[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.13 (root@serveerstertje) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #3 SMP Fri Apr 16 15:40:16 CEST 2010 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro earlyprintk=xen max_loop=255 xen-pciback.hide=(00:07.0)(01:08.0)(01:08.1)(01:08.2)(09:01.0)(09:01.1)(09:01.2)(05:00.0) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 30000-afee0: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn aff00-b0000: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn c0000-f0000: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn f4000-fec00: 0 pages freed [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] Xen: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] Xen: 00000000afee0000 - 00000000afee3000 (ACPI NVS) [ 0.000000] Xen: 00000000afee3000 - 00000000afef0000 (ACPI data) [ 0.000000] Xen: 00000000afef0000 - 00000000aff00000 (reserved) [ 0.000000] Xen: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] Xen: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] console [xenboot0] enabled [ 0.000000] DMI 2.5 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] modified: 00000000afee0000 - 00000000afee3000 (ACPI NVS) [ 0.000000] modified: 00000000afee3000 - 00000000afef0000 (ACPI data) [ 0.000000] modified: 00000000afef0000 - 00000000aff00000 (reserved) [ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 [ 0.000000] 0000000000 - 0030000000 page 4k [ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000 [ 0.000000] RAMDISK: 01b40000 - 0210a600 [ 0.000000] ACPI: RSDP 00000000000f7550 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000afee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000afeed3c0 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 00000000afee3280 0A0D8 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afee0a80 00040 [ 0.000000] ACPI: SSDT 00000000afeed600 0028A (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000afeed900 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000afeed980 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000afeed500 0008E (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000228c000 - 00022a1000] XEN PAGETABLES ==> [000228c000 - 00022a1000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001b1f408] TEXT DATA BSS ==> [0001000000 - 0001b1f408] [ 0.000000] #4 [0001b40000 - 000210a600] RAMDISK ==> [0001b40000 - 000210a600] [ 0.000000] #5 [000210b000 - 000228c000] XEN START INFO ==> [000210b000 - 000228c000] [ 0.000000] #6 [0001b20000 - 0001b20151] BRK ==> [0001b20000 - 0001b20151] [ 0.000000] #7 [0000100000 - 000026a000] PGTABLE ==> [0000100000 - 000026a000] [ 0.000000] found SMP MP-table at [ffff8800000f59c0] f59c0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00030000 [ 0.000000] On node 0 totalpages: 196493 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 365 pages reserved [ 0.000000] DMA zone: 3560 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 2632 pages used for memmap [ 0.000000] DMA32 zone: 189880 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:7fee0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Allocated 22 4k pages, static data 88096 bytes [ 0.000000] trying to map vcpu_info 0 at ffffc9000000b020, mfn 1f62b8, offset 32 [ 0.000000] cpu 0 using vcpu_info at ffffc9000000b020 [ 0.000000] trying to map vcpu_info 1 at ffffc90000023020, mfn 1f62ce, offset 32 [ 0.000000] cpu 1 using vcpu_info at ffffc90000023020 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193440 [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro earlyprintk=xen max_loop=255 xen-pciback.hide=(00:07.0)(01:08.0)(01:08.1)(01:08.2)(09:01.0)(09:01.1)(09:01.2)(05:00.0) [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) [ 0.000000] xen_swiotlb_fixup: buf=ffff880003122000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880007182000 size=32768 [ 0.000000] Placing 64MB Xen software IO TLB between ffff880003122000 - ffff880007122000 [ 0.000000] Xen software IO TLB at phys 0x3122000 - 0x7122000 [ 0.000000] Memory: 686328k/786432k available (5694k kernel code, 460k absent, 98936k reserved, 4012k data, 560k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] xen: registering gsi 0 triggering 1 polarity 0 [ 0.000000] xen: --> irq=0 [ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 1 triggering 1 polarity 0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 3 triggering 1 polarity 0 [ 0.000000] xen: --> irq=3 [ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 4 triggering 1 polarity 0 [ 0.000000] xen: --> irq=4 [ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 5 triggering 1 polarity 0 [ 0.000000] xen: --> irq=5 [ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 6 triggering 1 polarity 0 [ 0.000000] xen: --> irq=6 [ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 7 triggering 1 polarity 0 [ 0.000000] xen: --> irq=7 [ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 8 triggering 1 polarity 0 [ 0.000000] xen: --> irq=8 [ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> irq=9 [ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 [ 0.000000] xen: registering gsi 10 triggering 1 polarity 0 [ 0.000000] xen: --> irq=10 [ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 11 triggering 1 polarity 0 [ 0.000000] xen: --> irq=11 [ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 12 triggering 1 polarity 0 [ 0.000000] xen: --> irq=12 [ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 13 triggering 1 polarity 0 [ 0.000000] xen: --> irq=13 [ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 14 triggering 1 polarity 0 [ 0.000000] xen: --> irq=14 [ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 15 triggering 1 polarity 0 [ 0.000000] xen: --> irq=15 [ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 [ 0.000000] Detected 2499.998 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console handover: boot [xenboot0] -> real [tty0] [ 0.000999] Xen: using vcpuop timer interface [ 0.000999] installing Xen timer for CPU 0 [ 0.000999] alloc irq_desc for 423 on node 0 [ 0.000999] alloc kstat_irqs on node 0 [ 0.000999] xen: vcpu_time_info placement not supported [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.99 BogoMIPS (lpj=2499998) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys freezer [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] tseg: 00aff00000 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] mce: CPU supports 5 MCE banks [ 0.000999] Performance Counters: AMD PMU driver. [ 0.000999] ------------[ cut here ]------------ [ 0.000999] WARNING: at /usr/src/xen-unstable.hg/linux-2.6-pvops.git/arch/x86/xen/enlighten.c:722 xen_apic_write+0x15/0x17() [ 0.000999] Hardware name: System Product Name [ 0.000999] Modules linked in: [ 0.000999] Pid: 0, comm: swapper Not tainted 2.6.31.13 #3 [ 0.000999] Call Trace: [ 0.000999] [] ? mce_init_timer+0x8f/0x98 [ 0.000999] [] ? xen_apic_write+0x15/0x17 [ 0.000999] [] warn_slowpath_common+0x77/0xa4 [ 0.000999] [] warn_slowpath_null+0xf/0x11 [ 0.000999] [] xen_apic_write+0x15/0x17 [ 0.000999] [] perf_counters_lapic_init+0x2e/0x30 [ 0.000999] [] init_hw_perf_counters+0x305/0x3a2 [ 0.000999] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 0.000999] [] ? kmem_cache_alloc+0xcb/0x12d [ 0.000999] [] identify_boot_cpu+0x3c/0x3e [ 0.000999] [] check_bugs+0x9/0x2d [ 0.000999] [] start_kernel+0x41d/0x432 [ 0.000999] [] x86_64_start_reservations+0xaa/0xae [ 0.000999] [] xen_start_kernel+0x63a/0x641 [ 0.000999] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000999] ... version: 0 [ 0.000999] ... bit width: 48 [ 0.000999] ... generic counters: 4 [ 0.000999] ... value mask: 0000ffffffffffff [ 0.000999] ... max period: 00007fffffffffff [ 0.000999] ... fixed-purpose counters: 0 [ 0.000999] ... counter mask: 000000000000000f [ 0.000999] SMP alternatives: switching to UP code [ 0.001999] ACPI: Core revision 20090521 [ 0.022106] alloc irq_desc for 422 on node 0 [ 0.022110] alloc kstat_irqs on node 0 [ 0.022121] alloc irq_desc for 421 on node 0 [ 0.022123] alloc kstat_irqs on node 0 [ 0.022130] alloc irq_desc for 420 on node 0 [ 0.022133] alloc kstat_irqs on node 0 [ 0.022138] alloc irq_desc for 419 on node 0 [ 0.022141] alloc kstat_irqs on node 0 [ 0.022331] installing Xen timer for CPU 1 [ 0.022536] alloc irq_desc for 418 on node 0 [ 0.022538] alloc kstat_irqs on node 0 [ 0.022578] SMP alternatives: switching to SMP code [ 0.022996] alloc irq_desc for 417 on node 0 [ 0.022996] alloc kstat_irqs on node 0 [ 0.023012] alloc irq_desc for 416 on node 0 [ 0.023014] alloc kstat_irqs on node 0 [ 0.023022] alloc irq_desc for 415 on node 0 [ 0.023025] alloc kstat_irqs on node 0 [ 0.023031] alloc irq_desc for 414 on node 0 [ 0.023034] alloc kstat_irqs on node 0 [ 0.000017] Initializing CPU#1 [ 0.000078] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000082] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000085] CPU: Physical Processor ID: 0 [ 0.000087] CPU: Processor Core ID: 1 [ 0.000091] mce: CPU supports 5 MCE banks [ 0.023176] Brought up 2 CPUs [ 0.024178] Booting paravirtualized kernel on Xen [ 0.024205] Xen version: 4.1-unstable (preserve-AD) (dom0) [ 0.025036] Grant tables using version 2 layout. [ 0.025257] Grant table initialized [ 0.025518] Time: 13:55:02 Date: 04/16/10 [ 0.025781] NET: Registered protocol family 16 [ 0.026057] alloc irq_desc for 413 on node 0 [ 0.026060] alloc kstat_irqs on node 0 [ 0.026129] xenbus_probe_init ok [ 0.027027] node 0 link 0: io port [7000, ffff] [ 0.027027] TOM: 00000000c0000000 aka 3072M [ 0.027221] node 0 link 0: mmio [a0000, bffff] [ 0.027228] node 0 link 0: mmio [c0000000, efffffff] [ 0.027235] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.027241] node 0 link 0: mmio [f0000000, f0afffff] [ 0.027246] TOM2: 0000000200000000 aka 8192M [ 0.027444] bus: [00,0a] on node 0 link 0 [ 0.027447] bus: 00 index 0 io port: [0, ffff] [ 0.027450] bus: 00 index 1 mmio: [a0000, bffff] [ 0.027453] bus: 00 index 2 mmio: [c0000000, f3ffffff] [ 0.027456] bus: 00 index 3 mmio: [f4000000, ffffffff] [ 0.027459] bus: 00 index 4 mmio: [200000000, fcffffffff] [ 0.027478] ACPI: bus type pci registered [ 0.027694] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.027694] PCI: MCFG area at f0000000 reserved in E820 [ 0.043849] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.043993] PCI: Using configuration type 1 for base access [ 0.061170] bio: create slab at 0 [ 0.065930] ACPI: EC: Look up EC in DSDT [ 0.085947] ACPI: Interpreter enabled [ 0.085986] ACPI: (supports S0 S1 S3 S4 S5) [ 0.085986] ACPI: Using IOAPIC for interrupt routing [ 0.123175] ACPI: No dock devices found. [ 0.123873] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.124433] pci 0000:00:01.1: reg 10 io port: [0xff00-0xff3f] [ 0.124461] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.124470] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.124509] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.124717] pci 0000:00:01.1: PME# disabled [ 0.125094] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff] [ 0.125323] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.125385] pci 0000:00:02.0: supports D1 D2 [ 0.125389] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125594] pci 0000:00:02.0: PME# disabled [ 0.125838] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.125900] pci 0000:00:04.0: supports D1 D2 [ 0.125903] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125980] pci 0000:00:04.0: PME# disabled [ 0.126047] pci 0000:00:06.0: reg 20 io port: [0xfc00-0xfc0f] [ 0.126129] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.126192] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.126396] pci 0000:00:07.0: PME# disabled [ 0.126750] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7] [ 0.126758] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3] [ 0.126767] pci 0000:00:09.0: reg 18 io port: [0x970-0x977] [ 0.126776] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73] [ 0.126785] pci 0000:00:09.0: reg 20 io port: [0xf700-0xf70f] [ 0.126794] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff] [ 0.126908] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.126917] pci 0000:00:0a.0: reg 14 io port: [0xf600-0xf607] [ 0.126926] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfe02a000-0xfe02a0ff] [ 0.126935] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfe029000-0xfe02900f] [ 0.126980] pci 0000:00:0a.0: supports D1 D2 [ 0.126980] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.126980] pci 0000:00:0a.0: PME# disabled [ 0.127073] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.127281] pci 0000:00:0b.0: PME# disabled [ 0.127771] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.127980] pci 0000:00:10.0: PME# disabled [ 0.128256] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128466] pci 0000:00:11.0: PME# disabled [ 0.128980] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128980] pci 0000:00:13.0: PME# disabled [ 0.129256] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129467] pci 0000:00:14.0: PME# disabled [ 0.130060] pci 0000:01:08.0: reg 20 io port: [0xec00-0xec1f] [ 0.130104] pci 0000:01:08.0: supports D1 D2 [ 0.130107] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130312] pci 0000:01:08.0: PME# disabled [ 0.130588] pci 0000:01:08.1: reg 20 io port: [0xe800-0xe81f] [ 0.130631] pci 0000:01:08.1: supports D1 D2 [ 0.130634] pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130840] pci 0000:01:08.1: PME# disabled [ 0.131026] pci 0000:01:08.2: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff] [ 0.131097] pci 0000:01:08.2: supports D1 D2 [ 0.131100] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131307] pci 0000:01:08.2: PME# disabled [ 0.131571] pci 0000:00:08.0: transparent bridge [ 0.131773] pci 0000:00:08.0: bridge io port: [0xe000-0xefff] [ 0.131780] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.131786] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.131839] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.131853] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff] [ 0.131867] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff] [ 0.131876] pci 0000:02:00.0: reg 24 io port: [0xdc00-0xdc7f] [ 0.131885] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.131978] pci 0000:00:0b.0: bridge io port: [0xd000-0xdfff] [ 0.131979] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.131979] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd8000000-0xe7ffffff] [ 0.132031] pci 0000:03:00.0: reg 10 32bit mmio: [0xfdce0000-0xfdcfffff] [ 0.132084] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.132289] pci 0000:03:00.0: PME# disabled [ 0.132589] pci 0000:00:10.0: bridge io port: [0xa000-0xcfff] [ 0.132600] pci 0000:00:10.0: bridge 32bit mmio: [0xfda00000-0xfdcfffff] [ 0.132619] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfd800000-0xfd9fffff] [ 0.132725] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold [ 0.132930] pci 0000:04:01.0: PME# disabled [ 0.133079] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 0.133284] pci 0000:04:02.0: PME# disabled [ 0.133561] pci 0000:03:00.0: bridge io port: [0xa000-0xcfff] [ 0.133568] pci 0000:03:00.0: bridge 32bit mmio: [0xfda00000-0xfdbfffff] [ 0.133578] pci 0000:03:00.0: bridge 64bit mmio pref: [0xfd800000-0xfd9fffff] [ 0.133662] pci 0000:05:00.0: reg 10 64bit mmio: [0xfdbfe000-0xfdbfffff] [ 0.133763] pci 0000:05:00.0: PME# supported from D0 D3hot [ 0.133967] pci 0000:05:00.0: PME# disabled [ 0.134051] pci 0000:04:01.0: bridge io port: [0xc000-0xcfff] [ 0.134058] pci 0000:04:01.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.134068] pci 0000:04:01.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.134133] pci 0000:06:00.0: reg 10 io port: [0xbc00-0xbc07] [ 0.134144] pci 0000:06:00.0: reg 14 io port: [0xb800-0xb803] [ 0.134155] pci 0000:06:00.0: reg 18 io port: [0xb400-0xb407] [ 0.134166] pci 0000:06:00.0: reg 1c io port: [0xb000-0xb003] [ 0.134177] pci 0000:06:00.0: reg 20 io port: [0xac00-0xac0f] [ 0.134188] pci 0000:06:00.0: reg 24 32bit mmio: [0xfdaff000-0xfdaff7ff] [ 0.134199] pci 0000:06:00.0: reg 30 32bit mmio: [0xfdae0000-0xfdaeffff] [ 0.134244] pci 0000:06:00.0: PME# supported from D3hot [ 0.134449] pci 0000:06:00.0: PME# disabled [ 0.134729] pci 0000:04:02.0: bridge io port: [0xa000-0xbfff] [ 0.134736] pci 0000:04:02.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.134746] pci 0000:04:02.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff] [ 0.134874] pci 0000:00:11.0: bridge io port: [0x9000-0x9fff] [ 0.134885] pci 0000:00:11.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff] [ 0.134903] pci 0000:00:11.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff] [ 0.134979] pci 0000:08:00.0: supports D1 D2 [ 0.135064] pci 0000:00:13.0: bridge io port: [0x8000-0x8fff] [ 0.135075] pci 0000:00:13.0: bridge 32bit mmio: [0xfd500000-0xfd5fffff] [ 0.135094] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfd400000-0xfd4fffff] [ 0.135165] pci 0000:09:01.0: reg 10 32bit mmio: [0xfd5ff000-0xfd5fffff] [ 0.135263] pci 0000:09:01.0: supports D1 D2 [ 0.135266] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot [ 0.135472] pci 0000:09:01.0: PME# disabled [ 0.135737] pci 0000:09:01.1: reg 10 32bit mmio: [0xfd5fe000-0xfd5fefff] [ 0.135835] pci 0000:09:01.1: supports D1 D2 [ 0.135838] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot [ 0.135979] pci 0000:09:01.1: PME# disabled [ 0.136040] pci 0000:09:01.2: reg 10 32bit mmio: [0xfd5fd000-0xfd5fd0ff] [ 0.136137] pci 0000:09:01.2: supports D1 D2 [ 0.136140] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot [ 0.136347] pci 0000:09:01.2: PME# disabled [ 0.136661] pci 0000:08:00.0: bridge io port: [0x8000-0x8fff] [ 0.136668] pci 0000:08:00.0: bridge 32bit mmio: [0xfd500000-0xfd5fffff] [ 0.136681] pci 0000:08:00.0: bridge 64bit mmio pref: [0xfd400000-0xfd4fffff] [ 0.136784] pci 0000:0a:00.0: reg 10 32bit mmio: [0xfd3e0000-0xfd3fffff] [ 0.136798] pci 0000:0a:00.0: reg 14 32bit mmio: [0xfd3c0000-0xfd3dffff] [ 0.136812] pci 0000:0a:00.0: reg 18 io port: [0x7c00-0x7c1f] [ 0.136859] pci 0000:0a:00.0: reg 30 32bit mmio: [0xfd3a0000-0xfd3bffff] [ 0.136920] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 0.136979] pci 0000:0a:00.0: PME# disabled [ 0.137064] pci 0000:00:14.0: bridge io port: [0x7000-0x7fff] [ 0.137075] pci 0000:00:14.0: bridge 32bit mmio: [0xfd300000-0xfd3fffff] [ 0.137094] pci 0000:00:14.0: bridge 64bit mmio pref: [0xfd200000-0xfd2fffff] [ 0.137172] pci_bus 0000:00: on NUMA node 0 [ 0.137180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.137940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.328221] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.328951] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329252] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329951] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.329951] ACPI: PCI Interrupt Link [LE0A] (IRQs *5 7 9 10 11 14 15) [ 0.329951] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 *10 11 14 15) [ 0.330062] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 *11 14 15) [ 0.330775] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330951] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330951] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330951] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330951] ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330951] ACPI: PCI Interrupt Link [LE2A] (IRQs *5 7 9 10 11 14 15) [ 0.330951] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 *11 14 15) [ 0.330973] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331910] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 *7 9 10 11 14 15) [ 0.331951] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331951] ACPI: PCI Interrupt Link [LE4A] (IRQs *5 7 9 10 11 14 15) [ 0.332187] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333075] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333951] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334061] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334951] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334951] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334951] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334951] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334951] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15) [ 0.335184] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336074] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.337047] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.337951] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.337951] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.337951] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.337951] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 *7 9 10 11 14 15) [ 0.338186] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.339074] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.339951] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.340269] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.340943] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.340951] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.340951] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.340951] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0 [ 0.340951] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0 [ 0.340951] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0 [ 0.340951] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled. [ 0.340951] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled. [ 0.341132] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled. [ 0.341804] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled. [ 0.341951] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0 [ 0.342146] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0 [ 0.342787] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled. [ 0.343140] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0 [ 0.343783] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled. [ 0.343951] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0 [ 0.343951] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled. [ 0.344186] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled. [ 0.344860] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled. [ 0.344951] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled. [ 0.345135] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled. [ 0.345809] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.345951] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled. [ 0.346166] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled. [ 0.346929] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled. [ 0.346951] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled. [ 0.346951] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.346951] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 [ 0.346951] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.346951] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.346951] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.346951] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.346951] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.347001] sync cpu 0 get result 1 max_id 1 [ 0.347001] sync cpu 1 get result 1 max_id 1 [ 0.347001] alloc irq_desc for 412 on node 0 [ 0.347001] alloc kstat_irqs on node 0 [ 0.347007] xenbus_probe_backend_init bus registered ok [ 0.347183] xenbus_probe_frontend_init bus registered ok [ 0.347183] xen_balloon: Initialising balloon driver with page order 0. [ 0.348077] SCSI subsystem initialized [ 0.348198] libata version 3.00 loaded. [ 0.349023] usbcore: registered new interface driver usbfs [ 0.349189] usbcore: registered new interface driver hub [ 0.349211] usbcore: registered new device driver usb [ 0.350003] PCI: Using ACPI for IRQ routing [ 0.350401] IO APIC resources couldn't be allocated. [ 0.354014] NetLabel: Initializing [ 0.354212] NetLabel: domain hash size = 128 [ 0.354410] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.354626] NetLabel: unlabeled traffic allowed by default [ 0.355962] Switched to high resolution mode on CPU 0 [ 0.356034] Switched to high resolution mode on CPU 1 [ 0.360035] pnp: PnP ACPI init [ 0.360257] ACPI: bus type pnp registered [ 0.362286] xen: registering gsi 8 triggering 1 polarity 0 [ 0.362290] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.362491] xen: --> irq=8 [ 0.362495] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.363312] xen: registering gsi 13 triggering 1 polarity 0 [ 0.363315] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.363516] xen: --> irq=13 [ 0.363520] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.364578] xen: registering gsi 6 triggering 1 polarity 0 [ 0.364582] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.364783] xen: --> irq=6 [ 0.364786] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.365979] xen: registering gsi 4 triggering 1 polarity 0 [ 0.365982] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.366184] xen: --> irq=4 [ 0.366187] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.374718] pnp: PnP ACPI: found 12 devices [ 0.374919] ACPI: ACPI bus type pnp unregistered [ 0.375128] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.375331] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.375533] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.375657] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.375657] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.375657] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.375657] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 0.375657] system 00:01: iomem range 0xb0000000-0xbfffffff has been reserved [ 0.375657] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.375657] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.375657] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.377380] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.377589] system 00:0b: iomem range 0xd3a00-0xd3fff could not be reserved [ 0.377793] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 0.377998] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.378201] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.378367] system 00:0b: iomem range 0xfeff0000-0xfeff00ff has been reserved [ 0.378367] system 00:0b: iomem range 0xafee0000-0xafefffff could not be reserved [ 0.378367] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.378367] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.378367] system 00:0b: iomem range 0x100000-0xafedffff could not be reserved [ 0.378367] system 00:0b: iomem range 0xafff0000-0xbffeffff could not be reserved [ 0.378367] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.378367] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.378367] system 00:0b: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.378367] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.378367] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.378367] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.381406] pciback: wants to seize 0000:00:07.0 [ 0.381410] pciback: wants to seize 0000:01:08.0 [ 0.381414] pciback: wants to seize 0000:01:08.1 [ 0.381418] pciback: wants to seize 0000:01:08.2 [ 0.381422] pciback: wants to seize 0000:09:01.0 [ 0.381425] pciback: wants to seize 0000:09:01.1 [ 0.381429] pciback: wants to seize 0000:09:01.2 [ 0.381432] pciback: wants to seize 0000:05:00.0 [ 0.381444] pciback 0000:00:00.0: probing... [ 0.381456] pciback 0000:00:01.0: probing... [ 0.381466] pciback 0000:00:01.1: probing... [ 0.381475] pciback 0000:00:01.2: probing... [ 0.381485] pciback 0000:00:01.3: probing... [ 0.381494] pciback 0000:00:01.4: probing... [ 0.381503] pciback 0000:00:02.0: probing... [ 0.381513] pciback 0000:00:04.0: probing... [ 0.381522] pciback 0000:00:06.0: probing... [ 0.381532] pciback 0000:00:07.0: probing... [ 0.381535] pciback 0000:00:07.0: seizing device [ 0.381736] pciback 0000:00:07.0: pcistub_device_alloc [ 0.381740] pciback 0000:00:07.0: deferring initialization [ 0.381748] pciback 0000:00:08.0: probing... [ 0.381758] pciback 0000:00:09.0: probing... [ 0.381768] pciback 0000:00:0a.0: probing... [ 0.381777] pciback 0000:00:0b.0: probing... [ 0.381787] pciback 0000:00:10.0: probing... [ 0.381796] pciback 0000:00:11.0: probing... [ 0.381806] pciback 0000:00:13.0: probing... [ 0.381816] pciback 0000:00:14.0: probing... [ 0.381825] pciback 0000:00:18.0: probing... [ 0.381835] pciback 0000:00:18.1: probing... [ 0.381844] pciback 0000:00:18.2: probing... [ 0.381854] pciback 0000:00:18.3: probing... [ 0.381863] pciback 0000:01:08.0: probing... [ 0.381866] pciback 0000:01:08.0: seizing device [ 0.382066] pciback 0000:01:08.0: pcistub_device_alloc [ 0.382069] pciback 0000:01:08.0: deferring initialization [ 0.382096] pciback 0000:01:08.1: probing... [ 0.382099] pciback 0000:01:08.1: seizing device [ 0.382298] pciback 0000:01:08.1: pcistub_device_alloc [ 0.382301] pciback 0000:01:08.1: deferring initialization [ 0.382308] pciback 0000:01:08.2: probing... [ 0.382312] pciback 0000:01:08.2: seizing device [ 0.382510] pciback 0000:01:08.2: pcistub_device_alloc [ 0.382513] pciback 0000:01:08.2: deferring initialization [ 0.382520] pciback 0000:02:00.0: probing... [ 0.382531] pciback 0000:03:00.0: probing... [ 0.382541] pciback 0000:04:01.0: probing... [ 0.382551] pciback 0000:04:02.0: probing... [ 0.382560] pciback 0000:05:00.0: probing... [ 0.382564] pciback 0000:05:00.0: seizing device [ 0.382762] pciback 0000:05:00.0: pcistub_device_alloc [ 0.382766] pciback 0000:05:00.0: deferring initialization [ 0.382773] pciback 0000:06:00.0: probing... [ 0.382784] pciback 0000:08:00.0: probing... [ 0.382794] pciback 0000:09:01.0: probing... [ 0.382797] pciback 0000:09:01.0: seizing device [ 0.382995] pciback 0000:09:01.0: pcistub_device_alloc [ 0.382998] pciback 0000:09:01.0: deferring initialization [ 0.383014] pciback 0000:09:01.1: probing... [ 0.383017] pciback 0000:09:01.1: seizing device [ 0.383216] pciback 0000:09:01.1: pcistub_device_alloc [ 0.383220] pciback 0000:09:01.1: deferring initialization [ 0.383227] pciback 0000:09:01.2: probing... [ 0.383230] pciback 0000:09:01.2: seizing device [ 0.383429] pciback 0000:09:01.2: pcistub_device_alloc [ 0.383432] pciback 0000:09:01.2: deferring initialization [ 0.383439] pciback 0000:0a:00.0: probing... [ 0.388082] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.388471] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.388674] pci 0000:00:08.0: IO window: 0xe000-0xefff [ 0.388879] pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff [ 0.389002] pci 0000:00:08.0: PREFETCH window: 0xfdd00000-0xfddfffff [ 0.389002] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.389002] pci 0000:00:0b.0: IO window: 0xd000-0xdfff [ 0.389002] pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff [ 0.389002] pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff [ 0.389002] pci 0000:04:01.0: PCI bridge, secondary bus 0000:05 [ 0.389002] pci 0000:04:01.0: IO window: 0xc000-0xcfff [ 0.389002] pci 0000:04:01.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.389002] pci 0000:04:01.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.389002] pci 0000:04:02.0: PCI bridge, secondary bus 0000:06 [ 0.389002] pci 0000:04:02.0: IO window: 0xa000-0xbfff [ 0.389002] pci 0000:04:02.0: MEM window: 0xfda00000-0xfdafffff [ 0.389002] pci 0000:04:02.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff [ 0.389002] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04 [ 0.389002] pci 0000:03:00.0: IO window: 0xa000-0xcfff [ 0.389002] pci 0000:03:00.0: MEM window: 0xfda00000-0xfdbfffff [ 0.389002] pci 0000:03:00.0: PREFETCH window: 0x000000fd800000-0x000000fd9fffff [ 0.389002] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.389002] pci 0000:00:10.0: IO window: 0xa000-0xcfff [ 0.389002] pci 0000:00:10.0: MEM window: 0xfda00000-0xfdcfffff [ 0.389002] pci 0000:00:10.0: PREFETCH window: 0x000000fd800000-0x000000fd9fffff [ 0.389002] pci 0000:00:11.0: PCI bridge, secondary bus 0000:07 [ 0.389002] pci 0000:00:11.0: IO window: 0x9000-0x9fff [ 0.389002] pci 0000:00:11.0: MEM window: 0xfd700000-0xfd7fffff [ 0.389002] pci 0000:00:11.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff [ 0.389002] pci 0000:08:00.0: PCI bridge, secondary bus 0000:09 [ 0.389002] pci 0000:08:00.0: IO window: 0x8000-0x8fff [ 0.389002] pci 0000:08:00.0: MEM window: 0xfd500000-0xfd5fffff [ 0.389002] pci 0000:08:00.0: PREFETCH window: 0x000000fd400000-0x000000fd4fffff [ 0.389002] pci 0000:00:13.0: PCI bridge, secondary bus 0000:08 [ 0.389002] pci 0000:00:13.0: IO window: 0x8000-0x8fff [ 0.389002] pci 0000:00:13.0: MEM window: 0xfd500000-0xfd5fffff [ 0.389002] pci 0000:00:13.0: PREFETCH window: 0x000000fd400000-0x000000fd4fffff [ 0.389002] pci 0000:00:14.0: PCI bridge, secondary bus 0000:0a [ 0.389002] pci 0000:00:14.0: IO window: 0x7000-0x7fff [ 0.389002] pci 0000:00:14.0: MEM window: 0xfd300000-0xfd3fffff [ 0.389002] pci 0000:00:14.0: PREFETCH window: 0x000000fd200000-0x000000fd2fffff [ 0.389002] pci 0000:00:08.0: setting latency timer to 64 [ 0.389002] pci 0000:00:0b.0: setting latency timer to 64 [ 0.389002] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16 [ 0.389002] xen: registering gsi 16 triggering 0 polarity 1 [ 0.389002] alloc irq_desc for 16 on node 0 [ 0.389002] alloc kstat_irqs on node 0 [ 0.398863] xen: --> irq=16 [ 0.398867] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399244] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16 [ 0.399619] pci 0000:00:10.0: setting latency timer to 64 [ 0.399633] xen: registering gsi 16 triggering 0 polarity 1 [ 0.399636] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.399836] xen: --> irq=16 [ 0.399839] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399856] pci 0000:03:00.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16 [ 0.399856] pci 0000:03:00.0: setting latency timer to 64 [ 0.399856] ACPI: PCI Interrupt Link [AE0B] enabled at IRQ 16 [ 0.399856] xen: registering gsi 16 triggering 0 polarity 1 [ 0.399856] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.399856] xen: --> irq=16 [ 0.399856] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399856] pci 0000:04:01.0: PCI INT A -> Link[AE0B] -> GSI 16 (level, low) -> IRQ 16 [ 0.399856] pci 0000:04:01.0: setting latency timer to 64 [ 0.399856] ACPI: PCI Interrupt Link [AE0C] enabled at IRQ 16 [ 0.399856] xen: registering gsi 16 triggering 0 polarity 1 [ 0.399856] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.399856] xen: --> irq=16 [ 0.399856] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399856] pci 0000:04:02.0: PCI INT A -> Link[AE0C] -> GSI 16 (level, low) -> IRQ 16 [ 0.399856] pci 0000:04:02.0: setting latency timer to 64 [ 0.399856] ACPI: PCI Interrupt Link [AE1A] enabled at IRQ 16 [ 0.399856] xen: registering gsi 16 triggering 0 polarity 1 [ 0.399856] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.399856] xen: --> irq=16 [ 0.399856] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399856] pci 0000:00:11.0: PCI INT A -> Link[AE1A] -> GSI 16 (level, low) -> IRQ 16 [ 0.399856] pci 0000:00:11.0: setting latency timer to 64 [ 0.399856] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16 [ 0.399856] xen: registering gsi 16 triggering 0 polarity 1 [ 0.399856] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.399856] xen: --> irq=16 [ 0.399856] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399856] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16 [ 0.399856] pci 0000:00:13.0: setting latency timer to 64 [ 0.399856] pci 0000:08:00.0: setting latency timer to 64 [ 0.399856] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16 [ 0.399856] xen: registering gsi 16 triggering 0 polarity 1 [ 0.399856] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.399856] xen: --> irq=16 [ 0.399856] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.399856] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.399856] pci 0000:00:14.0: setting latency timer to 64 [ 0.399856] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.399856] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.399856] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.399856] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.399856] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.399856] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.399856] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.399856] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.399856] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.399856] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff] [ 0.399856] pci_bus 0000:03: resource 0 io: [0xa000-0xcfff] [ 0.399856] pci_bus 0000:03: resource 1 mem: [0xfda00000-0xfdcfffff] [ 0.399856] pci_bus 0000:03: resource 2 pref mem [0xfd800000-0xfd9fffff] [ 0.399856] pci_bus 0000:04: resource 0 io: [0xa000-0xcfff] [ 0.399856] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdbfffff] [ 0.399856] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd9fffff] [ 0.399856] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 0.399856] pci_bus 0000:05: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.399856] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.399856] pci_bus 0000:06: resource 0 io: [0xa000-0xbfff] [ 0.399856] pci_bus 0000:06: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.399856] pci_bus 0000:06: resource 2 pref mem [0xfd800000-0xfd8fffff] [ 0.399856] pci_bus 0000:07: resource 0 io: [0x9000-0x9fff] [ 0.399856] pci_bus 0000:07: resource 1 mem: [0xfd700000-0xfd7fffff] [ 0.399856] pci_bus 0000:07: resource 2 pref mem [0xfd600000-0xfd6fffff] [ 0.399856] pci_bus 0000:08: resource 0 io: [0x8000-0x8fff] [ 0.399856] pci_bus 0000:08: resource 1 mem: [0xfd500000-0xfd5fffff] [ 0.399856] pci_bus 0000:08: resource 2 pref mem [0xfd400000-0xfd4fffff] [ 0.399856] pci_bus 0000:09: resource 0 io: [0x8000-0x8fff] [ 0.399856] pci_bus 0000:09: resource 1 mem: [0xfd500000-0xfd5fffff] [ 0.399856] pci_bus 0000:09: resource 2 pref mem [0xfd400000-0xfd4fffff] [ 0.399856] pci_bus 0000:0a: resource 0 io: [0x7000-0x7fff] [ 0.399856] pci_bus 0000:0a: resource 1 mem: [0xfd300000-0xfd3fffff] [ 0.399856] pci_bus 0000:0a: resource 2 pref mem [0xfd200000-0xfd2fffff] [ 0.415561] NET: Registered protocol family 2 [ 0.415834] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.416417] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.417779] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.418510] TCP: Hash tables configured (established 131072 bind 65536) [ 0.418721] TCP reno registered [ 0.419073] NET: Registered protocol family 1 [ 0.419358] Trying to unpack rootfs image as initramfs... [ 0.427755] Freeing initrd memory: 5929k freed [ 0.433683] Microcode Update Driver: v2.00 , Peter Oruba [ 0.434055] Scanning for low memory corruption every 60 seconds [ 0.434727] audit: initializing netlink socket (disabled) [ 0.434942] type=2000 audit(1271426102.824:1): initialized [ 0.443782] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.449216] VFS: Disk quotas dquot_6.5.2 [ 0.449551] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.451506] fuse init (API version 7.12) [ 0.451986] msgmni has been set to 1353 [ 0.452370] SELinux: Registering netfilter hooks [ 0.453173] alg: No test for stdrng (krng) [ 0.453661] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.454030] io scheduler noop registered [ 0.454227] io scheduler anticipatory registered [ 0.454425] io scheduler deadline registered [ 0.454672] io scheduler cfq registered (default) [ 0.492373] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.492776] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.493194] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.493610] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.494029] pciback 0000:01:08.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.494029] pciback 0000:01:08.0: Performing full reset [ 0.494149] pciback 0000:01:08.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 0.494152] pciback 0000:01:08.1: Performing full reset [ 0.494212] pci 0000:02:00.0: Boot video device [ 0.494851] alloc irq_desc for 411 on node 0 [ 0.494855] alloc kstat_irqs on node 0 [ 0.494952] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 0.495524] alloc irq_desc for 410 on node 0 [ 0.495527] alloc kstat_irqs on node 0 [ 0.495614] pcieport-driver 0000:00:11.0: setting latency timer to 64 [ 0.496195] alloc irq_desc for 409 on node 0 [ 0.496198] alloc kstat_irqs on node 0 [ 0.496293] pcieport-driver 0000:00:13.0: setting latency timer to 64 [ 0.496847] alloc irq_desc for 408 on node 0 [ 0.496850] alloc kstat_irqs on node 0 [ 0.496936] pcieport-driver 0000:00:14.0: setting latency timer to 64 [ 0.497295] alloc irq_desc for 407 on node 0 [ 0.497298] alloc kstat_irqs on node 0 [ 0.497328] pcieport-driver 0000:03:00.0: setting latency timer to 64 [ 0.497671] alloc irq_desc for 406 on node 0 [ 0.497674] alloc kstat_irqs on node 0 [ 0.497704] pcieport-driver 0000:04:01.0: setting latency timer to 64 [ 0.498043] alloc irq_desc for 405 on node 0 [ 0.498046] alloc kstat_irqs on node 0 [ 0.498092] pcieport-driver 0000:04:02.0: setting latency timer to 64 [ 0.498503] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.499351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.499719] ACPI: Power Button [PWRF] [ 0.500086] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.500454] ACPI: Power Button [PWRB] [ 0.500884] fan PNP0C0B:00: registered as cooling_device0 [ 0.501091] ACPI: Fan [FAN] (on) [ 0.514854] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-946 [ 0.515003] ACPI: Expecting a [Reference] package element, found type 0 [ 0.515003] ACPI: Invalid passive threshold [ 0.516420] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.516633] ACPI: Thermal Zone [THRM] (40 C) [ 0.517114] Event-channel device installed. [ 0.523452] blktap_device_init: blktap device major 253 [ 0.523668] blktap_ring_init: blktap ring major: 251 [ 0.525106] registering netback [ 0.525439] pciback: pcistub_init_devices_late [ 0.525443] pciback 0000:09:01.2: initializing... [ 0.525447] pciback 0000:09:01.2: initializing config [ 0.525450] pciback 0000:09:01.2: initializing virtual configuration space [ 0.525454] pciback 0000:09:01.2: added config field at offset 0x00 [ 0.525458] pciback 0000:09:01.2: added config field at offset 0x02 [ 0.525461] pciback 0000:09:01.2: added config field at offset 0x04 [ 0.525465] pciback 0000:09:01.2: added config field at offset 0x3c [ 0.525468] pciback 0000:09:01.2: added config field at offset 0x3d [ 0.525471] pciback 0000:09:01.2: added config field at offset 0x0c [ 0.525475] pciback 0000:09:01.2: added config field at offset 0x0d [ 0.525478] pciback 0000:09:01.2: added config field at offset 0x0f [ 0.525482] pciback 0000:09:01.2: added config field at offset 0x10 [ 0.525486] pciback 0000:09:01.2: added config field at offset 0x14 [ 0.525490] pciback 0000:09:01.2: added config field at offset 0x18 [ 0.525494] pciback 0000:09:01.2: added config field at offset 0x1c [ 0.525497] pciback 0000:09:01.2: added config field at offset 0x20 [ 0.525501] pciback 0000:09:01.2: added config field at offset 0x24 [ 0.525505] pciback 0000:09:01.2: added config field at offset 0x30 [ 0.525529] pciback 0000:09:01.2: Found capability 0x1 at 0x40 [ 0.525533] pciback 0000:09:01.2: added config field at offset 0x40 [ 0.525536] pciback 0000:09:01.2: added config field at offset 0x42 [ 0.525542] pciback 0000:09:01.2: added config field at offset 0x44 [ 0.525546] pciback 0000:09:01.2: added config field at offset 0x46 [ 0.525549] pciback 0000:09:01.2: added config field at offset 0x47 [ 0.525553] pciback 0000:09:01.2: enabling device [ 0.526144] ACPI: PCI Interrupt Link [AE3D] enabled at IRQ 16 [ 0.526347] xen: registering gsi 16 triggering 0 polarity 1 [ 0.526350] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.526551] xen: --> irq=16 [ 0.526554] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.526932] pciback 0000:09:01.2: PCI INT C -> Link[AE3D] -> GSI 16 (level, low) -> IRQ 16 [ 0.527004] pciback 0000:09:01.2: reset device [ 0.527004] pciback 0000:09:01.2: PCI INT C disabled [ 0.527004] pciback 0000:09:01.1: initializing... [ 0.527004] pciback 0000:09:01.1: initializing config [ 0.527004] pciback 0000:09:01.1: initializing virtual configuration space [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x00 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x02 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x04 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x3c [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x3d [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x0c [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x0d [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x0f [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x10 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x14 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x18 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x1c [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x20 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x24 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x30 [ 0.527004] pciback 0000:09:01.1: Found capability 0x1 at 0x40 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x40 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x42 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x44 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x46 [ 0.527004] pciback 0000:09:01.1: added config field at offset 0x47 [ 0.527004] pciback 0000:09:01.1: enabling device [ 0.527004] ACPI: PCI Interrupt Link [AE3C] enabled at IRQ 16 [ 0.527004] xen: registering gsi 16 triggering 0 polarity 1 [ 0.527004] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.527004] xen: --> irq=16 [ 0.527004] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.527004] pciback 0000:09:01.1: PCI INT B -> Link[AE3C] -> GSI 16 (level, low) -> IRQ 16 [ 0.527004] pciback 0000:09:01.1: reset device [ 0.527004] pciback 0000:09:01.1: PCI INT B disabled [ 0.527004] pciback 0000:09:01.0: initializing... [ 0.527004] pciback 0000:09:01.0: initializing config [ 0.527004] pciback 0000:09:01.0: initializing virtual configuration space [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x00 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x02 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x04 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x3c [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x3d [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x0c [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x0d [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x0f [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x10 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x14 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x18 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x1c [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x20 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x24 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x30 [ 0.527004] pciback 0000:09:01.0: Found capability 0x1 at 0x40 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x40 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x42 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x44 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x46 [ 0.527004] pciback 0000:09:01.0: added config field at offset 0x47 [ 0.527004] pciback 0000:09:01.0: enabling device [ 0.527004] ACPI: PCI Interrupt Link [AE3B] enabled at IRQ 16 [ 0.527004] xen: registering gsi 16 triggering 0 polarity 1 [ 0.527004] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.527004] xen: --> irq=16 [ 0.527004] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.527004] pciback 0000:09:01.0: PCI INT A -> Link[AE3B] -> GSI 16 (level, low) -> IRQ 16 [ 0.527004] pciback 0000:09:01.0: reset device [ 0.527004] pciback 0000:09:01.0: PCI INT A disabled [ 0.527004] pciback 0000:05:00.0: initializing... [ 0.527004] pciback 0000:05:00.0: initializing config [ 0.527004] pciback 0000:05:00.0: initializing virtual configuration space [ 0.527004] pciback 0000:05:00.0: added config field at offset 0x00 [ 0.527004] pciback 0000:05:00.0: added config field at offset 0x02 [ 0.527004] pciback 0000:05:00.0: added config field at offset 0x04 [ 0.527004] pciback 0000:05:00.0: added config field at offset 0x3c [ 0.531173] pciback 0000:05:00.0: added config field at offset 0x3d [ 0.531176] pciback 0000:05:00.0: added config field at offset 0x0c [ 0.531180] pciback 0000:05:00.0: added config field at offset 0x0d [ 0.531183] pciback 0000:05:00.0: added config field at offset 0x0f [ 0.531187] pciback 0000:05:00.0: added config field at offset 0x10 [ 0.531190] pciback 0000:05:00.0: added config field at offset 0x14 [ 0.531194] pciback 0000:05:00.0: added config field at offset 0x18 [ 0.531197] pciback 0000:05:00.0: added config field at offset 0x1c [ 0.531201] pciback 0000:05:00.0: added config field at offset 0x20 [ 0.531204] pciback 0000:05:00.0: added config field at offset 0x24 [ 0.531208] pciback 0000:05:00.0: added config field at offset 0x30 [ 0.531240] pciback 0000:05:00.0: Found capability 0x1 at 0x50 [ 0.531243] pciback 0000:05:00.0: added config field at offset 0x50 [ 0.531246] pciback 0000:05:00.0: added config field at offset 0x52 [ 0.531252] pciback 0000:05:00.0: added config field at offset 0x54 [ 0.531255] pciback 0000:05:00.0: added config field at offset 0x56 [ 0.531258] pciback 0000:05:00.0: added config field at offset 0x57 [ 0.531262] pciback 0000:05:00.0: enabling device [ 0.531274] xen: registering gsi 16 triggering 0 polarity 1 [ 0.531277] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.531478] xen: --> irq=16 [ 0.531481] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.531852] pciback 0000:05:00.0: PCI INT A -> Link[AE0B] -> GSI 16 (level, low) -> IRQ 16 [ 0.532163] pciback 0000:05:00.0: reset device [ 0.532163] pciback 0000:05:00.0: PCI INT A disabled [ 0.532163] pciback 0000:01:08.2: initializing... [ 0.532163] pciback 0000:01:08.2: initializing config [ 0.532163] pciback 0000:01:08.2: initializing virtual configuration space [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x00 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x02 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x04 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x3c [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x3d [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x0c [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x0d [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x0f [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x10 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x14 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x18 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x1c [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x20 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x24 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x30 [ 0.532163] pciback 0000:01:08.2: Found capability 0x1 at 0x80 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x80 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x82 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x84 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x86 [ 0.532163] pciback 0000:01:08.2: added config field at offset 0x87 [ 0.532163] pciback 0000:01:08.2: enabling device [ 0.532163] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.532163] xen: registering gsi 18 triggering 0 polarity 1 [ 0.532163] alloc irq_desc for 18 on node 0 [ 0.532163] alloc kstat_irqs on node 0 [ 0.533105] xen: --> irq=18 [ 0.533108] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1 [ 0.533481] pciback 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 0.533847] pciback 0000:01:08.2: reset device [ 0.533856] pciback 0000:01:08.2: PCI INT C disabled [ 0.534058] pciback 0000:01:08.1: initializing... [ 0.534061] pciback 0000:01:08.1: initializing config [ 0.534063] pciback 0000:01:08.1: initializing virtual configuration space [ 0.534066] pciback 0000:01:08.1: added config field at offset 0x00 [ 0.534069] pciback 0000:01:08.1: added config field at offset 0x02 [ 0.534072] pciback 0000:01:08.1: added config field at offset 0x04 [ 0.534075] pciback 0000:01:08.1: added config field at offset 0x3c [ 0.534078] pciback 0000:01:08.1: added config field at offset 0x3d [ 0.534081] pciback 0000:01:08.1: added config field at offset 0x0c [ 0.534084] pciback 0000:01:08.1: added config field at offset 0x0d [ 0.534087] pciback 0000:01:08.1: added config field at offset 0x0f [ 0.534090] pciback 0000:01:08.1: added config field at offset 0x10 [ 0.534093] pciback 0000:01:08.1: added config field at offset 0x14 [ 0.534096] pciback 0000:01:08.1: added config field at offset 0x18 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x1c [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x20 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x24 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x30 [ 0.534099] pciback 0000:01:08.1: Found capability 0x1 at 0x80 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x80 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x82 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x84 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x86 [ 0.534099] pciback 0000:01:08.1: added config field at offset 0x87 [ 0.534099] pciback 0000:01:08.1: enabling device [ 0.534099] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 0.534099] xen: registering gsi 17 triggering 0 polarity 1 [ 0.534099] alloc irq_desc for 17 on node 0 [ 0.534099] alloc kstat_irqs on node 0 [ 0.534726] xen: --> irq=17 [ 0.534729] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1 [ 0.535102] pciback 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 0.535468] pciback 0000:01:08.1: reset device [ 0.535475] pciback 0000:01:08.1: PCI INT B disabled [ 0.535676] pciback 0000:01:08.0: initializing... [ 0.535679] pciback 0000:01:08.0: initializing config [ 0.535681] pciback 0000:01:08.0: initializing virtual configuration space [ 0.535684] pciback 0000:01:08.0: added config field at offset 0x00 [ 0.535687] pciback 0000:01:08.0: added config field at offset 0x02 [ 0.535690] pciback 0000:01:08.0: added config field at offset 0x04 [ 0.535693] pciback 0000:01:08.0: added config field at offset 0x3c [ 0.535696] pciback 0000:01:08.0: added config field at offset 0x3d [ 0.535708] pciback 0000:01:08.0: added config field at offset 0x0c [ 0.535712] pciback 0000:01:08.0: added config field at offset 0x0d [ 0.535715] pciback 0000:01:08.0: added config field at offset 0x0f [ 0.535719] pciback 0000:01:08.0: added config field at offset 0x10 [ 0.535722] pciback 0000:01:08.0: added config field at offset 0x14 [ 0.535726] pciback 0000:01:08.0: added config field at offset 0x18 [ 0.535729] pciback 0000:01:08.0: added config field at offset 0x1c [ 0.535733] pciback 0000:01:08.0: added config field at offset 0x20 [ 0.535736] pciback 0000:01:08.0: added config field at offset 0x24 [ 0.535740] pciback 0000:01:08.0: added config field at offset 0x30 [ 0.535756] pciback 0000:01:08.0: Found capability 0x1 at 0x80 [ 0.535759] pciback 0000:01:08.0: added config field at offset 0x80 [ 0.535763] pciback 0000:01:08.0: added config field at offset 0x82 [ 0.535768] pciback 0000:01:08.0: added config field at offset 0x84 [ 0.535771] pciback 0000:01:08.0: added config field at offset 0x86 [ 0.535774] pciback 0000:01:08.0: added config field at offset 0x87 [ 0.535777] pciback 0000:01:08.0: enabling device [ 0.536298] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 0.536500] xen: registering gsi 16 triggering 0 polarity 1 [ 0.536503] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.536703] xen: --> irq=16 [ 0.536707] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.537003] pciback 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 0.537003] pciback 0000:01:08.0: reset device [ 0.537003] pciback 0000:01:08.0: PCI INT A disabled [ 0.537003] pciback 0000:00:07.0: initializing... [ 0.537003] pciback 0000:00:07.0: initializing config [ 0.537003] pciback 0000:00:07.0: initializing virtual configuration space [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x00 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x02 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x04 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x3c [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x3d [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x0c [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x0d [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x0f [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x10 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x14 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x18 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x1c [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x20 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x24 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x30 [ 0.537003] pciback 0000:00:07.0: Found capability 0x1 at 0x44 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x44 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x46 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x48 [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x4a [ 0.537003] pciback 0000:00:07.0: added config field at offset 0x4b [ 0.537003] pciback 0000:00:07.0: enabling device [ 0.537003] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 0.537003] xen: registering gsi 23 triggering 0 polarity 1 [ 0.537003] alloc irq_desc for 23 on node 0 [ 0.537003] alloc kstat_irqs on node 0 [ 0.538318] xen: --> irq=23 [ 0.538321] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1 [ 0.538694] pciback 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 0.539060] pciback 0000:00:07.0: reset device [ 0.539067] pciback 0000:00:07.0: PCI INT A disabled [ 0.545996] alloc irq_desc for 404 on node 0 [ 0.546000] alloc kstat_irqs on node 0 [ 0.547181] hpet_acpi_add: no address or irqs in _CRS [ 0.547588] Non-volatile memory driver v1.3 [ 0.547902] Linux agpgart interface v0.103 [ 0.548309] [drm] Initialized drm 1.1.0 20060810 [ 0.548585] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.793124] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.794099] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.797978] brd: module loaded [ 0.863256] loop: module loaded [ 0.864026] ahci 0000:00:09.0: version 3.0 [ 0.864601] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 0.864804] xen: registering gsi 22 triggering 0 polarity 1 [ 0.864811] alloc irq_desc for 22 on node 0 [ 0.864814] alloc kstat_irqs on node 0 [ 0.864820] xen: --> irq=22 [ 0.864824] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1 [ 0.865004] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 22 (level, low) -> IRQ 22 [ 0.865004] alloc irq_desc for 403 on node 0 [ 0.865004] alloc kstat_irqs on node 0 [ 0.865803] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.866172] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 0.866377] ahci 0000:00:09.0: setting latency timer to 64 [ 0.867623] scsi0 : ahci [ 0.868101] scsi1 : ahci [ 0.868548] scsi2 : ahci [ 0.868961] scsi3 : ahci [ 0.869380] scsi4 : ahci [ 0.869776] scsi5 : ahci [ 0.870438] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 403 [ 0.870804] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 403 [ 0.871138] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 403 [ 0.871138] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 403 [ 0.871138] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 403 [ 0.871138] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 403 [ 0.872726] xen: registering gsi 16 triggering 0 polarity 1 [ 0.872729] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.872930] xen: --> irq=16 [ 0.872934] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.873313] ahci 0000:06:00.0: PCI INT A -> Link[AE0C] -> GSI 16 (level, low) -> IRQ 16 [ 0.873651] alloc irq_desc for 402 on node 0 [ 0.873651] alloc kstat_irqs on node 0 [ 0.873842] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.874210] ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp pio slum part [ 0.874578] ahci 0000:06:00.0: setting latency timer to 64 [ 0.875069] scsi6 : ahci [ 0.875641] scsi7 : ahci [ 0.876002] ata7: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff100 irq 402 [ 0.876358] ata8: SATA max UDMA/133 abar m2048@0xfdaff000 port 0xfdaff180 irq 402 [ 0.877021] pata_amd 0000:00:06.0: version 0.4.1 [ 0.877084] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.877247] scsi8 : pata_amd [ 0.884929] scsi9 : pata_amd [ 0.886350] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 0.886555] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 0.887230] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 0.887254] Copyright (c) 1999-2006 Intel Corporation. [ 0.887713] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.887915] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.888173] xen: registering gsi 16 triggering 0 polarity 1 [ 0.888176] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.888378] xen: --> irq=16 [ 0.888382] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.888657] e1000e 0000:0a:00.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.888657] e1000e 0000:0a:00.0: setting latency timer to 64 [ 0.888657] alloc irq_desc for 401 on node 0 [ 0.888657] alloc kstat_irqs on node 0 [ 1.042786] 0000:0a:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1b:21:2c:68:fe [ 1.043178] 0000:0a:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.043251] 0000:0a:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50854-003 [ 1.043845] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.044062] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.044492] sky2 driver version 1.23 [ 1.044794] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.045755] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 1.045972] xen: registering gsi 21 triggering 0 polarity 1 [ 1.045978] alloc irq_desc for 21 on node 0 [ 1.045981] alloc kstat_irqs on node 0 [ 1.045987] xen: --> irq=21 [ 1.045990] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1 [ 1.046254] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21 [ 1.046254] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.179019] ata2: SATA link down (SStatus 0 SControl 300) [ 1.180020] ata5: SATA link down (SStatus 0 SControl 300) [ 1.180241] ata6: SATA link down (SStatus 0 SControl 300) [ 1.181026] ata7: SATA link down (SStatus 0 SControl 370) [ 1.187020] ata4: SATA link down (SStatus 0 SControl 300) [ 1.187240] ata3: SATA link down (SStatus 0 SControl 300) [ 1.187472] ata8: SATA link down (SStatus 0 SControl 370) [ 1.330020] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.331488] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 1.331693] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.333294] ata1.00: configured for UDMA/133 [ 1.333637] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 1.334497] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.334568] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.335224] ata10: port disabled. ignoring. [ 1.335301] sd 0:0:0:0: [sda] Write Protect is off [ 1.335502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.335546] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.336213] sda: sda1 sda2 [ 1.344362] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.552561] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x1374 @ 1, addr 00:1f:c6:8c:5e:b2 [ 1.552932] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.553480] tun: Universal TUN/TAP device driver, 1.6 [ 1.553681] tun: (C) 1999-2004 Max Krasnyansky [ 1.554051] console [netcon0] enabled [ 1.554251] netconsole: network logging started [ 1.554724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.554929] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 1.555013] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.555215] ohci_hcd: block sizes: ed 80 td 96 [ 1.555471] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20 [ 1.555471] xen: registering gsi 20 triggering 0 polarity 1 [ 1.555471] alloc irq_desc for 20 on node 0 [ 1.555471] alloc kstat_irqs on node 0 [ 1.555900] xen: --> irq=20 [ 1.555903] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0 pin 20 triggering 1 polarity 1 [ 1.556282] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20 [ 1.556675] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.556680] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.556919] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices' [ 1.556925] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.557048] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 1.557500] ohci_hcd 0000:00:02.0: created debug files [ 1.557503] ohci_hcd 0000:00:02.0: supports USB remote wakeup [ 1.557538] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000 [ 1.610024] ohci_hcd 0000:00:02.0: OHCI controller state [ 1.610028] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers [ 1.610033] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 1.610037] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0 [ 1.610041] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF [ 1.610045] ohci_hcd 0000:00:02.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.610051] ohci_hcd 0000:00:02.0: hcca frame #0003 [ 1.610056] ohci_hcd 0000:00:02.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6) [ 1.610060] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.610064] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE [ 1.610069] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS [ 1.610073] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS [ 1.610078] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS [ 1.610083] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS [ 1.610087] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS [ 1.610092] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS [ 1.610114] usb usb1: default language 0x0409 [ 1.610126] usb usb1: udev 1, busnum 1, minor = 0 [ 1.610129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.610252] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.610252] usb usb1: Product: OHCI Host Controller [ 1.610252] usb usb1: Manufacturer: Linux 2.6.31.13 ohci_hcd [ 1.610252] usb usb1: SerialNumber: 0000:00:02.0 [ 1.611346] usb usb1: uevent [ 1.611426] usb usb1: usb_probe_device [ 1.611430] usb usb1: configuration #1 chosen from 1 choice [ 1.611639] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.611658] usb 1-0:1.0: uevent [ 1.611729] hub 1-0:1.0: usb_probe_interface [ 1.611732] hub 1-0:1.0: usb_probe_interface - got id [ 1.611736] hub 1-0:1.0: USB hub found [ 1.611957] hub 1-0:1.0: 6 ports detected [ 1.612156] hub 1-0:1.0: standalone hub [ 1.612159] hub 1-0:1.0: no power switching (usb 1.0) [ 1.612162] hub 1-0:1.0: global over-current protection [ 1.612165] hub 1-0:1.0: power on to power good time: 2ms [ 1.612173] hub 1-0:1.0: local power source is good [ 1.612176] hub 1-0:1.0: no over-current condition exists [ 1.612180] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.612210] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.612792] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23 [ 1.612994] xen: registering gsi 23 triggering 0 polarity 1 [ 1.612998] xen_allocate_pirq: returning irq 23 for gsi 23 [ 1.613199] xen: --> irq=23 [ 1.613202] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1 [ 1.613253] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23 [ 1.613253] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.613253] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.614181] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 1.614296] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 1.614695] ohci_hcd 0000:00:04.0: created debug files [ 1.614698] ohci_hcd 0000:00:04.0: supports USB remote wakeup [ 1.614728] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfe02d000 [ 1.667025] ohci_hcd 0000:00:04.0: OHCI controller state [ 1.667030] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers [ 1.667034] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 1.667038] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0 [ 1.667042] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF [ 1.667046] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.667052] ohci_hcd 0000:00:04.0: hcca frame #0003 [ 1.667057] ohci_hcd 0000:00:04.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6) [ 1.667061] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.667065] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE [ 1.667070] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS [ 1.667074] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS [ 1.667079] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS [ 1.667083] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS [ 1.667088] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS [ 1.667092] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS [ 1.667112] usb usb2: default language 0x0409 [ 1.667124] usb usb2: udev 1, busnum 2, minor = 128 [ 1.667127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.667252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.667252] usb usb2: Product: OHCI Host Controller [ 1.667252] usb usb2: Manufacturer: Linux 2.6.31.13 ohci_hcd [ 1.667252] usb usb2: SerialNumber: 0000:00:04.0 [ 1.668342] usb usb2: uevent [ 1.668419] usb usb2: usb_probe_device [ 1.668423] usb usb2: configuration #1 chosen from 1 choice [ 1.668631] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.668649] usb 2-0:1.0: uevent [ 1.668720] hub 2-0:1.0: usb_probe_interface [ 1.668724] hub 2-0:1.0: usb_probe_interface - got id [ 1.668727] hub 2-0:1.0: USB hub found [ 1.668946] hub 2-0:1.0: 6 ports detected [ 1.669144] hub 2-0:1.0: standalone hub [ 1.669147] hub 2-0:1.0: no power switching (usb 1.0) [ 1.669150] hub 2-0:1.0: global over-current protection [ 1.669153] hub 2-0:1.0: power on to power good time: 2ms [ 1.669160] hub 2-0:1.0: local power source is good [ 1.669163] hub 2-0:1.0: no over-current condition exists [ 1.669167] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.669194] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 1.669324] uhci_hcd: USB Universal Host Controller Interface driver [ 1.669816] usbcore: registered new interface driver usblp [ 1.670019] Initializing USB Mass Storage driver... [ 1.670310] usbcore: registered new interface driver usb-storage [ 1.670514] USB Mass Storage support registered. [ 1.670793] usbcore: registered new interface driver libusual [ 1.671283] PNP: No PS/2 controller found. Probing ports directly. [ 1.672065] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.672276] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.672638] mice: PS/2 mouse device common for all mice [ 1.673276] rtc_cmos 00:05: RTC can wake from S4 [ 1.673588] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.673850] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 1.675648] applesmc: supported laptop not found! [ 1.675848] applesmc: driver init failed (ret=-19)! [ 1.677548] hdaps: supported laptop not found! [ 1.677749] hdaps: driver init failed (ret=-19)! [ 1.678220] it87: Found IT8716F chip at 0x290, revision 3 [ 1.678432] it87: in3 is VCC (+5V) [ 1.678628] it87: in7 is VCCH (+5V Stand-By) [ 1.678908] ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region IP__ [0x295-0x296] [ 1.679277] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.679734] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 1.680436] lis3lv02d driver loaded. [ 1.681939] pc87360: PC8736x not detected, module not inserted. [ 1.683450] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 1.684340] cpuidle: using governor ladder [ 1.684540] cpuidle: using governor menu [ 1.687168] usbcore: registered new interface driver hiddev [ 1.687451] usbcore: registered new interface driver usbhid [ 1.687654] usbhid: v2.6:USB HID core driver [ 1.688229] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 1.692980] ALSA device list: [ 1.693181] No soundcards found. [ 1.693456] Netfilter messages via NETLINK v0.30. [ 1.693675] nf_conntrack version 0.5.0 (6092 buckets, 24368 max) [ 1.694163] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1.694528] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1.694893] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1.695147] ctnetlink v0.93: registering with nfnetlink. [ 1.695988] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.696233] TCP cubic registered [ 1.696430] Initializing XFRM netlink socket [ 1.697027] NET: Registered protocol family 10 [ 1.698537] IPv6 over IPv4 tunneling driver [ 1.699447] NET: Registered protocol family 17 [ 1.699705] Bridge firewalling registered [ 1.700203] RPC: Registered udp transport module. [ 1.700404] RPC: Registered tcp transport module. [ 1.700923] PM: Resume from disk failed. [ 1.700939] registered taskstats version 1 [ 1.701352] Magic number: 6:458:938 [ 1.701625] block loop94: hash matches [ 1.702070] Freeing unused kernel memory: 560k freed [ 1.702537] Write protecting the kernel read-only data: 8528k [ 1.712304] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.769335] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 2.018915] usb usb1: uevent [ 2.018949] usb 1-0:1.0: uevent [ 2.019095] usb usb2: uevent [ 2.019126] usb 2-0:1.0: uevent [ 2.704271] ohci_hcd 0000:00:02.0: auto-stop root hub [ 2.704285] ohci_hcd 0000:00:04.0: auto-stop root hub [ 4.701024] hub 1-0:1.0: hub_suspend [ 4.701033] usb usb1: bus auto-suspend [ 4.701038] ohci_hcd 0000:00:02.0: suspend root hub [ 4.701044] hub 2-0:1.0: hub_suspend [ 4.701049] usb usb2: bus auto-suspend [ 4.701052] ohci_hcd 0000:00:04.0: suspend root hub [ 17.468882] PM: Starting manual resume from disk [ 17.469010] PM: Resume from partition 252:4 [ 17.469010] PM: Checking hibernation image. [ 17.479206] PM: Resume from disk failed. [ 17.504259] kjournald starting. Commit interval 5 seconds [ 17.504273] EXT3-fs: mounted filesystem with journal data mode. [ 18.578452] udevd version 125 started [ 18.770093] usb usb1: uevent [ 18.770130] usb 1-0:1.0: uevent [ 18.770224] usb usb2: uevent [ 18.770255] usb 2-0:1.0: uevent [ 19.388570] ata1.00: configured for UDMA/133 [ 19.388953] ata1: EH complete [ 21.542289] ata1.00: configured for UDMA/133 [ 21.542494] ata1: EH complete [ 21.878240] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 21.882981] EXT3 FS on dm-1, internal journal [ 23.750379] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k [ 24.997749] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 25.067566] alloc irq_desc for 400 on node 0 [ 25.067571] alloc kstat_irqs on node 0 [ 26.568003] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 26.568004] 0000:0a:00.0: eth1: 10/100 speed: disabling TSO [ 26.568819] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 26.763748] eth1: IPv6 duplicate address detected! [ 35.232258] xen_bridge: no IPv6 routers present [ 35.404258] eth0: no IPv6 routers present [ 36.117265] vpn_bridge: no IPv6 routers present [ 39.184831] FW: New not syn:IN=eth0 OUT= MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=207.46.124.105 DST=88.159.69.34 LEN=41 TOS=0x00 PREC=0x00 TTL=110 ID=20791 DF PROTO=TCP SPT=1863 DPT=51927 WINDOW=65430 RES=0x00 ACK URGP=0 [ 39.399509] kjournald starting. Commit interval 5 seconds [ 39.407800] EXT3 FS on dm-5, internal journal [ 39.408036] EXT3-fs: mounted filesystem with writeback data mode. [ 39.892762] kjournald starting. Commit interval 5 seconds [ 39.898977] EXT3 FS on dm-6, internal journal [ 39.899212] EXT3-fs: mounted filesystem with writeback data mode. [ 40.168797] FW: New not syn:IN=eth0 OUT= MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=207.46.124.105 DST=88.159.69.34 LEN=41 TOS=0x00 PREC=0x00 TTL=110 ID=26079 DF PROTO=TCP SPT=1863 DPT=51927 WINDOW=65430 RES=0x00 ACK URGP=0 [ 40.311645] kjournald starting. Commit interval 5 seconds [ 40.322641] EXT3 FS on dm-7, internal journal [ 40.322875] EXT3-fs: mounted filesystem with writeback data mode. [ 40.643916] kjournald starting. Commit interval 5 seconds [ 40.651272] EXT3 FS on dm-8, internal journal [ 40.651506] EXT3-fs: mounted filesystem with writeback data mode. [ 40.914335] kjournald starting. Commit interval 5 seconds [ 40.925605] EXT3 FS on dm-9, internal journal [ 40.925840] EXT3-fs: mounted filesystem with writeback data mode. [ 41.262642] FW: New not syn:IN=eth0 OUT= MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=207.46.124.105 DST=88.159.69.34 LEN=41 TOS=0x00 PREC=0x00 TTL=110 ID=30980 DF PROTO=TCP SPT=1863 DPT=51927 WINDOW=65430 RES=0x00 ACK URGP=0 [ 41.327579] kjournald starting. Commit interval 5 seconds [ 41.333926] EXT3 FS on dm-12, internal journal [ 41.334162] EXT3-fs: mounted filesystem with writeback data mode. [ 41.739786] kjournald starting. Commit interval 5 seconds [ 41.752537] EXT3 FS on dm-10, internal journal [ 41.752771] EXT3-fs: mounted filesystem with writeback data mode. [ 42.356355] FW: New not syn:IN=eth0 OUT= MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=207.46.124.105 DST=88.159.69.34 LEN=41 TOS=0x00 PREC=0x00 TTL=110 ID=3510 DF PROTO=TCP SPT=1863 DPT=51927 WINDOW=65430 RES=0x00 ACK URGP=0 [ 43.449746] FW: New not syn:IN=eth0 OUT= MAC=00:1f:c6:8c:5e:b2:00:08:ae:10:46:60:08:00 SRC=207.46.124.105 DST=88.159.69.34 LEN=41 TOS=0x00 PREC=0x00 TTL=110 ID=9075 DF PROTO=TCP SPT=1863 DPT=51927 WINDOW=65430 RES=0x00 ACK URGP=0 [ 44.003517] alloc irq_desc for 399 on node 0 [ 44.003521] alloc kstat_irqs on node 0 [ 44.003579] xenbus_probe wake_waiting [ 44.003799] xenbus_probe wake_waiting [ 44.004952] alloc irq_desc for 398 on node 0 [ 44.004955] alloc kstat_irqs on node 0 [ 44.008674] XENBUS: Unable to read cpu state [ 44.009045] XENBUS: Unable to read cpu state [ 44.009606] xenbus_probe_devices backend [ 44.009940] xenbus_probe_devices failed xenbus_directory [ 44.010006] backend_probe_and_watch devices probed ok [ 44.010491] backend_probe_and_watch watch add ok ok [ 44.010693] backend_probe_and_watch all done [ 44.010891] xenbus_probe_devices device [ 44.011241] xenbus_probe_devices failed xenbus_directory [ 44.011446] frontend_probe_and_watch devices probed ok [ 44.011798] frontend_probe_and_watch watch add ok ok [ 44.011999] frontend_probe_and_watch all done [ 47.254604] xend[6678] general protection ip:7fb1fee83010 sp:433528d8 error:0 in libc-2.7.so[7fb1fee08000+14a000] [ 48.655418] xend[6743] general protection ip:7fb1fee83010 sp:43e788d8 error:0 in libc-2.7.so[7fb1fee08000+14a000] [ 50.072068] xend[6808] general protection ip:7fb1fee83010 sp:444f18d8 error:0 in libc-2.7.so[7fb1fee08000+14a000] [ 51.490593] xend[6873] general protection ip:7fb1fee83010 sp:43fb28d8 error:0 in libc-2.7.so[7fb1fee08000+14a000] [ 52.864337] xend[6938] general protection ip:7fb1fee83010 sp:43fa48d8 error:0 in libc-2.7.so[7fb1fee08000+14a000] [ 108.163698] FW: BLOCKED IGMP: IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:08:ae:04:2e:43:08:00 SRC=88.159.81.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=18126 PROTO=2