_real_device: Enable MSI translation via per device option
> > > > > > register_real_device: Disable power management
> > > > > > pt_iomul_init: Error: pt_iomul_init can't open file
> > > > /dev/xen/pci_iomul:
> > > > > No such file or directory: 0x0:0x2.0x0
> > > > > > pt_register_regions: IO region registered (size=0x00400000
> > > > > base_addr=0xfb800004)
> > > > > > pt_register_regions: IO region registered (size=0x10000000
> > > > > base_addr=0xd000000c)
> > > > > > pt_register_regions: IO region registered (size=0x00000008
> > > > > base_addr=0x0000cc01)
> > > > > > setup_vga_pt: vga bios checksum is adjusted!
> > > > > > register_real_device: Error: Mapping irq failed, rc = -1
> > > > > > pt_msi_setup: msi mapped with pirq 37
> > > > > > pci_intx: intx=1
> > > > > > register_real_device: Real physical device 00:02.0 registered
> > > > > successfuly!
> > > > > > IRQ type = MSI-INTx
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > > -------- Original-Nachricht --------
> > > > > > > Datum: Sun, 26 Dec 2010 19:38:45 +0200
> > > > > > > Von: "Pasi Kärkkäinen" <pasik@xxxxxx>
> > > > > > > An: Rome Pierce <romep@xxxxxx>
> > > > > > > CC: tknchris@xxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > Betreff: Re: [Xen-users] VGA Passthrough
> > > > > > 
> > > > > > > On Sun, Dec 26, 2010 at 06:37:16PM +0100, Rome Pierce wrote:
> > > > > > > > Hey,
> > > > > > > > 
> > > > > > > > i can't see anything related in the files. I appended them to
> > this
> > > > > > > email. Maybe you could use them to help me.
> > > > > > > > 
> > > > > > > 
> > > > > > > Note that there should be a logfile for qemu (-dm) aswell..
> > > > > > > 
> > > > > > > -- Pasi
> > > > > > > 
> > > > > > > > Greets
> > > > > > > > Romep
> > > > > > > > 
> > > > > > > > -------- Original-Nachricht --------
> > > > > > > > > Datum: Sun, 26 Dec 2010 18:47:19 +0200
> > > > > > > > > Von: "Pasi Kärkkäinen" <pasik@xxxxxx>
> > > > > > > > > An: Rome Pierce <romep@xxxxxx>
> > > > > > > > > CC: xen-users@xxxxxxxxxxxxxxxxxxx, tknchris@xxxxxxxxx
> > > > > > > > > Betreff: Re: [Xen-users] VGA Passthrough
> > > > > > > > 
> > > > > > > > > On Sun, Dec 26, 2010 at 04:55:54PM +0100, Rome Pierce wrote:
> > > > > > > > > > I didn't modify the XEN kernel. It's a debian squeeze
> > > > > installation.
> > > > > > > It
> > > > > > > > > comes with precompiled XEN kernel 4.0.1. I got a integrated
> > GPU
> > > > in
> > > > > my
> > > > > > > intel
> > > > > > > > > clarkdale (i5-650) CPU. I read that the intel integrated
> > GPUs
> > > > > would
> > > > > > > work
> > > > > > > > > with XEN. Couldn't find anything in the wiki or on the list,
> > so
> > > > i
> > > > > > > thought it
> > > > > > > > > would work out of the box with Intel GPUs.
> > > > > > > > > > 
> > > > > > > > > > Here comes the complete "xm dmesg" with iommu=verbose:
> > > > > > > > > > 
> > > > > > > > > 
> > > > > > > > > Ok. How about dom0 linux "dmesg" output? Anything related in
> > it?
> > > > > > > > > Also check /var/log/xen/*
> > > > > > > > > 
> > > > > > > > > -- Pasi
> > > > > > > > > 
> > > > > > > > > > 
> > > > > > > > > > (XEN) Xen version 4.0.1 (Debian 4.0.1-1)
> > (waldi@xxxxxxxxxx)
> > > > (gcc
> > > > > > > version
> > > > > > > > > 4.4.5 20100824 (prerelease) (Debian 4.4.4-11) ) Fri Sep  3
> > > > > 15:38:12
> > > > > > > UTC
> > > > > > > > > 2010
> > > > > > > > > > (XEN) Bootloader: GRUB 1.98+20100804-10
> > > > > > > > > > (XEN) Command line: placeholder iommu=verbose
> > > > > > > > > > (XEN) Video information:
> > > > > > > > > > (XEN)  VGA is text mode 80x25, font 8x16
> > > > > > > > > > (XEN)  VBE/DDC methods: none; EDID transfer time: 0
> > seconds
> > > > > > > > > > (XEN)  EDID info not retrieved because no DDC retrieval
> > method
> > > > > > > detected
> > > > > > > > > > (XEN) Disc information:
> > > > > > > > > > (XEN)  Found 1 MBR signatures
> > > > > > > > > > (XEN)  Found 1 EDD information structures
> > > > > > > > > > (XEN) Xen-e820 RAM map:
> > > > > > > > > > (XEN)  0000000000000000 - 000000000009e800 (usable)
> > > > > > > > > > (XEN)  000000000009e800 - 00000000000a0000 (reserved)
> > > > > > > > > > (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> > > > > > > > > > (XEN)  0000000000100000 - 00000000b3780000 (usable)
> > > > > > > > > > (XEN)  00000000b3780000 - 00000000b378e000 (ACPI data)
> > > > > > > > > > (XEN)  00000000b378e000 - 00000000b37d0000 (ACPI NVS)
> > > > > > > > > > (XEN)  00000000b37d0000 - 00000000b37e0000 (reserved)
> > > > > > > > > > (XEN)  00000000b37ed000 - 00000000c0000000 (reserved)
> > > > > > > > > > (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> > > > > > > > > > (XEN)  00000000ffe00000 - 0000000100000000 (reserved)
> > > > > > > > > > (XEN)  0000000100000000 - 0000000138000000 (usable)
> > > > > > > > > > (XEN) ACPI: RSDP 000FA2A0, 0014 (r0 ACPIAM)
> > > > > > > > > > (XEN) ACPI: RSDT B3780000, 0044 (r1 7636MS A7636100
> > 20100914
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: FACP B3780200, 0084 (r1 7636MS A7636100
> > 20100914
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: DSDT B37805E0, 747E (r1  A7636 A7636100     
> > 100
> > > > > INTL
> > > > > > > > > 20051117)
> > > > > > > > > > (XEN) ACPI: FACS B378E000, 0040
> > > > > > > > > > (XEN) ACPI: APIC B3780390, 008C (r1 7636MS A7636100
> > 20100914
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: MCFG B3780420, 003C (r1 7636MS OEMMCFG 
> > 20100914
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: OEMB B378E040, 0072 (r1 7636MS A7636100
> > 20100914
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: HPET B378A5E0, 0038 (r1 7636MS OEMHPET 
> > 20100914
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: GSCI B378E0C0, 2024 (r1 7636MS GMCHSCI 
> > 20100914
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: DMAR B37900F0, 0140 (r1    AMI  OEMDMAR       
> > 1
> > > > > MSFT   
> > > > > > >   
> > > > > > > > > 97)
> > > > > > > > > > (XEN) ACPI: SSDT B3791C80, 0363 (r1 DpgPmm    CpuPm      
> > 12
> > > > > INTL
> > > > > > > > > 20051117)
> > > > > > > > > > (XEN) System RAM: 3767MB (3857528kB)
> > > > > > > > > > (XEN) Domain heap initialised
> > > > > > > > > > (XEN) Processor #0 6:5 APIC version 21
> > > > > > > > > > (XEN) Processor #4 6:5 APIC version 21
> > > > > > > > > > (XEN) Processor #1 6:5 APIC version 21
> > > > > > > > > > (XEN) Processor #5 6:5 APIC version 21
> > > > > > > > > > (XEN) IOAPIC[0]: apic_id 6, version 32, address
> > 0xfec00000,
> > > > GSI
> > > > > 0-23
> > > > > > > > > > (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> > > > > > > > > > (XEN) [VT-D]dmar.c:687: Host address width 36
> > > > > > > > > > (XEN) [VT-D]dmar.c:702: found ACPI_DMAR_DRHD:
> > > > > > > > > > (XEN) [VT-D]dmar.c:398:   dmaru->address = fed90000
> > > > > > > > > > (XEN) [VT-D]iommu.c:1081: drhd->address = fed90000
> > iommu->reg
> > > > =
> > > > > > > > > ffff82c3fff57000
> > > > > > > > > > (XEN) [VT-D]iommu.c:1083: cap = c9008020e30272 ecap = 1000
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1b.0
> > > > > > > > > > (XEN) [VT-D]dmar.c:702: found ACPI_DMAR_DRHD:
> > > > > > > > > > (XEN) [VT-D]dmar.c:398:   dmaru->address = fed91000
> > > > > > > > > > (XEN) [VT-D]iommu.c:1081: drhd->address = fed91000
> > iommu->reg
> > > > =
> > > > > > > > > ffff82c3fff56000
> > > > > > > > > > (XEN) [VT-D]iommu.c:1083: cap = c0000020230272 ecap = 1000
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:2.0
> > > > > > > > > > (XEN) [VT-D]dmar.c:702: found ACPI_DMAR_DRHD:
> > > > > > > > > > (XEN) [VT-D]dmar.c:398:   dmaru->address = fed93000
> > > > > > > > > > (XEN) [VT-D]iommu.c:1081: drhd->address = fed93000
> > iommu->reg
> > > > =
> > > > > > > > > ffff82c3fff55000
> > > > > > > > > > (XEN) [VT-D]iommu.c:1083: cap = c9008020630272 ecap = 1000
> > > > > > > > > > (XEN) [VT-D]dmar.c:412:   flags: INCLUDE_ALL
> > > > > > > > > > (XEN) [VT-D]dmar.c:707: found ACPI_DMAR_RMRR:
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.0
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.1
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.2
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.3
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.0
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.1
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.2
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.3
> > > > > > > > > > (XEN) [VT-D]dmar.c:579:   RMRR region: base_addr ed000
> > > > > end_address
> > > > > > > effff
> > > > > > > > > > (XEN) [VT-D]dmar.c:707: found ACPI_DMAR_RMRR:
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:2.0
> > > > > > > > > > (XEN) [VT-D]dmar.c:579:   RMRR region: base_addr b7c00000
> > > > > > > end_address
> > > > > > > > > bfffffff
> > > > > > > > > > (XEN) [VT-D]dmar.c:707: found ACPI_DMAR_RMRR:
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.0
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.1
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.2
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.3
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.0
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.1
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.2
> > > > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.3
> > > > > > > > > > (XEN) [VT-D]dmar.c:579:   RMRR region: base_addr b37ed000
> > > > > > > end_address
> > > > > > > > > b37fffff
> > > > > > > > > > (XEN) Using scheduler: SMP Credit Scheduler (credit)
> > > > > > > > > > (XEN) Detected 3192.071 MHz processor.
> > > > > > > > > > (XEN) Initing memory sharing.
> > > > > > > > > > (XEN) VMX: Supported advanced features:
> > > > > > > > > > (XEN)  - APIC MMIO access virtualisation
> > > > > > > > > > (XEN)  - APIC TPR shadow
> > > > > > > > > > (XEN)  - Extended Page Tables (EPT)
> > > > > > > > > > (XEN)  - Virtual-Processor Identifiers (VPID)
> > > > > > > > > > (XEN)  - Virtual NMI
> > > > > > > > > > (XEN)  - MSR direct-access bitmap
> > > > > > > > > > (XEN)  - Unrestricted Guest
> > > > > > > > > > (XEN) EPT supports 2MB super page.
> > > > > > > > > > (XEN) HVM: ASIDs enabled.
> > > > > > > > > > (XEN) HVM: VMX enabled
> > > > > > > > > > (XEN) HVM: Hardware Assisted Paging detected.
> > > > > > > > > > (XEN) Intel VT-d Snoop Control not supported.
> > > > > > > > > > (XEN) Intel VT-d DMA Passthrough not supported.
> > > > > > > > > > (XEN) Intel VT-d Queued Invalidation not supported.
> > > > > > > > > > (XEN) Intel VT-d Interrupt Remapping not supported.
> > > > > > > > > > (XEN) I/O virtualisation enabled
> > > > > > > > > > (XEN)  - Dom0 mode: Relaxed
> > > > > > > > > > (XEN) Enabled directed EOI with ioapic_ack_old on!
> > > > > > > > > > (XEN) Total of 4 processors activated.
> > > > > > > > > > (XEN) ENABLING IO-APIC IRQs
> > > > > > > > > > (XEN)  -> Using old ACK method
> > > > > > > > > > (XEN) TSC is reliable, synchronization unnecessary
> > > > > > > > > > (XEN) Platform timer is 14.318MHz HPET
> > > > > > > > > > (XEN) Allocated console ring of 16 KiB.
> > > > > > > > > > (XEN) Brought up 4 CPUs
> > > > > > > > > > (XEN) *** LOADING DOMAIN 0 ***
> > > > > > > > > > (XEN)  Xen  kernel: 64-bit, lsb, compat32
> > > > > > > > > > (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->
> > > > > 0x16b6000
> > > > > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > > > > > > > > > (XEN)  Dom0 alloc.:   0000000130000000->0000000134000000
> > > > (902692
> > > > > > > pages
> > > > > > > > > to be allocated)
> > > > > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > > > > > > > > > (XEN)  Loaded kernel: ffffffff81000000->ffffffff816b6000
> > > > > > > > > > (XEN)  Init. ramdisk: ffffffff816b6000->ffffffff8326ea00
> > > > > > > > > > (XEN)  Phys-Mach map: ffffffff8326f000->ffffffff83972120
> > > > > > > > > > (XEN)  Start info:    ffffffff83973000->ffffffff839734b4
> > > > > > > > > > (XEN)  Page tables:   ffffffff83974000->ffffffff83995000
> > > > > > > > > > (XEN)  Boot stack:    ffffffff83995000->ffffffff83996000
> > > > > > > > > > (XEN)  TOTAL:         ffffffff80000000->ffffffff83c00000
> > > > > > > > > > (XEN)  ENTRY ADDRESS: ffffffff81506200
> > > > > > > > > > (XEN) Dom0 has maximum 4 VCPUs
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:0.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:2.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:16.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.1
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.2
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.3
> > > > > > > > > > (XEN) [VT-D]iommu.c:1332: d0:PCIe: map bdf = 0:1b.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.1
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.2
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.3
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1f.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1f.2
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1f.3
> > > > > > > > > > (XEN) [VT-D]iommu.c:1332: d0:PCIe: map bdf = 1:0.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:0.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:0.1
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.0
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.1
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.2
> > > > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.3
> > > > > > > > > > (XEN) [VT-D]iommu.c:698: iommu_enable_translation:
> > iommu->reg
> > > > =
> > > > > > > > > ffff82c3fff56000
> > > > > > > > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Fault
> > Overflow
> > > > > > > > > > (XEN) [VT-D]iommu.c:824: iommu_fault_status: Primary
> > Pending
> > > > > Fault
> > > > > > > > > > (XEN) [VT-D]iommu.c:799: DMAR:[DMA Write] Request device
> > > > > [00:02.0]
> > > > > > > fault
> > > > > > > > > addr ffffff000, iommu reg = ffff82c3fff56000
> > > > > > > > > > (XEN) DMAR:[fault reason 05h] PTE Write access is not set
> > > > > > > > > > (XEN) print_vtd_entries: iommu = ffff830137cf8950 bdf =
> > 0:2.0
> > > > > gmfn =
> > > > > > > > > ffffff
> > > > > > > > > > (XEN)     root_entry = ffff830137c3b000
> > > > > > > > > > (XEN)     root_entry[0] = 7737001
> > > > > > > > > > (XEN)     context = ffff830007737000
> > > > > > > > > > (XEN)     context[10] = 1_80fe001
> > > > > > > > > > (XEN)     l3 = ffff8300080fe000
> > > > > > > > > > (XEN)     l3_index = 3f
> > > > > > > > > > (XEN)     l3[3f] = 0
> > > > > > > > > > (XEN)     l3[3f] not present
> > > > > > > > > > (XEN) [VT-D]iommu.c:698: iommu_enable_translation:
> > iommu->reg
> > > > =
> > > > > > > > > ffff82c3fff57000
> > > > > > > > > > (XEN) [VT-D]iommu.c:698: iommu_enable_translation:
> > iommu->reg
> > > > =
> > > > > > > > > ffff82c3fff55000
> > > > > > > > > > (XEN) Scrubbing Free RAM: .done.
> > > > > > > > > > (XEN) Xen trace buffers: disabled
> > > > > > > > > > (XEN) Std. Loglevel: Errors and warnings
> > > > > > > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
> > > > > warnings)
> > > > > > > > > > (XEN) Xen is relinquishing VGA console.
> > > > > > > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times
> > to
> > > > > switch
> > > > > > > > > input to Xen)
> > > > > > > > > > (XEN) Freed 176kB init memory.
> > > > > > > > > > (XEN) save.c:72:d0 Domain 1 expects freq 3192MHz but
> > host's
> > > > freq
> > > > > is
> > > > > > > > > 3192MHz: trap and emulate rdtsc
> > > > > > > > > > (XEN) save.c:72:d0 Domain 2 expects freq 3192MHz but
> > host's
> > > > freq
> > > > > is
> > > > > > > > > 3192MHz: trap and emulate rdtsc
> > > > > > > > > > (XEN) save.c:72:d0 Domain 3 expects freq 3192MHz but
> > host's
> > > > freq
> > > > > is
> > > > > > > > > 3192MHz: trap and emulate rdtsc
> > > > > > > > > > 
> > > > > > > > > > greets
> > > > > > > > > > Romep
> > > > > > > > > > 
> > > > > > > > > > -------- Original-Nachricht --------
> > > > > > > > > > > Datum: Sun, 26 Dec 2010 16:12:00 +0200
> > > > > > > > > > > Von: "Pasi Kärkkäinen" <pasik@xxxxxx>
> > > > > > > > > > > An: Rome Pierce <romep@xxxxxx>
> > > > > > > > > > > CC: tknchris@xxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > Betreff: Re: [Xen-users] VGA Passthrough
> > > > > > > > > > 
> > > > > > > > > > > On Sun, Dec 26, 2010 at 01:45:06PM +0100, Rome Pierce
> > wrote:
> > > > > > > > > > > > Hello,
> > > > > > > > > > > > 
> > > > > > > > > > > > i think it has something to do with this:
> > > > > > > > > > > > 
> > > > > > > > > > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Fault
> > > > Overflow
> > > > > > > > > > > > (XEN) [VT-D]iommu.c:824: iommu_fault_status: Primary
> > > > Pending
> > > > > > > Fault
> > > > > > > > > > > > (XEN) [VT-D]iommu.c:799: DMAR:[DMA Write] Request
> > device
> > > > > > > [00:02.0]
> > > > > > > > > fault
> > > > > > > > > > > addr ffffff000, iommu reg = ffff82c3fff56000
> > > > > > > > > > > > (XEN) DMAR:[fault reason 05h] PTE Write access is not
> > set
> > > > > > > > > > > > (XEN) print_vtd_entries: iommu = ffff830137cf8950 bdf
> > =
> > > > > 0:2.0
> > > > > > > gmfn =
> > > > > > > > > > > ffffff
> > > > > > > > > > > > (XEN)     root_entry = ffff830137c3b000
> > > > > > > > > > > > (XEN)     root_entry[0] = 7737001
> > > > > > > > > > > > (XEN)     context = ffff830007737000
> > > > > > > > > > > > (XEN)     context[10] = 1_80fe001
> > > > > > > > > > > > (XEN)     l3 = ffff8300080fe000
> > > > > > > > > > > > (XEN)     l3_index = 3f
> > > > > > > > > > > > (XEN)     l3[3f] = 0
> > > > > > > > > > > > (XEN)     l3[3f] not present
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > VT-d is supported and enabled in bios. Kernel
> > Parameter
> > > > are
> > > > > > > vtd=1
> > > > > > > > > and
> > > > > > > > > > > intel_iommu=on
> > > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > vtd=1 is an old option, and it's ignored by new Xen
> > > > versions.
> > > > > > > > > > > You should have iommu=verbose parameter set for *Xen*
> > > > > hypervisor
> > > > > > > > > (xen.gz).
> > > > > > > > > > > 
> > > > > > > > > > > But yeah, the above looks like the problem..
> > > > > > > > > > > 
> > > > > > > > > > > Did you modify Xen sources manually? Many VGA cards
> > require
> > > > > manual
> > > > > > > > > > > tuning and won't work out-of-the-box ..
> > > > > > > > > > > 
> > > > > > > > > > > -- Pasi
> > > > > > > > > > > 
> > > > > > > > > > > 
> > > > > > > > > > > > Merry X-max
> > > > > > > > > > > > Romep
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > -------- Original-Nachricht --------
> > > > > > > > > > > > > Datum: Tue, 21 Dec 2010 10:55:26 +0100
> > > > > > > > > > > > > Von: "Rome Pierce" <romep@xxxxxx>
> > > > > > > > > > > > > An: "Pasi Kärkkäinen" <pasik@xxxxxx>,
> > > > tknchris@xxxxxxxxx
> > > > > > > > > > > > > CC: xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > > > Betreff: Re: [Xen-users] VGA Passthrough
> > > > > > > > > > > > 
> > > > > > > > > > > > > Well, i don't comment on these answers .. I solved
> > it on
> > > > > my
> > > > > > > own
> > > > > > > > > now.
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > My Windows 7 Pro virtual machine installs but when
> > > > Windows
> > > > > > > > > installs
> > > > > > > > > > > all
> > > > > > > > > > > > > the updates (Intel HD graphics driver) i can't start
> > the
> > > > > > > machine
> > > > > > > > > > > again. I got
> > > > > > > > > > > > > a clarkdale cpu with integrated gpu and the Intel
> > gpu's
> > > > > should
> > > > > > > > > work?
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > 
> > > > > > > > > > > > > -------- Original-Nachricht --------
> > > > > > > > > > > > > > Datum: Mon, 20 Dec 2010 22:24:21 +0200
> > > > > > > > > > > > > > Von: "Pasi Kärkkäinen" <pasik@xxxxxx>
> > > > > > > > > > > > > > An: chris <tknchris@xxxxxxxxx>
> > > > > > > > > > > > > > CC: Rome Pierce <romep@xxxxxx>,
> > > > > > > xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > > > > Betreff: Re: [Xen-users] VGA Passthrough
> > > > > > > > > > > > > 
> > > > > > > > > > > > > > On Mon, Dec 20, 2010 at 02:10:44PM -0500, chris
> > wrote:
> > > > > > > > > > > > > > >
> > http://wiki.xensource.com/xenwiki/XenVGAPassthrough
> > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > And this one, also linked on the wiki page above:
> > > > > > > > > > > > > >
> > http://wiki.xensource.com/xenwiki/XenPCIpassthrough
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > -- Pasi
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > On Mon, Dec 20, 2010 at 1:20 PM, Rome Pierce
> > > > > > > <romep@xxxxxx>
> > > > > > > > > wrote:
> > > > > > > > > > > > > > > > Hello,
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > i just installed Debian Squeeze and the Xen
> > 4.0.1
> > > > > debian
> > > > > > > > > > > packages. I
> > > > > > > > > > > > > > want to passthrough vga to a Windows 7 virtual
> > > > machine.
> > > > > But
> > > > > > > i
> > > > > > > > > always
> > > > > > > > > > > get
> > > > > > > > > > > > > an
> > > > > > > > > > > > > > error (Error: pci: PCI Backend and pci-stub don't
> > own
> > > > > device
> > > > > > > > > > > > > 0000:00:02.0).
> > > > > > > > > > > > > > What am i doing wrong? My config file looks like
> > this:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > name = 'win7'
> > > > > > > > > > > > > > > > kernel = '/usr/lib/xen/boot/hvmloader'
> > > > > > > > > > > > > > > > builder = 'hvm'
> > > > > > > > > > > > > > > > device_model = '/usr/lib64/xen/bin/qemu-dm'
> > > > > > > > > > > > > > > > memory = 1024
> > > > > > > > > > > > > > > > acpi=1
> > > > > > > > > > > > > > > > apic=1
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > vif = [ 'bridge=eth0' ]
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > disk = [ 'file:/path/to/win7.img,hda,w',
> > > > > > > > > > > > > > 'file:/path/to/win7.iso,hdc:cdrom,r' ]
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > boot='dc'
> > > > > > > > > > > > > > > > usbdevice='tablet'
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > vnc=1
> > > > > > > > > > > > > > > > vnclisten = '0.0.0.0'
> > > > > > > > > > > > > > > > vncpasswd=''
> > > > > > > > > > > > > > > > sdl=0
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > stdvga=0
> > > > > > > > > > > > > > > > serial='pty'
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > gfx_passthru=0
> > > > > > > > > > > > > > > > pci=[ '00:02.0' ]
> > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > GMX DSL Doppel-Flat ab 19,99 Euro/mtl.! Jetzt
> > auch
> > > > > mit
> > > > > > > > > > > > > > > > gratis Notebook-Flat!
> > > > > http://portal.gmx.net/de/go/dsl
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > _______________________________________________
> > > > > > > > > > > > > > > > Xen-users mailing list
> > > > > > > > > > > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > > > > > > http://lists.xensource.com/xen-users
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > > > Xen-users mailing list
> > > > > > > > > > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > > > > > http://lists.xensource.com/xen-users
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > > Xen-users mailing list
> > > > > > > > > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > > > > http://lists.xensource.com/xen-users
> > > > > > > > > > > > > 
> > > > > > > > > > > > > -- 
> > > > > > > > > > > > > GRATIS! Movie-FLAT mit über 300 Videos. 
> > > > > > > > > > > > > Jetzt freischalten unter
> > > > > http://portal.gmx.net/de/go/maxdome
> > > > > > > > > > > > > 
> > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > Xen-users mailing list
> > > > > > > > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > > > http://lists.xensource.com/xen-users
> > > > > > > > > > > > 
> > > > > > > > > > > > -- 
> > > > > > > > > > > > NEU: FreePhone - kostenlos mobil telefonieren und
> > > > surfen!                 
> > > > > > > > > > > > Jetzt informieren: http://www.gmx.net/de/go/freephone
> > > > > > > > > > > 
> > > > > > > > > > > _______________________________________________
> > > > > > > > > > > Xen-users mailing list
> > > > > > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > http://lists.xensource.com/xen-users
> > > > > > > > > > 
> > > > > > > > > > -- 
> > > > > > > > > > Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
> > > > > > > > > > belohnen Sie mit bis zu 100,- Euro!
> > > > > > > https://freundschaftswerbung.gmx.de
> > > > > > > > 
> > > > > > > > -- 
> > > > > > > > GMX DSL Doppel-Flat ab 19,99 Euro/mtl.! Jetzt auch mit 
> > > > > > > > gratis Notebook-Flat! http://portal.gmx.net/de/go/dsl
> > > > > > > 
> > > > > > > > [    0.000000] Initializing cgroup subsys cpuset
> > > > > > > > [    0.000000] Initializing cgroup subsys cpu
> > > > > > > > [    0.000000] Linux version 2.6.32-5-xen-amd64 (Debian
> > 2.6.32-29)
> > > > > > > (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1
> > SMP
> > > > Fri
> > > > > Dec 10
> > > > > > > 17:41:50 UTC 2010
> > > > > > > > [    0.000000] Command line: placeholder
> > > > > > > root=UUID=a7fcc19f-454f-4ec2-a591-e401d4c792c1 ro quiet
> > > > > > > xen-pciback.hide=(0000:00:1a.0)(0000:00:02.0)(0000:00:1b.0)
> > > > > > > > [    0.000000] KERNEL supported cpus:
> > > > > > > > [    0.000000]   Intel GenuineIntel
> > > > > > > > [    0.000000]   AMD AuthenticAMD
> > > > > > > > [    0.000000]   Centaur CentaurHauls
> > > > > > > > [    0.000000] xen_release_chunk: looking at area pfn
> > b37e0-b37ed:
> > > > > 13
> > > > > > > pages freed
> > > > > > > > [    0.000000] xen_release_chunk: looking at area pfn
> > c0000-e0624:
> > > > > > > 132644 pages freed
> > > > > > > > [    0.000000] released 132657 pages of unused memory
> > > > > > > > [    0.000000] BIOS-provided physical RAM map:
> > > > > > > > [    0.000000]  Xen: 0000000000000000 - 000000000009e800
> > (usable)
> > > > > > > > [    0.000000]  Xen: 000000000009e800 - 0000000000100000
> > > > (reserved)
> > > > > > > > [    0.000000]  Xen: 0000000000100000 - 00000000b3780000
> > (usable)
> > > > > > > > [    0.000000]  Xen: 00000000b3780000 - 00000000b378e000 (ACPI
> > > > data)
> > > > > > > > [    0.000000]  Xen: 00000000b378e000 - 00000000b37d0000 (ACPI
> > > > NVS)
> > > > > > > > [    0.000000]  Xen: 00000000b37d0000 - 00000000b37e0000
> > > > (reserved)
> > > > > > > > [    0.000000]  Xen: 00000000b37ed000 - 00000000c0000000
> > > > (reserved)
> > > > > > > > [    0.000000]  Xen: 00000000fec00000 - 00000000fec01000
> > > > (reserved)
> > > > > > > > [    0.000000]  Xen: 00000000fee00000 - 00000000fee01000
> > > > (reserved)
> > > > > > > > [    0.000000]  Xen: 00000000ffe00000 - 0000000100000000
> > > > (reserved)
> > > > > > > > [    0.000000] DMI present.
> > > > > > > > [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM,
> > > > working
> > > > > > > around it.
> > > > > > > > [    0.000000] e820 update range: 0000000000000000 -
> > > > > 0000000000010000
> > > > > > > (usable) ==> (reserved)
> > > > > > > > [    0.000000] last_pfn = 0xb3780 max_arch_pfn = 0x400000000
> > > > > > > > [    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
> > > > > > > 0x7010600070106
> > > > > > > > [    0.000000] initial memory mapped : 0 - 20000000
> > > > > > > > [    0.000000] init_memory_mapping:
> > > > > 0000000000000000-00000000b3780000
> > > > > > > > [    0.000000]  0000000000 - 00b3780000 page 4k
> > > > > > > > [    0.000000] kernel direct mapping tables up to b3780000 @
> > > > > > > 100000-6a0000
> > > > > > > > [    0.000000] RAMDISK: 016b6000 - 0326ea00
> > > > > > > > [    0.000000] ACPI: RSDP 00000000000fa2a0 00014 (v00 ACPIAM)
> > > > > > > > [    0.000000] ACPI: RSDT 00000000b3780000 00044 (v01 7636MS
> > > > > A7636100
> > > > > > > 20100914 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: FACP 00000000b3780200 00084 (v01 7636MS
> > > > > A7636100
> > > > > > > 20100914 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: DSDT 00000000b37805e0 0747E (v01  A7636
> > > > > A7636100
> > > > > > > 00000100 INTL 20051117)
> > > > > > > > [    0.000000] ACPI: FACS 00000000b378e000 00040
> > > > > > > > [    0.000000] ACPI: APIC 00000000b3780390 0008C (v01 7636MS
> > > > > A7636100
> > > > > > > 20100914 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: MCFG 00000000b3780420 0003C (v01 7636MS
> > > > OEMMCFG
> > > > > > > 20100914 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: OEMB 00000000b378e040 00072 (v01 7636MS
> > > > > A7636100
> > > > > > > 20100914 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: HPET 00000000b378a5e0 00038 (v01 7636MS
> > > > OEMHPET
> > > > > > > 20100914 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: GSCI 00000000b378e0c0 02024 (v01 7636MS
> > > > GMCHSCI
> > > > > > > 20100914 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: XMAR 00000000b37900f0 00140 (v01    AMI 
> > > > > OEMDMAR
> > > > > > > 00000001 MSFT 00000097)
> > > > > > > > [    0.000000] ACPI: SSDT 00000000b3791c80 00363 (v01 DpgPmm  
> > > > > CpuPm
> > > > > > > 00000012 INTL 20051117)
> > > > > > > > [    0.000000] ACPI: Local APIC address 0xfee00000
> > > > > > > > [    0.000000] No NUMA configuration found
> > > > > > > > [    0.000000] Faking a node at
> > 0000000000000000-00000000b3780000
> > > > > > > > [    0.000000] Bootmem setup node 0
> > > > > 0000000000000000-00000000b3780000
> > > > > > > > [    0.000000]   NODE_DATA [0000000000010000 -
> > 0000000000017fff]
> > > > > > > > [    0.000000]   bootmap [0000000000018000 - 
> > 000000000002e6ef]
> > > > > pages 17
> > > > > > > > [    0.000000] (8 early reservations) ==> bootmem [0000000000
> > -
> > > > > > > 00b3780000]
> > > > > > > > [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page
> > ==>
> > > > > > > [0000000000 - 0000001000]
> > > > > > > > [    0.000000]   #1 [0003974000 - 0003995000]   XEN PAGETABLES
> > ==>
> > > > > > > [0003974000 - 0003995000]
> > > > > > > > [    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE
> > ==>
> > > > > > > [0000006000 - 0000008000]
> > > > > > > > [    0.000000]   #3 [0001000000 - 0001695994]    TEXT DATA BSS
> > ==>
> > > > > > > [0001000000 - 0001695994]
> > > > > > > > [    0.000000]   #4 [00016b6000 - 000326ea00]          RAMDISK
> > ==>
> > > > > > > [00016b6000 - 000326ea00]
> > > > > > > > [    0.000000]   #5 [000326f000 - 0003974000]   XEN START INFO
> > ==>
> > > > > > > [000326f000 - 0003974000]
> > > > > > > > [    0.000000]   #6 [0001696000 - 000169614b]              BRK
> > ==>
> > > > > > > [0001696000 - 000169614b]
> > > > > > > > [    0.000000]   #7 [0000100000 - 000067c000]          PGTABLE
> > ==>
> > > > > > > [0000100000 - 000067c000]
> > > > > > > > [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
> > > > > > > > [    0.000000] Zone PFN ranges:
> > > > > > > > [    0.000000]   DMA      0x00000010 -> 0x00001000
> > > > > > > > [    0.000000]   DMA32    0x00001000 -> 0x00100000
> > > > > > > > [    0.000000]   Normal   0x00100000 -> 0x00100000
> > > > > > > > [    0.000000] Movable zone start PFN for each node
> > > > > > > > [    0.000000] early_node_map[2] active PFN ranges
> > > > > > > > [    0.000000]     0: 0x00000010 -> 0x0000009e
> > > > > > > > [    0.000000]     0: 0x00000100 -> 0x000b3780
> > > > > > > > [    0.000000] On node 0 totalpages: 734990
> > > > > > > > [    0.000000]   DMA zone: 56 pages used for memmap
> > > > > > > > [    0.000000]   DMA zone: 1407 pages reserved
> > > > > > > > [    0.000000]   DMA zone: 2519 pages, LIFO batch:0
> > > > > > > > [    0.000000]   DMA32 zone: 9995 pages used for memmap
> > > > > > > > [    0.000000]   DMA32 zone: 721013 pages, LIFO batch:31
> > > > > > > > [    0.000000] ACPI: PM-Timer IO Port: 0x808
> > > > > > > > [    0.000000] ACPI: Local APIC address 0xfee00000
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
> > enabled)
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04]
> > enabled)
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01]
> > enabled)
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05]
> > enabled)
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84]
> > disabled)
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85]
> > disabled)
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86]
> > disabled)
> > > > > > > > [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87]
> > disabled)
> > > > > > > > [    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000]
> > > > > gsi_base[0])
> > > > > > > > [    0.000000] IOAPIC[0]: apic_id 6, version 0, address
> > > > 0xfec00000,
> > > > > GSI
> > > > > > > 0-0
> > > > > > > > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
> > dfl
> > > > > dfl)
> > > > > > > > [    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
> > > > > > > > [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
> > > > high
> > > > > > > level)
> > > > > > > > [    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
> > > > > > > > [    0.000000] Using ACPI (MADT) for SMP configuration
> > information
> > > > > > > > [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> > > > > > > > [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> > > > > > > > [    0.000000] nr_irqs_gsi: 256
> > > > > > > > [    0.000000] PM: Registered nosave memory: 000000000009e000
> > -
> > > > > > > 000000000009f000
> > > > > > > > [    0.000000] PM: Registered nosave memory: 000000000009f000
> > -
> > > > > > > 0000000000100000
> > > > > > > > [    0.000000] Allocating PCI resources starting at c0000000
> > (gap:
> > > > > > > c0000000:3ec00000)
> > > > > > > > [    0.000000] Booting paravirtualized kernel on Xen
> > > > > > > > [    0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
> > > > > > > > [    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4
> > > > > > > nr_node_ids:1
> > > > > > > > [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff8800039cb000
> > > > > s90328
> > > > > > > r8192 d24360 u122880
> > > > > > > > [    0.000000] pcpu-alloc: s90328 r8192 d24360 u122880
> > > > alloc=30*4096
> > > > > > > > [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
> > > > > > > > [    1.623309] trying to map vcpu_info 0 at ffff8800039d6020,
> > mfn
> > > > > > > 1339d6, offset 32
> > > > > > > > [    1.623312] cpu 0 using vcpu_info at ffff8800039d6020
> > > > > > > > [    1.623314] trying to map vcpu_info 1 at ffff8800039f4020,
> > mfn
> > > > > > > 1339f4, offset 32
> > > > > > > > [    1.623316] cpu 1 using vcpu_info at ffff8800039f4020
> > > > > > > > [    1.623318] trying to map vcpu_info 2 at ffff880003a12020,
> > mfn
> > > > > > > 133a12, offset 32
> > > > > > > > [    1.623320] cpu 2 using vcpu_info at ffff880003a12020
> > > > > > > > [    1.623321] trying to map vcpu_info 3 at ffff880003a30020,
> > mfn
> > > > > > > 133a30, offset 32
> > > > > > > > [    1.623323] cpu 3 using vcpu_info at ffff880003a30020
> > > > > > > > [    1.623324] Xen: using vcpu_info placement
> > > > > > > > [    1.623329] Built 1 zonelists in Node order, mobility
> > grouping
> > > > > on. 
> > > > > > > Total pages: 723532
> > > > > > > > [    1.623331] Policy zone: DMA32
> > > > > > > > [    1.623334] Kernel command line: placeholder
> > > > > > > root=UUID=a7fcc19f-454f-4ec2-a591-e401d4c792c1 ro quiet
> > > > > > > xen-pciback.hide=(0000:00:1a.0)(0000:00:02.0)(0000:00:1b.0)
> > > > > > > > [    1.623358] PID hash table entries: 4096 (order: 3, 32768
> > > > bytes)
> > > > > > > > [    1.623620] Initializing CPU#0
> > > > > > > > [    1.631557] DMA: Placing 64MB software IO TLB between
> > > > > > > ffff8800065ed000 - ffff88000a5ed000
> > > > > > > > [    1.631561] DMA: software IO TLB at phys 0x65ed000 -
> > 0xa5ed000
> > > > > > > > [    1.631563] xen_swiotlb_fixup: buf=ffff8800065ed000
> > > > size=67108864
> > > > > > > > [    1.648347] xen_swiotlb_fixup: buf=ffff88000a64d000
> > size=32768
> > > > > > > > [    1.658726] Memory: 2783840k/2940416k available (3146k
> > kernel
> > > > > code,
> > > > > > > 456k absent, 156120k reserved, 1901k data, 600k init)
> > > > > > > > [    1.658760] SLUB: Genslabs=14, HWalign=64, Order=0-3,
> > > > > MinObjects=0,
> > > > > > > CPUs=4, Nodes=1
> > > > > > > > [    1.658780] Hierarchical RCU implementation.
> > > > > > > > [    1.658785] NR_IRQS:4352 nr_irqs:1280
> > > > > > > > [    1.658844] xen: --> irq=0
> > > > > > > > [    1.658849] xen: --> irq=1
> > > > > > > > [    1.658852] xen: --> irq=2
> > > > > > > > [    1.658855] xen: --> irq=3
> > > > > > > > [    1.658858] xen: --> irq=4
> > > > > > > > [    1.658861] xen: --> irq=5
> > > > > > > > [    1.658864] xen: --> irq=6
> > > > > > > > [    1.658867] xen: --> irq=7
> > > > > > > > [    1.658870] xen: --> irq=8
> > > > > > > > [    1.658873] xen: --> irq=9
> > > > > > > > [    1.658876] xen: --> irq=10
> > > > > > > > [    1.658879] xen: --> irq=11
> > > > > > > > [    1.658882] xen: --> irq=12
> > > > > > > > [    1.658885] xen: --> irq=13
> > > > > > > > [    1.658887] xen: --> irq=14
> > > > > > > > [    1.658890] xen: --> irq=15
> > > > > > > > [    1.658904] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
> > dfl
> > > > > dfl)
> > > > > > > > [    1.658906] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
> > > > high
> > > > > > > level)
> > > > > > > > [    1.658908] xen: sci override: source_irq=9 global_irq=9
> > > > > trigger=c
> > > > > > > polarity=1
> > > > > > > > [    1.658909] xen: registering gsi 9 triggering 0 polarity 0
> > > > > > > > [    1.658911] xen_allocate_pirq: returning irq 9 for gsi 9
> > > > > > > > [    1.658912] xen: --> irq=9
> > > > > > > > [    1.658919] xen: acpi sci 9
> > > > > > > > [    1.661499] Console: colour VGA+ 80x25
> > > > > > > > [    1.661563] console [tty0] enabled
> > > > > > > > [    1.661585] Xen: using vcpuop timer interface
> > > > > > > > [    1.661588] installing Xen timer for CPU 0
> > > > > > > > [    1.661595]   alloc irq_desc for 1279 on node -1
> > > > > > > > [    1.661596]   alloc kstat_irqs on node -1
> > > > > > > > [    1.661611] Detected 3192.054 MHz processor.
> > > > > > > > [    1.661616] Calibrating delay loop (skipped), value
> > calculated
> > > > > using
> > > > > > > timer frequency.. 6384.10 BogoMIPS (lpj=12768216)
> > > > > > > > [    1.661629] Security Framework initialized
> > > > > > > > [    1.661633] SELinux:  Disabled at boot.
> > > > > > > > [    1.662144] Dentry cache hash table entries: 524288 (order:
> > 10,
> > > > > > > 4194304 bytes)
> > > > > > > > [    1.663061] Inode-cache hash table entries: 262144 (order:
> > 9,
> > > > > 2097152
> > > > > > > bytes)
> > > > > > > > [    1.663412] Mount-cache hash table entries: 256
> > > > > > > > [    1.663519] Initializing cgroup subsys ns
> > > > > > > > [    1.663522] Initializing cgroup subsys cpuacct
> > > > > > > > [    1.663526] Initializing cgroup subsys devices
> > > > > > > > [    1.663528] Initializing cgroup subsys freezer
> > > > > > > > [    1.663530] Initializing cgroup subsys net_cls
> > > > > > > > [    1.663560] CPU: L1 I cache: 32K, L1 D cache: 32K
> > > > > > > > [    1.663562] CPU: L2 cache: 256K
> > > > > > > > [    1.663563] CPU: L3 cache: 4096K
> > > > > > > > [    1.663566] CPU 0/0x0 -> Node 0
> > > > > > > > [    1.663568] CPU: Unsupported number of siblings 16
> > > > > > > > [    1.663572] mce: CPU supports 9 MCE banks
> > > > > > > > [    1.663592] Performance Events: unsupported p6 CPU model 37
> > no
> > > > > PMU
> > > > > > > driver, software events only.
> > > > > > > > [    1.663604] SMP alternatives: switching to UP code
> > > > > > > > [    1.681616] ACPI: Core revision 20090903
> > > > > > > > [    1.712052]   alloc irq_desc for 1278 on node -1
> > > > > > > > [    1.712054]   alloc kstat_irqs on node -1
> > > > > > > > [    1.712062]   alloc irq_desc for 1277 on node -1
> > > > > > > > [    1.712063]   alloc kstat_irqs on node -1
> > > > > > > > [    1.712067]   alloc irq_desc for 1276 on node -1
> > > > > > > > [    1.712068]   alloc kstat_irqs on node -1
> > > > > > > > [    1.712071]   alloc irq_desc for 1275 on node -1
> > > > > > > > [    1.712073]   alloc kstat_irqs on node -1
> > > > > > > > [    1.712194] installing Xen timer for CPU 1
> > > > > > > > [    1.712197]   alloc irq_desc for 1274 on node -1
> > > > > > > > [    1.712198]   alloc kstat_irqs on node -1
> > > > > > > > [    1.712220] SMP alternatives: switching to SMP code
> > > > > > > > [    1.729618]   alloc irq_desc for 1273 on node -1
> > > > > > > > [    1.729620]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729630]   alloc irq_desc for 1272 on node -1
> > > > > > > > [    1.729631]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729635]   alloc irq_desc for 1271 on node -1
> > > > > > > > [    1.729636]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729639]   alloc irq_desc for 1270 on node -1
> > > > > > > > [    1.729641]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729652] Initializing CPU#1
> > > > > > > > [    1.729681] CPU: L1 I cache: 32K, L1 D cache: 32K
> > > > > > > > [    1.729683] CPU: L2 cache: 256K
> > > > > > > > [    1.729684] CPU: L3 cache: 4096K
> > > > > > > > [    1.729686] CPU 1/0x0 -> Node 0
> > > > > > > > [    1.729688] CPU: Unsupported number of siblings 16
> > > > > > > > [    1.729762] installing Xen timer for CPU 2
> > > > > > > > [    1.729765]   alloc irq_desc for 1269 on node -1
> > > > > > > > [    1.729767]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729785]   alloc irq_desc for 1268 on node -1
> > > > > > > > [    1.729787]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729791]   alloc irq_desc for 1267 on node -1
> > > > > > > > [    1.729792]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729796]   alloc irq_desc for 1266 on node -1
> > > > > > > > [    1.729797]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729802]   alloc irq_desc for 1265 on node -1
> > > > > > > > [    1.729803]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729812] Initializing CPU#2
> > > > > > > > [    1.729843] CPU: L1 I cache: 32K, L1 D cache: 32K
> > > > > > > > [    1.729845] CPU: L2 cache: 256K
> > > > > > > > [    1.729846] CPU: L3 cache: 4096K
> > > > > > > > [    1.729850] CPU 2/0x0 -> Node 0
> > > > > > > > [    1.729852] CPU: Unsupported number of siblings 16
> > > > > > > > [    1.729928] installing Xen timer for CPU 3
> > > > > > > > [    1.729931]   alloc irq_desc for 1264 on node -1
> > > > > > > > [    1.729933]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729949]   alloc irq_desc for 1263 on node -1
> > > > > > > > [    1.729951]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729954]   alloc irq_desc for 1262 on node -1
> > > > > > > > [    1.729956]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729959]   alloc irq_desc for 1261 on node -1
> > > > > > > > [    1.729960]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729963]   alloc irq_desc for 1260 on node -1
> > > > > > > > [    1.729965]   alloc kstat_irqs on node -1
> > > > > > > > [    1.729972] Initializing CPU#3
> > > > > > > > [    1.729996] CPU: L1 I cache: 32K, L1 D cache: 32K
> > > > > > > > [    1.729998] CPU: L2 cache: 256K
> > > > > > > > [    1.729999] CPU: L3 cache: 4096K
> > > > > > > > [    1.730001] CPU 3/0x0 -> Node 0
> > > > > > > > [    1.730002] CPU: Unsupported number of siblings 16
> > > > > > > > [    1.730029] Brought up 4 CPUs
> > > > > > > > [    1.730046] CPU0 attaching sched-domain:
> > > > > > > > [    1.730049]  domain 0: span 0-3 level CPU
> > > > > > > > [    1.730051]   groups: 0 1 2 3
> > > > > > > > [    1.730057] CPU1 attaching sched-domain:
> > > > > > > > [    1.730058]  domain 0: span 0-3 level CPU
> > > > > > > > [    1.730060]   groups: 1 2 3 0
> > > > > > > > [    1.730065] CPU2 attaching sched-domain:
> > > > > > > > [    1.730067]  domain 0: span 0-3 level CPU
> > > > > > > > [    1.730068]   groups: 2 3 0 1
> > > > > > > > [    1.730073] CPU3 attaching sched-domain:
> > > > > > > > [    1.730075]  domain 0: span 0-3 level CPU
> > > > > > > > [    1.730076]   groups: 3 0 1 2
> > > > > > > > [    1.730258] devtmpfs: initialized
> > > > > > > > [    1.732635] Grant table initialized
> > > > > > > > [    1.732637] regulator: core version 0.5
> > > > > > > > [    1.732675] NET: Registered protocol family 16
> > > > > > > > [    1.732715]   alloc irq_desc for 1259 on node -1
> > > > > > > > [    1.732717]   alloc kstat_irqs on node -1
> > > > > > > > [    1.732805] ACPI: bus type pci registered
> > > > > > > > [    1.732818] sync cpu 0 get result 1 max_id 3
> > > > > > > > [    1.732824] sync cpu 1 get result 1 max_id 3
> > > > > > > > [    1.732830] sync cpu 2 get result 1 max_id 3
> > > > > > > > [    1.732836] sync cpu 3 get result 1 max_id 3
> > > > > > > > [    1.732840]   alloc irq_desc for 1258 on node -1
> > > > > > > > [    1.732841]   alloc kstat_irqs on node -1
> > > > > > > > [    1.732901] PCI: MCFG configuration 0: base e0000000
> > segment 0
> > > > > buses
> > > > > > > 0 - 255
> > > > > > > > [    1.732903] PCI: Not using MMCONFIG.
> > > > > > > > [    1.732904] PCI: Using configuration type 1 for base access
> > > > > > > > [    1.733327] bio: create slab <bio-0> at 0
> > > > > > > > [    1.734439] ERROR: Unable to locate IOAPIC for GSI 9
> > > > > > > > [    1.734488] ACPI: EC: Look up EC in DSDT
> > > > > > > > [    1.737827] ACPI: Executed 1 blocks of module-level
> > executable
> > > > > AML
> > > > > > > code
> > > > > > > > [    1.745426] ACPI: Interpreter enabled
> > > > > > > > [    1.745428] ACPI: (supports S0 S1 S4 S5)
> > > > > > > > [    1.745450] ACPI: Using IOAPIC for interrupt routing
> > > > > > > > [    1.745500] PCI: MCFG configuration 0: base e0000000
> > segment 0
> > > > > buses
> > > > > > > 0 - 255
> > > > > > > > [    1.748597] PCI: MCFG area at e0000000 reserved in ACPI
> > > > > motherboard
> > > > > > > resources
> > > > > > > > [    1.783415] PCI: Using MMCONFIG at e0000000 - efffffff
> > > > > > > > [    1.793289] ACPI: No dock devices found.
> > > > > > > > [    1.793626] ACPI: PCI Root Bridge [PCI0] (0000:00)
> > > > > > > > [    1.793757] pci 0000:00:02.0: reg 10 64bit mmio:
> > > > > > > [0xfb800000-0xfbbfffff]
> > > > > > > > [    1.793767] pci 0000:00:02.0: reg 18 64bit mmio pref:
> > > > > > > [0xd0000000-0xdfffffff]
> > > > > > > > [    1.793773] pci 0000:00:02.0: reg 20 io port:
> > [0xcc00-0xcc07]
> > > > > > > > [    1.793900] pci 0000:00:16.0: reg 10 64bit mmio:
> > > > > > > [0xfbdfa000-0xfbdfa00f]
> > > > > > > > [    1.793973] pci 0000:00:16.0: PME# supported from D0 D3hot
> > > > D3cold
> > > > > > > > [    1.793978] pci 0000:00:16.0: PME# disabled
> > > > > > > > [    1.794056] pci 0000:00:1a.0: reg 10 32bit mmio:
> > > > > > > [0xfbdf8000-0xfbdf83ff]
> > > > > > > > [    1.794132] pci 0000:00:1a.0: PME# supported from D0 D3hot
> > > > D3cold
> > > > > > > > [    1.794137] pci 0000:00:1a.0: PME# disabled
> > > > > > > > [    1.794192] pci 0000:00:1b.0: reg 10 64bit mmio:
> > > > > > > [0xfbdf4000-0xfbdf7fff]
> > > > > > > > [    1.794250] pci 0000:00:1b.0: PME# supported from D0 D3hot
> > > > D3cold
> > > > > > > > [    1.794254] pci 0000:00:1b.0: PME# disabled
> > > > > > > > [    1.794340] pci 0000:00:1c.0: PME# supported from D0 D3hot
> > > > D3cold
> > > > > > > > [    1.794344] pci 0000:00:1c.0: PME# disabled
> > > > > > > > [    1.794424] pci 0000:00:1d.0: reg 10 32bit mmio:
> > > > > > > [0xfbdf2000-0xfbdf23ff]
> > > > > > > > [    1.794500] pci 0000:00:1d.0: PME# supported from D0 D3hot
> > > > D3cold
> > > > > > > > [    1.794505] pci 0000:00:1d.0: PME# disabled
> > > > > > > > [    1.794763] pci 0000:00:1f.2: reg 10 io port:
> > [0xc880-0xc887]
> > > > > > > > [    1.794771] pci 0000:00:1f.2: reg 14 io port:
> > [0xc800-0xc803]
> > > > > > > > [    1.794778] pci 0000:00:1f.2: reg 18 io port:
> > [0xc480-0xc487]
> > > > > > > > [    1.794785] pci 0000:00:1f.2: reg 1c io port:
> > [0xc400-0xc403]
> > > > > > > > [    1.794792] pci 0000:00:1f.2: reg 20 io port:
> > [0xc080-0xc09f]
> > > > > > > > [    1.794799] pci 0000:00:1f.2: reg 24 32bit mmio:
> > > > > > > [0xfbdf0000-0xfbdf07ff]
> > > > > > > > [    1.794845] pci 0000:00:1f.2: PME# supported from D3hot
> > > > > > > > [    1.794850] pci 0000:00:1f.2: PME# disabled
> > > > > > > > [    1.794890] pci 0000:00:1f.3: reg 10 64bit mmio:
> > > > > > > [0xfbdee000-0xfbdee0ff]
> > > > > > > > [    1.794909] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
> > > > > > > > [    1.794993] pci 0000:01:00.0: reg 10 io port:
> > [0xd800-0xd8ff]
> > > > > > > > [    1.795018] pci 0000:01:00.0: reg 18 64bit mmio pref:
> > > > > > > [0xfafff000-0xfaffffff]
> > > > > > > > [    1.795037] pci 0000:01:00.0: reg 20 64bit mmio pref:
> > > > > > > [0xfaff8000-0xfaffbfff]
> > > > > > > > [    1.795047] pci 0000:01:00.0: reg 30 32bit mmio pref:
> > > > > > > [0xfbee0000-0xfbefffff]
> > > > > > > > [    1.795099] pci 0000:01:00.0: supports D1 D2
> > > > > > > > [    1.795100] pci 0000:01:00.0: PME# supported from D0 D1 D2
> > > > D3hot
> > > > > > > D3cold
> > > > > > > > [    1.795106] pci 0000:01:00.0: PME# disabled
> > > > > > > > [    1.802874] pci 0000:00:1c.0: bridge io port:
> > [0xd000-0xdfff]
> > > > > > > > [    1.802879] pci 0000:00:1c.0: bridge 32bit mmio:
> > > > > > > [0xfbe00000-0xfbefffff]
> > > > > > > > [    1.802886] pci 0000:00:1c.0: bridge 64bit mmio pref:
> > > > > > > [0xfaf00000-0xfaffffff]
> > > > > > > > [    1.802948] pci 0000:00:1e.0: transparent bridge
> > > > > > > > [    1.802977] ACPI: PCI Interrupt Routing Table
> > [\_SB_.PCI0._PRT]
> > > > > > > > [    1.803245] ACPI: PCI Interrupt Routing Table
> > > > > [\_SB_.PCI0.BR1E._PRT]
> > > > > > > > [    1.803340] ACPI: PCI Interrupt Routing Table
> > > > > [\_SB_.PCI0.BR20._PRT]
> > > > > > > > [    1.808166] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7
> > 10
> > > > *11
> > > > > 12
> > > > > > > 14 15)
> > > > > > > > [    1.808275] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
> > > > > > > > [    1.808377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7
> > *10
> > > > 11
> > > > > 12
> > > > > > > 14 15)
> > > > > > > > [    1.808484] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7
> > 10 11
> > > > > 12
> > > > > > > *14 15)
> > > > > > > > [    1.808591] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7
> > 10 11
> > > > > 12 14
> > > > > > > 15) *0, disabled.
> > > > > > > > [    1.808699] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7
> > 10 11
> > > > > 12 14
> > > > > > > 15) *0, disabled.
> > > > > > > > [    1.808807] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7
> > 10 11
> > > > > 12 14
> > > > > > > *15)
> > > > > > > > [    1.808914] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7
> > 10
> > > > 11
> > > > > 12)
> > > > > > > > [    1.808979] xen_balloon: Initialising balloon driver with
> > page
> > > > > order
> > > > > > > 0.
> > > > > > > > [    1.809022] vgaarb: device added:
> > > > > > > PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> > > > > > > > [    1.809028] vgaarb: loaded
> > > > > > > > [    1.809084] PCI: Using ACPI for IRQ routing
> > > > > > > > [    1.809213] Switching to clocksource xen
> > > > > > > > [    1.810285] pnp: PnP ACPI init
> > > > > > > > [    1.810294] ACPI: bus type pnp registered
> > > > > > > > [    1.810612] xen: registering gsi 8 triggering 1 polarity 0
> > > > > > > > [    1.810614] xen_allocate_pirq: returning irq 8 for gsi 8
> > > > > > > > [    1.810616] xen: --> irq=8
> > > > > > > > [    1.810671] xen: registering gsi 13 triggering 1 polarity 0
> > > > > > > > [    1.810673] xen_allocate_pirq: returning irq 13 for gsi 13
> > > > > > > > [    1.810674] xen: --> irq=13
> > > > > > > > [    1.812994] pnp: PnP ACPI: found 12 devices
> > > > > > > > [    1.812996] ACPI: ACPI bus type pnp unregistered
> > > > > > > > [    1.813003] system 00:01: iomem range 0xfc000000-0xfcffffff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813006] system 00:01: iomem range 0xfd000000-0xfdffffff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813008] system 00:01: iomem range 0xfe000000-0xfebfffff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813010] system 00:01: iomem range 0xfed14000-0xfed19fff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813015] system 00:06: ioport range 0xa00-0xadf has been
> > > > > reserved
> > > > > > > > [    1.813017] system 00:06: ioport range 0xae0-0xaef has been
> > > > > reserved
> > > > > > > > [    1.813021] system 00:07: ioport range 0x4d0-0x4d1 has been
> > > > > reserved
> > > > > > > > [    1.813024] system 00:07: ioport range 0x800-0x87f has been
> > > > > reserved
> > > > > > > > [    1.813026] system 00:07: ioport range 0x500-0x57f has been
> > > > > reserved
> > > > > > > > [    1.813028] system 00:07: iomem range 0xfed1c000-0xfed1ffff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813030] system 00:07: iomem range 0xfed20000-0xfed3ffff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813033] system 00:07: iomem range 0xfed45000-0xfed89fff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813037] system 00:07: iomem range 0xfed20000-0xfed3ffff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813039] system 00:07: iomem range 0xfed40000-0xfed8ffff
> > > > could
> > > > > not
> > > > > > > be reserved
> > > > > > > > [    1.813044] system 00:09: iomem range 0xfec00000-0xfec00fff
> > > > could
> > > > > not
> > > > > > > be reserved
> > > > > > > > [    1.813046] system 00:09: iomem range 0xfee00000-0xfee00fff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813050] system 00:0a: iomem range 0xe0000000-0xefffffff
> > has
> > > > > been
> > > > > > > reserved
> > > > > > > > [    1.813054] system 00:0b: iomem range 0x0-0x9ffff could not
> > be
> > > > > > > reserved
> > > > > > > > [    1.813057] system 00:0b: iomem range 0xc0000-0xcffff could
> > not
> > > > > be
> > > > > > > reserved
> > > > > > > > [    1.813059] system 00:0b: iomem range 0xe0000-0xfffff could
> > not
> > > > > be
> > > > > > > reserved
> > > > > > > > [    1.813061] system 00:0b: iomem range 0x100000-0xb3ffffff
> > could
> > > > > not
> > > > > > > be reserved
> > > > > > > > [    1.813064] system 00:0b: iomem range 0xfed90000-0xffffffff
> > > > could
> > > > > not
> > > > > > > be reserved
> > > > > > > > [    1.813080] pciback 0000:00:02.0: seizing device
> > > > > > > > [    1.813088] pciback 0000:00:1a.0: seizing device
> > > > > > > > [    1.813092] pciback 0000:00:1b.0: seizing device
> > > > > > > > [    1.816441] PM-Timer failed consistency check  (0x0xffffff)
> > -
> > > > > > > aborting.
> > > > > > > > [    1.816470] pci 0000:00:1c.0: PCI bridge, secondary bus
> > 0000:01
> > > > > > > > [    1.816473] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
> > > > > > > > [    1.816479] pci 0000:00:1c.0:   MEM window:
> > > > 0xfbe00000-0xfbefffff
> > > > > > > > [    1.816483] pci 0000:00:1c.0:   PREFETCH window:
> > > > > > > 0x000000faf00000-0x000000faffffff
> > > > > > > > [    1.816491] pci 0000:00:1e.0: PCI bridge, secondary bus
> > 0000:03
> > > > > > > > [    1.816492] pci 0000:00:1e.0:   IO window: disabled
> > > > > > > > [    1.816498] pci 0000:00:1e.0:   MEM window: disabled
> > > > > > > > [    1.816502] pci 0000:00:1e.0:   PREFETCH window: disabled
> > > > > > > > [    1.816518] xen: registering gsi 17 triggering 0 polarity 1
> > > > > > > > [    1.816524]   alloc irq_desc for 17 on node -1
> > > > > > > > [    1.816526]   alloc kstat_irqs on node -1
> > > > > > > > [    1.816529] xen: --> irq=17
> > > > > > > > [    1.816533] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level,
> > low)
> > > > ->
> > > > > IRQ
> > > > > > > 17
> > > > > > > > [    1.816538] pci 0000:00:1c.0: setting latency timer to 64
> > > > > > > > [    1.816546] pci 0000:00:1e.0: setting latency timer to 64
> > > > > > > > [    1.816550] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
> > > > > > > > [    1.816552] pci_bus 0000:00: resource 1 mem:
> > > > > > > [0x000000-0xffffffffffffffff]
> > > > > > > > [    1.816554] pci_bus 0000:01: resource 0 io: 
> > [0xd000-0xdfff]
> > > > > > > > [    1.816555] pci_bus 0000:01: resource 1 mem:
> > > > > [0xfbe00000-0xfbefffff]
> > > > > > > > [    1.816557] pci_bus 0000:01: resource 2 pref mem
> > > > > > > [0xfaf00000-0xfaffffff]
> > > > > > > > [    1.816559] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
> > > > > > > > [    1.816561] pci_bus 0000:03: resource 4 mem:
> > > > > > > [0x000000-0xffffffffffffffff]
> > > > > > > > [    1.816580] NET: Registered protocol family 2
> > > > > > > > [    1.816753] IP route cache hash table entries: 131072
> > (order:
> > > > 8,
> > > > > > > 1048576 bytes)
> > > > > > > > [    1.818005] TCP established hash table entries: 524288
> > (order:
> > > > > 11,
> > > > > > > 8388608 bytes)
> > > > > > > > [    1.820092] TCP bind hash table entries: 65536 (order: 8,
> > > > 1048576
> > > > > > > bytes)
> > > > > > > > [    1.820329] TCP: Hash tables configured (established 524288
> > > > bind
> > > > > > > 65536)
> > > > > > > > [    1.820331] TCP reno registered
> > > > > > > > [    1.820418] NET: Registered protocol family 1
> > > > > > > > [    1.820440] pciback 0000:00:02.0: Boot video device
> > > > > > > > [    1.820539] Unpacking initramfs...
> > > > > > > > [    1.839777] Freeing initrd memory: 28386k freed
> > > > > > > > [    1.844995] PCI-DMA: Using software bounce buffering for IO
> > > > > (SWIOTLB)
> > > > > > > > [    1.845000] DMA: Placing 64MB software IO TLB between
> > > > > > > ffff8800065ed000 - ffff88000a5ed000
> > > > > > > > [    1.845002] DMA: software IO TLB at phys 0x65ed000 -
> > 0xa5ed000
> > > > > > > > [    1.845438] audit: initializing netlink socket (disabled)
> > > > > > > > [    1.845449] type=2000 audit(1293384569.789:1): initialized
> > > > > > > > [    1.848755] HugeTLB registered 2 MB page size,
> > pre-allocated 0
> > > > > pages
> > > > > > > > [    1.849787] VFS: Disk quotas dquot_6.5.2
> > > > > > > > [    1.849825] Dquot-cache hash table entries: 512 (order 0,
> > 4096
> > > > > bytes)
> > > > > > > > [    1.849884] msgmni has been set to 5492
> > > > > > > > [    1.850120] alg: No test for stdrng (krng)
> > > > > > > > [    1.850160] Block layer SCSI generic (bsg) driver version
> > 0.4
> > > > > loaded
> > > > > > > (major 253)
> > > > > > > > [    1.850163] io scheduler noop registered
> > > > > > > > [    1.850164] io scheduler anticipatory registered
> > > > > > > > [    1.850166] io scheduler deadline registered
> > > > > > > > [    1.850186] io scheduler cfq registered (default)
> > > > > > > > [    1.850300]   alloc irq_desc for 1257 on node -1
> > > > > > > > [    1.850302]   alloc kstat_irqs on node -1
> > > > > > > > [    1.850335] pcieport 0000:00:1c.0: setting latency timer to
> > 64
> > > > > > > > [    1.850527] xen: registering gsi 22 triggering 0 polarity 1
> > > > > > > > [    1.850533]   alloc irq_desc for 22 on node -1
> > > > > > > > [    1.850534]   alloc kstat_irqs on node -1
> > > > > > > > [    1.850537] xen: --> irq=22
> > > > > > > > [    1.850543] pciback 0000:00:1b.0: PCI INT A -> GSI 22
> > (level,
> > > > > low) ->
> > > > > > > IRQ 22
> > > > > > > > [    1.850549] pciback 0000:00:1b.0: PCI INT A disabled
> > > > > > > > [    1.850587] xen: registering gsi 16 triggering 0 polarity 1
> > > > > > > > [    1.850590]   alloc irq_desc for 16 on node -1
> > > > > > > > [    1.850591]   alloc kstat_irqs on node -1
> > > > > > > > [    1.850593] xen: --> irq=16
> > > > > > > > [    1.850597] pciback 0000:00:1a.0: PCI INT A -> GSI 16
> > (level,
> > > > > low) ->
> > > > > > > IRQ 16
> > > > > > > > [    1.850602] pciback 0000:00:1a.0: PCI INT A disabled
> > > > > > > > [    1.850629] xen: registering gsi 16 triggering 0 polarity 1
> > > > > > > > [    1.850631] xen_allocate_pirq: returning irq 16 for gsi 16
> > > > > > > > [    1.850632] xen: --> irq=16
> > > > > > > > [    1.850633] Already setup the GSI :16
> > > > > > > > [    1.850635] pciback 0000:00:02.0: PCI INT A -> GSI 16
> > (level,
> > > > > low) ->
> > > > > > > IRQ 16
> > > > > > > > [    1.850639] pciback 0000:00:02.0: PCI INT A disabled
> > > > > > > > [    1.853800] registering netback
> > > > > > > > [    1.853893]   alloc irq_desc for 1256 on node -1
> > > > > > > > [    1.853895]   alloc kstat_irqs on node -1
> > > > > > > > [    1.854772]   alloc irq_desc for 1255 on node -1
> > > > > > > > [    1.854773]   alloc kstat_irqs on node -1
> > > > > > > > [    1.855066] hpet_acpi_add: no address or irqs in _CRS
> > > > > > > > [    1.855088] Linux agpgart interface v0.103
> > > > > > > > [    1.855107] agpgart-intel 0000:00:00.0: Intel IGDNG/D
> > Chipset
> > > > > > > > [    1.856095] agpgart-intel 0000:00:00.0: detected 131068K
> > stolen
> > > > > > > memory
> > > > > > > > [    1.960454] agpgart-intel 0000:00:00.0: AGP aperture is
> > 256M @
> > > > > > > 0xd0000000
> > > > > > > > [    1.960487] Serial: 8250/16550 driver, 4 ports, IRQ sharing
> > > > > enabled
> > > > > > > > [    1.960744] input: Macintosh mouse button emulation as
> > > > > > > /devices/virtual/input/input0
> > > > > > > > [    1.960793] PNP: No PS/2 controller found. Probing ports
> > > > > directly.
> > > > > > > > [    1.961168] serio: i8042 KBD port at 0x60,0x64 irq 1
> > > > > > > > [    1.961175] serio: i8042 AUX port at 0x60,0x64 irq 12
> > > > > > > > [    1.961228] mice: PS/2 mouse device common for all mice
> > > > > > > > [    1.961259] rtc_cmos 00:03: RTC can wake from S4
> > > > > > > > [    1.961292] rtc_cmos 00:03: rtc core: registered rtc_cmos
> > as
> > > > rtc0
> > > > > > > > [    1.961338] rtc0: alarms up to one month, y3k, 114 bytes
> > nvram
> > > > > > > > [    1.961347] cpuidle: using governor ladder
> > > > > > > > [    1.961348] cpuidle: using governor menu
> > > > > > > > [    1.961353] No iBFT detected.
> > > > > > > > [    1.961549] TCP cubic registered
> > > > > > > > [    1.961626] NET: Registered protocol family 10
> > > > > > > > [    1.961946] lo: Disabled Privacy Extensions
> > > > > > > > [    1.962106] Mobile IPv6
> > > > > > > > [    1.962109] NET: Registered protocol family 17
> > > > > > > > [    1.962166] PM: Resume from disk failed.
> > > > > > > > [    1.962175] registered taskstats version 1
> > > > > > > > [    1.962519] rtc_cmos 00:03: setting system clock to
> > 2010-12-26
> > > > > > > 17:29:29 UTC (1293384569)
> > > > > > > > [    1.962544] Initalizing network drop monitor service
> > > > > > > > [    1.962600] Freeing unused kernel memory: 600k freed
> > > > > > > > [    1.962679] Write protecting the kernel read-only data:
> > 4324k
> > > > > > > > [    2.028117] udev[86]: starting version 164
> > > > > > > > [    2.105339] SCSI subsystem initialized
> > > > > > > > [    2.119328] libata version 3.00 loaded.
> > > > > > > > [    2.130403] usbcore: registered new interface driver usbfs
> > > > > > > > [    2.130426] usbcore: registered new interface driver hub
> > > > > > > > [    2.130460] usbcore: registered new device driver usb
> > > > > > > > [    2.131625] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> > > > > > > > [    2.131654] xen: registering gsi 16 triggering 0 polarity 1
> > > > > > > > [    2.131657] xen_allocate_pirq: returning irq 16 for gsi 16
> > > > > > > > [    2.131659] xen: --> irq=16
> > > > > > > > [    2.131663] Already setup the GSI :16
> > > > > > > > [    2.131667] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level,
> > > > low)
> > > > > ->
> > > > > > > IRQ 16
> > > > > > > > [    2.131715] r8169 0000:01:00.0: setting latency timer to 64
> > > > > > > > [    2.131768]   alloc irq_desc for 1254 on node -1
> > > > > > > > [    2.131769]   alloc kstat_irqs on node -1
> > > > > > > > [    2.132170] eth0: RTL8168d/8111d at 0xffffc90000672000,
> > > > > > > 40:61:86:5b:33:fe, XID 081000c0 IRQ 1254
> > > > > > > > [    2.134725] ahci 0000:00:1f.2: version 3.0
> > > > > > > > [    2.134743] xen: registering gsi 19 triggering 0 polarity 1
> > > > > > > > [    2.134751]   alloc irq_desc for 19 on node -1
> > > > > > > > [    2.134753]   alloc kstat_irqs on node -1
> > > > > > > > [    2.134757] xen: --> irq=19
> > > > > > > > [    2.134764] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level,
> > low)
> > > > > ->
> > > > > > > IRQ 19
> > > > > > > > [    2.134804]   alloc irq_desc for 1253 on node -1
> > > > > > > > [    2.134807]   alloc kstat_irqs on node -1
> > > > > > > > [    2.134872] ahci: SSS flag set, parallel bus scan disabled
> > > > > > > > [    2.135742] ehci_hcd: USB 2.0 'Enhanced' Host Controller
> > (EHCI)
> > > > > > > Driver
> > > > > > > > [    2.137559] r8169 0000:01:00.0: firmware: requesting
> > > > > rtl8168d-1.fw
> > > > > > > > [    2.140006] eth0: unable to apply firmware patch
> > > > > > > > [    2.150880] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6
> > ports
> > > > 3
> > > > > Gbps
> > > > > > > 0x3f impl SATA mode
> > > > > > > > [    2.150888] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag
> > pm
> > > > led
> > > > > clo
> > > > > > > pio slum part ems sxs apst 
> > > > > > > > [    2.150901] ahci 0000:00:1f.2: setting latency timer to 64
> > > > > > > > [    2.190923] scsi0 : ahci
> > > > > > > > [    2.191031] scsi1 : ahci
> > > > > > > > [    2.191092] scsi2 : ahci
> > > > > > > > [    2.191157] scsi3 : ahci
> > > > > > > > [    2.191222] scsi4 : ahci
> > > > > > > > [    2.191286] scsi5 : ahci
> > > > > > > > [    2.191484] ata1: SATA max UDMA/133 abar m2048@0xfbdf0000
> > port
> > > > > > > 0xfbdf0100 irq 1253
> > > > > > > > [    2.191487] ata2: SATA max UDMA/133 abar m2048@0xfbdf0000
> > port
> > > > > > > 0xfbdf0180 irq 1253
> > > > > > > > [    2.191489] ata3: SATA max UDMA/133 abar m2048@0xfbdf0000
> > port
> > > > > > > 0xfbdf0200 irq 1253
> > > > > > > > [    2.191492] ata4: SATA max UDMA/133 abar m2048@0xfbdf0000
> > port
> > > > > > > 0xfbdf0280 irq 1253
> > > > > > > > [    2.191494] ata5: SATA max UDMA/133 abar m2048@0xfbdf0000
> > port
> > > > > > > 0xfbdf0300 irq 1253
> > > > > > > > [    2.191496] ata6: SATA max UDMA/133 abar m2048@0xfbdf0000
> > port
> > > > > > > 0xfbdf0380 irq 1253
> > > > > > > > [    2.191544] xen: registering gsi 23 triggering 0 polarity 1
> > > > > > > > [    2.191552]   alloc irq_desc for 23 on node -1
> > > > > > > > [    2.191554]   alloc kstat_irqs on node -1
> > > > > > > > [    2.191558] xen: --> irq=23
> > > > > > > > [    2.191566] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23
> > (level,
> > > > > low)
> > > > > > > -> IRQ 23
> > > > > > > > [    2.191591] ehci_hcd 0000:00:1d.0: setting latency timer to
> > 64
> > > > > > > > [    2.191595] ehci_hcd 0000:00:1d.0: EHCI Host Controller
> > > > > > > > [    2.191621] ehci_hcd 0000:00:1d.0: new USB bus registered,
> > > > > assigned
> > > > > > > bus number 1
> > > > > > > > [    2.191669] ehci_hcd 0000:00:1d.0: debug port 2
> > > > > > > > [    2.195594] ehci_hcd 0000:00:1d.0: cache line size of 32 is
> > not
> > > > > > > supported
> > > > > > > > [    2.195612] ehci_hcd 0000:00:1d.0: irq 23, io mem
> > 0xfbdf2000
> > > > > > > > [    2.213345] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI
> > 1.00
> > > > > > > > [    2.213399] usb usb1: New USB device found, idVendor=1d6b,
> > > > > > > idProduct=0002
> > > > > > > > [    2.213402] usb usb1: New USB device strings: Mfr=3,
> > Product=2,
> > > > > > > SerialNumber=1
> > > > > > > > [    2.213403] usb usb1: Product: EHCI Host Controller
> > > > > > > > [    2.213405] usb usb1: Manufacturer: Linux
> > 2.6.32-5-xen-amd64
> > > > > ehci_hcd
> > > > > > > > [    2.213406] usb usb1: SerialNumber: 0000:00:1d.0
> > > > > > > > [    2.213495] usb usb1: configuration #1 chosen from 1 choice
> > > > > > > > [    2.213545] hub 1-0:1.0: USB hub found
> > > > > > > > [    2.213559] hub 1-0:1.0: 2 ports detected
> > > > > > > > [    2.509341] ata1: SATA link down (SStatus 0 SControl 300)
> > > > > > > > [    2.525354] usb 1-1: new high speed USB device using
> > ehci_hcd
> > > > and
> > > > > > > address 2
> > > > > > > > [    2.657723] usb 1-1: New USB device found, idVendor=8087,
> > > > > > > idProduct=0020
> > > > > > > > [    2.657729] usb 1-1: New USB device strings: Mfr=0,
> > Product=0,
> > > > > > > SerialNumber=0
> > > > > > > > [    2.657800] usb 1-1: configuration #1 chosen from 1 choice
> > > > > > > > [    2.657863] hub 1-1:1.0: USB hub found
> > > > > > > > [    2.657975] hub 1-1:1.0: 8 ports detected
> > > > > > > > [    2.845345] ata2: SATA link down (SStatus 0 SControl 300)
> > > > > > > > [    3.182840] ata3: SATA link up 3.0 Gbps (SStatus 123
> > SControl
> > > > > 300)
> > > > > > > > [    3.224211] ata3.00: ATA-8: WDC WD1600BEVT-11ZCT0,
> > 11.01A11,
> > > > max
> > > > > > > UDMA/133
> > > > > > > > [    3.224218] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ
> > > > (depth
> > > > > > > 31/32), AA
> > > > > > > > [    3.225637] ata3.00: configured for UDMA/133
> > > > > > > > [    3.241448] scsi 2:0:0:0: Direct-Access     ATA      WDC
> > > > > WD1600BEVT-1
> > > > > > > 11.0 PQ: 0 ANSI: 5
> > > > > > > > [    3.561839] ata4: SATA link down (SStatus 0 SControl 300)
> > > > > > > > [    3.897840] ata5: SATA link down (SStatus 0 SControl 300)
> > > > > > > > [    4.233836] ata6: SATA link down (SStatus 0 SControl 300)
> > > > > > > > [    4.255114] sd 2:0:0:0: [sda] 312581808 512-byte logical
> > > > blocks:
> > > > > (160
> > > > > > > GB/149 GiB)
> > > > > > > > [    4.255215] sd 2:0:0:0: [sda] Write Protect is off
> > > > > > > > [    4.255217] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > > > > > > > [    4.255243] sd 2:0:0:0: [sda] Write cache: enabled, read
> > cache:
> > > > > > > enabled, doesn't support DPO or FUA
> > > > > > > > [    4.255362]  sda: sda1 sda2 sda3
> > > > > > > > [    4.296473] sd 2:0:0:0: [sda] Attached SCSI disk
> > > > > > > > [    4.666757] PM: Starting manual resume from disk
> > > > > > > > [    4.666760] PM: Resume from partition 8:1
> > > > > > > > [    4.666761] PM: Checking hibernation image.
> > > > > > > > [    4.666931] PM: Error -22 checking image file
> > > > > > > > [    4.666935] PM: Resume from disk failed.
> > > > > > > > [    4.697936] kjournald starting.  Commit interval 5 seconds
> > > > > > > > [    4.697944] EXT3-fs: mounted filesystem with ordered data
> > mode.
> > > > > > > > [    5.888261] udev[430]: starting version 164
> > > > > > > > [    6.432905] input: PC Speaker as
> > > > > > > /devices/platform/pcspkr/input/input1
> > > > > > > > [    6.568194] ACPI: SSDT 00000000b3790230 01550 (v01 DpgPmm 
> > > > > P001Ist
> > > > > > > 00000011 INTL 20051117)
> > > > > > > > [    6.568723] ACPI: SSDT 00000000b3791780 004F4 (v01  PmRef 
> > > > > P001Cst
> > > > > > > 00003001 INTL 20051117)
> > > > > > > > [    6.570962] ACPI: CPU-1 (power states: C1[C1] C2[C3]
> > C3[C3])
> > > > > > > > [    6.571721] input: Power Button as
> > > > > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
> > > > > > > > [    6.571778] ACPI: Power Button [PWRB]
> > > > > > > > [    6.572232] ACPI: CPU-1 (power states: C1[C1] C2[C3]
> > C3[C3])
> > > > > > > > [    6.572323] input: Power Button as
> > > > > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> > > > > > > > [    6.572343] ACPI: Power Button [PWRF]
> > > > > > > > [    6.574038] ACPI: CPU-1 (power states: C1[C1] C2[C3]
> > C3[C3])
> > > > > > > > [    6.575905] ACPI: CPU-1 (power states: C1[C1] C2[C3]
> > C3[C3])
> > > > > > > > [    6.607540] xen: registering gsi 18 triggering 0 polarity 1
> > > > > > > > [    6.607550]   alloc irq_desc for 18 on node -1
> > > > > > > > [    6.607554]   alloc kstat_irqs on node -1
> > > > > > > > [    6.607561] xen: --> irq=18
> > > > > > > > [    6.607572] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18
> > > > (level,
> > > > > low)
> > > > > > > -> IRQ 18
> > > > > > > > [    6.788122] Error: Driver 'pcspkr' is already registered,
> > > > > aborting...
> > > > > > > > [    7.853024] Adding 3905528k swap on /dev/sda1.  Priority:-1
> > > > > extents:1
> > > > > > > across:3905528k 
> > > > > > > > [    8.136818] EXT3 FS on sda2, internal journal
> > > > > > > > [    8.290107] device-mapper: uevent: version 1.0.3
> > > > > > > > [    8.290878] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
> > > > > > > initialised: dm-devel@xxxxxxxxxx
> > > > > > > > [    8.531770] loop: module loaded
> > > > > > > > [    9.373955] kjournald starting.  Commit interval 5 seconds
> > > > > > > > [    9.374257] EXT3 FS on sda3, internal journal
> > > > > > > > [    9.374267] EXT3-fs: mounted filesystem with ordered data
> > mode.
> > > > > > > > [   10.691324] r8169: eth0: link up
> > > > > > > > [   10.691342] r8169: eth0: link up
> > > > > > > > [   11.135817] Event-channel device installed.
> > > > > > > > [   11.355966]   alloc irq_desc for 1252 on node -1
> > > > > > > > [   11.355969]   alloc kstat_irqs on node -1
> > > > > > > > [   11.356073]   alloc irq_desc for 1251 on node -1
> > > > > > > > [   11.356075]   alloc kstat_irqs on node -1
> > > > > > > > [   11.356245] XENBUS: Unable to read cpu state
> > > > > > > > [   11.356409] XENBUS: Unable to read cpu state
> > > > > > > > [   11.356600] XENBUS: Unable to read cpu state
> > > > > > > > [   11.356765] XENBUS: Unable to read cpu state
> > > > > > > > [   14.042840] Bridge firewalling registered
> > > > > > > > [   14.323801] r8169: peth0: link up
> > > > > > > > [   14.537439] device peth0 entered promiscuous mode
> > > > > > > > [   14.564436] eth0: port 1(peth0) entering forwarding state
> > > > > > > > [   24.873382] peth0: no IPv6 routers present
> > > > > > > > [   25.313390] eth0: no IPv6 routers present
> > > > > > > 
> > > > > > > > (XEN) Xen version 4.0.1 (Debian 4.0.1-1) (waldi@xxxxxxxxxx)
> > (gcc
> > > > > version
> > > > > > > 4.4.5 20100824 (prerelease) (Debian 4.4.4-11) ) Fri Sep  3
> > 15:38:12
> > > > > UTC
> > > > > > > 2010
> > > > > > > > (XEN) Bootloader: GRUB 1.98+20100804-10
> > > > > > > > (XEN) Command line: placeholder iommu=verbose
> > > > > > > > (XEN) Video information:
> > > > > > > > (XEN)  VGA is text mode 80x25, font 8x16
> > > > > > > > (XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
> > > > > > > > (XEN)  EDID info not retrieved because no DDC retrieval method
> > > > > detected
> > > > > > > > (XEN) Disc information:
> > > > > > > > (XEN)  Found 1 MBR signatures
> > > > > > > > (XEN)  Found 1 EDD information structures
> > > > > > > > (XEN) Xen-e820 RAM map:
> > > > > > > > (XEN)  0000000000000000 - 000000000009e800 (usable)
> > > > > > > > (XEN)  000000000009e800 - 00000000000a0000 (reserved)
> > > > > > > > (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> > > > > > > > (XEN)  0000000000100000 - 00000000b3780000 (usable)
> > > > > > > > (XEN)  00000000b3780000 - 00000000b378e000 (ACPI data)
> > > > > > > > (XEN)  00000000b378e000 - 00000000b37d0000 (ACPI NVS)
> > > > > > > > (XEN)  00000000b37d0000 - 00000000b37e0000 (reserved)
> > > > > > > > (XEN)  00000000b37ed000 - 00000000c0000000 (reserved)
> > > > > > > > (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> > > > > > > > (XEN)  00000000ffe00000 - 0000000100000000 (reserved)
> > > > > > > > (XEN)  0000000100000000 - 0000000138000000 (usable)
> > > > > > > > (XEN) ACPI: RSDP 000FA2A0, 0014 (r0 ACPIAM)
> > > > > > > > (XEN) ACPI: RSDT B3780000, 0044 (r1 7636MS A7636100 20100914
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: FACP B3780200, 0084 (r1 7636MS A7636100 20100914
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: DSDT B37805E0, 747E (r1  A7636 A7636100      100
> > INTL
> > > > > > > 20051117)
> > > > > > > > (XEN) ACPI: FACS B378E000, 0040
> > > > > > > > (XEN) ACPI: APIC B3780390, 008C (r1 7636MS A7636100 20100914
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: MCFG B3780420, 003C (r1 7636MS OEMMCFG  20100914
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: OEMB B378E040, 0072 (r1 7636MS A7636100 20100914
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: HPET B378A5E0, 0038 (r1 7636MS OEMHPET  20100914
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: GSCI B378E0C0, 2024 (r1 7636MS GMCHSCI  20100914
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: DMAR B37900F0, 0140 (r1    AMI  OEMDMAR        1
> > MSFT 
> > > >  
> > > > >   
> > > > > > > 97)
> > > > > > > > (XEN) ACPI: SSDT B3791C80, 0363 (r1 DpgPmm    CpuPm       12
> > INTL
> > > > > > > 20051117)
> > > > > > > > (XEN) System RAM: 3767MB (3857528kB)
> > > > > > > > (XEN) Domain heap initialised
> > > > > > > > (XEN) Processor #0 6:5 APIC version 21
> > > > > > > > (XEN) Processor #4 6:5 APIC version 21
> > > > > > > > (XEN) Processor #1 6:5 APIC version 21
> > > > > > > > (XEN) Processor #5 6:5 APIC version 21
> > > > > > > > (XEN) IOAPIC[0]: apic_id 6, version 32, address 0xfec00000,
> > GSI
> > > > 0-23
> > > > > > > > (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> > > > > > > > (XEN) [VT-D]dmar.c:687: Host address width 36
> > > > > > > > (XEN) [VT-D]dmar.c:702: found ACPI_DMAR_DRHD:
> > > > > > > > (XEN) [VT-D]dmar.c:398:   dmaru->address = fed90000
> > > > > > > > (XEN) [VT-D]iommu.c:1081: drhd->address = fed90000 iommu->reg
> > =
> > > > > > > ffff82c3fff57000
> > > > > > > > (XEN) [VT-D]iommu.c:1083: cap = c9008020e30272 ecap = 1000
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1b.0
> > > > > > > > (XEN) [VT-D]dmar.c:702: found ACPI_DMAR_DRHD:
> > > > > > > > (XEN) [VT-D]dmar.c:398:   dmaru->address = fed91000
> > > > > > > > (XEN) [VT-D]iommu.c:1081: drhd->address = fed91000 iommu->reg
> > =
> > > > > > > ffff82c3fff56000
> > > > > > > > (XEN) [VT-D]iommu.c:1083: cap = c0000020230272 ecap = 1000
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:2.0
> > > > > > > > (XEN) [VT-D]dmar.c:702: found ACPI_DMAR_DRHD:
> > > > > > > > (XEN) [VT-D]dmar.c:398:   dmaru->address = fed93000
> > > > > > > > (XEN) [VT-D]iommu.c:1081: drhd->address = fed93000 iommu->reg
> > =
> > > > > > > ffff82c3fff55000
> > > > > > > > (XEN) [VT-D]iommu.c:1083: cap = c9008020630272 ecap = 1000
> > > > > > > > (XEN) [VT-D]dmar.c:412:   flags: INCLUDE_ALL
> > > > > > > > (XEN) [VT-D]dmar.c:707: found ACPI_DMAR_RMRR:
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.0
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.1
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.2
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.3
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.0
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.1
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.2
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.3
> > > > > > > > (XEN) [VT-D]dmar.c:579:   RMRR region: base_addr ed000
> > end_address
> > > > > effff
> > > > > > > > (XEN) [VT-D]dmar.c:707: found ACPI_DMAR_RMRR:
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:2.0
> > > > > > > > (XEN) [VT-D]dmar.c:579:   RMRR region: base_addr b7c00000
> > > > > end_address
> > > > > > > bfffffff
> > > > > > > > (XEN) [VT-D]dmar.c:707: found ACPI_DMAR_RMRR:
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.0
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.1
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.2
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1d.3
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.0
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.1
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.2
> > > > > > > > (XEN) [VT-D]dmar.c:335:   endpoint: 0:1a.3
> > > > > > > > (XEN) [VT-D]dmar.c:579:   RMRR region: base_addr b37ed000
> > > > > end_address
> > > > > > > b37fffff
> > > > > > > > (XEN) Using scheduler: SMP Credit Scheduler (credit)
> > > > > > > > (XEN) Detected 3192.055 MHz processor.
> > > > > > > > (XEN) Initing memory sharing.
> > > > > > > > (XEN) VMX: Supported advanced features:
> > > > > > > > (XEN)  - APIC MMIO access virtualisation
> > > > > > > > (XEN)  - APIC TPR shadow
> > > > > > > > (XEN)  - Extended Page Tables (EPT)
> > > > > > > > (XEN)  - Virtual-Processor Identifiers (VPID)
> > > > > > > > (XEN)  - Virtual NMI
> > > > > > > > (XEN)  - MSR direct-access bitmap
> > > > > > > > (XEN)  - Unrestricted Guest
> > > > > > > > (XEN) EPT supports 2MB super page.
> > > > > > > > (XEN) HVM: ASIDs enabled.
> > > > > > > > (XEN) HVM: VMX enabled
> > > > > > > > (XEN) HVM: Hardware Assisted Paging detected.
> > > > > > > > (XEN) Intel VT-d Snoop Control not supported.
> > > > > > > > (XEN) Intel VT-d DMA Passthrough not supported.
> > > > > > > > (XEN) Intel VT-d Queued Invalidation not supported.
> > > > > > > > (XEN) Intel VT-d Interrupt Remapping not supported.
> > > > > > > > (XEN) I/O virtualisation enabled
> > > > > > > > (XEN)  - Dom0 mode: Relaxed
> > > > > > > > (XEN) Enabled directed EOI with ioapic_ack_old on!
> > > > > > > > (XEN) Total of 4 processors activated.
> > > > > > > > (XEN) ENABLING IO-APIC IRQs
> > > > > > > > (XEN)  -> Using old ACK method
> > > > > > > > (XEN) TSC is reliable, synchronization unnecessary
> > > > > > > > (XEN) Platform timer is 14.318MHz HPET
> > > > > > > > (XEN) Allocated console ring of 16 KiB.
> > > > > > > > (XEN) Brought up 4 CPUs
> > > > > > > > (XEN) *** LOADING DOMAIN 0 ***
> > > > > > > > (XEN)  Xen  kernel: 64-bit, lsb, compat32
> > > > > > > > (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 ->
> > 0x16b6000
> > > > > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > > > > > > > (XEN)  Dom0 alloc.:   0000000130000000->0000000134000000
> > (902692
> > > > > pages
> > > > > > > to be allocated)
> > > > > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT:
> > > > > > > > (XEN)  Loaded kernel: ffffffff81000000->ffffffff816b6000
> > > > > > > > (XEN)  Init. ramdisk: ffffffff816b6000->ffffffff8326ea00
> > > > > > > > (XEN)  Phys-Mach map: ffffffff8326f000->ffffffff83972120
> > > > > > > > (XEN)  Start info:    ffffffff83973000->ffffffff839734b4
> > > > > > > > (XEN)  Page tables:   ffffffff83974000->ffffffff83995000
> > > > > > > > (XEN)  Boot stack:    ffffffff83995000->ffffffff83996000
> > > > > > > > (XEN)  TOTAL:         ffffffff80000000->ffffffff83c00000
> > > > > > > > (XEN)  ENTRY ADDRESS: ffffffff81506200
> > > > > > > > (XEN) Dom0 has maximum 4 VCPUs
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:0.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:2.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:16.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.1
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.2
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1a.3
> > > > > > > > (XEN) [VT-D]iommu.c:1332: d0:PCIe: map bdf = 0:1b.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.1
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.2
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1d.3
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1f.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1f.2
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = 0:1f.3
> > > > > > > > (XEN) [VT-D]iommu.c:1332: d0:PCIe: map bdf = 1:0.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:0.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:0.1
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.0
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.1
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.2
> > > > > > > > (XEN) [VT-D]iommu.c:1339: d0:PCI: map bdf = ff:2.3
> > > > > > > > (XEN) [VT-D]iommu.c:698: iommu_enable_translation: iommu->reg
> > =
> > > > > > > ffff82c3fff56000
> > > > > > > > (XEN) [VT-D]iommu.c:821: iommu_fault_status: Fault Overflow
> > > > > > > > (XEN) [VT-D]iommu.c:824: iommu_fault_status: Primary Pending
> > Fault
> > > > > > > > (XEN) [VT-D]iommu.c:799: DMAR:[DMA Write] Request device
> > [00:02.0]
> > > > > fault
> > > > > > > addr ffffff000, iommu reg = ffff82c3fff56000
> > > > > > > > (XEN) DMAR:[fault reason 05h] PTE Write access is not set
> > > > > > > > (XEN) print_vtd_entries: iommu = ffff830137cf8950 bdf = 0:2.0
> > gmfn
> > > > =
> > > > > > > ffffff
> > > > > > > > (XEN)     root_entry = ffff830137c3b000
> > > > > > > > (XEN)     root_entry[0] = 7737001
> > > > > > > > (XEN)     context = ffff830007737000
> > > > > > > > (XEN)     context[10] = 1_80fe001
> > > > > > > > (XEN)     l3 = ffff8300080fe000
> > > > > > > > (XEN)     l3_index = 3f
> > > > > > > > (XEN)     l3[3f] = 0
> > > > > > > > (XEN)     l3[3f] not present
> > > > > > > > (XEN) [VT-D]iommu.c:698: iommu_enable_translation: iommu->reg
> > =
> > > > > > > ffff82c3fff57000
> > > > > > > > (XEN) [VT-D]iommu.c:698: iommu_enable_translation: iommu->reg
> > =
> > > > > > > ffff82c3fff55000
> > > > > > > > (XEN) Scrubbing Free RAM: .done.
> > > > > > > > (XEN) Xen trace buffers: disabled
> > > > > > > > (XEN) Std. Loglevel: Errors and warnings
> > > > > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and
> > warnings)
> > > > > > > > (XEN) Xen is relinquishing VGA console.
> > > > > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to
> > > > switch
> > > > > > > input to Xen)
> > > > > > > > (XEN) Freed 176kB init memory.
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > 
> > > > > > > _______________________________________________
> > > > > > > Xen-users mailing list
> > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > http://lists.xensource.com/xen-users
> > > > > > 
> > > > > > -- 
> > > > > > GMX DSL Doppel-Flat ab 19,99 Euro/mtl.! Jetzt auch mit 
> > > > > > gratis Notebook-Flat! http://portal.gmx.net/de/go/dsl
> > > > 
> > > > -- 
> > > > Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
> > > > belohnen Sie mit bis zu 100,- Euro!
> > https://freundschaftswerbung.gmx.de
> > > > 
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > http://lists.xensource.com/xen-users
> > > 
> > > -- 
> > > Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir
> > > belohnen Sie mit bis zu 100,- Euro! https://freundschaftswerbung.gmx.de
> > 
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> 
> -- 
> Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief!  
> Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>
  • [Xen-devel] Re: [Xen-users] Xen VGA Passthrough with Core CPU integrated graphics, Pasi Kärkkäinen <=