domid: 1
config qemu network with xen bridge for  tap1.0 br0
Using file /dev/local/XP in read-write mode
Watching /local/domain/0/device-model/1/logdirty/cmd
Watching /local/domain/0/device-model/1/command
char device redirected to /dev/pts/1
qemu_map_cache_init nr_buckets = 10000 size 4194304
/usr/src/packages/BUILD/xen-4.0.1-testing/tools/ioemu-dir/hw/xen_blktap.c:715: Init blktap pipes
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 8f6bf60c-f931-d1a5-efda-cbbe66724cfa
Time offset set 0
populating video RAM at ff000000
do_xenmem_op_retry: cmd 6 count 400
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/8f6bf60c-f931-d1a5-efda-cbbe66724cfa/vncpasswd.
medium change watch on `hdc' (index: 1): 
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/1/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
dm-command: hot insert pass-through pci dev 
register_real_device: Assigning real physical device 02:00.0 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init: No such device: setup io multiplexing failed! 0x2:0x0.0x0
pt_register_regions: IO region registered (size=0x00000020 base_addr=0x0000dc81)
pt_register_regions: IO region registered (size=0x00001000 base_addr=0xf79fc000)
pt_register_regions: IO region registered (size=0x00000020 base_addr=0x0000dca1)
pt_register_regions: IO region registered (size=0x00001000 base_addr=0xf79fd000)
pci_intx: intx=1
register_real_device: Real physical device 02:00.0 registered successfuly!
IRQ type = INTx
dm-command: hot insert pass-through pci dev 
register_real_device: Assigning real physical device 02:00.1 ...
register_real_device: Enable MSI translation via per device option
register_real_device: Disable power management
pt_iomul_init: Error: pt_iomul_init: No such device: setup io multiplexing failed! 0x2:0x0.0x1
pt_register_regions: IO region registered (size=0x00000020 base_addr=0x0000dcc1)
pt_register_regions: IO region registered (size=0x00001000 base_addr=0xf79fe000)
pt_register_regions: IO region registered (size=0x00000020 base_addr=0x0000dce1)
pt_register_regions: IO region registered (size=0x00001000 base_addr=0xf79ff000)
pci_intx: intx=1
register_real_device: Real physical device 02:00.1 registered successfuly!
IRQ type = INTx