I had hvm domU working fine. This problem is specific to my pv-ops
config. I'm not seeing any PCI devices after I bring up the domU. I
was able to get this working as an hvm instance, but not pv.
I'd appreciate if anyone could offer some insight as to why I can't
see the PCI devices in domU.
I've gone through these
http://wiki.xensource.com/xenwiki/XenPCIpassthrough
I sync'd up with Jeremy's 2.6.32x tree and xen 4.0.1-rc3.pre current
as of today.
The hardware is a proliant G5 (intel X58 chipset) with dual i7's.
The dom0 shows these devices available:
xm pci-list-assignable-devices
0000:17:00.0
0000:17:00.1
0000:14:00.0
0000:14:00.1
0000:10:00.0
0000:10:00.1
0000:10:00.2
0000:10:00.3
0000:0a:00.0
0000:0a:00.1
0000:07:00.0
0000:07:00.1
0000:07:00.2
0000:07:00.3
but the domU see's nothing:
~# lspci
~#
Are there any boot options that need to change from hvm to pv
regarding pci passthrough/iommu settings?
I'm using:
menuentry "Xen osa-dom0 6.0.14-01, linux 2.6.32.15" {
multiboot /boot/xen.gz dummy=dummy console=com1 115200,8n1
dom0_mem=512M dom0_max_vcpus=1 dom0_vcpus_pin=true
iommu=1,passthrough,no-intremap loglvl=all loglvl_guest=all loglevl=10
debug acpi=force apic=on apic_verbosity=verbose numa=on
extra_guest_irqs=80
module /boot/vmlinuz-2.6.32.15
root=UUID=89eb87f0-58af-47e0-a1e4-dfbbac9e57bf ro earlyprintk=xen
loglevel=10 debug acpi=force console=hvc0,115200n8
module /boot/initrd.img-2.6.32.15 /boot/initrd.img-2.6.32.15
Are these messages from the domU boot significant?
[ 0.000000] No local APIC present
[ 0.000000] APIC: disable apic facility
[ 0.000000] PCI: Warning: Cannot find a gap in the 32bit address range
[ 0.000000] PCI: Unassigned devices with 32bit resource registers may break!
[ 0.000000] Allocating PCI resources starting at 100100000 (gap:
100100000:400000)
I'm running the same kernel on dom0 and domU.
I attached the .config, the dom0 kern.log, /var/log/xen/* and the domU
boot is inline below.
To unbind the PCI devices from dom0 I ran:
echo 0000:17:00.0 > /sys/bus/pci/drivers/pci-stub/unbind
echo 0000:14:00.0 > /sys/bus/pci/drivers/pci-stub/unbind
echo 0000:10:00.0 > /sys/bus/pci/drivers/pci-stub/unbind
echo 0000:0a:00.0 > /sys/bus/pci/drivers/pci-stub/unbind
echo 0000:07:00.0 > /sys/bus/pci/drivers/pci-stub/unbind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:07:00.0 > /sys/bus/pci/devices/0000:07:00.0/driver/unbind
echo 0000:07:00.0 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:07:00.1 > /sys/bus/pci/devices/0000:07:00.1/driver/unbind
echo 0000:07:00.1 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:07:00.2 > /sys/bus/pci/devices/0000:07:00.2/driver/unbind
echo 0000:07:00.2 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:07:00.3 > /sys/bus/pci/devices/0000:07:00.3/driver/unbind
echo 0000:07:00.3 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:0a:00.0 > /sys/bus/pci/devices/0000:0a:00.0/driver/unbind
echo 0000:0a:00.0 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:0a:00.1 > /sys/bus/pci/devices/0000:0a:00.1/driver/unbind
echo 0000:0a:00.1 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:10:00.0 > /sys/bus/pci/devices/0000:10:00.0/driver/unbind
echo 0000:10:00.0 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:10:00.1 > /sys/bus/pci/devices/0000:10:00.1/driver/unbind
echo 0000:10:00.1 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:10:00.2 > /sys/bus/pci/devices/0000:10:00.2/driver/unbind
echo 0000:10:00.2 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:10:00.3 > /sys/bus/pci/devices/0000:10:00.3/driver/unbind
echo 0000:10:00.3 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:14:00.0 > /sys/bus/pci/devices/0000:14:00.0/driver/unbind
echo 0000:14:00.0 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:14:00.1 > /sys/bus/pci/devices/0000:14:00.1/driver/unbind
echo 0000:14:00.1 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:17:00.0 > /sys/bus/pci/devices/0000:17:00.0/driver/unbind
echo 0000:17:00.0 > /sys/bus/pci/drivers/pci-stub/bind
echo 11f8 8032 > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:17:00.1 > /sys/bus/pci/devices/0000:17:00.1/driver/unbind
echo 0000:17:00.1 > /sys/bus/pci/drivers/pci-stub/bind
Here's the domU boot log:
root = /dev/nfs
nfs_server = 135.149.75.134
nfs_root = /home/root,tcp
initrd = /import/root/boot/initrd.img-2.6.32.14.nfs
builder = linux
kernel =
/import/kaan/bedge/dev_kaan_kernel.kaan.debug/root/boot/vmlinuz-2.6.32.14
memory = 4096
extra = root=/dev/nfs ip=dhcp raid=noautodetect
bigphysarea=128000 kdb=on nmi_watchdog=1 init_cpus=0 console=hvc0
pci = ['10:00.3@10', '10:00.2@11', '10:00.1@12',
'10:00.0@13', '07:00.3@14', '07:00.2@15', '07:00.1@16', '07:00.0@17',
'17:00.0@18', '17:00.1@19', '14:00.0@1a', '14:00.1@1b', '0a:00.0@1c',
'0a:00.1@1d']
vif = ['model=e1000, bridge=eth0,
mac=00:16:3e:00:22:01,vifname=vif-target']
Started domain dpm (id=2)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.14 (root@kaan) (gcc version 4.3.3
(Ubuntu 4.3.3-5ubuntu4) ) #1 SMP Thu Jun 10 09:10:45 PDT 2010
[ 0.000000] Command line:
nfsroot=135.149.75.134:/home/bedge/dev_kaan_kernel.kaan.debug/root,tcp
root=/dev/nfs ip=dhcp raid=noautodetect bigphysarea=128000 kdb=on
nmi_watchdog=1 init_cpus=0 console=hvc0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000100000000 (usable)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x100000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000100000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-0000000100000000
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0100000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [00022b3000 - 00022c8000] XEN PAGETABLES ==>
[00022b3000 - 00022c8000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 0001a8fa08] TEXT DATA BSS ==>
[0001000000 - 0001a8fa08]
[ 0.000000] #4 [0001ab0000 - 00022b3000] XEN START INFO ==>
[0001ab0000 - 00022b3000]
[ 0.000000] #5 [0000100000 - 00008ed000] PGTABLE ==>
[0000100000 - 00008ed000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00100000
[ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present
[ 0.000000] APIC: disable apic facility
[ 0.000000] PCI: Warning: Cannot find a gap in the 32bit address range
[ 0.000000] PCI: Unassigned devices with 32bit resource registers may break!
[ 0.000000] Allocating PCI resources starting at 100100000 (gap:
100100000:400000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1-rc3-pre (preserve-AD)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800022e7000 s88536
r8192 d22056 u118784
[ 0.000000] pcpu-alloc: s88536 r8192 d22056 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05
[0] 06 [0] 07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13
[0] 14 [0] 15
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1032107
[ 0.000000] Kernel command line:
nfsroot=135.149.75.134:/home/bedge/dev_kaan_kernel.kaan.debug/root,tcp
root=/dev/nfs ip=dhcp raid=noautodetect bigphysarea=128000 kdb=on
nmi_watchdog=1 init_cpus=0 console=hvc0
[ 0.000000] init_cpus[0]=1
[ 0.000000] setting init process cpumask to 1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 4100524k/4194304k available (5628k kernel code,
404k absent, 92864k reserved, 3205k data, 608k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:656
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2533.490 MHz processor.
[ 0.010000] Calibrating delay loop (skipped), value calculated
using timer frequency.. 5066.98 BogoMIPS (lpj=25334900)
[ 0.010037] kdb version 4.4 by Keith Owens, Scott Lurndal.
Copyright SGI, All Rights Reserved
kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
kdb_cmd[8]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
kdb_cmd[15]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
[ 0.010164] Security Framework initialized
[ 0.010175] SELinux: Disabled at boot.
[ 0.010185] Mount-cache hash table entries: 256
[ 0.010326] Initializing cgroup subsys ns
[ 0.010333] Initializing cgroup subsys cpuacct
[ 0.010339] Initializing cgroup subsys memory
[ 0.010350] Initializing cgroup subsys freezer
[ 0.010385] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010392] CPU: L2 cache: 256K
[ 0.010395] CPU: L3 cache: 8192K
[ 0.010401] CPU: Physical Processor ID: 0
[ 0.010404] CPU: Processor Core ID: 0
[ 0.010409] Performance Events: unsupported p6 CPU model 26 no PMU
driver, software events only.
[ 0.010428] SMP alternatives: switching to UP code
[ 0.020056] cpu 0 spinlock event irq 654
[ 0.020348] installing Xen timer for CPU 1
[ 0.020373] cpu 1 spinlock event irq 648
[ 0.020394] SMP alternatives: switching to SMP code
[ 0.000015] Initializing CPU#1
[ 0.000081] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000086] CPU: L2 cache: 256K
[ 0.000089] CPU: L3 cache: 8192K
[ 0.000094] CPU: Physical Processor ID: 0
[ 0.000097] CPU: Processor Core ID: 0
[ 0.030372] installing Xen timer for CPU 2
[ 0.030372] cpu 2 spinlock event irq 642
[ 0.000010] Initializing CPU#2
[ 0.000061] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000066] CPU: L2 cache: 256K
[ 0.000068] CPU: L3 cache: 8192K
[ 0.000074] CPU: Physical Processor ID: 0
[ 0.000076] CPU: Processor Core ID: 0
[ 0.030822] installing Xen timer for CPU 3
[ 0.030822] cpu 3 spinlock event irq 636
[ 0.000010] Initializing CPU#3
[ 0.000059] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000064] CPU: L2 cache: 256K
[ 0.000067] CPU: L3 cache: 8192K
[ 0.000072] CPU: Physical Processor ID: 0
[ 0.000075] CPU: Processor Core ID: 0
[ 0.031235] installing Xen timer for CPU 4
[ 0.031235] cpu 4 spinlock event irq 630
[ 0.000010] Initializing CPU#4
[ 0.000058] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000063] CPU: L2 cache: 256K
[ 0.000065] CPU: L3 cache: 8192K
[ 0.000071] CPU: Physical Processor ID: 0
[ 0.000074] CPU: Processor Core ID: 0
[ 0.031661] installing Xen timer for CPU 5
[ 0.170047] cpu 5 spinlock event irq 624
[ 0.000010] Initializing CPU#5
[ 0.000059] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000064] CPU: L2 cache: 256K
[ 0.000066] CPU: L3 cache: 8192K
[ 0.000072] CPU: Physical Processor ID: 0
[ 0.000074] CPU: Processor Core ID: 0
[ 0.174685] installing Xen timer for CPU 6
[ 0.174685] cpu 6 spinlock event irq 618
[ 0.000009] Initializing CPU#6
[ 0.000056] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000060] CPU: L2 cache: 256K
[ 0.000062] CPU: L3 cache: 8192K
[ 0.000067] CPU: Physical Processor ID: 0
[ 0.000069] CPU: Processor Core ID: 0
[ 0.175143] installing Xen timer for CPU 7
[ 0.175143] cpu 7 spinlock event irq 612
[ 0.000010] Initializing CPU#7
[ 0.000059] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000064] CPU: L2 cache: 256K
[ 0.000067] CPU: L3 cache: 8192K
[ 0.000072] CPU: Physical Processor ID: 0
[ 0.000075] CPU: Processor Core ID: 0
[ 0.175606] installing Xen timer for CPU 8
[ 0.175606] cpu 8 spinlock event irq 606
[ 0.000009] Initializing CPU#8
[ 0.000055] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000059] CPU: L2 cache: 256K
[ 0.000061] CPU: L3 cache: 8192K
[ 0.000065] CPU: Physical Processor ID: 0
[ 0.000068] CPU: Processor Core ID: 0
[ 0.176088] installing Xen timer for CPU 9
[ 0.176088] cpu 9 spinlock event irq 600
[ 0.000008] Initializing CPU#9
[ 0.000055] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000060] CPU: L2 cache: 256K
[ 0.000063] CPU: L3 cache: 8192K
[ 0.000068] CPU: Physical Processor ID: 0
[ 0.000071] CPU: Processor Core ID: 0
[ 0.176599] installing Xen timer for CPU 10
[ 0.176599] cpu 10 spinlock event irq 594
[ 0.000008] Initializing CPU#10
[ 0.000053] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000058] CPU: L2 cache: 256K
[ 0.000060] CPU: L3 cache: 8192K
[ 0.000065] CPU: Physical Processor ID: 0
[ 0.000068] CPU: Processor Core ID: 0
[ 0.177066] installing Xen timer for CPU 11
[ 0.177066] cpu 11 spinlock event irq 588
[ 0.000009] Initializing CPU#11
[ 0.000055] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000060] CPU: L2 cache: 256K
[ 0.000063] CPU: L3 cache: 8192K
[ 0.000068] CPU: Physical Processor ID: 0
[ 0.000071] CPU: Processor Core ID: 0
[ 0.177529] installing Xen timer for CPU 12
[ 0.177529] cpu 12 spinlock event irq 582
[ 0.000008] Initializing CPU#12
[ 0.000052] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000056] CPU: L2 cache: 256K
[ 0.000058] CPU: L3 cache: 8192K
[ 0.000063] CPU: Physical Processor ID: 0
[ 0.000065] CPU: Processor Core ID: 0
[ 0.177982] installing Xen timer for CPU 13
[ 0.177982] cpu 13 spinlock event irq 576
[ 0.000009] Initializing CPU#13
[ 0.000055] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000060] CPU: L2 cache: 256K
[ 0.000062] CPU: L3 cache: 8192K
[ 0.000068] CPU: Physical Processor ID: 0
[ 0.000070] CPU: Processor Core ID: 0
[ 0.178445] installing Xen timer for CPU 14
[ 0.178445] cpu 14 spinlock event irq 570
[ 0.000008] Initializing CPU#14
[ 0.000056] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000060] CPU: L2 cache: 256K
[ 0.000062] CPU: L3 cache: 8192K
[ 0.000067] CPU: Physical Processor ID: 0
[ 0.000069] CPU: Processor Core ID: 0
[ 0.178896] installing Xen timer for CPU 15
[ 0.178896] cpu 15 spinlock event irq 564
[ 0.000009] Initializing CPU#15
[ 0.000055] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000060] CPU: L2 cache: 256K
[ 0.000063] CPU: L3 cache: 8192K
[ 0.000068] CPU: Physical Processor ID: 0
[ 0.000071] CPU: Processor Core ID: 0
[ 0.178896] Brought up 16 CPUs
[ 0.182662] Grant table initialized
[ 0.182671] regulator: core version 0.5
[ 0.182755] NET: Registered protocol family 16
[ 0.185945] PCI: setting up Xen PCI frontend stub
[ 0.189397] bio: create slab <bio-0> at 0
[ 0.190440] ACPI: Interpreter disabled.
[ 0.193793] xen_balloon: Initialising balloon driver with page order 0.
[ 0.194019] vgaarb: loaded
[ 0.194019] SCSI subsystem initialized
[ 0.195724] usbcore: registered new interface driver usbfs
[ 0.195724] usbcore: registered new interface driver hub
[ 0.195865] usbcore: registered new device driver usb
[ 0.195962] PCI: System does not support PCI
[ 0.195962] PCI: System does not support PCI
[ 0.195962] NetLabel: Initializing
[ 0.195962] NetLabel: domain hash size = 128
[ 0.195962] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.195962] NetLabel: unlabeled traffic allowed by default
[ 0.195962] Switching to clocksource xen
[ 0.197558] pnp: PnP ACPI: disabled
[ 0.197558] NET: Registered protocol family 2
[ 0.197558] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.197558] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.197558] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.197558] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.202508] TCP reno registered
[ 0.377078] NET: Registered protocol family 1
[ 0.378157] RPC: Registered udp transport module.
[ 0.378157] RPC: Registered tcp transport module.
[ 0.378157] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.378318] platform rtc_cmos: registered platform RTC device (no
PNP device found)
[ 0.379715] Scanning for low memory corruption every 60 seconds
[ 0.380152] audit: initializing netlink socket (disabled)
[ 0.380171] type=2000 audit(1276184586.557:1): initialized
[ 0.387843] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.390344] VFS: Disk quotas dquot_6.5.2
[ 0.390446] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.391143] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 0.391355] fuse init (API version 7.13)
[ 0.391449] msgmni has been set to 8009
[ 0.392802] alg: No test for stdrng (krng)
[ 0.392816] io scheduler noop registered
[ 0.392816] io scheduler anticipatory registered
[ 0.392816] io scheduler deadline registered (default)
[ 0.392816] io scheduler cfq registered
[ 0.392922] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.392952] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.392971] pci-stub: invalid id string ""
[ 0.413634] Event-channel device installed.
[ 0.415727] blktap_device_init: blktap device major 253
[ 0.415738] blktap_ring_init: blktap ring major: 254
[ 0.423053] registering netback
[ 0.423122] xen-platform-pcifailed backend handshake: unrecognised
magic value
[ 0.425494] brd: module loaded
[ 0.426026] loop: module loaded
[ 0.426147] Initialising Xen virtual ethernet driver.
[ 0.427868] pcifront pci-0: backend going away!
[ 0.444704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.444704] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.444704] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.444704] usbcore: registered new interface driver usblp
[ 0.444704] Initializing USB Mass Storage driver...
[ 0.444704] usbcore: registered new interface driver usb-storage
[ 0.444704] USB Mass Storage support registered.
[ 0.444704] usbcore: registered new interface driver libusual
[ 0.444704] PNP: No PS/2 controller found. Probing ports directly.
[ 0.445167] i8042.c: No controller found.
[ 0.445203] mice: PS/2 mouse device common for all mice
[ 0.445291] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 0.445433] device-mapper: uevent: version 1.0.3
[ 0.446132] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@xxxxxxxxxx
[ 0.450190] device-mapper: multipath: version 1.1.0 loaded
[ 0.450198] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.451549] cpuidle: using governor ladder
[ 0.517849] TCP cubic registered
[ 0.518035] NET: Registered protocol family 10
[ 0.519184] lo: Disabled Privacy Extensions
[ 0.520961] NET: Registered protocol family 17
[ 0.521084] registered taskstats version 1
[ 0.521178] XENBUS: Device with no driver: device/console/0
[ 0.521197] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.521203] EDD information not available.
[ 2.040051] Sending DHCP requests ., OK
[ 2.120041] IP-Config: Got DHCP answer from 135.149.78.198, my
address is 135.149.77.123
[ 2.120602] IP-Config: Complete:
[ 2.120609] device=eth0, addr=135.149.77.123,
mask=255.255.252.0, gw=135.149.76.1,
[ 2.120629] host=target, domain=XXXX, nis-domain=(none),
[ 2.120637] bootserver=135.149.78.198, rootserver=135.149.75.134
[ 2.120695] md: Skipping autodetection of RAID arrays.
(raid=autodetect will force)
[ 2.120760] Looking up port of RPC 100003/2 on 135.149.75.134
[ 2.131876] Looking up port of RPC 100005/1 on 135.149.75.134
[ 2.148520] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 2.148697] Freeing unused kernel memory: 608k freed
[ 2.148896] Write protecting the kernel read-only data: 8156k
* Setting hostname to 'target'...
[ OK ]
* Setting preliminary keymap... [ OK ]
* Starting kernel event manager... [ OK ]
* Loading hardware drivers...
[ 4.818275] rtc_cmos rtc_cmos: rtc core: registered
rtc_cmos as rtc0
[ OK ]
* Loading manual drivers...
* Setting kernel variables (/etc/sysctl.conf)...
[ OK ]
* Setting kernel variables
(/etc/sysctl.d/10-console-messages.conf)... kernel.printk = 4
4 1 7
[ OK ]
* Setting kernel variables
(/etc/sysctl.d/10-network-security.conf)...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.tcp_syncookies = 1
[ OK ]
* Activating swap [ OK ]
* Will now check all file systems
fsck 1.41.4 (27-Jan-2009)
Checking all file systems.
* Done checking file systems.
A log is being saved in /var/log/fsck/checkfs if that location is writable.
* Enable login on console [ OK ]
* Will now mount local filesystems [ OK ]
* Will now activate swapfile swap [ OK ]
* Check for hostname changes... [ OK ]
* Get hostname from DNS
* Configuring network interfaces... [ OK ]
* Starting portmap daemon... [ OK ]
* Starting NFS common utilities [ OK ]
* Setting up console font and keymap... [ OK ]
* Initializing random number generator... [ OK ]
* Setting up X server socket directory /tmp/.X11-unix... [ OK ]
* Setting up ICE socket directory /tmp/.ICE-unix... [ OK ]
* Starting system logging syslog-ng [ OK ]
* Starting system message bus dbus [ OK ]
* Starting OpenBSD Secure Shell server sshd [ OK ]
* Starting NFS common utilities [ OK ]
* Starting internet superserver inetd [ OK ]
* Setting sysfs variables... [ OK ]
* Starting ipmi drivers [ OK ]
* Starting deferred execution scheduler atd [ OK ]
* Starting periodic command scheduler crond [ OK ]
* Running local boot scripts (/etc/rc.local) [ OK ]
-Bruce
kern.log
Description: Text Data
xend.log
Description: Text Data
domain-builder-ng.log
Description: Text Data
.config
Description: Binary data
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home