RE: [Xen-devel] [xen/stable-2.6.32.x PATCH 0/5] SR-IOV: Backport VF MAC and VLAN configuration to 2.6.32.x

["Rose, Gregory V" <gregory.v.rose@xxxxxxxxx>]

>-----Original Message-----
>From: Jeremy Fitzhardinge [mailto:jeremy@xxxxxxxx]
>Sent: Thursday, July 15, 2010 2:12 PM
>To: Rose, Gregory V
>Cc: 'xen-devel@xxxxxxxxxxxxxxxxxxx'
>Subject: Re: [Xen-devel] [xen/stable-2.6.32.x PATCH 0/5] SR-IOV:
>Backport VF MAC and VLAN configuration to 2.6.32.x
>
>
>I just cherry-picked the original patches onto v2.6.32 and pushed the
>results as the "sr-iov" branch.  Please check it and I'll merge it in
>when you give the all-clear.
>
>Thanks,
>    J

I seem to have run into a problem.  I've built the kernel but it won't boot.  
At all.

On my serial console I get the output below and then the system hangs.  Takes a 
power cycle to bring it back.

The base distro is SLES 11.

Pretty odd, I'm able to boot all the recent upstream kernels just fine.  I'll 
try building without Xen enabled.  It's not necessary to test the patches.

- Greg 

Booting 'Xen 4.0 2.6.32-xen'

root (hd0,1)
 Filesystem type is ext2fs, partition type 0x83
kernel /boot/xen-4.0.1.gz
   [Multiboot-elf, <0x100000:0x164000:0x143000>, shtab=0x3a7078, entry=0x100000
]
module /boot/bzImage-2.6.32-5-default root=/dev/disk/by-id/ata-Maxtor_7Y250M0_Y
62EWV6E-part2 resume=/dev/disk/by-id/ata-Maxtor_7Y250M0_Y62EWV6E-part1 splash=s
ilent showopts vga=0x31a console=tty0 console=ttyS0,115200 max_loop=128
   [Multiboot-module @ 0x3a8000, 0x278860 bytes]
module /boot/initrd-2.6.32-5-default.img
   [Multiboot-module @ 0x621000, 0x23b9400 bytes]



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel