WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

答复: [Xen-devel] Linux DomU halted very early afterbootedwithVT-ddevice

To: "'Zhang, Xiantao'" <xiantao.zhang@xxxxxxxxx>, "'Han, Weidong'" <weidong.han@xxxxxxxxx>
Subject: 答复: [Xen-devel] Linux DomU halted very early afterbootedwithVT-ddevice
From: 沈启龙 <shen.qilong@xxxxxxxxxxxx>
Date: Mon, 21 Dec 2009 17:08:52 +0800
Cc: "'Jiang, Yunhong'" <yunhong.jiang@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx, 'Konrad Rzeszutek Wilk' <konrad.wilk@xxxxxxxxxx>
Delivery-date: Mon, 21 Dec 2009 01:09:24 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <EB8593BCECAB3D40A8248BE0B6400A382FAB2F46@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <000001ca7a41$fc802580$2705a8c0@freecloud><20091211151008.GC19662@xxxxxxxxxxxxxxxxxxx><001801ca7c5f$33f4d0a0$2705a8c0@freecloud><C8EDE645B81E5141A8C6B2F73FD9265105AC73072A@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx><001701ca7d59$34a154b0$2705a8c0@freecloud><60E426D47DE8EA47AA104E65008A100D05AE7ED663@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx><EB8593BCECAB3D40A8248BE0B6400A382FAB2BF2@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx><000001ca81db$eab7b790$2705a8c0@freecloud><60E426D47DE8EA47AA104E65008A100D05CD54608E@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx><000b01ca81e8$e37d0ea0$2705a8c0@freecloud><EB8593BCECAB3D40A8248BE0B6400A382FAB2E72@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx><001101ca81ec$b733ca10$2705a8c0@freecloud> <4B2EED7F.2040300@xxxxxxxxx> <EB8593BCECAB3D40A8248BE0B6400A382FAB2F46@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcqB7vOSK7LBPH4MS5KdpTondf30ZQACJnYQAAkOMCA=
Xen version in my system is 3.4.0, now I'm trying to update it to 3.4.2.

When I run the command xm pci-list-a ,I can find the BDF which I wanted.

I assign net cards together using pci=['02:00.0-1'] in hvm config file, the
vm can run normally, but I can't find any pci info in xenstore list. Then I
using pci=['02:00.0', '02:00.1'], the linux domu also halted very early.

And I try to hot add this device after creating the VM, it worked correctly,
but I can find the pci device form output of command 'lspci' in guest OS.

Best Regards
shenql
-----邮件原件-----
发件人: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] 代表 Zhang, Xiantao
发送时间: 2009年12月21日 12:43
收件人: Han, Weidong; 沈启龙
抄送: Jiang, Yunhong; xen-devel@xxxxxxxxxxxxxxxxxxx; 'Konrad Rzeszutek Wilk'
主题: RE: 答复: [Xen-devel] Linux DomU halted very early
afterbootedwithVT-ddevice

Could you try to hot-add this device after creating the VM successfully, but
anyway as Weidong pointed, you have to ensure the device can be seen through
"xm pci-list-a" before the hot-plug.
Xiantao

Han, Weidong wrote:
> 沈启龙 wrote:
>> The guest's log without vt-d device assignment as following:
>>
>> Linux version 2.6.18-128.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc
>> version
>> 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 10:41:14 EST
>> 2009 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb
>> console=ttyS0, 115200, 8n1 BIOS-provided physical RAM map:
>>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>>  BIOS-e820: 0000000000100000 - 0000000040000000 (usable)
>>  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
>> DMI 2.4 present.
>> No NUMA configuration found
>> Faking a node at 0000000000000000-0000000040000000
>> Bootmem setup node 0 0000000000000000-0000000040000000
>> Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>> disabling kdump
>> ACPI: PM-Timer IO Port: 0x1f48
>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> Processor #0 7:10 APIC version 20
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
>> Setting APIC routing to physical flat
>> Using ACPI (MADT) for SMP configuration information
>> Nosave address range: 000000000009f000 - 00000000000a0000
>> Nosave address range: 00000000000a0000 - 00000000000e0000
>> Nosave address range: 00000000000e0000 - 0000000000100000
>> Allocating PCI resources starting at 50000000 (gap:
>> 40000000:bc000000)
>> SMP: Allowing 1 CPUs, 0 hotplug CPUs
>> Built 1 zonelists.  Total pages: 257201
>> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb
>> console=ttyS0, 115200, 8n1 Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Checking aperture...
>> Memory: 1023668k/1048576k available (2494k kernel code, 24520k
>> reserved, 1263k data, 200k init) Calibrating delay using timer
>> specific routine.. 3994.53 BogoMIPS (lpj=1997268) Security Framework
>> v1.0.0 initialized
>> SELinux:  Initializing.
>> selinux_register_security:  Registering secondary module capability
>> Capability LSM initialized as secondary
>> Mount-cache hash table entries: 256
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2 cache: 256K
>> CPU: L3 cache: 4096K
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 0
>> SMP alternatives: switching to UP code
>> Freeing SMP alternatives: 32k freed
>> ACPI: Core revision 20060707
>> activating NMI Watchdog ... done.
>> Using local APIC timer interrupts.
>> result 6250187
>> Detected 6.250 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... <4>WARNING: CPU#0: NMI appears to be stuck
>> (0->0)! time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>> time.c: Detected 1995.064 MHz processor.
>> checking if image is initramfs... it is
>> Freeing initrd memory: 3229k freed
>> NET: Registered protocol family 16
>> No dock devices found.
>> ACPI: bus type pci registered
>> PCI: Using configuration type 1
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI quirk: region 1f40-1f7f claimed by PIIX4 ACPI
>> ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> pnp: PnP ACPI: found 12 devices
>> usbcore: registered new driver usbfs
>> usbcore: registered new driver hub
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq".  If it helps,
>> post a report NetLabel: Initializing
>> NetLabel:  domain hash size = 128
>> NetLabel:  protocols = UNLABELED CIPSOv4
>> NetLabel:  unlabeled traffic allowed by default
>> PCI-GART: No AMD northbridge found.
>> pnp: 00:02: ioport range 0x10c0-0x10e1 has been reserved
>> pnp: 00:02: ioport range 0xb044-0xb047 has been reserved
>> PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> audit: initializing netlink socket (disabled)
>> type=2000 audit(1261395690.009:1): initialized
>> Total HugeTLB memory allocated, 0
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Initializing Cryptographic API
>> alg: No test for crc32c (crc32c-generic)
>> ksign: Installing public key data
>> Loading keyring
>> - Added public key 75ED35FE9471DC0E
>> - User ID: CentOS (Kernel Module GPG key)
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> Limiting direct PCI/PCI transfers.
>> PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
>> Activating ISA DMA hang workarounds.
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> Real Time Clock Driver v1.12ac
>> Non-volatile memory driver v1.2
>> Linux agpgart interface v0.101 (c) Dave Jones
>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
>> enabled l8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096
>> blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx PIIX3: IDE controller at PCI slot 0000:00:01.1
>> PIIX3: chipset revision 0
>> PIIX3: not 100% native mode: will probe irqs later
>>     ide0: BM-DMA at 0xc100-0xc107, BIOS settings: hda:pio, hdb:pio
>>     ide1: BM-DMA at 0xc108-0xc10f, BIOS settings: hdc:pio, hdd:pio
>> hda: QEMU HARDDISK, ATA DISK drive
>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>> hda: max request size: 512KiB
>> hda: 20480000 sectors (10485 MB) w/256KiB Cache, CHS=16383/255/63,
>>  (U)DMA hda: cache flushes supported hda: hda1 hda2
>> ide-floppy driver 0.99.newide
>> usbcore: registered new driver hiddev
>> usbcore: registered new driver usbhid
>> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq
>> 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>> md: bitmap version 4.39
>> TCP bic registered
>> Initializing IPsec netlink socket
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> ACPI: (supports S3 S4 S5)
>> Freeing unused kernel memory: 200k freed
>> Write protecting the kernel read-only data: 482k
>> Red Hat nash version 5.1.19.6 starting
>> Mounting proc filesystem
>> Mounting sysfs filesystem
>> Creating /dev
>> Creating initial device nodes
>> Setting up hotplug.
>> input: AT Translated Set 2 keyboard as /class/input/input0
>> input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
>> Creating block device nodes.
>> Loading ehci-hcd.ko module
>> Loading ohci-hcd.ko module
>> Loading uhci-hcd.ko module
>> USB Universal Host Controller Interface driver v3.0
>> Loading jbd.ko module
>> Loading ext3.ko module
>> Loading scsi_mod.ko module
>> SCSI subsystem initialized
>> Loading sd_mod.ko module
>> Loading libata.ko module
>> Loading ata_piix.ko module
>> Loading dm-mod.ko module
>> device-mapper: uevent: version 1.0.3
>> device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised:
>> dm-devel@xxxxxxxxxx Loading dm-log.ko module
>> Loading dm-mirror.ko module
>> Loading dm-zero.ko module
>> Loading dm-snapshot.ko module
>> Loading dm-mem-cache.ko module
>> Loading dm-region_hash.ko module
>> Loading dm-message.ko module
>> Loading dm-raid45.ko module
>> device-mapper: dm-raid45: initialized v0.2429
>> Waiting for driver initialization.
>> Scanning and configuring dmraid supported devices
>> Scanning logical volumes
>>   Reading all physical volumes.  This may take a while...
>>   Found volume group "VolGroup00" using metadata type lvm2
>> Activating logical volumes
>>   2 logical volume(s) in volume group "VolGroup00" now active
>> Trying to resume from /dev/VolGroup00/LogVol01
>> No suspend signature on swap, not resuming.
>> Creating root device.
>> Mounting root filesystem.
>> kjournald starting.  Commit interval 5 seconds
>> EXT3-fs: mounted filesystem with ordered data mode.
>> Setting up other filesystems.
>> Setting up new root fs
>> no fstab.sys, mounting internal defaults
>> Switching to new root and running init.
>> unmounting old /dev
>> unmounting old /proc
>> unmounting old /sys
>> type=1404 audit(1261395715.680:2): enforcing=1 old_enforcing=0
>> auid=4294967295 ses=4294967295
>> type=1403 audit(1261395715.973:3): policy loaded auid=4294967295
>> ses=4294967295 INIT: version 2.86 booting
>>                 Welcome to  CentOS release 5.3 (Final)
>>                 Press 'I' to enter interactive startup.
>> Setting clock  (utc): Mon Dec 21 06:41:59 EST 2009 [  OK  ]
>> Starting udev: [  OK  ]
>> Loading default keymap (us): [  OK  ]
>> Setting hostname localhost.localdomain:  [  OK  ]
>> Setting up Logical Volume Management:   2 logical volume(s) in
>> volume group "VolGroup00" now active [  OK  ]
>> Checking filesystems
>> Checking all file systems.
>> [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00
>> /dev/VolGroup00/LogVol00: clean, 100174/1893120 files,
>> 766467/1892352 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a
>> /dev/hda1 /boot: clean, 34/26104 files, 15723/104388 blocks
>> [  OK  ]
>> Remounting root filesystem in read-write mode:  [  OK  ]
>> Mounting local filesystems:  [  OK  ]
>> Enabling local filesystem quotas:  [  OK  ]
>> Enabling /etc/fstab swaps:  [  OK  ]
>> INIT: Entering runlevel: 5
>> Entering non-interactive startup
>> Applying Intel CPU microcode update: [  OK  ]
>> Starting monitoring for VG VolGroup00:   2 logical volume(s) in
>> volume group "VolGroup00" monitored [  OK  ]
>> Starting background readahead: [  OK  ]
>> Checking for hardware changes [  OK  ]
>> Starting mcstransd: [  OK  ]
>> Bringing up loopback interface:  [  OK  ]
>> Starting auditd: [  OK  ]
>> Starting restorecond: [  OK  ]
>> Starting system logger: [  OK  ]
>> Starting kernel logger: [  OK  ]
>> Starting irqbalance: [  OK  ]
>> Starting portmap: [  OK  ]
>> Starting NFS statd: [  OK  ]
>> Starting RPC idmapd: [  OK  ]
>> Starting system message bus: [  OK  ]
>> [  OK  ] Bluetooth services:[  OK  ]
>> Mounting other filesystems:  [  OK  ]
>> Starting PC/SC smart card daemon (pcscd): [  OK  ]
>> Starting hidd: [  OK  ]
>> Starting autofs:  Loading autofs4: [  OK  ]
>> Starting automount: [  OK  ]
>> [  OK  ]
>> Starting acpi daemon: [  OK  ]
>> Starting hpiod: [  OK  ]
>> Starting hpssd: [  OK  ]
>> Starting sshd: [  OK  ]
>> Starting cups: [  OK  ]
>> Starting sendmail: [  OK  ]
>> Starting sm-client: [  OK  ]
>> Starting console mouse services: [  OK  ]
>> Starting crond: [  OK  ]
>> Starting xfs: [  OK  ]
>> Starting anacron: [  OK  ]
>> Starting atd: [  OK  ]
>> Starting background readahead: [  OK  ]
>> Starting yum-updatesd: [  OK  ]
>> Starting Avahi daemon... [  OK  ]
>> Starting HAL daemon: [  OK  ]
>> Starting smartd: [  OK  ]
>>
>> CentOS release 5.3 (Final)
>> Kernel 2.6.18-128.el5 on an x86_64
>>
>> localhost.localdomain login: mtrr: type mismatch for f0000000,100000
>> old: uncachable new: write-combining
>> mtrr: type mismatch for f0000000,400000 old: uncachable new:
>> write-combining
>>
>>
>> The assigned device is a net card, its BDF is 02:00.01.
>> If I only put the card into pciback driver, I run the command xm
>> pci-list-assignable-devices, nothing showed out.
>> But if I also put the card with BDF 02:00:00 into the pciback
>> driver, then I run the command xm pci-list-assignable-devices, I can
>> find what I want, there are info of two cards.
>>
> Make sure you can see the device in output of "xm
> pci-list-assignable-devices", otherwise the device cannot be assigned.
>
> It's multi-function deivce. I guess the function 1 (02.00.1) depends
> on function0 (02.00.0). Pls try assign them together using
> pci=['02:00.0-1'] in hvm config file. BTW, which xen version are you
> using?
>
> Regards,
> Weidong
>
>> -----邮件原件-----
>> 发件人: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] 代表 Zhang, Xiantao
>> 发送时间: 2009年12月21日 10:58
>> 收件人: 沈启龙; Han, Weidong; Jiang, Yunhong; 'Konrad Rzeszutek Wilk'
>> 抄送: xen-devel@xxxxxxxxxxxxxxxxxxx
>> 主题: RE: [Xen-devel] Linux DomU halted very early
>> afterbootedwithVT-ddevice
>>
>> Could you paste the guest's log without vt-d devcie assignment ?
>> In you mail, you said: "And I use the command xm
>> pci-list-assignable-devices, nothing show."
>> So when to run the command ? Before creating the vm or after ?
>> Xiantao
>>
>>
>> 沈启龙 wrote:
>>
>>> I had created a vm without device assignment with VT-d, and it
>>> could run normally.
>>>
>>> Regards,
>>> shenqilong
>>>
>>> -----邮件原件-----
>>> 发件人: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>>> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] 代表 Han, Weidong
>>> 发送时间: 2009年12月21日 10:25
>>> 收件人: 沈启龙; Zhang, Xiantao; Jiang, Yunhong; 'Konrad Rzeszutek Wilk'
>>> 抄送: xen-devel@xxxxxxxxxxxxxxxxxxx
>>> 主题: RE: [Xen-devel] Linux DomU halted very early after
>>> bootedwithVT-ddevice
>>>
>>> Did you try to create the guest without device assignment with VT-d?
>>>
>>> Regards,
>>> Weidong
>>>
>>> -----Original Message-----
>>> From: 沈启龙 [mailto:shen.qilong@xxxxxxxxxxxx]
>>> Sent: Monday, December 21, 2009 9:21 AM
>>> To: Zhang, Xiantao; Han, Weidong; Jiang, Yunhong; 'Konrad Rzeszutek
>>> Wilk' Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
>>> Subject: 答复: [Xen-devel] Linux DomU halted very early after booted
>>> withVT-ddevice
>>>
>>> Thank you for you method, I get the domU's dump message as
>>> following:
>>>
>>> Linux version 2.6.18-128.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc
>>> version
>>> 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 10:41:14 EST
>>> 2009 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb
>>> console=ttyS0, 11520, 8n1 BIOS-provided physical RAM map:
>>>
>>>
>>>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>>>  BIOS-e820: 0000000000100000 - 0000000040000000 (usable)
>>>  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved) DMI 2.4
>>> present. No NUMA configuration found
>>> Faking a node at 0000000000000000-0000000040000000 Bootmem setup
>>> node 0 0000000000000000-0000000040000000 Memory for crash kernel
>>> (0x0 to 0x0) notwithin permissible range disabling kdump
>>> ACPI: PM-Timer IO Port: 0x1f48
>>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0
>>> 7:10 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000]
>>> gsi_base[0])
>>> IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level) Setting
>>> APIC routing to physical flat Using ACPI (MADT) for SMP
>>> configuration information Nosave address range: 000000000009f000 -
>>> 00000000000a0000 Nosave address range: 00000000000a0000 -
>>> 00000000000e0000 Nosave address range: 00000000000e0000 -
>>> 0000000000100000 Allocating PCI resources starting at 50000000
>>> (gap: 40000000:bc000000)
>>> SMP: Allowing 1 CPUs, 0 hotplug CPUs
>>> Built 1 zonelists.  Total pages: 257201
>>> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb
>>> console=ttyS0, 11520, 8n1 Initializing CPU#0 PID hash table
>>> entries: 4096 (order: 12, 32768 bytes) Console: colour VGA+ 80x25
>>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>>> Checking aperture... Memory: 1023668k/1048576k available (2494k
>>> kernel code, 24520k reserved, 1263k data, 200k init) Calibrating
>>> delay using timer specific routine.. 3994.81 BogoMIPS (lpj=1997409)
>>> Security Framework v1.0.0 initialized SELinux:  Initializing.
>>> selinux_register_security:  Registering secondary module capability
>>> Capability LSM initialized as secondary Mount-cache hash table
>>> entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K
>>> CPU: L2 cache: 256K
>>> CPU: L3 cache: 4096K
>>> CPU: Physical Processor ID: 0
>>> CPU: Processor Core ID: 0
>>> SMP alternatives: switching to UP code
>>> Freeing SMP alternatives: 32k freed
>>> ACPI: Core revision 20060707
>>> activating NMI Watchdog ... done.
>>> Using local APIC timer interrupts.
>>> result 6250115
>>> Detected 6.250 MHz APIC timer.
>>> Brought up 1 CPUs
>>> testing NMI watchdog ... <4>WARNING: CPU#0: NMI appears to be stuck
>>> (0->0)! time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>>> time.c: Detected 1995.040 MHz processor.
>>> checking if image is initramfs... it is
>>> Freeing initrd memory: 3229k freed
>>> NET: Registered protocol family 16
>>> No dock devices found.
>>> ACPI: bus type pci registered
>>> PCI: Using configuration type 1
>>> ACPI: Interpreter enabled
>>> ACPI: Using IOAPIC for interrupt routing
>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>> PCI quirk: region 1f40-1f7f claimed by PIIX4 ACPI
>>> ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>>> ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11) Linux Plug and Play
>>> Support v0.97 (c) Adam Belay pnp: PnP ACPI init
>>> pnp: PnP ACPI: found 12 devices
>>> usbcore: registered new driver usbfs
>>> usbcore: registered new driver hub
>>> PCI: Using ACPI for IRQ routing
>>> PCI: If a device doesn't work, try "pci=routeirq".  If it helps,
>>> post a report NetLabel: Initializing
>>> NetLabel:  domain hash size = 128
>>> NetLabel:  protocols = UNLABELED CIPSOv4
>>> NetLabel:  unlabeled traffic allowed by default
>>> PCI-GART: No AMD northbridge found.
>>> pnp: 00:02: ioport range 0x10c0-0x10e1 has been reserved
>>> pnp: 00:02: ioport range 0xb044-0xb047 has been reserved
>>> PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>>> NET: Registered protocol family 2
>>>
>>> The the vm hang!!
>>>
>>> And I used the option pci=routeirq as kernel parameter, but the
>>> output is the same.
>>>
>>> And I use the command xm pci-list-assignable-devices, nothing show.
>>> cat /sys/bus/pci/driver/pciback/slots, I can find the pci device
>>> what I needed. But if I use cat
>>> /sys/bus/pci/driver/pciback/permissive, nothing is showed out.
>>>
>>> Best Regards
>>> shenqilong
>>>
>>> -----邮件原件-----
>>> 发件人: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>>> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] 代表 Zhang, Xiantao
>>> 发送时间: 2009年12月18日 23:56 收件人: Han, Weidong; 沈启龙; Jiang,
Yunhong;
>>> 'Konrad Rzeszutek Wilk'
>>> 抄送: xen-devel@xxxxxxxxxxxxxxxxxxx
>>> 主题: RE: [Xen-devel] Linux DomU halted very early after booted
>>> withVT-ddevice
>>>
>>> Another mothod is to add "console=ttyS0, 115200, 8n1" to guest's
>>> kernel cmdline in domU's grub and use "xm con $hvm-dom-id" in dom0's
>>> terminal at the same time. Then guest's kernel output should
>>> redirect to the dom0's terminal.  And once you see the kernel
>>> output, maybe you can paste it here, and it should help to identify
>>> this issue. Xiantao
>>>
>>>
>>> Han, Weidong wrote:
>>>
>>>> Can you create CentOS guest without device assignment? If so, you
>>>> can log in and remove "quiet" in grub.
>>>>
>>>> Regards,
>>>> Weidong
>>>>
>>>> -----Original Message-----
>>>> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>>>> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 沈启龙
>>>> Sent: Tuesday, December 15, 2009 3:36 PM
>>>> To: Jiang, Yunhong; 'Konrad Rzeszutek Wilk'
>>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
>>>> Subject: 答复: [Xen-devel] Linux DomU halted very early after booted
>>>> withVT-d device
>>>>
>>>> I don't add "quiet" option in domU kernel parameter, and the Linux
>>>> domU is not completely booted. So I can't log in to dump kernel
>>>> message.
>>>>
>>>> Now I find some other information.
>>>> I have "iommu=1 loglvl=all guest_loglvl=all " in my dom0 kernel
>>>> parameter?
>>>>
>>>> When I boot centos DumU, I can get the following logger.
>>>>
>>>> (XEN) [VT-D]iommu.c:1357:d32767 domain_context_unmap:PCIe: bdf =
>>>> 2:0.1 (XEN) [VT-D]iommu.c:1245:d32767 domain_context_mapping:PCIe:
>>>> bdf = 2:0.1 (XEN) [VT-D]iommu.c:1357:d0 domain_context_unmap:PCIe:
>>>> bdf = 2:0.1 (XEN) [VT-D]iommu.c:1245:d0
>>>> domain_context_mapping:PCIe: bdf = 2:0.1 (XEN) [VT-D]io.c:251:d0
>>>> VT-d irq bind: m_irq = ff device = 3 intx = 0 (XEN) HVM2: HVM
>>>> Loader (XEN) HVM2: Detected Xen v3.4-091208
>>>> (XEN) HVM2: CPU speed is 1995 MHz
>>>> (XEN) irq.c:243: Dom2 PCI link 0 changed 0 -> 5
>>>> (XEN) HVM2: PCI-ISA link 0 routed to IRQ5
>>>> (XEN) irq.c:243: Dom2 PCI link 1 changed 0 -> 10
>>>> (XEN) HVM2: PCI-ISA link 1 routed to IRQ10
>>>> (XEN) irq.c:243: Dom2 PCI link 2 changed 0 -> 11
>>>> (XEN) HVM2: PCI-ISA link 2 routed to IRQ11
>>>> (XEN) irq.c:243: Dom2 PCI link 3 changed 0 -> 5
>>>> (XEN) HVM2: PCI-ISA link 3 routed to IRQ5
>>>> (XEN) HVM2: pci dev 01:3 INTA->IRQ10
>>>> (XEN) HVM2: pci dev 03:0 INTA->IRQ5
>>>> (XEN) HVM2: pci dev 04:0 INTA->IRQ5
>>>> (XEN) HVM2: pci dev 02:0 bar 10 size 02000000: f0000008
>>>> (XEN) HVM2: pci dev 03:0 bar 10 size 02000000: f2000004
>>>> (XEN) domctl.c:835:d0 memory_map:add: gfn=f2000 mfn=dc000
>>>> nr_mfns=2000 (XEN) domctl.c:845:d0 memory_map:remove: gfn=f200c
>>>> mfn=dc00c nr_mfns=1 (XEN) HVM2: pci dev 04:0 bar 14 size 01000000:
>>>> f4000008 (XEN) HVM2: pci dev 02:0 bar 14 size 00001000: f5000000
>>>> (XEN) HVM2: pci dev 04:0 bar 10 size 00000100: 0000c001
>>>> (XEN) HVM2: pci dev 01:1 bar 20 size 00000010: 0000c101
>>>> (XEN) HVM2: Multiprocessor initialisation:
>>>> (XEN) HVM2:  - CPU0 ... 40-bit phys ... fixed MTRRs ... var MTRRs
>>>> [2/8] ... done. (XEN) HVM2: Writing SMBIOS tables ...
>>>> (XEN) HVM2: Loading ROMBIOS ...
>>>> (XEN) HVM2: 10300 bytes of ROMBIOS high-memory extensions:
>>>> (XEN) HVM2:   Relocating to 0xfc000000-0xfc00283c ... done
>>>> (XEN) HVM2: Creating MP tables ...
>>>> (XEN) HVM2: Loading Cirrus VGABIOS ...
>>>> (XEN) HVM2: Loading ACPI ...
>>>> (XEN) HVM2:  - Lo data: 000ea020-000ea04f
>>>> (XEN) HVM2:  - Hi data: fc002c00-fc00609f
>>>> (XEN) HVM2: vm86 TSS at fc006400
>>>> (XEN) HVM2: BIOS map:
>>>> (XEN) HVM2:  c0000-c8fff: VGA BIOS
>>>> (XEN) HVM2:  eb000-eb14a: SMBIOS tables
>>>> (XEN) HVM2:  f0000-fffff: Main BIOS
>>>> (XEN) HVM2: Invoking ROMBIOS ...
>>>> (XEN) HVM2: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
>>>> (XEN) stdvga.c:147:d2 entering stdvga and caching modes
>>>> (XEN) HVM2: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12
>>>> vruppert Exp $ (XEN) HVM2: Bochs BIOS - build: 06/23/99
>>>> (XEN) HVM2: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $
>>>> (XEN) HVM2: Options: apmbios pcibios eltorito PMM
>>>> (XEN) HVM2:
>>>> (XEN) HVM2: ata0-0: PCHS=16383/16/63 translation=lba
>>>> LCHS=1024/255/63 (XEN) HVM2: ata0 master: QEMU HARDDISK ATA-7
>>>> Hard-Disk (10000 MBytes) (XEN) HVM2: IDE time out (XEN) HVM2:
>>>> (XEN) HVM2:
>>>> (XEN) HVM2:
>>>> (XEN) HVM2: Press F12 for boot menu.
>>>> (XEN) HVM2:
>>>> (XEN) HVM2: Booting from Hard Disk...
>>>> (XEN) HVM2: Booting from 0000:7c00
>>>> (XEN) HVM2: int13_harddisk: function 41, unmapped device for
>>>> ELDL=81 (XEN) HVM2: int13_harddisk: function 08, unmapped device
>>>> for ELDL=81 (XEN) HVM2: *** int 15h function AX=00c0, BX=0000 not
>>>> yet supported! (XEN) HVM2: int13_harddisk: function 15, unmapped
>>>> device for ELDL=81 (XEN) HVM2: *** int 15h function AX=ec00,
>>>> BX=0002 not yet supported! (XEN) HVM2: KBD: unsupported int 16h
>>>> function 03 (XEN) HVM2: int13_harddisk: function 15, unmapped
>>>> device for ELDL=81 (XEN) HVM2: int13_harddisk: function 02,
>>>> unmapped device for ELDL=81 (XEN) HVM2: int13_harddisk: function
>>>> 41, unmapped device for ELDL=81 (XEN) domctl.c:835:d0
>>>> memory_map:add: gfn=f200c mfn=dc00c nr_mfns=1 (XEN)
>>>> domctl.c:845:d0 memory_map:remove: gfn=f2000 mfn=dc000
>>>> nr_mfns=2000 (XEN) domctl.c:835:d0 memory_map:add: gfn=fe000
>>>> mfn=dc000 nr_mfns=2000 (XEN) domctl.c:845:d0 memory_map:remove:
>>>> gfn=fe00c mfn=dc00c nr_mfns=1 (XEN) domctl.c:835:d0
>>>> memory_map:add: gfn=fe00c mfn=dc00c nr_mfns=1 (XEN)
>>>> domctl.c:845:d0 memory_map:remove: gfn=fe000 mfn=dc000
>>>> nr_mfns=2000 (XEN) domctl.c:835:d0 memory_map:add: gfn=f2000
>>>> mfn=dc000 nr_mfns=2000 (XEN) domctl.c:845:d0 memory_map:remove:
>>>> gfn=f200c mfn=dc00c nr_mfns=1 (XEN) irq.c:243: Dom2 PCI link 0
>>>> changed 5 -> 0 (XEN) irq.c:243: Dom2 PCI link 1 changed 10 -> 0
>>>> (XEN) irq.c:243: Dom2 PCI link 2 changed 11 -> 0 (XEN) irq.c:243:
>>>> Dom2 PCI link 3 changed 5 -> 0
>>>>
>>>> And I use command xm debug-key V (dump iommu info)
>>>>
>>>> (XEN) iommu 0: nr_pt_levels = 4.
>>>> (XEN)   Queued Invalidation: supported and enabled.
>>>> (XEN)   Interrupt Remapping: not supported.
>>>>
>>>> I think Interrupt Remapping is enable by default, does that mean
>>>> that the system don't support vtd completely.
>>>>
>>>> -----邮件原件-----
>>>> 发件人: Jiang, Yunhong [mailto:yunhong.jiang@xxxxxxxxx]
>>>> 发送时间: 2009年12月15日 9:58
>>>> 收件人: 沈启龙; 'Konrad Rzeszutek Wilk'
>>>> 抄送: xen-devel@xxxxxxxxxxxxxxxxxxx
>>>> 主题: RE: [Xen-devel] Linux DomU halted very early after booted
>>>> withVT-d device
>>>>
>>>> You have "quiet" in you kernel parameter?
>>>>
>>>> --jyh
>>>>
>>>>
>>>>> -----Original Message-----
>>>>> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>>>>> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 沈启龙
>>>>> Sent: Monday, December 14, 2009 9:46 AM
>>>>> To: 'Konrad Rzeszutek Wilk'
>>>>> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
>>>>> Subject: 答复: [Xen-devel] Linux DomU halted very early after
>>>>> booted withVT-d device
>>>>>
>>>>> For example
>>>>> DomU system is CentOS.
>>>>> There is nearly no any out from kernel.
>>>>> After grub configure info, the only output info is a logger as
>>>>> following. Memory for crash kernel (0x0 to 0x0) notwithin
>>>>> permissible range. Then the system halted.
>>>>>
>>>>> If I don't use vtd option, the following information is "PCI:
>>>>> PIIX3: Enabling Passive Release on 0000:00:01:0"
>>>>>
>>>>> -----邮件原件-----
>>>>> 发件人: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>>>>> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] 代表 Konrad Rzeszutek
>>>>> Wilk 发送时间: 2009年12月11日 23:10 收件人: 沈启龙
>>>>> 抄送: xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
>>>>> 主题: Re: [Xen-devel] Linux DomU halted very early after booted
>>>>> withVT-d device
>>>>>
>>>>> On Fri, Dec 11, 2009 at 05:11:55PM +0800, 沈启龙 wrote:
>>>>>
>>>>>> My windows2k3 server domU can run normally. I can sign into the
>>>>>> system and find the vt-d
>>>>>>
>>>>>> device, the device is not driverd, but the system can recognize
>>>>>> it.
>>>>>>
>>>>>> However other linux domU can't start normally, it halt very
>>>>>> early after booted.
>>>>>>
>>>>> Can you give me the kernel output of the domU?
>>>>>
>>>>> _______________________________________________
>>>>> Xen-devel mailing list
>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Xen-devel mailing list
>>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@xxxxxxxxxxxxxxxxxxx
>>>> http://lists.xensource.com/xen-devel



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel