I've attached the boot logs for a normal boot and a xen boot.
Patrick
Jeremy Fitzhardinge wrote:
On 07/01/09 00:32, Patrick Colp wrote:
Hmmm, OK. Well, something is still going wrong. I find that adding
things like irqpoll and/or acpi=noirq seems to help a bit. By that I
mean that it gets further into the boot process before stalling. If I
wait a while and press random keys/buttons (like Num Lock or the power
button), then that seems to coax it into booting a little bit more,
but I've never managed to get it to completely boot. The furthest I
got was to where it tries to read the root filesystem.
I could give you a dump of the boot-up messages, but aside from the
ioapic stuff, there's nothing out of the ordinary.
Well, it suggests something is going wrong with interrupt routing. It
would be useful to get a full boot log for the kernel running both
native and as dom0 for comparison purposes.
J
Jul 2 08:46:09 zumbi kernel: Inspecting /boot/System.map-2.6.30-rc6-tip
Jul 2 08:46:09 zumbi kernel: Cannot find map file.
Jul 2 08:46:09 zumbi kernel: Loaded 52141 symbols from 1 module.
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Initializing cgroup subsys cpuset
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Initializing cgroup subsys cpu
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Linux version 2.6.30-rc6-tip
(t_patrickco@waitaha) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #5 SMP Fri
Jun 26 16:33:19 BST 2009
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Command line: root=/dev/sda1 ro
console=ttyS0 console=tty0
Jul 2 08:46:09 zumbi kernel: [ 0.000000] KERNEL supported cpus:
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Intel GenuineIntel
Jul 2 08:46:09 zumbi kernel: [ 0.000000] AMD AuthenticAMD
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Centaur CentaurHauls
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-provided physical RAM map:
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 0000000000000000 -
000000000009ec00 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000000009ec00 -
00000000000a0000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 0000000000100000 -
000000009cf88000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009cf88000 -
000000009d106000 (ACPI NVS)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009d106000 -
000000009f6bd000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009f6bd000 -
000000009f6bf000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009f6bf000 -
000000009f714000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009f714000 -
000000009f7bf000 (ACPI NVS)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009f7bf000 -
000000009f7e1000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009f7e1000 -
000000009f7ff000 (ACPI data)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009f7ff000 -
000000009f800000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 000000009f800000 -
00000000b0000000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 00000000fc000000 -
00000000fd000000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 -
0000000100000000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] BIOS-e820: 0000000100000000 -
0000000160000000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMI 2.5 present.
Jul 2 08:46:09 zumbi kernel: [ 0.000000] last_pfn = 0x160000 max_arch_pfn =
0x400000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] MTRR default type: uncachable
Jul 2 08:46:09 zumbi kernel: [ 0.000000] MTRR fixed ranges enabled:
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 00000-9FFFF write-back
Jul 2 08:46:09 zumbi kernel: [ 0.000000] A0000-BFFFF uncachable
Jul 2 08:46:09 zumbi kernel: [ 0.000000] C0000-DFFFF write-protect
Jul 2 08:46:09 zumbi kernel: [ 0.000000] E0000-FFFFF uncachable
Jul 2 08:46:09 zumbi kernel: [ 0.000000] MTRR variable ranges enabled:
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0 base 000000000 mask F80000000
write-back
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 1 base 080000000 mask FE0000000
write-back
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 2 base 100000000 mask F00000000
write-back
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 3 disabled
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 4 disabled
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 5 disabled
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 6 disabled
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 7 disabled
Jul 2 08:46:09 zumbi kernel: [ 0.000000] x86 PAT enabled: cpu 0, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 0.000000] e820 update range:
00000000a0000000 - 0000000100000000 (usable) ==> (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] last_pfn = 0x9f800 max_arch_pfn =
0x400000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] e820 update range:
0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Scanning 1 areas for low memory
corruption
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified physical RAM map:
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 0000000000000000 -
0000000000001000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 0000000000001000 -
0000000000006000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 0000000000006000 -
000000000009ec00 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000000009ec00 -
00000000000a0000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 00000000000e0000 -
0000000000100000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 0000000000100000 -
000000009cf88000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009cf88000 -
000000009d106000 (ACPI NVS)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009d106000 -
000000009f6bd000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009f6bd000 -
000000009f6bf000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009f6bf000 -
000000009f714000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009f714000 -
000000009f7bf000 (ACPI NVS)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009f7bf000 -
000000009f7e1000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009f7e1000 -
000000009f7ff000 (ACPI data)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009f7ff000 -
000000009f800000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 000000009f800000 -
00000000b0000000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 00000000fc000000 -
00000000fd000000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 00000000ffe00000 -
0000000100000000 (reserved)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] modified: 0000000100000000 -
0000000160000000 (usable)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] initial memory mapped : 0 -
20000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] init_memory_mapping:
0000000000000000-000000009f800000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0000000000 - 009f800000 page 2M
Jul 2 08:46:09 zumbi kernel: [ 0.000000] kernel direct mapping tables up to
9f800000 @ 8000-c000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] init_memory_mapping:
0000000100000000-0000000160000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0100000000 - 0160000000 page 2M
Jul 2 08:46:09 zumbi kernel: [ 0.000000] kernel direct mapping tables up to
160000000 @ a000-11000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] RAMDISK: 37c85000 - 37fef7b4
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: RSDP 00000000000fe020 00024
(v02 INTEL )
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: XSDT 000000009f7fe120 0006C
(v01 INTEL DX58SO 00000493 01000013)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: FACP 000000009f7fd000 000F4
(v03 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI Warning (tbfadt-0562):
Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0
[20090320]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI Warning (tbfadt-0612):
Invalid length for Pm2ControlBlock: 0, using default 8 [20090320]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: DSDT 000000009f7f8000 043A2
(v02 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: FACS 000000009f727000 00040
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: APIC 000000009f7f7000 00138
(v02 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: WDDT 000000009f7f6000 00040
(v01 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: MCFG 000000009f7f5000 0003C
(v01 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: ASF! 000000009f7f4000 000AC
(v32 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: SSDT 000000009f7e3000 0E134
(v01 INTEL SSDT PM 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: DMAR 000000009f7e1000 00110
(v01 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: WDTT 000000009f7f2000 00164
(v01 INTEL DX58SO 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: ASPT 000000009f7f3000 00034
(v04 INTEL PerfTune 00000493 MSFT 0100000D)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] (8 early reservations) ==> bootmem
[0000000000 - 0160000000]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #0 [0000000000 - 0000001000]
BIOS data page ==> [0000000000 - 0000001000]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #1 [0000006000 - 0000008000]
TRAMPOLINE ==> [0000006000 - 0000008000]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #2 [0001000000 - 0001a42e08]
TEXT DATA BSS ==> [0001000000 - 0001a42e08]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #3 [0037c85000 - 0037fef7b4]
RAMDISK ==> [0037c85000 - 0037fef7b4]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #4 [000009ec00 - 0000100000]
BIOS reserved ==> [000009ec00 - 0000100000]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #5 [0001a43000 - 0001a430bc]
BRK ==> [0001a43000 - 0001a430bc]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #6 [0000008000 - 000000a000]
PGTABLE ==> [0000008000 - 000000a000]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] #7 [000000a000 - 000000c000]
PGTABLE ==> [000000a000 - 000000c000]
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Zone PFN ranges:
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Normal 0x00100000 -> 0x00160000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Movable zone start PFN for each
node
Jul 2 08:46:09 zumbi kernel: [ 0.000000] early_node_map[8] active PFN ranges
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x00000000 -> 0x00000001
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x00000006 -> 0x0000009e
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x00000100 -> 0x0009cf88
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x0009d106 -> 0x0009f6bd
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x0009f6bf -> 0x0009f714
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x0009f7bf -> 0x0009f7e1
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x0009f7ff -> 0x0009f800
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 0: 0x00100000 -> 0x00160000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] On node 0 totalpages: 1045840
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMA zone: 56 pages used for
memmap
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMA zone: 104 pages reserved
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMA zone: 3833 pages, LIFO
batch:0
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMA32 zone: 14280 pages used for
memmap
Jul 2 08:46:09 zumbi kernel: [ 0.000000] DMA32 zone: 634351 pages, LIFO
batch:31
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Normal zone: 5376 pages used for
memmap
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Normal zone: 387840 pages, LIFO
batch:31
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x10] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x02] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x12] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x04] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05]
lapic_id[0x14] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06]
lapic_id[0x06] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07]
lapic_id[0x16] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08]
lapic_id[0x01] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x09]
lapic_id[0x11] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0a]
lapic_id[0x03] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0b]
lapic_id[0x13] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0c]
lapic_id[0x05] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0d]
lapic_id[0x15] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0e]
lapic_id[0x07] enabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x0f]
lapic_id[0x17] disabled)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f]
high level lint[0x1])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: IOAPIC (id[0x08]
address[0xfec00000] gsi_base[0])
Jul 2 08:46:09 zumbi kernel: [ 0.000000] IOAPIC[0]: apic_id 8, version 0,
address 0xfec00000, GSI 0-23
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 high level)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: IRQ0 used by override.
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: IRQ2 used by override.
Jul 2 08:46:09 zumbi kernel: [ 0.000000] ACPI: IRQ9 used by override.
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Using ACPI (MADT) for SMP
configuration information
Jul 2 08:46:09 zumbi kernel: [ 0.000000] 16 Processors exceeds NR_CPUS
limit of 8
Jul 2 08:46:09 zumbi kernel: [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug
CPUs
Jul 2 08:46:09 zumbi kernel: [ 0.000000] nr_irqs_gsi: 24
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
0000000000001000 - 0000000000006000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
000000000009e000 - 000000000009f000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
000000000009f000 - 00000000000a0000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
00000000000a0000 - 00000000000e0000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
00000000000e0000 - 0000000000100000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
000000009cf88000 - 000000009d106000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
000000009f6bd000 - 000000009f6bf000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
000000009f714000 - 000000009f7bf000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
000000009f7e1000 - 000000009f7ff000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
000000009f800000 - 00000000b0000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
00000000b0000000 - 00000000fc000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
00000000fc000000 - 00000000fd000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
00000000fd000000 - 00000000ffe00000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PM: Registered nosave memory:
00000000ffe00000 - 0000000100000000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Allocating PCI resources starting
at b0000000 (gap: b0000000:4c000000)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8
nr_cpu_ids:8 nr_node_ids:1
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PERCPU: Embedded 28 pages at
ffff880028028000, static data 83616 bytes
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Built 1 zonelists in Zone order,
mobility grouping on. Total pages: 1026024
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Kernel command line:
root=/dev/sda1 ro console=ttyS0 console=tty0
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Initializing CPU#0
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Experimental hierarchical RCU
implementation.
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Experimental hierarchical RCU init
done.
Jul 2 08:46:09 zumbi kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:472
Jul 2 08:46:09 zumbi kernel: [ 0.000000] PID hash table entries: 4096
(order: 12, 32768 bytes)
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Extended CMOS year: 2000
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Fast TSC calibration using PIT
Jul 2 08:46:09 zumbi kernel: [ 0.000000] Detected 2933.153 MHz processor.
Jul 2 08:46:09 zumbi kernel: [ 37.014472] Console: colour VGA+ 80x25
Jul 2 08:46:09 zumbi kernel: [ 37.014474] console [tty0] enabled
Jul 2 08:46:09 zumbi kernel: [ 37.057894] console [ttyS0] enabled
Jul 2 08:46:09 zumbi kernel: [ 37.148247] Dentry cache hash table entries:
524288 (order: 10, 4194304 bytes)
Jul 2 08:46:09 zumbi kernel: [ 37.149715] Inode-cache hash table entries:
262144 (order: 9, 2097152 bytes)
Jul 2 08:46:09 zumbi kernel: [ 37.150722] Checking aperture...
Jul 2 08:46:09 zumbi kernel: [ 37.156716] No AGP bridge found
Jul 2 08:46:09 zumbi kernel: [ 37.157134] PCI-DMA: Using software bounce
buffering for IO (SWIOTLB)
Jul 2 08:46:09 zumbi kernel: [ 37.162788] Placing 64MB software IO TLB
between ffff880020000000 - ffff880024000000
Jul 2 08:46:09 zumbi kernel: [ 37.163567] software IO TLB at phys 0x20000000
- 0x24000000
Jul 2 08:46:09 zumbi kernel: [ 37.188407] Memory: 4037788k/5767168k
available (5383k kernel code, 1583808k absent, 144664k reserved, 3284k data,
504k init)
Jul 2 08:46:09 zumbi kernel: [ 37.194646] SLUB: Genslabs=13, HWalign=64,
Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Jul 2 08:46:09 zumbi kernel: [ 37.195448] Calibrating delay loop (skipped),
value calculated using timer frequency.. 5866.30 BogoMIPS (lpj=2933153)
Jul 2 08:46:09 zumbi kernel: [ 37.196390] Security Framework initialized
Jul 2 08:46:09 zumbi kernel: [ 37.196819] SELinux: Initializing.
Jul 2 08:46:09 zumbi kernel: [ 37.197220] SELinux: Starting in permissive
mode
Jul 2 08:46:09 zumbi kernel: [ 37.197225] Mount-cache hash table entries: 256
Jul 2 08:46:09 zumbi kernel: [ 37.197754] Initializing cgroup subsys ns
Jul 2 08:46:09 zumbi kernel: [ 37.198173] Initializing cgroup subsys cpuacct
Jul 2 08:46:09 zumbi kernel: [ 37.198613] Initializing cgroup subsys freezer
Jul 2 08:46:09 zumbi kernel: [ 37.199054] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.199475] CPU: Processor Core ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.199879] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.200366] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.200755] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.201143] [ds] using Core i7 configuration
Jul 2 08:46:09 zumbi kernel: [ 37.201575] [ds] sizes: address: 64 bit,
bts/pebs record: 24/176 bytes
Jul 2 08:46:09 zumbi kernel: [ 37.202139] using mwait in idle threads.
Jul 2 08:46:09 zumbi kernel: [ 37.202558] Intel Performance Monitoring
support detected.
Jul 2 08:46:09 zumbi kernel: [ 37.203029] ... version: 3
Jul 2 08:46:09 zumbi kernel: [ 37.203422] ... bit width: 48
Jul 2 08:46:09 zumbi kernel: [ 37.203823] ... num counters: 4
Jul 2 08:46:09 zumbi kernel: [ 37.204215] ... value mask:
0000ffffffffffff
Jul 2 08:46:09 zumbi kernel: [ 37.204664] ... max period:
000000007fffffff
Jul 2 08:46:09 zumbi kernel: [ 37.205107] ... fixed counters: 3
Jul 2 08:46:09 zumbi kernel: [ 37.205506] ... counter mask:
000000070000000f
Jul 2 08:46:09 zumbi kernel: [ 37.206614] ACPI: Core revision 20090320
Jul 2 08:46:09 zumbi kernel: [ 37.219094] Setting APIC routing to flat
Jul 2 08:46:09 zumbi kernel: [ 37.236000] ..TIMER: vector=0x30 apic1=0
pin1=2 apic2=-1 pin2=-1
Jul 2 08:46:09 zumbi kernel: [ 37.246560] CPU0: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.348447] Booting processor 1 APIC 0x2 ip
0x6000
Jul 2 08:46:09 zumbi kernel: [ 37.359376] Initializing CPU#1
Jul 2 08:46:09 zumbi kernel: [ 37.419344] Calibrating delay using timer
specific routine.. 5865.05 BogoMIPS (lpj=2932529)
Jul 2 08:46:09 zumbi kernel: [ 37.419350] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.419351] CPU: Processor Core ID: 1
Jul 2 08:46:09 zumbi kernel: [ 37.419353] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.419354] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.419355] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.419948] x86 PAT enabled: cpu 1, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 37.420557] CPU1: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.425453] Skipping synchronization checks as
TSC is reliable.
Jul 2 08:46:09 zumbi kernel: [ 37.426059] Booting processor 2 APIC 0x4 ip
0x6000
Jul 2 08:46:09 zumbi kernel: [ 37.436878] Initializing CPU#2
Jul 2 08:46:09 zumbi kernel: [ 37.497302] Calibrating delay using timer
specific routine.. 5865.06 BogoMIPS (lpj=2932530)
Jul 2 08:46:09 zumbi kernel: [ 37.497308] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.497309] CPU: Processor Core ID: 2
Jul 2 08:46:09 zumbi kernel: [ 37.497311] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.497312] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.497313] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.497908] x86 PAT enabled: cpu 2, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 37.498467] CPU2: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.503364] Skipping synchronization checks as
TSC is reliable.
Jul 2 08:46:09 zumbi kernel: [ 37.503970] Booting processor 3 APIC 0x6 ip
0x6000
Jul 2 08:46:09 zumbi kernel: [ 37.514789] Initializing CPU#3
Jul 2 08:46:09 zumbi kernel: [ 37.575260] Calibrating delay using timer
specific routine.. 5865.06 BogoMIPS (lpj=2932530)
Jul 2 08:46:09 zumbi kernel: [ 37.575266] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.575267] CPU: Processor Core ID: 3
Jul 2 08:46:09 zumbi kernel: [ 37.575268] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.575270] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.575270] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.575865] x86 PAT enabled: cpu 3, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 37.576479] CPU3: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.581380] Skipping synchronization checks as
TSC is reliable.
Jul 2 08:46:09 zumbi kernel: [ 37.581992] Booting processor 4 APIC 0x1 ip
0x6000
Jul 2 08:46:09 zumbi kernel: [ 37.592812] Initializing CPU#4
Jul 2 08:46:09 zumbi kernel: [ 37.653218] Calibrating delay using timer
specific routine.. 5865.05 BogoMIPS (lpj=2932529)
Jul 2 08:46:09 zumbi kernel: [ 37.653225] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.653226] CPU: Processor Core ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.653228] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.653230] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.653231] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.653966] x86 PAT enabled: cpu 4, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 37.654796] CPU4: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.659698] Skipping synchronization checks as
TSC is reliable.
Jul 2 08:46:09 zumbi kernel: [ 37.660309] Booting processor 5 APIC 0x3 ip
0x6000
Jul 2 08:46:09 zumbi kernel: [ 37.671128] Initializing CPU#5
Jul 2 08:46:09 zumbi kernel: [ 37.731176] Calibrating delay using timer
specific routine.. 5865.05 BogoMIPS (lpj=2932528)
Jul 2 08:46:09 zumbi kernel: [ 37.731181] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.731182] CPU: Processor Core ID: 1
Jul 2 08:46:09 zumbi kernel: [ 37.731184] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.731185] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.731186] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.731973] x86 PAT enabled: cpu 5, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 37.732821] CPU5: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.737722] Skipping synchronization checks as
TSC is reliable.
Jul 2 08:46:09 zumbi kernel: [ 37.738333] Booting processor 6 APIC 0x5 ip
0x6000
Jul 2 08:46:09 zumbi kernel: [ 37.749151] Initializing CPU#6
Jul 2 08:46:09 zumbi kernel: [ 37.809134] Calibrating delay using timer
specific routine.. 5865.05 BogoMIPS (lpj=2932529)
Jul 2 08:46:09 zumbi kernel: [ 37.809139] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.809140] CPU: Processor Core ID: 2
Jul 2 08:46:09 zumbi kernel: [ 37.809142] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.809143] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.809144] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.809927] x86 PAT enabled: cpu 6, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 37.810713] CPU6: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.815608] Skipping synchronization checks as
TSC is reliable.
Jul 2 08:46:09 zumbi kernel: [ 37.816220] Booting processor 7 APIC 0x7 ip
0x6000
Jul 2 08:46:09 zumbi kernel: [ 37.827040] Initializing CPU#7
Jul 2 08:46:09 zumbi kernel: [ 37.887092] Calibrating delay using timer
specific routine.. 5865.06 BogoMIPS (lpj=2932530)
Jul 2 08:46:09 zumbi kernel: [ 37.887097] CPU: Physical Processor ID: 0
Jul 2 08:46:09 zumbi kernel: [ 37.887098] CPU: Processor Core ID: 3
Jul 2 08:46:09 zumbi kernel: [ 37.887100] CPU: L1 I cache: 32K, L1 D cache:
32K
Jul 2 08:46:09 zumbi kernel: [ 37.887101] CPU: L2 cache: 256K
Jul 2 08:46:09 zumbi kernel: [ 37.887102] CPU: L3 cache: 8192K
Jul 2 08:46:09 zumbi kernel: [ 37.887885] x86 PAT enabled: cpu 7, old
0x7040600070406, new 0x7010600070106
Jul 2 08:46:09 zumbi kernel: [ 37.888737] CPU7: Genuine Intel(R) CPU
@ 0000 @ 2.93GHz stepping 02
Jul 2 08:46:09 zumbi kernel: [ 37.893639] Skipping synchronization checks as
TSC is reliable.
Jul 2 08:46:09 zumbi kernel: [ 37.894206] Brought up 8 CPUs
Jul 2 08:46:09 zumbi kernel: [ 37.894620] Total of 8 processors activated
(46921.71 BogoMIPS).
Jul 2 08:46:09 zumbi kernel: [ 37.895416] khelper used greatest stack depth:
6024 bytes left
Jul 2 08:46:09 zumbi kernel: [ 37.895481] net_namespace: 1832 bytes
Jul 2 08:46:09 zumbi kernel: [ 37.896434] Booting paravirtualized kernel on
bare hardware
Jul 2 08:46:09 zumbi kernel: [ 37.897077] Time: 7:45:49 Date: 07/02/09
Jul 2 08:46:09 zumbi kernel: [ 37.897579] NET: Registered protocol family 16
Jul 2 08:46:09 zumbi kernel: [ 37.898153] err -19 in xenbus_probe_init
Jul 2 08:46:09 zumbi kernel: [ 37.898729] ACPI: bus type pci registered
Jul 2 08:46:09 zumbi kernel: [ 37.899270] PCI: MCFG configuration 0: base
a0000000 segment 0 buses 0 - 255
Jul 2 08:46:09 zumbi kernel: [ 37.899885] PCI: MCFG area at a0000000
reserved in E820
Jul 2 08:46:09 zumbi kernel: [ 37.907726] PCI: Using MMCONFIG at a0000000 -
afffffff
Jul 2 08:46:09 zumbi kernel: [ 37.908249] PCI: Using configuration type 1
for base access
Jul 2 08:46:09 zumbi kernel: [ 37.912333] bio: create slab <bio-0> at 0
Jul 2 08:46:09 zumbi kernel: [ 37.913482] ACPI: EC: Look up EC in DSDT
Jul 2 08:46:09 zumbi kernel: [ 37.929350] ACPI: Interpreter enabled
Jul 2 08:46:09 zumbi kernel: [ 37.929798] ACPI: (supports S0 S1 S3 S4 S5)
Jul 2 08:46:09 zumbi kernel: [ 37.930527] ACPI: Using IOAPIC for interrupt
routing
Jul 2 08:46:09 zumbi kernel: [ 37.935507] ACPI: No dock devices found.
Jul 2 08:46:09 zumbi kernel: [ 37.935975] ACPI: PCI Root Bridge [PCI0]
(0000:00)
Jul 2 08:46:09 zumbi kernel: [ 37.936585] pci 0000:00:01.0: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.937156] pci 0000:00:01.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.937672] pci 0000:00:03.0: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.938241] pci 0000:00:03.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.938759] pci 0000:00:07.0: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.939328] pci 0000:00:07.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.940048] pci 0000:00:1a.0: reg 20 io port:
[0x50c0-0x50df]
Jul 2 08:46:09 zumbi kernel: [ 37.940110] pci 0000:00:1a.1: reg 20 io port:
[0x50a0-0x50bf]
Jul 2 08:46:09 zumbi kernel: [ 37.940170] pci 0000:00:1a.2: reg 20 io port:
[0x5080-0x509f]
Jul 2 08:46:09 zumbi kernel: [ 37.940228] pci 0000:00:1a.7: reg 10 32bit
mmio: [0xb7201400-0xb72017ff]
Jul 2 08:46:09 zumbi kernel: [ 37.940273] pci 0000:00:1a.7: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.940843] pci 0000:00:1a.7: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.941364] pci 0000:00:1c.0: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.941933] pci 0000:00:1c.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.942456] pci 0000:00:1c.1: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.943024] pci 0000:00:1c.1: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.943550] pci 0000:00:1c.4: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.944121] pci 0000:00:1c.4: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.944642] pci 0000:00:1d.0: reg 20 io port:
[0x5060-0x507f]
Jul 2 08:46:09 zumbi kernel: [ 37.944702] pci 0000:00:1d.1: reg 20 io port:
[0x5040-0x505f]
Jul 2 08:46:09 zumbi kernel: [ 37.944762] pci 0000:00:1d.2: reg 20 io port:
[0x5020-0x503f]
Jul 2 08:46:09 zumbi kernel: [ 37.944820] pci 0000:00:1d.7: reg 10 32bit
mmio: [0xb7201000-0xb72013ff]
Jul 2 08:46:09 zumbi kernel: [ 37.944864] pci 0000:00:1d.7: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.945435] pci 0000:00:1d.7: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.951321] pci 0000:00:1f.0: Force enabled
HPET at 0xfed00000
Jul 2 08:46:09 zumbi kernel: [ 37.951325] pci 0000:00:1f.0: quirk: region
0400-047f claimed by ICH6 ACPI/GPIO/TCO
Jul 2 08:46:09 zumbi kernel: [ 37.952192] pci 0000:00:1f.0: quirk: region
0500-053f claimed by ICH6 GPIO
Jul 2 08:46:09 zumbi kernel: [ 37.952800] pci 0000:00:1f.0: ICH7 LPC Generic
IO decode 1 PIO at 0680 (mask 007f)
Jul 2 08:46:09 zumbi kernel: [ 37.953660] pci 0000:00:1f.0: ICH7 LPC Generic
IO decode 2 PIO at 0810 (mask 007f)
Jul 2 08:46:09 zumbi kernel: [ 37.954567] pci 0000:00:1f.2: reg 10 io port:
[0x5138-0x513f]
Jul 2 08:46:09 zumbi kernel: [ 37.954572] pci 0000:00:1f.2: reg 14 io port:
[0x514c-0x514f]
Jul 2 08:46:09 zumbi kernel: [ 37.954577] pci 0000:00:1f.2: reg 18 io port:
[0x5130-0x5137]
Jul 2 08:46:09 zumbi kernel: [ 37.954581] pci 0000:00:1f.2: reg 1c io port:
[0x5148-0x514b]
Jul 2 08:46:09 zumbi kernel: [ 37.954586] pci 0000:00:1f.2: reg 20 io port:
[0x5110-0x511f]
Jul 2 08:46:09 zumbi kernel: [ 37.954590] pci 0000:00:1f.2: reg 24 io port:
[0x5100-0x510f]
Jul 2 08:46:09 zumbi kernel: [ 37.954630] pci 0000:00:1f.3: reg 10 64bit
mmio: [0xf0000000-0xf00000ff]
Jul 2 08:46:09 zumbi kernel: [ 37.954641] pci 0000:00:1f.3: reg 20 io port:
[0x5000-0x501f]
Jul 2 08:46:09 zumbi kernel: [ 37.954678] pci 0000:00:1f.5: reg 10 io port:
[0x5128-0x512f]
Jul 2 08:46:09 zumbi kernel: [ 37.954683] pci 0000:00:1f.5: reg 14 io port:
[0x5144-0x5147]
Jul 2 08:46:09 zumbi kernel: [ 37.954687] pci 0000:00:1f.5: reg 18 io port:
[0x5120-0x5127]
Jul 2 08:46:09 zumbi kernel: [ 37.954692] pci 0000:00:1f.5: reg 1c io port:
[0x5140-0x5143]
Jul 2 08:46:09 zumbi kernel: [ 37.954697] pci 0000:00:1f.5: reg 20 io port:
[0x50f0-0x50ff]
Jul 2 08:46:09 zumbi kernel: [ 37.954701] pci 0000:00:1f.5: reg 24 io port:
[0x50e0-0x50ef]
Jul 2 08:46:09 zumbi kernel: [ 37.954784] pci 0000:02:00.0: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.955354] pci 0000:02:00.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.955847] pci 0000:00:03.0: bridge io port:
[0x3000-0x4fff]
Jul 2 08:46:09 zumbi kernel: [ 37.955850] pci 0000:00:03.0: bridge 32bit
mmio: [0xb0000000-0xb6ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.955854] pci 0000:00:03.0: bridge 64bit
mmio pref: [0xd0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.955888] pci 0000:03:00.0: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.956456] pci 0000:03:00.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.956965] pci 0000:03:02.0: PME# supported
from D0 D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.957534] pci 0000:03:02.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.958033] pci 0000:02:00.0: bridge io port:
[0x3000-0x4fff]
Jul 2 08:46:09 zumbi kernel: [ 37.958036] pci 0000:02:00.0: bridge 32bit
mmio: [0xb0000000-0xb6ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958040] pci 0000:02:00.0: bridge 64bit
mmio pref: [0xd0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958072] pci 0000:04:00.0: reg 10 32bit
mmio: [0xb6000000-0xb6ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958081] pci 0000:04:00.0: reg 14 64bit
mmio: [0xe0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958090] pci 0000:04:00.0: reg 1c 64bit
mmio: [0xb4000000-0xb5ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958095] pci 0000:04:00.0: reg 24 io port:
[0x4000-0x407f]
Jul 2 08:46:09 zumbi kernel: [ 37.958101] pci 0000:04:00.0: reg 30 32bit
mmio: [0xfffe0000-0xffffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958154] pci 0000:03:00.0: bridge io port:
[0x4000-0x4fff]
Jul 2 08:46:09 zumbi kernel: [ 37.958157] pci 0000:03:00.0: bridge 32bit
mmio: [0xb4000000-0xb6ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958161] pci 0000:03:00.0: bridge 64bit
mmio pref: [0xe0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958192] pci 0000:05:00.0: reg 10 32bit
mmio: [0xb2000000-0xb2ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958202] pci 0000:05:00.0: reg 14 64bit
mmio: [0xd0000000-0xdfffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958211] pci 0000:05:00.0: reg 1c 64bit
mmio: [0xb0000000-0xb1ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958216] pci 0000:05:00.0: reg 24 io port:
[0x3000-0x307f]
Jul 2 08:46:09 zumbi kernel: [ 37.958222] pci 0000:05:00.0: reg 30 32bit
mmio: [0xfffe0000-0xffffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958276] pci 0000:03:02.0: bridge io port:
[0x3000-0x3fff]
Jul 2 08:46:09 zumbi kernel: [ 37.958279] pci 0000:03:02.0: bridge 32bit
mmio: [0xb0000000-0xb2ffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958283] pci 0000:03:02.0: bridge 64bit
mmio pref: [0xd0000000-0xdfffffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958450] pci 0000:08:00.0: reg 10 64bit
mmio: [0xb7100000-0xb710ffff]
Jul 2 08:46:09 zumbi kernel: [ 37.958515] pci 0000:08:00.0: PME# supported
from D3hot D3cold
Jul 2 08:46:09 zumbi kernel: [ 37.959120] pci 0000:08:00.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.959679] pci 0000:00:1c.1: bridge 32bit
mmio: [0xb7100000-0xb71fffff]
Jul 2 08:46:09 zumbi kernel: [ 37.959723] pci 0000:09:00.0: reg 10 io port:
[0x2018-0x201f]
Jul 2 08:46:09 zumbi kernel: [ 37.959730] pci 0000:09:00.0: reg 14 io port:
[0x2024-0x2027]
Jul 2 08:46:09 zumbi kernel: [ 37.959737] pci 0000:09:00.0: reg 18 io port:
[0x2010-0x2017]
Jul 2 08:46:09 zumbi kernel: [ 37.959744] pci 0000:09:00.0: reg 1c io port:
[0x2020-0x2023]
Jul 2 08:46:09 zumbi kernel: [ 37.959750] pci 0000:09:00.0: reg 20 io port:
[0x2000-0x200f]
Jul 2 08:46:09 zumbi kernel: [ 37.959757] pci 0000:09:00.0: reg 24 32bit
mmio: [0xb7000000-0xb70003ff]
Jul 2 08:46:09 zumbi kernel: [ 37.959794] pci 0000:09:00.0: supports D1
Jul 2 08:46:09 zumbi kernel: [ 37.959796] pci 0000:09:00.0: PME# supported
from D0 D1 D3hot
Jul 2 08:46:09 zumbi kernel: [ 37.960350] pci 0000:09:00.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 37.960863] pci 0000:00:1c.4: bridge io port:
[0x2000-0x2fff]
Jul 2 08:46:09 zumbi kernel: [ 37.960866] pci 0000:00:1c.4: bridge 32bit
mmio: [0xb7000000-0xb70fffff]
Jul 2 08:46:09 zumbi kernel: [ 37.960891] pci 0000:0a:02.0: reg 10 io port:
[0x1000-0x101f]
Jul 2 08:46:09 zumbi kernel: [ 37.960958] pci 0000:00:1e.0: transparent
bridge
Jul 2 08:46:09 zumbi kernel: [ 37.961456] pci 0000:00:1e.0: bridge io port:
[0x1000-0x1fff]
Jul 2 08:46:09 zumbi kernel: [ 37.961483] pci_bus 0000:00: on NUMA node 0
Jul 2 08:46:09 zumbi kernel: [ 37.961487] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
Jul 2 08:46:09 zumbi kernel: [ 37.961973] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.P32_._PRT]
Jul 2 08:46:09 zumbi kernel: [ 37.962112] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEG1._PRT]
Jul 2 08:46:09 zumbi kernel: [ 37.962172] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEG3._PRT]
Jul 2 08:46:09 zumbi kernel: [ 37.962231] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEG7._PRT]
Jul 2 08:46:09 zumbi kernel: [ 37.962291] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX1._PRT]
Jul 2 08:46:09 zumbi kernel: [ 37.962351] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PEX4._PRT]
Jul 2 08:46:09 zumbi kernel: [ 37.968189] ACPI: PCI Interrupt Link [LNKA]
(IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jul 2 08:46:09 zumbi kernel: [ 37.969751] ACPI: PCI Interrupt Link [LNKB]
(IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jul 2 08:46:09 zumbi kernel: [ 37.971314] ACPI: PCI Interrupt Link [LNKC]
(IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jul 2 08:46:09 zumbi kernel: [ 37.972878] ACPI: PCI Interrupt Link [LNKD]
(IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jul 2 08:46:09 zumbi kernel: [ 37.974440] ACPI: PCI Interrupt Link [LNKE]
(IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jul 2 08:46:09 zumbi kernel: [ 37.976153] ACPI: PCI Interrupt Link [LNKF]
(IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Jul 2 08:46:09 zumbi kernel: [ 37.977715] ACPI: PCI Interrupt Link [LNKG]
(IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Jul 2 08:46:09 zumbi kernel: [ 37.979428] ACPI: PCI Interrupt Link [LNKH]
(IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Jul 2 08:46:09 zumbi kernel: [ 37.980987] xenbus_probe_backend_init bus
registered ok
Jul 2 08:46:09 zumbi kernel: [ 37.981534] xenbus_probe_frontend_init bus
registered ok
Jul 2 08:46:09 zumbi kernel: [ 37.982172] SCSI subsystem initialized
Jul 2 08:46:09 zumbi kernel: [ 37.982705] libata version 3.00 loaded.
Jul 2 08:46:09 zumbi kernel: [ 37.982839] usbcore: registered new interface
driver usbfs
Jul 2 08:46:09 zumbi kernel: [ 37.983398] usbcore: registered new interface
driver hub
Jul 2 08:46:09 zumbi kernel: [ 37.983955] usbcore: registered new device
driver usb
Jul 2 08:46:09 zumbi kernel: [ 37.984603] PCI: Using ACPI for IRQ routing
Jul 2 08:46:09 zumbi kernel: [ 38.004077] cfg80211: Using static regulatory
domain info
Jul 2 08:46:09 zumbi kernel: [ 38.004617] cfg80211: Regulatory domain: US
Jul 2 08:46:09 zumbi kernel: [ 38.005092] ^I(start_freq - end_freq @
bandwidth), (max_antenna_gain, max_eirp)
Jul 2 08:46:09 zumbi kernel: [ 38.005934] ^I(2402000 KHz - 2472000 KHz @
40000 KHz), (600 mBi, 2700 mBm)
Jul 2 08:46:09 zumbi kernel: [ 38.006536] ^I(5170000 KHz - 5190000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Jul 2 08:46:09 zumbi kernel: [ 38.007139] ^I(5190000 KHz - 5210000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Jul 2 08:46:09 zumbi kernel: [ 38.007741] ^I(5210000 KHz - 5230000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Jul 2 08:46:09 zumbi kernel: [ 38.008343] ^I(5230000 KHz - 5330000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Jul 2 08:46:09 zumbi kernel: [ 38.008945] ^I(5735000 KHz - 5835000 KHz @
40000 KHz), (600 mBi, 3000 mBm)
Jul 2 08:46:09 zumbi kernel: [ 38.009548] NetLabel: Initializing
Jul 2 08:46:09 zumbi kernel: [ 38.009983] NetLabel: domain hash size = 128
Jul 2 08:46:09 zumbi kernel: [ 38.010465] NetLabel: protocols = UNLABELED
CIPSOv4
Jul 2 08:46:09 zumbi kernel: [ 38.010984] NetLabel: unlabeled traffic
allowed by default
Jul 2 08:46:09 zumbi kernel: [ 38.011534] cfg80211: Calling CRDA for
country: US
Jul 2 08:46:09 zumbi kernel: [ 38.012174] hpet clockevent registered
Jul 2 08:46:09 zumbi kernel: [ 38.012177] HPET: 4 timers in total, 0 timers
will be used for per-cpu timer
Jul 2 08:46:09 zumbi kernel: [ 38.012796] hpet0: at MMIO 0xfed00000, IRQs 2,
8, 0, 0
Jul 2 08:46:09 zumbi kernel: [ 38.013558] hpet0: 4 comparators, 64-bit
14.318180 MHz counter
Jul 2 08:46:09 zumbi kernel: [ 38.022036] Switched to high resolution mode
on CPU 0
Jul 2 08:46:09 zumbi kernel: [ 38.022159] Switched to high resolution mode
on CPU 3
Jul 2 08:46:09 zumbi kernel: [ 38.022161] Switched to high resolution mode
on CPU 1
Jul 2 08:46:09 zumbi kernel: [ 38.022163] Switched to high resolution mode
on CPU 2
Jul 2 08:46:09 zumbi kernel: [ 38.022526] Switched to high resolution mode
on CPU 4
Jul 2 08:46:09 zumbi kernel: [ 38.022589] Switched to high resolution mode
on CPU 6
Jul 2 08:46:09 zumbi kernel: [ 38.022592] Switched to high resolution mode
on CPU 7
Jul 2 08:46:09 zumbi kernel: [ 38.022614] Switched to high resolution mode
on CPU 5
Jul 2 08:46:09 zumbi kernel: [ 38.026039] pnp: PnP ACPI init
Jul 2 08:46:09 zumbi kernel: [ 38.026468] ACPI: bus type pnp registered
Jul 2 08:46:09 zumbi kernel: [ 38.028458] pnp: PnP ACPI: found 8 devices
Jul 2 08:46:09 zumbi kernel: [ 38.028928] ACPI: ACPI bus type pnp
unregistered
Jul 2 08:46:09 zumbi kernel: [ 38.029430] system 00:05: ioport range
0x500-0x53f has been reserved
Jul 2 08:46:09 zumbi kernel: [ 38.030012] system 00:05: ioport range
0x400-0x47f has been reserved
Jul 2 08:46:09 zumbi kernel: [ 38.030594] system 00:05: ioport range
0x680-0x6ff has been reserved
Jul 2 08:46:09 zumbi kernel: [ 38.036015] pci 0000:00:01.0: PCI bridge,
secondary bus 0000:01
Jul 2 08:46:09 zumbi kernel: [ 38.036576] pci 0000:00:01.0: IO window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.037086] pci 0000:00:01.0: MEM window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.037600] pci 0000:00:01.0: PREFETCH
window: disabled
Jul 2 08:46:09 zumbi kernel: [ 38.038137] pci 0000:04:00.0: BAR 6: can't
allocate mem resource [0xf0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.039021] pci 0000:03:00.0: PCI bridge,
secondary bus 0000:04
Jul 2 08:46:09 zumbi kernel: [ 38.039581] pci 0000:03:00.0: IO window:
0x4000-0x4fff
Jul 2 08:46:09 zumbi kernel: [ 38.040113] pci 0000:03:00.0: MEM window:
0xb4000000-0xb6ffffff
Jul 2 08:46:09 zumbi kernel: [ 38.040681] pci 0000:03:00.0: PREFETCH
window: 0x000000e0000000-0x000000efffffff
Jul 2 08:46:09 zumbi kernel: [ 38.041543] pci 0000:05:00.0: BAR 6: can't
allocate mem resource [0xe0000000-0xdfffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.042428] pci 0000:03:02.0: PCI bridge,
secondary bus 0000:05
Jul 2 08:46:09 zumbi kernel: [ 38.042986] pci 0000:03:02.0: IO window:
0x3000-0x3fff
Jul 2 08:46:09 zumbi kernel: [ 38.043518] pci 0000:03:02.0: MEM window:
0xb0000000-0xb2ffffff
Jul 2 08:46:09 zumbi kernel: [ 38.044088] pci 0000:03:02.0: PREFETCH
window: 0x000000d0000000-0x000000dfffffff
Jul 2 08:46:09 zumbi kernel: [ 38.044950] pci 0000:02:00.0: PCI bridge,
secondary bus 0000:03
Jul 2 08:46:09 zumbi kernel: [ 38.045510] pci 0000:02:00.0: IO window:
0x3000-0x4fff
Jul 2 08:46:09 zumbi kernel: [ 38.046042] pci 0000:02:00.0: MEM window:
0xb0000000-0xb6ffffff
Jul 2 08:46:09 zumbi kernel: [ 38.046612] pci 0000:02:00.0: PREFETCH
window: 0x000000d0000000-0x000000efffffff
Jul 2 08:46:09 zumbi kernel: [ 38.047476] pci 0000:00:03.0: PCI bridge,
secondary bus 0000:02
Jul 2 08:46:09 zumbi kernel: [ 38.048036] pci 0000:00:03.0: IO window:
0x3000-0x4fff
Jul 2 08:46:09 zumbi kernel: [ 38.048567] pci 0000:00:03.0: MEM window:
0xb0000000-0xb6ffffff
Jul 2 08:46:09 zumbi kernel: [ 38.049137] pci 0000:00:03.0: PREFETCH
window: 0x000000d0000000-0x000000efffffff
Jul 2 08:46:09 zumbi kernel: [ 38.049997] pci 0000:00:07.0: PCI bridge,
secondary bus 0000:06
Jul 2 08:46:09 zumbi kernel: [ 38.050556] pci 0000:00:07.0: IO window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.051066] pci 0000:00:07.0: MEM window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.051577] pci 0000:00:07.0: PREFETCH
window: disabled
Jul 2 08:46:09 zumbi kernel: [ 38.052114] pci 0000:00:1c.0: PCI bridge,
secondary bus 0000:07
Jul 2 08:46:09 zumbi kernel: [ 38.052672] pci 0000:00:1c.0: IO window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.053182] pci 0000:00:1c.0: MEM window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.053695] pci 0000:00:1c.0: PREFETCH
window: disabled
Jul 2 08:46:09 zumbi kernel: [ 38.054230] pci 0000:00:1c.1: PCI bridge,
secondary bus 0000:08
Jul 2 08:46:09 zumbi kernel: [ 38.054789] pci 0000:00:1c.1: IO window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.055300] pci 0000:00:1c.1: MEM window:
0xb7100000-0xb71fffff
Jul 2 08:46:09 zumbi kernel: [ 38.055868] pci 0000:00:1c.1: PREFETCH
window: disabled
Jul 2 08:46:09 zumbi kernel: [ 38.056407] pci 0000:00:1c.4: PCI bridge,
secondary bus 0000:09
Jul 2 08:46:09 zumbi kernel: [ 38.056967] pci 0000:00:1c.4: IO window:
0x2000-0x2fff
Jul 2 08:46:09 zumbi kernel: [ 38.057500] pci 0000:00:1c.4: MEM window:
0xb7000000-0xb70fffff
Jul 2 08:46:09 zumbi kernel: [ 38.058070] pci 0000:00:1c.4: PREFETCH
window: disabled
Jul 2 08:46:09 zumbi kernel: [ 38.058604] pci 0000:00:1e.0: PCI bridge,
secondary bus 0000:0a
Jul 2 08:46:09 zumbi kernel: [ 38.059163] pci 0000:00:1e.0: IO window:
0x1000-0x1fff
Jul 2 08:46:09 zumbi kernel: [ 38.059695] pci 0000:00:1e.0: MEM window:
disabled
Jul 2 08:46:09 zumbi kernel: [ 38.060209] pci 0000:00:1e.0: PREFETCH
window: disabled
Jul 2 08:46:09 zumbi kernel: [ 38.060748] alloc irq_desc for 16 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.060749] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.060753] pci 0000:00:01.0: PCI INT A -> GSI
16 (level, low) -> IRQ 16
Jul 2 08:46:09 zumbi kernel: [ 38.061352] pci 0000:00:01.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.061356] pci 0000:00:03.0: PCI INT A -> GSI
16 (level, low) -> IRQ 16
Jul 2 08:46:09 zumbi kernel: [ 38.061954] pci 0000:00:03.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.061959] pci 0000:02:00.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.061963] pci 0000:03:00.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.061968] pci 0000:03:02.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.061972] pci 0000:00:07.0: PCI INT A -> GSI
16 (level, low) -> IRQ 16
Jul 2 08:46:09 zumbi kernel: [ 38.062573] pci 0000:00:07.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.062577] alloc irq_desc for 17 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.062578] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.062581] pci 0000:00:1c.0: PCI INT A -> GSI
17 (level, low) -> IRQ 17
Jul 2 08:46:09 zumbi kernel: [ 38.063182] pci 0000:00:1c.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.063186] pci 0000:00:1c.1: PCI INT B -> GSI
16 (level, low) -> IRQ 16
Jul 2 08:46:09 zumbi kernel: [ 38.063785] pci 0000:00:1c.1: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.063789] pci 0000:00:1c.4: PCI INT A -> GSI
17 (level, low) -> IRQ 17
Jul 2 08:46:09 zumbi kernel: [ 38.064389] pci 0000:00:1c.4: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.064394] pci 0000:00:1e.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.064396] pci_bus 0000:00: resource 0 io:
[0x00-0xffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064398] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064400] pci_bus 0000:02: resource 0 io:
[0x3000-0x4fff]
Jul 2 08:46:09 zumbi kernel: [ 38.064402] pci_bus 0000:02: resource 1 mem:
[0xb0000000-0xb6ffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064403] pci_bus 0000:02: resource 2 pref
mem [0xd0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064405] pci_bus 0000:03: resource 0 io:
[0x3000-0x4fff]
Jul 2 08:46:09 zumbi kernel: [ 38.064406] pci_bus 0000:03: resource 1 mem:
[0xb0000000-0xb6ffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064408] pci_bus 0000:03: resource 2 pref
mem [0xd0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064409] pci_bus 0000:04: resource 0 io:
[0x4000-0x4fff]
Jul 2 08:46:09 zumbi kernel: [ 38.064411] pci_bus 0000:04: resource 1 mem:
[0xb4000000-0xb6ffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064413] pci_bus 0000:04: resource 2 pref
mem [0xe0000000-0xefffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064414] pci_bus 0000:05: resource 0 io:
[0x3000-0x3fff]
Jul 2 08:46:09 zumbi kernel: [ 38.064416] pci_bus 0000:05: resource 1 mem:
[0xb0000000-0xb2ffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064417] pci_bus 0000:05: resource 2 pref
mem [0xd0000000-0xdfffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064419] pci_bus 0000:08: resource 1 mem:
[0xb7100000-0xb71fffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064421] pci_bus 0000:09: resource 0 io:
[0x2000-0x2fff]
Jul 2 08:46:09 zumbi kernel: [ 38.064422] pci_bus 0000:09: resource 1 mem:
[0xb7000000-0xb70fffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064424] pci_bus 0000:0a: resource 0 io:
[0x1000-0x1fff]
Jul 2 08:46:09 zumbi kernel: [ 38.064425] pci_bus 0000:0a: resource 3 io:
[0x00-0xffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064427] pci_bus 0000:0a: resource 4 mem:
[0x000000-0xffffffffffffffff]
Jul 2 08:46:09 zumbi kernel: [ 38.064444] NET: Registered protocol family 2
Jul 2 08:46:09 zumbi kernel: [ 38.071071] IP route cache hash table entries:
131072 (order: 8, 1048576 bytes)
Jul 2 08:46:09 zumbi kernel: [ 38.072139] TCP established hash table
entries: 262144 (order: 10, 4194304 bytes)
Jul 2 08:46:09 zumbi kernel: [ 38.073576] TCP bind hash table entries: 65536
(order: 8, 1048576 bytes)
Jul 2 08:46:09 zumbi kernel: [ 38.074320] TCP: Hash tables configured
(established 262144 bind 65536)
Jul 2 08:46:09 zumbi kernel: [ 38.074913] TCP reno registered
Jul 2 08:46:09 zumbi kernel: [ 38.078111] NET: Registered protocol family 1
Jul 2 08:46:09 zumbi kernel: [ 38.078634] Trying to unpack rootfs image as
initramfs...
Jul 2 08:46:09 zumbi kernel: [ 38.144397] Freeing initrd memory: 3497k freed
Jul 2 08:46:09 zumbi kernel: [ 38.145505] kvm: already loaded the other
module
Jul 2 08:46:09 zumbi kernel: [ 38.146087] [ds] bts selftest...no resume
progress/overflow...passed.
Jul 2 08:46:09 zumbi kernel: [ 38.149638] microcode: CPU0 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.150225] microcode: CPU1 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.150808] microcode: CPU2 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.151394] microcode: CPU3 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.151978] microcode: CPU4 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.152568] microcode: CPU5 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.153153] microcode: CPU6 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.153736] microcode: CPU7 sig=0x106a2,
pf=0x2, revision=0xffff0013
Jul 2 08:46:09 zumbi kernel: [ 38.154342] Microcode Update Driver: v2.00
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
Jul 2 08:46:09 zumbi kernel: [ 38.155216] Scanning for low memory corruption
every 60 seconds
Jul 2 08:46:09 zumbi kernel: [ 38.155915] audit: initializing netlink socket
(disabled)
Jul 2 08:46:09 zumbi kernel: [ 38.156458] type=2000 audit(1246520748.834:1):
initialized
Jul 2 08:46:09 zumbi kernel: [ 38.167245] HugeTLB registered 2 MB page size,
pre-allocated 0 pages
Jul 2 08:46:09 zumbi kernel: [ 38.169421] VFS: Disk quotas dquot_6.5.2
Jul 2 08:46:09 zumbi kernel: [ 38.169932] Dquot-cache hash table entries:
512 (order 0, 4096 bytes)
Jul 2 08:46:09 zumbi kernel: [ 38.171026] msgmni has been set to 7894
Jul 2 08:46:09 zumbi kernel: [ 38.171551] SELinux: Registering netfilter
hooks
Jul 2 08:46:09 zumbi kernel: [ 38.171820] alg: No test for stdrng (krng)
Jul 2 08:46:09 zumbi kernel: [ 38.172349] Block layer SCSI generic (bsg)
driver version 0.4 loaded (major 252)
Jul 2 08:46:09 zumbi kernel: [ 38.173203] io scheduler noop registered
Jul 2 08:46:09 zumbi kernel: [ 38.173662] io scheduler anticipatory
registered
Jul 2 08:46:09 zumbi kernel: [ 38.174158] io scheduler deadline registered
Jul 2 08:46:09 zumbi kernel: [ 38.174641] io scheduler cfq registered
(default)
Jul 2 08:46:09 zumbi kernel: [ 38.175157] pci 0000:00:1a.0:
uhci_check_and_reset_hc: legsup = 0x0f10
Jul 2 08:46:09 zumbi kernel: [ 38.175158] pci 0000:00:1a.0: Performing full
reset
Jul 2 08:46:09 zumbi kernel: [ 38.175172] pci 0000:00:1a.1:
uhci_check_and_reset_hc: legsup = 0x0010
Jul 2 08:46:09 zumbi kernel: [ 38.175174] pci 0000:00:1a.1: Performing full
reset
Jul 2 08:46:09 zumbi kernel: [ 38.175187] pci 0000:00:1a.2:
uhci_check_and_reset_hc: legsup = 0x0010
Jul 2 08:46:09 zumbi kernel: [ 38.175188] pci 0000:00:1a.2: Performing full
reset
Jul 2 08:46:09 zumbi kernel: [ 38.175319] pci 0000:00:1d.0:
uhci_check_and_reset_hc: legsup = 0x0f10
Jul 2 08:46:09 zumbi kernel: [ 38.175321] pci 0000:00:1d.0: Performing full
reset
Jul 2 08:46:09 zumbi kernel: [ 38.175334] pci 0000:00:1d.1:
uhci_check_and_reset_hc: legsup = 0x0010
Jul 2 08:46:09 zumbi kernel: [ 38.175335] pci 0000:00:1d.1: Performing full
reset
Jul 2 08:46:09 zumbi kernel: [ 38.175349] pci 0000:00:1d.2:
uhci_check_and_reset_hc: legsup = 0x0010
Jul 2 08:46:09 zumbi kernel: [ 38.175350] pci 0000:00:1d.2: Performing full
reset
Jul 2 08:46:09 zumbi kernel: [ 38.175513] pci 0000:05:00.0: Boot video device
Jul 2 08:46:09 zumbi kernel: [ 38.175622] alloc irq_desc for 24 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175623] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175629] pcieport-driver 0000:00:01.0: irq
24 for MSI/MSI-X
Jul 2 08:46:09 zumbi kernel: [ 38.175638] pcieport-driver 0000:00:01.0:
setting latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.175746] alloc irq_desc for 25 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175747] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175751] pcieport-driver 0000:00:03.0: irq
25 for MSI/MSI-X
Jul 2 08:46:09 zumbi kernel: [ 38.175759] pcieport-driver 0000:00:03.0:
setting latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.175862] alloc irq_desc for 26 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175863] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175868] pcieport-driver 0000:00:07.0: irq
26 for MSI/MSI-X
Jul 2 08:46:09 zumbi kernel: [ 38.175875] pcieport-driver 0000:00:07.0:
setting latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.175985] alloc irq_desc for 27 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175986] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.175991] pcieport-driver 0000:00:1c.0: irq
27 for MSI/MSI-X
Jul 2 08:46:09 zumbi kernel: [ 38.176002] pcieport-driver 0000:00:1c.0:
setting latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.176113] alloc irq_desc for 28 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.176114] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.176120] pcieport-driver 0000:00:1c.1: irq
28 for MSI/MSI-X
Jul 2 08:46:09 zumbi kernel: [ 38.176130] pcieport-driver 0000:00:1c.1:
setting latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.176245] alloc irq_desc for 29 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.176246] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.176251] pcieport-driver 0000:00:1c.4: irq
29 for MSI/MSI-X
Jul 2 08:46:09 zumbi kernel: [ 38.176261] pcieport-driver 0000:00:1c.4:
setting latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.176441] aer 0000:00:01.0:pcie02: AER
service couldn't init device: no _OSC support
Jul 2 08:46:09 zumbi kernel: [ 38.176445] aer 0000:00:03.0:pcie02: AER
service couldn't init device: no _OSC support
Jul 2 08:46:09 zumbi kernel: [ 38.176449] aer 0000:00:07.0:pcie02: AER
service couldn't init device: no _OSC support
Jul 2 08:46:09 zumbi kernel: [ 38.176467] pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Jul 2 08:46:09 zumbi kernel: [ 38.177166] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Jul 2 08:46:09 zumbi kernel: [ 38.178020] ACPI: Power Button [PWRF]
Jul 2 08:46:09 zumbi kernel: [ 38.178519] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
Jul 2 08:46:09 zumbi kernel: [ 38.179414] ACPI: Sleep Button [SLPB]
Jul 2 08:46:09 zumbi kernel: [ 38.180314] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.181238] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.181728] Monitor-Mwait will be used to
enter C-1 state
Jul 2 08:46:09 zumbi kernel: [ 38.181744] Monitor-Mwait will be used to
enter C-2 state
Jul 2 08:46:09 zumbi kernel: [ 38.181757] Monitor-Mwait will be used to
enter C-3 state
Jul 2 08:46:09 zumbi kernel: [ 38.181787] ACPI: CPU0 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.182554] processor ACPI_CPU:00: registered
as cooling_device0
Jul 2 08:46:09 zumbi kernel: [ 38.183121] ACPI: Processor [CPU0] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.184166] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.185090] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.185640] ACPI: CPU1 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.186408] processor ACPI_CPU:02: registered
as cooling_device1
Jul 2 08:46:09 zumbi kernel: [ 38.186974] ACPI: Processor [CPU2] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.188026] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.188951] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.189504] ACPI: CPU2 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.195578] processor ACPI_CPU:04: registered
as cooling_device2
Jul 2 08:46:09 zumbi kernel: [ 38.196146] ACPI: Processor [CPU4] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.197195] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.198116] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.198668] ACPI: CPU3 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.199435] processor ACPI_CPU:06: registered
as cooling_device3
Jul 2 08:46:09 zumbi kernel: [ 38.200000] ACPI: Processor [CPU6] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.201049] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.201974] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.202524] ACPI: CPU4 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.203288] processor ACPI_CPU:08: registered
as cooling_device4
Jul 2 08:46:09 zumbi kernel: [ 38.203854] ACPI: Processor [CPU8] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.204899] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.205823] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.206365] ACPI: CPU5 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.207126] processor ACPI_CPU:0a: registered
as cooling_device5
Jul 2 08:46:09 zumbi kernel: [ 38.207694] ACPI: Processor [CPUA] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.208740] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.209663] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.210207] ACPI: CPU6 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.210970] processor ACPI_CPU:0c: registered
as cooling_device6
Jul 2 08:46:09 zumbi kernel: [ 38.211538] ACPI: Processor [CPUC] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.212586] ACPI Warning
(processor_throttling-0843): Invalid throttling state, reset
Jul 2 08:46:09 zumbi kernel: [ 38.213511] [20090320]
Jul 2 08:46:09 zumbi kernel: [ 38.214051] ACPI: CPU7 (power states: C1[C1]
C2[C2] C3[C3])
Jul 2 08:46:09 zumbi kernel: [ 38.214815] processor ACPI_CPU:0e: registered
as cooling_device7
Jul 2 08:46:09 zumbi kernel: [ 38.215381] ACPI: Processor [CPUE] (supports 8
throttling states)
Jul 2 08:46:09 zumbi kernel: [ 38.217381] ***blkif_init
Jul 2 08:46:09 zumbi kernel: [ 38.217780] *** netif_init
Jul 2 08:46:09 zumbi kernel: [ 38.218181] xenfs: not registering filesystem
on non-xen platform
Jul 2 08:46:09 zumbi kernel: [ 38.220360] Non-volatile memory driver v1.3
Jul 2 08:46:09 zumbi kernel: [ 38.220892] Linux agpgart interface v0.103
Jul 2 08:46:09 zumbi kernel: [ 38.221414] [drm] Initialized drm 1.1.0
20060810
Jul 2 08:46:09 zumbi kernel: [ 38.221949] Serial: 8250/16550 driver, 4
ports, IRQ sharing enabled
Jul 2 08:46:09 zumbi kernel: [ 38.466006] serial8250: ttyS1 at I/O 0x2f8
(irq = 3) is a NS16550A
Jul 2 08:46:09 zumbi kernel: [ 38.466779] alloc irq_desc for 18 on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.466780] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 38.466784] serial 0000:0a:02.0: PCI INT A ->
GSI 18 (level, low) -> IRQ 18
Jul 2 08:46:09 zumbi kernel: [ 38.467473] 0000:0a:02.0: ttyS0 at I/O 0x1000
(irq = 18) is a 16550A
Jul 2 08:46:09 zumbi kernel: [ 38.468402] 0000:0a:02.0: ttyS2 at I/O 0x1008
(irq = 18) is a 16550A
Jul 2 08:46:09 zumbi kernel: [ 38.470194] brd: module loaded
Jul 2 08:46:09 zumbi kernel: [ 38.471187] loop: module loaded
Jul 2 08:46:09 zumbi kernel: [ 38.471774] input: Macintosh mouse button
emulation as /devices/virtual/input/input2
Jul 2 08:46:09 zumbi kernel: [ 38.473015] Driver 'sd' needs updating -
please use bus_type methods
Jul 2 08:46:09 zumbi kernel: [ 38.473868] Driver 'sr' needs updating -
please use bus_type methods
Jul 2 08:46:09 zumbi kernel: [ 38.474754] ahci 0000:09:00.0: version 3.0
Jul 2 08:46:09 zumbi kernel: [ 38.474762] ahci 0000:09:00.0: PCI INT A ->
GSI 16 (level, low) -> IRQ 16
Jul 2 08:46:09 zumbi kernel: [ 38.475646] ahci 0000:09:00.0: controller
can't do NCQ, turning off CAP_NCQ
Jul 2 08:46:09 zumbi kernel: [ 38.476533] ahci 0000:09:00.0: controller
can't do PMP, turning off CAP_PMP
Jul 2 08:46:09 zumbi kernel: [ 38.477420] ahci 0000:09:00.0: MV_AHCI HACK:
port_map 7 -> 3
Jul 2 08:46:09 zumbi kernel: [ 38.478190] ahci 0000:09:00.0: Disabling your
PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
Jul 2 08:46:09 zumbi kernel: [ 38.479612] ahci: SSS flag set, parallel bus
scan disabled
Jul 2 08:46:09 zumbi kernel: [ 38.480398] ahci 0000:09:00.0: AHCI 0001.0000
32 slots 3 ports 3 Gbps 0x3 impl IDE mode
Jul 2 08:46:09 zumbi kernel: [ 38.481598] ahci 0000:09:00.0: flags: 64bit
stag led slum part
Jul 2 08:46:09 zumbi kernel: [ 38.482395] ahci 0000:09:00.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 38.482474] scsi0 : ahci
Jul 2 08:46:09 zumbi kernel: [ 38.483041] scsi1 : ahci
Jul 2 08:46:09 zumbi kernel: [ 38.483593] scsi2 : ahci
Jul 2 08:46:09 zumbi kernel: [ 38.484134] ata1: SATA max UDMA/133 abar
m1024@0xb7000000 port 0xb7000100 irq 16
Jul 2 08:46:09 zumbi kernel: [ 38.485281] ata2: SATA max UDMA/133 abar
m1024@0xb7000000 port 0xb7000180 irq 16
Jul 2 08:46:09 zumbi kernel: [ 38.486426] ata3: DUMMY
Jul 2 08:46:09 zumbi kernel: [ 38.791806] ata1: SATA link down (SStatus 0
SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 39.096707] ata2: SATA link down (SStatus 0
SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 39.097504] ata_piix 0000:00:1f.2: version 2.13
Jul 2 08:46:09 zumbi kernel: [ 39.097509] alloc irq_desc for 19 on node -1
Jul 2 08:46:09 zumbi kernel: [ 39.097511] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 39.097514] ata_piix 0000:00:1f.2: PCI INT A
-> GSI 19 (level, low) -> IRQ 19
Jul 2 08:46:09 zumbi kernel: [ 39.098424] ata_piix 0000:00:1f.2: MAP [ P0 P2
P1 P3 ]
Jul 2 08:46:09 zumbi kernel: [ 39.099414] ata_piix 0000:00:1f.2: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 39.099446] scsi3 : ata_piix
Jul 2 08:46:09 zumbi kernel: [ 39.100031] scsi4 : ata_piix
Jul 2 08:46:09 zumbi kernel: [ 39.100661] ata4: SATA max UDMA/133 cmd 0x5138
ctl 0x514c bmdma 0x5110 irq 19
Jul 2 08:46:09 zumbi kernel: [ 39.101567] ata5: SATA max UDMA/133 cmd 0x5130
ctl 0x5148 bmdma 0x5118 irq 19
Jul 2 08:46:09 zumbi kernel: [ 39.862517] ata4.00: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 39.863376] ata4.01: SATA link down (SStatus 0
SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 39.882666] ata4.00: ATAPI: PIONEER BD-ROM
BDC-202, 1.04, max UDMA/66
Jul 2 08:46:09 zumbi kernel: [ 39.889671] ata4.00: configured for UDMA/66
Jul 2 08:46:09 zumbi kernel: [ 39.902874] scsi 3:0:0:0: CD-ROM
PIONEER BD-ROM BDC-202 1.04 PQ: 0 ANSI: 5
Jul 2 08:46:09 zumbi kernel: [ 39.926143] sr0: scsi3-mmc drive: 32x/32x
writer dvd-ram cd/rw xa/form2 cdda tray
Jul 2 08:46:09 zumbi kernel: [ 39.927305] Uniform CD-ROM driver Revision:
3.20
Jul 2 08:46:09 zumbi kernel: [ 39.928080] sr 3:0:0:0: Attached scsi CD-ROM
sr0
Jul 2 08:46:09 zumbi kernel: [ 39.928143] sr 3:0:0:0: Attached scsi generic
sg0 type 5
Jul 2 08:46:09 zumbi kernel: [ 40.689247] ata5.00: SATA link down (SStatus 0
SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 40.690036] ata5.01: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 40.704780] ata5.01: ATA-8: ST3500320AS, SD15,
max UDMA/133
Jul 2 08:46:09 zumbi kernel: [ 40.705552] ata5.01: 976773168 sectors, multi
16: LBA48 NCQ (depth 0/32)
Jul 2 08:46:09 zumbi kernel: [ 40.711776] ata5.01: configured for UDMA/133
Jul 2 08:46:09 zumbi kernel: [ 40.712475] scsi 4:0:1:0: Direct-Access
ATA ST3500320AS SD15 PQ: 0 ANSI: 5
Jul 2 08:46:09 zumbi kernel: [ 40.713797] sd 4:0:1:0: [sda] 976773168
512-byte hardware sectors: (500 GB/465 GiB)
Jul 2 08:46:09 zumbi kernel: [ 40.714974] sd 4:0:1:0: [sda] Write Protect is
off
Jul 2 08:46:09 zumbi kernel: [ 40.715670] sd 4:0:1:0: [sda] Mode Sense: 00
3a 00 00
Jul 2 08:46:09 zumbi kernel: [ 40.715683] sd 4:0:1:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Jul 2 08:46:09 zumbi kernel: [ 40.717030] sda: sda1 sda2 < sda5 >
Jul 2 08:46:09 zumbi kernel: [ 40.754655] sd 4:0:1:0: [sda] Attached SCSI
disk
Jul 2 08:46:09 zumbi kernel: [ 40.755394] sd 4:0:1:0: Attached scsi generic
sg1 type 0
Jul 2 08:46:09 zumbi kernel: [ 40.756176] ata_piix 0000:00:1f.5: PCI INT B
-> GSI 18 (level, low) -> IRQ 18
Jul 2 08:46:09 zumbi kernel: [ 40.757083] ata_piix 0000:00:1f.5: MAP [ P0 --
P1 -- ]
Jul 2 08:46:09 zumbi kernel: [ 40.758070] ata_piix 0000:00:1f.5: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 40.758105] scsi5 : ata_piix
Jul 2 08:46:09 zumbi kernel: [ 40.758698] scsi6 : ata_piix
Jul 2 08:46:09 zumbi kernel: [ 40.759311] ata6: SATA max UDMA/133 cmd 0x5128
ctl 0x5144 bmdma 0x50f0 irq 18
Jul 2 08:46:09 zumbi kernel: [ 40.760218] ata7: SATA max UDMA/133 cmd 0x5120
ctl 0x5140 bmdma 0x50f8 irq 18
Jul 2 08:46:09 zumbi kernel: [ 41.075846] ata6: SATA link down (SStatus 0
SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 41.531962] ata7: SATA link up 3.0 Gbps
(SStatus 123 SControl 300)
Jul 2 08:46:09 zumbi kernel: [ 41.535499] ata7.00: ATA-8: ST3500320AS, SD15,
max UDMA/133
Jul 2 08:46:09 zumbi kernel: [ 41.536270] ata7.00: 976773168 sectors, multi
16: LBA48 NCQ (depth 0/32)
Jul 2 08:46:09 zumbi kernel: [ 41.543523] ata7.00: configured for UDMA/133
Jul 2 08:46:09 zumbi kernel: [ 41.544214] scsi 6:0:0:0: Direct-Access
ATA ST3500320AS SD15 PQ: 0 ANSI: 5
Jul 2 08:46:09 zumbi kernel: [ 41.545530] sd 6:0:0:0: [sdb] 976773168
512-byte hardware sectors: (500 GB/465 GiB)
Jul 2 08:46:09 zumbi kernel: [ 41.546708] sd 6:0:0:0: [sdb] Write Protect is
off
Jul 2 08:46:09 zumbi kernel: [ 41.547402] sd 6:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Jul 2 08:46:09 zumbi kernel: [ 41.547414] sd 6:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Jul 2 08:46:09 zumbi kernel: [ 41.548753] sdb:
Jul 2 08:46:09 zumbi kernel: [ 41.553099] sd 6:0:0:0: [sdb] Attached SCSI
disk
Jul 2 08:46:09 zumbi kernel: [ 41.553830] sd 6:0:0:0: Attached scsi generic
sg2 type 0
Jul 2 08:46:09 zumbi kernel: [ 41.554726] Intel(R) PRO/1000 Network Driver -
version 7.3.21-k3-NAPI
Jul 2 08:46:09 zumbi kernel: [ 41.555568] Copyright (c) 1999-2006 Intel
Corporation.
Jul 2 08:46:09 zumbi kernel: [ 41.556320] e1000e: Intel(R) PRO/1000 Network
Driver - 0.3.3.4-k4
Jul 2 08:46:09 zumbi kernel: [ 41.557130] e1000e: Copyright (c) 1999-2008
Intel Corporation.
Jul 2 08:46:09 zumbi kernel: [ 41.557968] e100: Intel(R) PRO/100 Network
Driver, 3.5.24-k2-NAPI
Jul 2 08:46:09 zumbi kernel: [ 41.558778] e100: Copyright(c) 1999-2006 Intel
Corporation
Jul 2 08:46:09 zumbi kernel: [ 41.559565] tg3.c:v3.98 (February 25, 2009)
Jul 2 08:46:09 zumbi kernel: [ 41.560257] tg3 0000:08:00.0: PCI INT A -> GSI
17 (level, low) -> IRQ 17
Jul 2 08:46:09 zumbi kernel: [ 41.561170] tg3 0000:08:00.0: setting latency
timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.561989] tg3 0000:08:00.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 41.567990] eth0: Tigon3
[partno(BCM95721A211F) rev 4201] (PCI Express) MAC address 00:10:18:32:51:a2
Jul 2 08:46:09 zumbi kernel: [ 41.569297] eth0: attached PHY is 5750
(10/100/1000Base-T Ethernet) (WireSpeed[1])
Jul 2 08:46:09 zumbi kernel: [ 41.570459] eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] TSOcap[1]
Jul 2 08:46:09 zumbi kernel: [ 41.571292] eth0: dma_rwctrl[76180000]
dma_mask[64-bit]
Jul 2 08:46:09 zumbi kernel: [ 41.572069] sky2 driver version 1.22
Jul 2 08:46:09 zumbi kernel: [ 41.572769] console [netcon0] enabled
Jul 2 08:46:09 zumbi kernel: [ 41.573365] netconsole: network logging started
Jul 2 08:46:09 zumbi kernel: [ 41.574118] ehci_hcd: USB 2.0 'Enhanced' Host
Controller (EHCI) Driver
Jul 2 08:46:09 zumbi kernel: [ 41.574968] ehci_hcd: block sizes: qh 160 qtd
96 itd 192 sitd 96
Jul 2 08:46:09 zumbi kernel: [ 41.574980] ehci_hcd 0000:00:1a.7: PCI INT C
-> GSI 18 (level, low) -> IRQ 18
Jul 2 08:46:09 zumbi kernel: [ 41.575891] ehci_hcd 0000:00:1a.7: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.575893] ehci_hcd 0000:00:1a.7: EHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.576659]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file 'devices'
Jul 2 08:46:09 zumbi kernel: [ 41.576662]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.576693] ehci_hcd 0000:00:1a.7: new USB bus
registered, assigned bus number 1
Jul 2 08:46:09 zumbi kernel: [ 41.577843] ehci_hcd 0000:00:1a.7: reset
hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
Jul 2 08:46:09 zumbi kernel: [ 41.577846] ehci_hcd 0000:00:1a.7: reset
hcc_params 16871 thresh 7 uframes 1024 64 bit addr
Jul 2 08:46:09 zumbi kernel: [ 41.577862] ehci_hcd 0000:00:1a.7: reset
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul 2 08:46:09 zumbi kernel: [ 41.581757] ehci_hcd 0000:00:1a.7: debug port 1
Jul 2 08:46:09 zumbi kernel: [ 41.582432] ehci_hcd 0000:00:1a.7: cache line
size of 32 is not supported
Jul 2 08:46:09 zumbi kernel: [ 41.582434] ehci_hcd 0000:00:1a.7: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.582437] ehci_hcd 0000:00:1a.7: irq 18, io
mem 0xb7201400
Jul 2 08:46:09 zumbi kernel: [ 41.583211] ehci_hcd 0000:00:1a.7: reset
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul 2 08:46:09 zumbi kernel: [ 41.587091] ehci_hcd 0000:00:1a.7: init
command 010001 (park)=0 ithresh=1 period=1024 RUN
Jul 2 08:46:09 zumbi kernel: [ 41.591893] ehci_hcd 0000:00:1a.7: USB 2.0
started, EHCI 1.00
Jul 2 08:46:09 zumbi kernel: [ 41.592689] usb usb1: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.592693] usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
Jul 2 08:46:09 zumbi kernel: [ 41.593566] usb usb1: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.594697] usb usb1: Product: EHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.595398] usb usb1: Manufacturer: Linux
2.6.30-rc6-tip ehci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.596208] usb usb1: SerialNumber:
0000:00:1a.7
Jul 2 08:46:09 zumbi kernel: [ 41.596907] usb usb1: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.596930] usb usb1: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.596932] usb usb1: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.597698] usb usb1: adding 1-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.597707] usb 1-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.597727] hub 1-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.597729] hub 1-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.597730] hub 1-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.598336] hub 1-0:1.0: 6 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.598961] hub 1-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.598962] hub 1-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.598963] hub 1-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.598965] hub 1-0:1.0: power on to power
good time: 20ms
Jul 2 08:46:09 zumbi kernel: [ 41.598967] hub 1-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.598969] hub 1-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.599036]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.599078] alloc irq_desc for 23 on node -1
Jul 2 08:46:09 zumbi kernel: [ 41.599079] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 41.599083] ehci_hcd 0000:00:1d.7: PCI INT A
-> GSI 23 (level, low) -> IRQ 23
Jul 2 08:46:09 zumbi kernel: [ 41.599994] ehci_hcd 0000:00:1d.7: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.599996] ehci_hcd 0000:00:1d.7: EHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.600755]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '002'
Jul 2 08:46:09 zumbi kernel: [ 41.600786] ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 2
Jul 2 08:46:09 zumbi kernel: [ 41.601936] ehci_hcd 0000:00:1d.7: reset
hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
Jul 2 08:46:09 zumbi kernel: [ 41.601939] ehci_hcd 0000:00:1d.7: reset
hcc_params 16871 thresh 7 uframes 1024 64 bit addr
Jul 2 08:46:09 zumbi kernel: [ 41.601950] ehci_hcd 0000:00:1d.7: reset
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul 2 08:46:09 zumbi kernel: [ 41.605830] ehci_hcd 0000:00:1d.7: debug port 1
Jul 2 08:46:09 zumbi kernel: [ 41.606505] ehci_hcd 0000:00:1d.7: cache line
size of 32 is not supported
Jul 2 08:46:09 zumbi kernel: [ 41.606506] ehci_hcd 0000:00:1d.7: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.606515] ehci_hcd 0000:00:1d.7: irq 23, io
mem 0xb7201000
Jul 2 08:46:09 zumbi kernel: [ 41.607288] ehci_hcd 0000:00:1d.7: reset
command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Jul 2 08:46:09 zumbi kernel: [ 41.611164] ehci_hcd 0000:00:1d.7: init
command 010001 (park)=0 ithresh=1 period=1024 RUN
Jul 2 08:46:09 zumbi kernel: [ 41.615885] ehci_hcd 0000:00:1d.7: USB 2.0
started, EHCI 1.00
Jul 2 08:46:09 zumbi kernel: [ 41.616677] usb usb2: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.616681] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0002
Jul 2 08:46:09 zumbi kernel: [ 41.617554] usb usb2: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.618684] usb usb2: Product: EHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.619385] usb usb2: Manufacturer: Linux
2.6.30-rc6-tip ehci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.620194] usb usb2: SerialNumber:
0000:00:1d.7
Jul 2 08:46:09 zumbi kernel: [ 41.620893] usb usb2: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.620914] usb usb2: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.620915] usb usb2: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.621679] usb usb2: adding 2-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.621688] usb 2-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.621708] hub 2-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.621709] hub 2-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.621710] hub 2-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.622317] hub 2-0:1.0: 6 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.622941] hub 2-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.622941] hub 2-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.622943] hub 2-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.622944] hub 2-0:1.0: power on to power
good time: 20ms
Jul 2 08:46:09 zumbi kernel: [ 41.622946] hub 2-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.622948] hub 2-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.622995]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.623049] ohci_hcd: USB 1.1 'Open' Host
Controller (OHCI) Driver
Jul 2 08:46:09 zumbi kernel: [ 41.623866] ohci_hcd: block sizes: ed 80 td 96
Jul 2 08:46:09 zumbi kernel: [ 41.623894] uhci_hcd: USB Universal Host
Controller Interface driver
Jul 2 08:46:09 zumbi kernel: [ 41.624739] uhci_hcd 0000:00:1a.0: PCI INT A
-> GSI 16 (level, low) -> IRQ 16
Jul 2 08:46:09 zumbi kernel: [ 41.625646] uhci_hcd 0000:00:1a.0: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.625648] uhci_hcd 0000:00:1a.0: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.626406]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '003'
Jul 2 08:46:09 zumbi kernel: [ 41.626442] uhci_hcd 0000:00:1a.0: new USB bus
registered, assigned bus number 3
Jul 2 08:46:09 zumbi kernel: [ 41.627592] uhci_hcd 0000:00:1a.0: detected 2
ports
Jul 2 08:46:09 zumbi kernel: [ 41.628296] uhci_hcd 0000:00:1a.0:
uhci_check_and_reset_hc: cmd = 0x0000
Jul 2 08:46:09 zumbi kernel: [ 41.628297] uhci_hcd 0000:00:1a.0: Performing
full reset
Jul 2 08:46:09 zumbi kernel: [ 41.628310] uhci_hcd 0000:00:1a.0: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.628313] uhci_hcd 0000:00:1a.0: irq 16, io
base 0x000050c0
Jul 2 08:46:09 zumbi kernel: [ 41.634420] usb usb3: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.634424] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0001
Jul 2 08:46:09 zumbi kernel: [ 41.635297] usb usb3: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.636426] usb usb3: Product: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.637127] usb usb3: Manufacturer: Linux
2.6.30-rc6-tip uhci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.637936] usb usb3: SerialNumber:
0000:00:1a.0
Jul 2 08:46:09 zumbi kernel: [ 41.638633] usb usb3: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.638654] usb usb3: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.638656] usb usb3: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.639424] usb usb3: adding 3-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.639436] usb 3-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.639458] hub 3-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.639459] hub 3-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.639460] hub 3-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.640065] hub 3-0:1.0: 2 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.640688] hub 3-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.640689] hub 3-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.640690] hub 3-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.640691] hub 3-0:1.0: power on to power
good time: 2ms
Jul 2 08:46:09 zumbi kernel: [ 41.640694] hub 3-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.640695] hub 3-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.640730]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.640777] alloc irq_desc for 21 on node -1
Jul 2 08:46:09 zumbi kernel: [ 41.640778] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 41.640781] uhci_hcd 0000:00:1a.1: PCI INT B
-> GSI 21 (level, low) -> IRQ 21
Jul 2 08:46:09 zumbi kernel: [ 41.641689] uhci_hcd 0000:00:1a.1: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.641691] uhci_hcd 0000:00:1a.1: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.642449]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '004'
Jul 2 08:46:09 zumbi kernel: [ 41.642480] uhci_hcd 0000:00:1a.1: new USB bus
registered, assigned bus number 4
Jul 2 08:46:09 zumbi kernel: [ 41.643629] uhci_hcd 0000:00:1a.1: detected 2
ports
Jul 2 08:46:09 zumbi kernel: [ 41.644333] uhci_hcd 0000:00:1a.1:
uhci_check_and_reset_hc: cmd = 0x0000
Jul 2 08:46:09 zumbi kernel: [ 41.644335] uhci_hcd 0000:00:1a.1: Performing
full reset
Jul 2 08:46:09 zumbi kernel: [ 41.644347] uhci_hcd 0000:00:1a.1: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.644356] uhci_hcd 0000:00:1a.1: irq 21, io
base 0x000050a0
Jul 2 08:46:09 zumbi kernel: [ 41.645152] usb usb4: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.645156] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0001
Jul 2 08:46:09 zumbi kernel: [ 41.646028] usb usb4: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.647157] usb usb4: Product: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.647856] usb usb4: Manufacturer: Linux
2.6.30-rc6-tip uhci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.648665] usb usb4: SerialNumber:
0000:00:1a.1
Jul 2 08:46:09 zumbi kernel: [ 41.649364] usb usb4: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.649385] usb usb4: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.649387] usb usb4: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.650152] usb usb4: adding 4-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.650160] usb 4-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.650182] hub 4-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.650183] hub 4-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.650184] hub 4-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.650787] hub 4-0:1.0: 2 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.651412] hub 4-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.651413] hub 4-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.651414] hub 4-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.651415] hub 4-0:1.0: power on to power
good time: 2ms
Jul 2 08:46:09 zumbi kernel: [ 41.651417] hub 4-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.651419] hub 4-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.651454]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.651501] uhci_hcd 0000:00:1a.2: PCI INT D
-> GSI 19 (level, low) -> IRQ 19
Jul 2 08:46:09 zumbi kernel: [ 41.652408] uhci_hcd 0000:00:1a.2: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.652410] uhci_hcd 0000:00:1a.2: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.653169]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '005'
Jul 2 08:46:09 zumbi kernel: [ 41.653203] uhci_hcd 0000:00:1a.2: new USB bus
registered, assigned bus number 5
Jul 2 08:46:09 zumbi kernel: [ 41.654353] uhci_hcd 0000:00:1a.2: detected 2
ports
Jul 2 08:46:09 zumbi kernel: [ 41.655056] uhci_hcd 0000:00:1a.2:
uhci_check_and_reset_hc: cmd = 0x0000
Jul 2 08:46:09 zumbi kernel: [ 41.655058] uhci_hcd 0000:00:1a.2: Performing
full reset
Jul 2 08:46:09 zumbi kernel: [ 41.655070] uhci_hcd 0000:00:1a.2: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.655073] uhci_hcd 0000:00:1a.2: irq 19, io
base 0x00005080
Jul 2 08:46:09 zumbi kernel: [ 41.655869] usb usb5: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.655873] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0001
Jul 2 08:46:09 zumbi kernel: [ 41.656744] usb usb5: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.657874] usb usb5: Product: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.658574] usb usb5: Manufacturer: Linux
2.6.30-rc6-tip uhci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.659384] usb usb5: SerialNumber:
0000:00:1a.2
Jul 2 08:46:09 zumbi kernel: [ 41.660080] usb usb5: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.660102] usb usb5: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.660103] usb usb5: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.660871] usb usb5: adding 5-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.660879] usb 5-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.660900] hub 5-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.660902] hub 5-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.660903] hub 5-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.661505] hub 5-0:1.0: 2 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.662130] hub 5-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.662131] hub 5-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.662132] hub 5-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.662134] hub 5-0:1.0: power on to power
good time: 2ms
Jul 2 08:46:09 zumbi kernel: [ 41.662136] hub 5-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.662137] hub 5-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.662173]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.662219] uhci_hcd 0000:00:1d.0: PCI INT A
-> GSI 23 (level, low) -> IRQ 23
Jul 2 08:46:09 zumbi kernel: [ 41.663126] uhci_hcd 0000:00:1d.0: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.663129] uhci_hcd 0000:00:1d.0: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.663890]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '006'
Jul 2 08:46:09 zumbi kernel: [ 41.663922] uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 6
Jul 2 08:46:09 zumbi kernel: [ 41.665072] uhci_hcd 0000:00:1d.0: detected 2
ports
Jul 2 08:46:09 zumbi kernel: [ 41.665773] uhci_hcd 0000:00:1d.0:
uhci_check_and_reset_hc: cmd = 0x0000
Jul 2 08:46:09 zumbi kernel: [ 41.665775] uhci_hcd 0000:00:1d.0: Performing
full reset
Jul 2 08:46:09 zumbi kernel: [ 41.665787] uhci_hcd 0000:00:1d.0: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.665790] uhci_hcd 0000:00:1d.0: irq 23, io
base 0x00005060
Jul 2 08:46:09 zumbi kernel: [ 41.666586] usb usb6: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.666590] usb usb6: New USB device found,
idVendor=1d6b, idProduct=0001
Jul 2 08:46:09 zumbi kernel: [ 41.667463] usb usb6: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.668591] usb usb6: Product: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.669292] usb usb6: Manufacturer: Linux
2.6.30-rc6-tip uhci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.670102] usb usb6: SerialNumber:
0000:00:1d.0
Jul 2 08:46:09 zumbi kernel: [ 41.670799] usb usb6: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.670821] usb usb6: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.670822] usb usb6: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.671588] usb usb6: adding 6-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.671597] usb 6-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.671619] hub 6-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.671620] hub 6-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.671621] hub 6-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.672226] hub 6-0:1.0: 2 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.672850] hub 6-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.672850] hub 6-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.672852] hub 6-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.672853] hub 6-0:1.0: power on to power
good time: 2ms
Jul 2 08:46:09 zumbi kernel: [ 41.672855] hub 6-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.672858] hub 6-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.672893]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.672939] uhci_hcd 0000:00:1d.1: PCI INT B
-> GSI 19 (level, low) -> IRQ 19
Jul 2 08:46:09 zumbi kernel: [ 41.673842] uhci_hcd 0000:00:1d.1: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.673845] uhci_hcd 0000:00:1d.1: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.674605]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '007'
Jul 2 08:46:09 zumbi kernel: [ 41.674638] uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 7
Jul 2 08:46:09 zumbi kernel: [ 41.675788] uhci_hcd 0000:00:1d.1: detected 2
ports
Jul 2 08:46:09 zumbi kernel: [ 41.676491] uhci_hcd 0000:00:1d.1:
uhci_check_and_reset_hc: cmd = 0x0000
Jul 2 08:46:09 zumbi kernel: [ 41.676493] uhci_hcd 0000:00:1d.1: Performing
full reset
Jul 2 08:46:09 zumbi kernel: [ 41.676505] uhci_hcd 0000:00:1d.1: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.676508] uhci_hcd 0000:00:1d.1: irq 19, io
base 0x00005040
Jul 2 08:46:09 zumbi kernel: [ 41.677305] usb usb7: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.677309] usb usb7: New USB device found,
idVendor=1d6b, idProduct=0001
Jul 2 08:46:09 zumbi kernel: [ 41.678182] usb usb7: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.679309] usb usb7: Product: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.680011] usb usb7: Manufacturer: Linux
2.6.30-rc6-tip uhci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.680818] usb usb7: SerialNumber:
0000:00:1d.1
Jul 2 08:46:09 zumbi kernel: [ 41.681518] usb usb7: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.681539] usb usb7: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.681541] usb usb7: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.682307] usb usb7: adding 7-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.682316] usb 7-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.682337] hub 7-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.682339] hub 7-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.682340] hub 7-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.682944] hub 7-0:1.0: 2 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.683568] hub 7-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.683569] hub 7-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.683570] hub 7-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.683571] hub 7-0:1.0: power on to power
good time: 2ms
Jul 2 08:46:09 zumbi kernel: [ 41.683573] hub 7-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.683574] hub 7-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.683609]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.683658] uhci_hcd 0000:00:1d.2: PCI INT C
-> GSI 18 (level, low) -> IRQ 18
Jul 2 08:46:09 zumbi kernel: [ 41.684565] uhci_hcd 0000:00:1d.2: setting
latency timer to 64
Jul 2 08:46:09 zumbi kernel: [ 41.684568] uhci_hcd 0000:00:1d.2: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.685326]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '008'
Jul 2 08:46:09 zumbi kernel: [ 41.685362] uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 8
Jul 2 08:46:09 zumbi kernel: [ 41.686511] uhci_hcd 0000:00:1d.2: detected 2
ports
Jul 2 08:46:09 zumbi kernel: [ 41.687215] uhci_hcd 0000:00:1d.2:
uhci_check_and_reset_hc: cmd = 0x0000
Jul 2 08:46:09 zumbi kernel: [ 41.687216] uhci_hcd 0000:00:1d.2: Performing
full reset
Jul 2 08:46:09 zumbi kernel: [ 41.687229] uhci_hcd 0000:00:1d.2: supports
USB remote wakeup
Jul 2 08:46:09 zumbi kernel: [ 41.687232] uhci_hcd 0000:00:1d.2: irq 18, io
base 0x00005020
Jul 2 08:46:09 zumbi kernel: [ 41.688028] usb usb8: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 41.688032] usb usb8: New USB device found,
idVendor=1d6b, idProduct=0001
Jul 2 08:46:09 zumbi kernel: [ 41.688905] usb usb8: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Jul 2 08:46:09 zumbi kernel: [ 41.690035] usb usb8: Product: UHCI Host
Controller
Jul 2 08:46:09 zumbi kernel: [ 41.690732] usb usb8: Manufacturer: Linux
2.6.30-rc6-tip uhci_hcd
Jul 2 08:46:09 zumbi kernel: [ 41.691542] usb usb8: SerialNumber:
0000:00:1d.2
Jul 2 08:46:09 zumbi kernel: [ 41.692240] usb usb8: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.692261] usb usb8: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 41.692263] usb usb8: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 41.693031] usb usb8: adding 8-0:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 41.693039] usb 8-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.693061] hub 8-0:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 41.693062] hub 8-0:1.0: usb_probe_interface -
got id
Jul 2 08:46:09 zumbi kernel: [ 41.693063] hub 8-0:1.0: USB hub found
Jul 2 08:46:09 zumbi kernel: [ 41.693669] hub 8-0:1.0: 2 ports detected
Jul 2 08:46:09 zumbi kernel: [ 41.694293] hub 8-0:1.0: standalone hub
Jul 2 08:46:09 zumbi kernel: [ 41.694294] hub 8-0:1.0: no power switching
(usb 1.0)
Jul 2 08:46:09 zumbi kernel: [ 41.694295] hub 8-0:1.0: individual port
over-current protection
Jul 2 08:46:09 zumbi kernel: [ 41.694296] hub 8-0:1.0: power on to power
good time: 2ms
Jul 2 08:46:09 zumbi kernel: [ 41.694298] hub 8-0:1.0: local power source is
good
Jul 2 08:46:09 zumbi kernel: [ 41.694300] hub 8-0:1.0: trying to enable port
power on non-switchable hub
Jul 2 08:46:09 zumbi kernel: [ 41.694335]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
Jul 2 08:46:09 zumbi kernel: [ 41.694423] usbcore: registered new interface
driver usblp
Jul 2 08:46:09 zumbi kernel: [ 41.695181] Initializing USB Mass Storage
driver...
Jul 2 08:46:09 zumbi kernel: [ 41.695922] usbcore: registered new interface
driver usb-storage
Jul 2 08:46:09 zumbi kernel: [ 41.696723] USB Mass Storage support
registered.
Jul 2 08:46:09 zumbi kernel: [ 41.697438] usbcore: registered new interface
driver libusual
Jul 2 08:46:09 zumbi kernel: [ 41.698243] hub 1-0:1.0: state 7 ports 6 chg
0000 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 41.698299] PNP: No PS/2 controller found.
Probing ports directly.
Jul 2 08:46:09 zumbi kernel: [ 41.701891] serio: i8042 KBD port at 0x60,0x64
irq 1
Jul 2 08:46:09 zumbi kernel: [ 41.702604] serio: i8042 AUX port at 0x60,0x64
irq 12
Jul 2 08:46:09 zumbi kernel: [ 41.703387] mice: PS/2 mouse device common for
all mice
Jul 2 08:46:09 zumbi kernel: [ 41.704298] rtc_cmos 00:02: RTC can wake from
S4
Jul 2 08:46:09 zumbi kernel: [ 41.705010] rtc_cmos 00:02: rtc core:
registered rtc_cmos as rtc0
Jul 2 08:46:09 zumbi kernel: [ 41.705840] rtc0: alarms up to one month, y3k,
114 bytes nvram, hpet irqs
Jul 2 08:46:09 zumbi kernel: [ 41.706740] i801_smbus 0000:00:1f.3: PCI INT B
-> GSI 18 (level, low) -> IRQ 18
Jul 2 08:46:09 zumbi kernel: [ 41.708022] device-mapper: ioctl: 4.14.0-ioctl
(2008-04-23) initialised: dm-devel@xxxxxxxxxx
Jul 2 08:46:09 zumbi kernel: [ 41.709996] cpuidle: using governor ladder
Jul 2 08:46:09 zumbi kernel: [ 41.711819] cpuidle: using governor menu
Jul 2 08:46:09 zumbi kernel: [ 41.713015] usbcore: registered new interface
driver hiddev
Jul 2 08:46:09 zumbi kernel: [ 41.713807] usbcore: registered new interface
driver usbhid
Jul 2 08:46:09 zumbi kernel: [ 41.714620] usbhid: v2.6:USB HID core driver
Jul 2 08:46:09 zumbi kernel: [ 41.715445] Advanced Linux Sound Architecture
Driver Version 1.0.20.
Jul 2 08:46:09 zumbi kernel: [ 41.718563] ALSA device list:
Jul 2 08:46:09 zumbi kernel: [ 41.719146] No soundcards found.
Jul 2 08:46:09 zumbi kernel: [ 41.719737] Netfilter messages via NETLINK
v0.30.
Jul 2 08:46:09 zumbi kernel: [ 41.720485] nf_conntrack version 0.5.0 (16384
buckets, 65536 max)
Jul 2 08:46:09 zumbi kernel: [ 41.721721] ctnetlink v0.93: registering with
nfnetlink.
Jul 2 08:46:09 zumbi kernel: [ 41.721852] ehci_hcd 0000:00:1d.7: GetStatus
port 1 status 001403 POWER sig=k CSC CONNECT
Jul 2 08:46:09 zumbi kernel: [ 41.721854] hub 2-0:1.0: port 1: status 0501
change 0001
Jul 2 08:46:09 zumbi kernel: [ 41.721860] ehci_hcd 0000:00:1d.7: GetStatus
port 2 status 001403 POWER sig=k CSC CONNECT
Jul 2 08:46:09 zumbi kernel: [ 41.721862] hub 2-0:1.0: port 2: status 0501
change 0001
Jul 2 08:46:09 zumbi kernel: [ 41.722875] ip_tables: (C) 2000-2006 Netfilter
Core Team
Jul 2 08:46:09 zumbi kernel: [ 41.723703] TCP cubic registered
Jul 2 08:46:09 zumbi kernel: [ 41.724333] Initializing XFRM netlink socket
Jul 2 08:46:09 zumbi kernel: [ 41.725558] NET: Registered protocol family 10
Jul 2 08:46:09 zumbi kernel: [ 41.727058] ip6_tables: (C) 2000-2006
Netfilter Core Team
Jul 2 08:46:09 zumbi kernel: [ 41.727882] IPv6 over IPv4 tunneling driver
Jul 2 08:46:09 zumbi kernel: [ 41.729304] NET: Registered protocol family 17
Jul 2 08:46:09 zumbi kernel: [ 41.730609] RPC: Registered udp transport
module.
Jul 2 08:46:09 zumbi kernel: [ 41.731348] RPC: Registered tcp transport
module.
Jul 2 08:46:09 zumbi kernel: [ 41.734862] PM: Resume from disk failed.
Jul 2 08:46:09 zumbi kernel: [ 41.734870] registered taskstats version 1
Jul 2 08:46:09 zumbi kernel: [ 41.735670] Magic number: 1:132:773
Jul 2 08:46:09 zumbi kernel: [ 41.736329] hub 2-0:1.0: hash matches
Jul 2 08:46:09 zumbi kernel: [ 41.737044] Freeing unused kernel memory: 504k
freed
Jul 2 08:46:09 zumbi kernel: [ 41.737864] Write protecting the kernel
read-only data: 7936k
Jul 2 08:46:09 zumbi kernel: [ 41.739858] hub 3-0:1.0: state 7 ports 2 chg
0000 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 41.750951] hub 4-0:1.0: state 7 ports 2 chg
0000 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 41.761960] hub 5-0:1.0: state 7 ports 2 chg
0000 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 41.773157] uhci_hcd 0000:00:1d.0: port 1
portsc 008a,00
Jul 2 08:46:09 zumbi kernel: [ 41.773168] uhci_hcd 0000:00:1d.0: port 2
portsc 008a,00
Jul 2 08:46:09 zumbi kernel: [ 41.782942] hub 7-0:1.0: state 7 ports 2 chg
0000 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 41.793968] hub 8-0:1.0: state 7 ports 2 chg
0000 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 41.798826] console_setup used greatest stack
depth: 5552 bytes left
Jul 2 08:46:09 zumbi kernel: [ 41.822868] hub 2-0:1.0: state 7 ports 6 chg
0006 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 41.822877] hub 2-0:1.0: port 1, status 0501,
change 0000, 480 Mb/s
Jul 2 08:46:09 zumbi kernel: [ 41.822885] ehci_hcd 0000:00:1d.7: port 1 low
speed --> companion
Jul 2 08:46:09 zumbi kernel: [ 41.824006] usb usb3: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824018] usb 3-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824077] usb usb4: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824087] usb 4-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824140] usb usb5: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824151] usb 5-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824232] usb usb1: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824249] usb 1-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824543] usb usb6: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824554] usb 6-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824608] usb usb7: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824619] usb 7-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824673] usb usb8: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824684] usb 8-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824737] usb usb2: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.824747] usb 2-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 41.875188] ehci_hcd 0000:00:1d.7: GetStatus
port 1 status 003002 POWER OWNER sig=se0 CSC
Jul 2 08:46:09 zumbi kernel: [ 41.875207] hub 2-0:1.0: port 2, status 0501,
change 0000, 480 Mb/s
Jul 2 08:46:09 zumbi kernel: [ 41.875213] ehci_hcd 0000:00:1d.7: port 2 low
speed --> companion
Jul 2 08:46:09 zumbi kernel: [ 41.884995] scsi_id used greatest stack depth:
5504 bytes left
Jul 2 08:46:09 zumbi kernel: [ 41.924189] vol_id used greatest stack depth:
5456 bytes left
Jul 2 08:46:09 zumbi kernel: [ 41.927099] ehci_hcd 0000:00:1d.7: GetStatus
port 2 status 003002 POWER OWNER sig=se0 CSC
Jul 2 08:46:09 zumbi kernel: [ 41.927117] hub 2-0:1.0: state 7 ports 6 chg
0000 evt 0004
Jul 2 08:46:09 zumbi kernel: [ 41.927122] hub 6-0:1.0: state 7 ports 2 chg
0000 evt 0002
Jul 2 08:46:09 zumbi kernel: [ 41.927128] uhci_hcd 0000:00:1d.0: port 1
portsc 01a3,00
Jul 2 08:46:09 zumbi kernel: [ 41.927133] hub 6-0:1.0: port 1, status 0301,
change 0001, 1.5 Mb/s
Jul 2 08:46:09 zumbi kernel: [ 41.932482] scsi_id used greatest stack depth:
5040 bytes left
Jul 2 08:46:09 zumbi kernel: [ 42.029858] hub 6-0:1.0: debounce: port 1:
total 100ms stable 100ms status 0x301
Jul 2 08:46:09 zumbi kernel: [ 42.061474] PM: Starting manual resume from
disk
Jul 2 08:46:09 zumbi kernel: [ 42.062355] PM: Resume from partition 8:5
Jul 2 08:46:09 zumbi kernel: [ 42.062356] PM: Checking hibernation image.
Jul 2 08:46:09 zumbi kernel: [ 42.062685] PM: Resume from disk failed.
Jul 2 08:46:09 zumbi kernel: [ 42.110318] kjournald starting. Commit
interval 5 seconds
Jul 2 08:46:09 zumbi kernel: [ 42.110333] EXT3-fs: mounted filesystem with
writeback data mode.
Jul 2 08:46:09 zumbi kernel: [ 42.131828] usb 6-1: new low speed USB device
using uhci_hcd and address 2
Jul 2 08:46:09 zumbi kernel: [ 42.274511] usb 6-1: skipped 1 descriptor
after interface
Jul 2 08:46:09 zumbi kernel: [ 42.279514] usb 6-1: default language 0x0409
Jul 2 08:46:09 zumbi kernel: [ 42.296511] usb 6-1: New USB device found,
idVendor=045e, idProduct=0083
Jul 2 08:46:09 zumbi kernel: [ 42.297431] usb 6-1: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Jul 2 08:46:09 zumbi kernel: [ 42.298367] usb 6-1: Product: Basic Optical
Mouse
Jul 2 08:46:09 zumbi kernel: [ 42.299078] usb 6-1: Manufacturer: Microsoft
Jul 2 08:46:09 zumbi kernel: [ 42.299803] usb 6-1: uevent
Jul 2 08:46:09 zumbi kernel: [ 42.299812] usb 6-1: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 42.299814] usb 6-1: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 42.303511] usb 6-1: adding 6-1:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 42.303534] usb 6-1:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 42.303559] usbhid 6-1:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 42.303561] usbhid 6-1:1.0:
usb_probe_interface - got id
Jul 2 08:46:09 zumbi kernel: [ 42.316634] input: Microsoft Basic Optical
Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input3
Jul 2 08:46:09 zumbi kernel: [ 42.318129] generic-usb 0003:045E:0083.0001:
input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on
usb-0000:00:1d.0-1/input0
Jul 2 08:46:09 zumbi kernel: [ 42.319807]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '002'
Jul 2 08:46:09 zumbi kernel: [ 42.319833] uhci_hcd 0000:00:1d.0: port 2
portsc 01a3,00
Jul 2 08:46:09 zumbi kernel: [ 42.319838] hub 6-0:1.0: port 2, status 0301,
change 0001, 1.5 Mb/s
Jul 2 08:46:09 zumbi kernel: [ 42.423756] hub 6-0:1.0: debounce: port 2:
total 100ms stable 100ms status 0x301
Jul 2 08:46:09 zumbi kernel: [ 42.525672] usb 6-2: new low speed USB device
using uhci_hcd and address 3
Jul 2 08:46:09 zumbi kernel: [ 42.573213] runlevel used greatest stack
depth: 4360 bytes left
Jul 2 08:46:09 zumbi kernel: [ 42.671428] usb 6-2: skipped 1 descriptor
after interface
Jul 2 08:46:09 zumbi kernel: [ 42.671432] usb 6-2: skipped 1 descriptor
after interface
Jul 2 08:46:09 zumbi kernel: [ 42.671436] usb 6-2: New USB device found,
idVendor=0566, idProduct=3002
Jul 2 08:46:09 zumbi kernel: [ 42.672367] usb 6-2: New USB device strings:
Mfr=0, Product=0, SerialNumber=0
Jul 2 08:46:09 zumbi kernel: [ 42.673378] usb 6-2: uevent
Jul 2 08:46:09 zumbi kernel: [ 42.673386] usb 6-2: usb_probe_device
Jul 2 08:46:09 zumbi kernel: [ 42.673387] usb 6-2: configuration #1 chosen
from 1 choice
Jul 2 08:46:09 zumbi kernel: [ 42.676427] usb 6-2: adding 6-2:1.0 (config
#1, interface 0)
Jul 2 08:46:09 zumbi kernel: [ 42.676450] usb 6-2:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 42.676474] usbhid 6-2:1.0: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 42.676476] usbhid 6-2:1.0:
usb_probe_interface - got id
Jul 2 08:46:09 zumbi kernel: [ 42.689564] input: HID 0566:3002 as
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input4
Jul 2 08:46:09 zumbi kernel: [ 42.690910] uhci_hcd 0000:00:1d.0: reserve dev
3 ep81-INT, period 8, phase 4, 118 us
Jul 2 08:46:09 zumbi kernel: [ 42.690940] generic-usb 0003:0566:3002.0002:
input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3002] on
usb-0000:00:1d.0-2/input0
Jul 2 08:46:09 zumbi kernel: [ 42.692496] usb 6-2: adding 6-2:1.1 (config
#1, interface 1)
Jul 2 08:46:09 zumbi kernel: [ 42.692506] usb 6-2:1.1: uevent
Jul 2 08:46:09 zumbi kernel: [ 42.692518] usbhid 6-2:1.1: usb_probe_interface
Jul 2 08:46:09 zumbi kernel: [ 42.692519] usbhid 6-2:1.1:
usb_probe_interface - got id
Jul 2 08:46:09 zumbi kernel: [ 42.728554] input: HID 0566:3002 as
/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input5
Jul 2 08:46:09 zumbi kernel: [ 42.735232] uhci_hcd 0000:00:1d.0: reserve dev
3 ep82-INT, period 8, phase 4, 93 us
Jul 2 08:46:09 zumbi kernel: [ 42.735251]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/file.c:
looking for a minor, starting at 96
Jul 2 08:46:09 zumbi kernel: [ 42.735282] generic-usb 0003:0566:3002.0003:
input,hiddev96,hidraw2: USB HID v1.10 Device [HID 0566:3002] on
usb-0000:00:1d.0-2/input1
Jul 2 08:46:09 zumbi kernel: [ 42.736904]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '003'
Jul 2 08:46:09 zumbi kernel: [ 42.736928] hub 6-0:1.0: state 7 ports 2 chg
0000 evt 0000
Jul 2 08:46:09 zumbi kernel: [ 42.774584] usb usb3: suspend_rh (auto-stop)
Jul 2 08:46:09 zumbi kernel: [ 42.774606] usb usb4: suspend_rh (auto-stop)
Jul 2 08:46:09 zumbi kernel: [ 42.774627] usb usb5: suspend_rh (auto-stop)
Jul 2 08:46:09 zumbi kernel: [ 42.774647] usb usb7: suspend_rh (auto-stop)
Jul 2 08:46:09 zumbi kernel: [ 42.774667] usb usb8: suspend_rh (auto-stop)
Jul 2 08:46:09 zumbi kernel: [ 44.009212] hub 1-0:1.0: hub_suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009221] usb usb1: bus auto-suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009223] ehci_hcd 0000:00:1a.7: suspend
root hub
Jul 2 08:46:09 zumbi kernel: [ 44.009245] hub 3-0:1.0: hub_suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009249] usb usb3: bus auto-suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009251] usb usb3: suspend_rh
Jul 2 08:46:09 zumbi kernel: [ 44.009266] hub 4-0:1.0: hub_suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009269] usb usb4: bus auto-suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009271] usb usb4: suspend_rh
Jul 2 08:46:09 zumbi kernel: [ 44.009286] hub 5-0:1.0: hub_suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009288] usb usb5: bus auto-suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009290] usb usb5: suspend_rh
Jul 2 08:46:09 zumbi kernel: [ 44.009302] hub 7-0:1.0: hub_suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009304] usb usb7: bus auto-suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009305] usb usb7: suspend_rh
Jul 2 08:46:09 zumbi kernel: [ 44.009318] hub 8-0:1.0: hub_suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009319] usb usb8: bus auto-suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009321] usb usb8: suspend_rh
Jul 2 08:46:09 zumbi kernel: [ 44.009333] hub 2-0:1.0: hub_suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009335] usb usb2: bus auto-suspend
Jul 2 08:46:09 zumbi kernel: [ 44.009336] ehci_hcd 0000:00:1d.7: suspend
root hub
Jul 2 08:46:09 zumbi kernel: [ 46.852921] udevd version 124 started
Jul 2 08:46:09 zumbi kernel: [ 46.852954] udevd used greatest stack depth:
4288 bytes left
Jul 2 08:46:09 zumbi kernel: [ 46.875784] usb usb3: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.875817] usb 3-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.875982] usb usb4: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.876016] usb 4-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.876176] usb usb5: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.876197] usb 5-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.876344] usb usb1: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.876377] usb 1-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.876959] usb usb6: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.876979] usb 6-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877018] usb 6-1: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877031] usb 6-1:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877156] usb 6-2: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877169] usb 6-2:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877256] usb 6-2:1.1: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877453] usb usb7: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877465] usb 7-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877536] usb usb8: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877547] usb 8-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877634] usb usb2: uevent
Jul 2 08:46:09 zumbi kernel: [ 46.877666] usb 2-0:1.0: uevent
Jul 2 08:46:09 zumbi kernel: [ 47.772060] Adding 11847896k swap on
/dev/sda5. Priority:-1 extents:1 across:11847896k
Jul 2 08:46:09 zumbi kernel: [ 48.115785] EXT3 FS on sda1, internal journal
Jul 2 08:46:09 zumbi kernel: [ 48.505539] tg3 0000:08:00.0: PME# disabled
Jul 2 08:46:09 zumbi kernel: [ 48.506007] alloc irq_desc for 30 on node -1
Jul 2 08:46:09 zumbi kernel: [ 48.506009] alloc kstat_irqs on node -1
Jul 2 08:46:09 zumbi kernel: [ 48.506065] tg3 0000:08:00.0: irq 30 for
MSI/MSI-X
Jul 2 08:46:09 zumbi kernel: [ 48.593804] ADDRCONF(NETDEV_UP): eth0: link is
not ready
Jul 2 08:46:09 zumbi kernel: [ 51.605980] tg3: eth0: Link is up at 1000
Mbps, full duplex.
Jul 2 08:46:09 zumbi kernel: [ 51.605982] tg3: eth0: Flow control is off for
TX and off for RX.
Jul 2 08:46:09 zumbi kernel: [ 51.606459] ADDRCONF(NETDEV_CHANGE): eth0:
link becomes ready
Jul 2 08:46:09 zumbi kernel: [ 57.214830] svc: failed to register lockdv1
RPC service (errno 97).
Jul 2 08:46:09 zumbi kernel: [ 57.216647] mount.nfs used greatest stack
depth: 3328 bytes left
Jul 2 08:46:09 zumbi kernel: [ 58.606949] warning: `avahi-daemon' uses
32-bit capabilities (legacy support in use)
Jul 2 08:46:13 zumbi kernel: [ 62.325297] eth0: no IPv6 routers present
__ __ _____ ____ _ _ _
\ \/ /___ _ __ |___ / | ___| _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \ |___ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) | ___) |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_)____/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.5-unstable (t_patrickco@xxxxxxxxxxxxxxxx) (gcc version
4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) Wed Jul 1 09:04:26 BST 2009
(XEN) Latest ChangeSet: Wed Jun 24 11:47:04 2009 +0100 19822:e904a8601aff
(XEN) Command line: dom0_mem=768M dom0_max_vcpus=1 loglvl=all guest_loglvl=all
com1=115200/921600,8n1,0x1000,0 console=com1,vga
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 000000000009ec00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000009cf88000 (usable)
(XEN) 000000009cf88000 - 000000009d106000 (ACPI NVS)
(XEN) 000000009d106000 - 000000009f6bd000 (usable)
(XEN) 000000009f6bd000 - 000000009f6bf000 (reserved)
(XEN) 000000009f6bf000 - 000000009f714000 (usable)
(XEN) 000000009f714000 - 000000009f7bf000 (ACPI NVS)
(XEN) 000000009f7bf000 - 000000009f7e1000 (usable)
(XEN) 000000009f7e1000 - 000000009f7ff000 (ACPI data)
(XEN) 000000009f7ff000 - 000000009f800000 (usable)
(XEN) 000000009f800000 - 00000000b0000000 (reserved)
(XEN) 00000000fc000000 - 00000000fd000000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000160000000 (usable)
(XEN) System RAM: 4085MB (4183380kB)
(XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL )
(XEN) ACPI: XSDT 9F7FE120, 006C (r1 INTEL DX58SO 493 1000013)
(XEN) ACPI: FACP 9F7FD000, 00F4 (r3 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI Warning (tbfadt-0444): Optional field "Pm2ControlBlock" has zero
address or length: 0000000000000450/0 [20070126]
(XEN) ACPI: DSDT 9F7F8000, 43A2 (r2 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI: FACS 9F727000, 0040
(XEN) ACPI: APIC 9F7F7000, 0138 (r2 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI: WDDT 9F7F6000, 0040 (r1 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI: MCFG 9F7F5000, 003C (r1 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI: ASF! 9F7F4000, 00AC (r32 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI: SSDT 9F7E3000, E134 (r1 INTEL SSDT PM 493 MSFT 100000D)
(XEN) ACPI: DMAR 9F7E1000, 0110 (r1 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI: WDTT 9F7F2000, 0164 (r1 INTEL DX58SO 493 MSFT 100000D)
(XEN) ACPI: ASPT 9F7F3000, 0034 (r4 INTEL PerfTune 493 MSFT 100000D)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-0000000160000000
(XEN) Domain heap initialised
(XEN) DMI 2.5 present.
(XEN) Using APIC driver x2apic
(XEN) x2APIC mode enabled.
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI: wakeup_vec[9f72700c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
(XEN) Processor #1 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
(XEN) Processor #3 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x05] enabled)
(XEN) Processor #5 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x07] enabled)
(XEN) Processor #7 7:10 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) PCI: MCFG configuration 0: base a0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at a0000000 reserved in E820
(XEN) amk_mcfg_ioremap: PCI_MCFG_VIRT_START ffff808000000000
(XEN) amk_mcfg_ioremap: start_bus 0 end_bus ff
(XEN) amk_mcfg_ioremap: virt ffff808000000000 mfn = a0000 size ff00000
(XEN) amk_mcfg_ioremap: PCI_MCFG_VIRT_START ffff808000000000
(XEN) amk_mcfg_ioremap: virt ffff808000000000 size ff00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2933.568 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) mce_init: init bank0
(XEN) mce_init: init bank1
(XEN) CPU0: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU0
(XEN) CMCI: CPU0 owner_map[16c], no_cmci_map[93]
(XEN) CPU0: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Booting processor 1/2 eip 8c000
(XEN) Initializing CPU#1
(XEN) x2APIC mode enabled.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) mce_init: init bank1
(XEN) CPU1: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU1
(XEN) CMCI: CPU1 owner_map[2c], no_cmci_map[93]
(XEN) CPU1: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Booting processor 2/4 eip 8c000
(XEN) Initializing CPU#2
(XEN) x2APIC mode enabled.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) mce_init: init bank1
(XEN) CPU2: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU2
(XEN) CMCI: CPU2 owner_map[2c], no_cmci_map[93]
(XEN) CPU2: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Booting processor 3/6 eip 8c000
(XEN) Initializing CPU#3
(XEN) x2APIC mode enabled.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) mce_init: init bank1
(XEN) CPU3: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU3
(XEN) CMCI: CPU3 owner_map[2c], no_cmci_map[93]
(XEN) CPU3: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Booting processor 4/1 eip 8c000
(XEN) Initializing CPU#4
(XEN) x2APIC mode enabled.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) mce_init: init bank1
(XEN) CPU4: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU4
(XEN) CMCI: CPU4 owner_map[0], no_cmci_map[93]
(XEN) CPU4: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Booting processor 5/3 eip 8c000
(XEN) Initializing CPU#5
(XEN) x2APIC mode enabled.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) mce_init: init bank1
(XEN) CPU5: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU5
(XEN) CMCI: CPU5 owner_map[0], no_cmci_map[93]
(XEN) CPU5: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Booting processor 6/5 eip 8c000
(XEN) Initializing CPU#6
(XEN) x2APIC mode enabled.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) mce_init: init bank1
(XEN) CPU6: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU6
(XEN) CMCI: CPU6 owner_map[0], no_cmci_map[93]
(XEN) CPU6: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Booting processor 7/7 eip 8c000
(XEN) Initializing CPU#7
(XEN) x2APIC mode enabled.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) mce_init: init bank1
(XEN) CPU7: Thermal monitoring enabled (TM1)
(XEN) CMCI: find owner on CPU7
(XEN) CMCI: CPU7 owner_map[0], no_cmci_map[93]
(XEN) CPU7: Intel Genuine Intel(R) CPU @ 0000 @ 2.93GHz stepping 02
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) Brought up 8 CPUs
(XEN) I/O virtualisation disabled
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x7c9000
(XEN) elf_parse_binary: phdr: paddr=0x17c9000 memsz=0xdab78
(XEN) elf_parse_binary: phdr: paddr=0x18a4000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x18a6000 memsz=0x75200
(XEN) elf_parse_binary: phdr: paddr=0x191c000 memsz=0x146a0
(XEN) elf_parse_binary: phdr: paddr=0x1931000 memsz=0x132000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1a63000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff818b3200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81a63000
(XEN) virt_entry = 0xffffffff818b3200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a63000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000158000000->000000015c000000 (180224 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81a63000
(XEN) Init. ramdisk: ffffffff81a63000->ffffffff82491800
(XEN) Phys-Mach map: ffffffff82492000->ffffffff82612000
(XEN) Start info: ffffffff82612000->ffffffff826124b4
(XEN) Page tables: ffffffff82613000->ffffffff8262a000
(XEN) Boot stack: ffffffff8262a000->ffffffff8262b000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff818b3200
(XEN) Dom0 has maximum 1 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff817c9000
(XEN) elf_load_binary: phdr 1 at 0xffffffff817c9000 -> 0xffffffff818a3b78
(XEN) elf_load_binary: phdr 2 at 0xffffffff818a4000 -> 0xffffffff818a4888
(XEN) elf_load_binary: phdr 3 at 0xffffffff818a6000 -> 0xffffffff8191b200
(XEN) elf_load_binary: phdr 4 at 0xffffffff8191c000 -> 0xffffffff819306a0
(XEN) elf_load_binary: phdr 5 at 0xffffffff81931000 -> 0xffffffff81932000
(XEN) Scrubbing Free RAM: ................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 136kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] PAT disabled on Xen
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-rc6-tip (t_patrickco@waitaha) (gcc version
4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #5 SMP Fri Jun 26 16:33:19 BST 2009
[ 0.000000] Command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen
ignore_loglevel
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] Xen: 000000000009ec00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] Xen: 000000009cf88000 - 000000009d106000 (ACPI NVS)
[ 0.000000] Xen: 000000009f6bd000 - 000000009f6bf000 (reserved)
[ 0.000000] Xen: 000000009f714000 - 000000009f7bf000 (ACPI NVS)
[ 0.000000] Xen: 000000009f7e1000 - 000000009f7ff000 (ACPI data)
[ 0.000000] Xen: 000000009f800000 - 00000000b0000000 (reserved)
[ 0.000000] Xen: 00000000fc000000 - 00000000fd000000 (reserved)
[ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable)
==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009ec00 (usable)
[ 0.000000] modified: 000000000009ec00 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable)
[ 0.000000] modified: 000000009cf88000 - 000000009d106000 (ACPI NVS)
[ 0.000000] modified: 000000009f6bd000 - 000000009f6bf000 (reserved)
[ 0.000000] modified: 000000009f714000 - 000000009f7bf000 (ACPI NVS)
[ 0.000000] modified: 000000009f7e1000 - 000000009f7ff000 (ACPI data)
[ 0.000000] modified: 000000009f800000 - 00000000b0000000 (reserved)
[ 0.000000] modified: 00000000fc000000 - 00000000fd000000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000
[ 0.000000] 0000000000 - 0030000000 page 4k
[ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000
[ 0.000000] RAMDISK: 01a63000 - 02491800
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 000000009f7fe120 0006C (v01 INTEL DX58SO 00000493
01000013)
[ 0.000000] ACPI: FACP 000000009f7fd000 000F4 (v03 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI Warning (tbfadt-0562): Optional field Pm2ControlBlock has
zero address or length: 0000000000000450/0 [20090320]
[ 0.000000] ACPI Warning (tbfadt-0612): Invalid length for Pm2ControlBlock:
0, using default 8 [20090320]
[ 0.000000] ACPI: DSDT 000000009f7f8000 043A2 (v02 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI: FACS 000000009f727000 00040
[ 0.000000] ACPI: APIC 000000009f7f7000 00138 (v02 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI: WDDT 000000009f7f6000 00040 (v01 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI: MCFG 000000009f7f5000 0003C (v01 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI: ASF! 000000009f7f4000 000AC (v32 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI: SSDT 000000009f7e3000 0E134 (v01 INTEL SSDT PM 00000493
MSFT 0100000D)
[ 0.000000] ACPI: DMAR 000000009f7e1000 00110 (v01 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI: WDTT 000000009f7f2000 00164 (v01 INTEL DX58SO 00000493
MSFT 0100000D)
[ 0.000000] ACPI: ASPT 000000009f7f3000 00034 (v04 INTEL PerfTune 00000493
MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0030000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0002613000 - 000262a000] XEN PAGETABLES ==> [0002613000
- 000262a000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #3 [0001000000 - 0001a42e08] TEXT DATA BSS ==> [0001000000
- 0001a42e08]
[ 0.000000] #4 [0001a63000 - 0002491800] RAMDISK ==> [0001a63000
- 0002491800]
[ 0.000000] #5 [0002492000 - 0002613000] XEN START INFO ==> [0002492000
- 0002613000]
[ 0.000000] #6 [0001a43000 - 0001a430bc] BRK ==> [0001a43000
- 0001a430bc]
[ 0.000000] #7 [0000100000 - 0000268000] PGTABLE ==> [0000100000
- 0000268000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00030000
[ 0.000000] On node 0 totalpages: 196505
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 363 pages reserved
[ 0.000000] DMA zone: 3574 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 2632 pages used for memmap
[ 0.000000] DMA32 zone: 189880 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2119:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000000f0, new_entry=00010000
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
30000000:6cf88000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Allocated 21 4k pages, static data 83616 bytes
[ 1.334542] trying to map vcpu_info 0 at ffffc9000000b060, mfn 15a641,
offset 96
[ 1.344598] cpu 0 using vcpu_info at ffffc9000000b060
[ 1.354698] Xen: using vcpu_info placement
[ 1.362787] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 193454
[ 1.366820] Kernel command line: root=/dev/sda1 ro console=hvc0
earlyprintk=xen ignore_loglevel
[ 1.379391] Initializing CPU#0
[ 1.391081] Experimental hierarchical RCU implementation.
[ 1.397126] Experimental hierarchical RCU init done.
[ 1.405217] NR_IRQS:4352 nr_irqs:256
[ 1.411309] xen: registering gsi 0 triggering 1 polarity 0
[ 1.417341] xen: --> irq=0
[ 1.425419] xen_set_ioapic_routing: irq 0 gsi 0 vector 240 ioapic 0 pin 0
triggering 0 polarity 0
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0
(XEN) ioapic_guest_write: old_entry=00010000, new_entry=000000f0
(XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!
[ 1.429470] xen: registering gsi 1 triggering 1 polarity 0
[ 1.469866] xen: --> irq=1
[ 1.477946] xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1
triggering 0 polarity 0
[ 1.481989] xen: registering gsi 3 triggering 1 polarity 0
[ 1.494109] xen: --> irq=3
[ 1.502204] xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3
triggering 0 polarity 0
[ 1.506247] xen: registering gsi 4 triggering 1 polarity 0
[ 1.518367] xen: --> irq=4
[ 1.526447] xen_set_ioapic_routing: irq 4 gsi 4 vector 48 ioapic 0 pin 4
triggering 0 polarity 0
[ 1.530490] xen: registering gsi 5 triggering 1 polarity 0
[ 1.542610] xen: --> irq=5
[ 1.550691] xen_set_ioapic_routing: irq 5 gsi 5 vector 56 ioapic 0 pin 5
triggering 0 polarity 0
[ 1.554733] xen: registering gsi 6 triggering 1 polarity 0
[ 1.568874] xen: --> irq=6
[ 1.576954] xen_set_ioapic_routing: irq 6 gsi 6 vector 64 ioapic 0 pin 6
triggering 0 polarity 0
[ 1.580998] xen: registering gsi 7 triggering 1 polarity 0
[ 1.593117] xen: --> irq=7
[ 1.601212] xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
triggering 0 polarity 0
[ 1.605255] xen: registering gsi 8 triggering 1 polarity 0
[ 1.617375] xen: --> irq=8
[ 1.625455] xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
triggering 0 polarity 0
[ 1.629498] xen: registering gsi 9 triggering 0 polarity 0
[ 1.641618] xen: --> irq=9
[ 1.649698] xen_set_ioapic_routing: irq 9 gsi 9 vector 88 ioapic 0 pin 9
triggering 1 polarity 0
[ 1.653741] xen: registering gsi 10 triggering 1 polarity 0
[ 1.665861] xen: --> irq=10
[ 1.673942] xen_set_ioapic_routing: irq 10 gsi 10 vector 96 ioapic 0 pin 10
triggering 0 polarity 0
[ 1.677984] xen: registering gsi 11 triggering 1 polarity 0
[ 1.692125] xen: --> irq=11
[ 1.700220] xen_set_ioapic_routing: irq 11 gsi 11 vector 104 ioapic 0 pin 11
triggering 0 polarity 0
[ 1.704262] xen: registering gsi 12 triggering 1 polarity 0
[ 1.716383] xen: --> irq=12
[ 1.724463] xen_set_ioapic_routing: irq 12 gsi 12 vector 112 ioapic 0 pin 12
triggering 0 polarity 0
[ 1.728506] xen: registering gsi 13 triggering 1 polarity 0
[ 1.742646] xen: --> irq=13
[ 1.750727] xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
triggering 0 polarity 0
[ 1.754769] xen: registering gsi 14 triggering 1 polarity 0
[ 1.768910] xen: --> irq=14
[ 1.776990] xen_set_ioapic_routing: irq 14 gsi 14 vector 136 ioapic 0 pin 14
triggering 0 polarity 0
[ 1.781033] xen: registering gsi 15 triggering 1 polarity 0
[ 1.793154] xen: --> irq=15
[ 1.801248] xen_set_ioapic_routing: irq 15 gsi 15 vector 144 ioapic 0 pin 15
triggering 0 polarity 0
[ 1.805291] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 1.819441] Detected 2933.440 MHz processor.
[ 1.834273] Console: colour VGA+ 80x25
[ 1.834276] console handover: boot [xenboot0] -> real [hvc0]
[ 1.839722] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.857999] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.865971] Checking aperture...
[ 1.883620] No AGP bridge found
[ 1.883709] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.891355] xen_swiotlb_fixup: buf=ffff8800034ab000 size=67108864
[ 1.909832] xen_swiotlb_fixup: buf=ffff88000750b000 size=32768
[ 1.909894] Placing 64MB software IO TLB between ffff8800034ab000 -
ffff8800074ab000
[ 1.914431] software IO TLB at phys 0x34ab000 - 0x74ab000
[ 1.927065] Memory: 682788k/786432k available (5383k kernel code, 412k
absent, 102560k reserved, 3284k data, 504k init)
[ 1.938701] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 1.950806] Xen: using vcpuop timer interface
[ 1.956860] installing Xen timer for CPU 0
[ 1.960957] alloc irq_desc for 24 on node 0
[ 1.969030] alloc kstat_irqs on node 0
[ 1.134074] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5866.88 BogoMIPS (lpj=2933440)
[ 1.150302] Security Framework initialized
[ 1.156339] SELinux: Initializing.
[ 1.162407] SELinux: Starting in permissive mode
[ 1.170492] Mount-cache hash table entries: 256
[ 1.176656] Initializing cgroup subsys ns
[ 1.180594] Initializing cgroup subsys cpuacct
[ 1.188679] Initializing cgroup subsys freezer
[ 1.196781] CPU: Physical Processor ID: 0
[ 1.200806] CPU: Processor Core ID: 0
[ 1.206874] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.214979] CPU: L2 cache: 256K
[ 1.219020] CPU: L3 cache: 8192K
[ 1.223073] SMP alternatives: switching to UP code
[ 1.265593] Freeing SMP alternatives: 41k freed
[ 1.265604] ACPI: Core revision 20090320
[ 1.281457] alloc irq_desc for 25 on node 0
[ 1.281461] alloc kstat_irqs on node 0
[ 1.281468] alloc irq_desc for 26 on node 0
[ 1.281471] alloc kstat_irqs on node 0
[ 1.281476] alloc irq_desc for 27 on node 0
[ 1.281479] alloc kstat_irqs on node 0
[ 1.281484] alloc irq_desc for 28 on node 0
[ 1.285882] alloc kstat_irqs on node 0
[ 1.292007] Brought up 1 CPUs
[ 1.296104] khelper used greatest stack depth: 6264 bytes left
[ 1.306222] net_namespace: 1832 bytes
[ 1.310356] Booting paravirtualized kernel on Xen
[ 1.318247] Xen version: 3.5-unstable (preserve-AD) (dom0)
[ 1.324444] Grant table initialized
[ 1.330427] Time: 7:29:44 Date: 07/02/09
[ 1.336497] NET: Registered protocol family 16
[ 1.344720] alloc irq_desc for 29 on node 0
[ 1.350628] alloc kstat_irqs on node 0
[ 1.354722] xenbus_probe_init ok
[ 1.360979] ACPI: bus type pci registered
[ 1.364919] PCI: MCFG configuration 0: base a0000000 segment 0 buses 0 - 255
[ 1.376932] PCI: MCFG area at a0000000 reserved in E820
[ 1.423141] PCI: Using MMCONFIG at a0000000 - afffffff
[ 1.423145] PCI: Using configuration type 1 for base access
[ 1.423420] khelper used greatest stack depth: 6152 bytes left
[ 1.430698] bio: create slab <bio-0> at 0
[ 1.432241] ACPI: EC: Look up EC in DSDT
[ 1.459694] ACPI: Interpreter enabled
[ 1.459698] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.459729] ACPI: Using IOAPIC for interrupt routing
[ 1.467252] ACPI: No dock devices found.
[ 1.467265] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.467499] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.467507] pci 0000:00:01.0: PME# disabled
[ 1.467614] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.475988] pci 0000:00:03.0: PME# disabled
[ 1.482173] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.492186] pci 0000:00:07.0: PME# disabled
[ 1.496818] pci 0000:00:1a.0: reg 20 io port: [0x50c0-0x50df]
[ 1.506522] pci 0000:00:1a.1: reg 20 io port: [0x50a0-0x50bf]
[ 1.514603] pci 0000:00:1a.2: reg 20 io port: [0x5080-0x509f]
[ 1.524699] pci 0000:00:1a.7: reg 10 32bit mmio: [0xb7201400-0xb72017ff]
[ 1.532746] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.542774] pci 0000:00:1a.7: PME# disabled
[ 1.546911] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.556948] pci 0000:00:1c.0: PME# disabled
[ 1.563108] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.573147] pci 0000:00:1c.1: PME# disabled
[ 1.577291] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.587327] pci 0000:00:1c.4: PME# disabled
[ 1.593485] pci 0000:00:1d.0: reg 20 io port: [0x5060-0x507f]
[ 1.603647] pci 0000:00:1d.1: reg 20 io port: [0x5040-0x505f]
[ 1.611729] pci 0000:00:1d.2: reg 20 io port: [0x5020-0x503f]
[ 1.619802] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb7201000-0xb72013ff]
[ 1.627850] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.637879] pci 0000:00:1d.7: PME# disabled
[ 1.644136] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 1.654075] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 1.664174] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 1.672256] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask
007f)
[ 1.684420] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask
007f)
[ 1.696630] pci 0000:00:1f.2: reg 10 io port: [0x5138-0x513f]
[ 1.704627] pci 0000:00:1f.2: reg 14 io port: [0x514c-0x514f]
[ 1.714728] pci 0000:00:1f.2: reg 18 io port: [0x5130-0x5137]
[ 1.722809] pci 0000:00:1f.2: reg 1c io port: [0x5148-0x514b]
[ 1.730890] pci 0000:00:1f.2: reg 20 io port: [0x5110-0x511f]
[ 1.738971] pci 0000:00:1f.2: reg 24 io port: [0x5100-0x510f]
[ 1.747126] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0000000-0xf00000ff]
[ 1.757167] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 1.765305] pci 0000:00:1f.5: reg 10 io port: [0x5128-0x512f]
[ 1.775382] pci 0000:00:1f.5: reg 14 io port: [0x5144-0x5147]
[ 1.783465] pci 0000:00:1f.5: reg 18 io port: [0x5120-0x5127]
[ 1.791546] pci 0000:00:1f.5: reg 1c io port: [0x5140-0x5143]
[ 1.799628] pci 0000:00:1f.5: reg 20 io port: [0x50f0-0x50ff]
[ 1.807708] pci 0000:00:1f.5: reg 24 io port: [0x50e0-0x50ef]
[ 1.817996] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.825888] pci 0000:02:00.0: PME# disabled
[ 1.829986] pci 0000:00:03.0: bridge io port: [0x3000-0x4fff]
[ 1.840065] pci 0000:00:03.0: bridge 32bit mmio: [0xb0000000-0xb6ffffff]
[ 1.848148] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff]
[ 1.860340] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 1.870446] pci 0000:03:00.0: PME# disabled
[ 1.874563] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 1.884619] pci 0000:03:02.0: PME# disabled
[ 1.888721] pci 0000:02:00.0: bridge io port: [0x3000-0x4fff]
[ 1.900814] pci 0000:02:00.0: bridge 32bit mmio: [0xb0000000-0xb6ffffff]
[ 1.908897] pci 0000:02:00.0: bridge 64bit mmio pref: [0xd0000000-0xefffffff]
[ 1.921071] pci 0000:04:00.0: reg 10 32bit mmio: [0xb6000000-0xb6ffffff]
[ 1.929137] pci 0000:04:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 1.939238] pci 0000:04:00.0: reg 1c 64bit mmio: [0xb4000000-0xb5ffffff]
[ 1.949333] pci 0000:04:00.0: reg 24 io port: [0x4000-0x407f]
[ 1.957413] pci 0000:04:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 1.967671] pci 0000:03:00.0: bridge io port: [0x4000-0x4fff]
[ 1.975640] pci 0000:03:00.0: bridge 32bit mmio: [0xb4000000-0xb6ffffff]
[ 1.985745] pci 0000:03:00.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 1.997920] pci 0000:05:00.0: reg 10 32bit mmio: [0xb2000000-0xb2ffffff]
[ 2.005986] pci 0000:05:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 2.016087] pci 0000:05:00.0: reg 1c 64bit mmio: [0xb0000000-0xb1ffffff]
[ 2.024161] pci 0000:05:00.0: reg 24 io port: [0x3000-0x307f]
[ 2.034263] pci 0000:05:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[ 2.044470] pci 0000:03:02.0: bridge io port: [0x3000-0x3fff]
[ 2.052441] pci 0000:03:02.0: bridge 32bit mmio: [0xb0000000-0xb2ffffff]
[ 2.062545] pci 0000:03:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 2.072937] pci 0000:08:00.0: reg 10 64bit mmio: [0xb7100000-0xb710ffff]
[ 2.082843] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 2.092894] pci 0000:08:00.0: PME# disabled
[ 2.097012] pci 0000:00:1c.1: bridge 32bit mmio: [0xb7100000-0xb71fffff]
[ 2.107062] pci 0000:09:00.0: reg 10 io port: [0x2018-0x201f]
[ 2.117134] pci 0000:09:00.0: reg 14 io port: [0x2024-0x2027]
[ 2.125215] pci 0000:09:00.0: reg 18 io port: [0x2010-0x2017]
[ 2.133296] pci 0000:09:00.0: reg 1c io port: [0x2020-0x2023]
[ 2.141377] pci 0000:09:00.0: reg 20 io port: [0x2000-0x200f]
[ 2.149459] pci 0000:09:00.0: reg 24 32bit mmio: [0xb7000000-0xb70003ff]
[ 2.159608] pci 0000:09:00.0: supports D1
[ 2.165612] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 2.173697] pci 0000:09:00.0: PME# disabled
[ 2.179835] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
[ 2.189902] pci 0000:00:1c.4: bridge 32bit mmio: [0xb7000000-0xb70fffff]
[ 2.198028] pci 0000:0a:02.0: reg 10 io port: [0x1000-0x101f]
[ 2.208202] pci 0000:00:1e.0: transparent bridge
[ 2.214146] pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
[ 2.222277] pci_bus 0000:00: on NUMA node 0
[ 2.228287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.239217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 2.246663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
[ 2.256632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
[ 2.264713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
[ 2.274817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 2.282899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 2.304782] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 2.305184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 2.315263] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 2.325364] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 2.335467] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 2.349606] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 2.359709] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 2.371829] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 2.382038] xenbus_probe_backend_init bus registered ok
[ 2.387974] xenbus_probe_frontend_init bus registered ok
[ 2.396011] xen_balloon: Initialising balloon driver.
[ 2.404389] SCSI subsystem initialized
[ 2.410244] libata version 3.00 loaded.
[ 2.414548] usbcore: registered new interface driver usbfs
[ 2.422431] usbcore: registered new interface driver hub
[ 2.430587] usbcore: registered new device driver usb
[ 2.438908] PCI: Using ACPI for IRQ routing
[ 2.445116] cfg80211: Using static regulatory domain info
[ 2.452784] cfg80211: Regulatory domain: US
[ 2.458845] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 2.470967] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 2.479545] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 2.489646] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 2.499749] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 2.509850] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 2.519951] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 2.530055] NetLabel: Initializing
[ 2.536113] NetLabel: domain hash size = 128
[ 2.542174] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.548242] NetLabel: unlabeled traffic allowed by default
[ 2.556387] cfg80211: Calling CRDA for country: US
[ 2.564530] Xen: Initializing Xen DMA ops
[ 2.570531] Xen: Enabling DMA fallback to swiotlb
[ 2.578706] hpet clockevent registered
[ 2.582696] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 2.594819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 2.600881] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 2.613946] pnp: PnP ACPI init
[ 2.615063] Switched to high resolution mode on CPU 0
[ 2.621132] ACPI: bus type pnp registered
[ 2.628158] xen: registering gsi 8 triggering 1 polarity 0
[ 2.635257] xen_allocate_pirq: returning irq 8 for gsi 8
[ 2.643337] xen: --> irq=8
[ 2.647378] xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
triggering 0 polarity 0
[ 2.661608] xen: registering gsi 13 triggering 1 polarity 0
[ 2.667581] xen_allocate_pirq: returning irq 13 for gsi 13
[ 2.675662] xen: --> irq=13
[ 2.679703] xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
triggering 0 polarity 0
[ 2.695021] pnp: PnP ACPI: found 8 devices
[ 2.699927] ACPI: ACPI bus type pnp unregistered
[ 2.707993] system 00:05: ioport range 0x500-0x53f has been reserved
[ 2.716069] system 00:05: ioport range 0x400-0x47f has been reserved
[ 2.726170] system 00:05: ioport range 0x680-0x6ff has been reserved
[ 2.739390] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 2.744351] pci 0000:00:01.0: IO window: disabled
[ 2.750416] pci 0000:00:01.0: MEM window: disabled
[ 2.758496] pci 0000:00:01.0: PREFETCH window: disabled
[ 2.764562] pci 0000:04:00.0: BAR 6: can't allocate mem resource
[0xf0000000-0xefffffff]
[ 2.776676] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[ 2.786790] pci 0000:03:00.0: IO window: 0x4000-0x4fff
[ 2.794874] pci 0000:03:00.0: MEM window: 0xb4000000-0xb6ffffff
[ 2.802954] pci 0000:03:00.0: PREFETCH window:
0x000000e0000000-0x000000efffffff
[ 2.815079] pci 0000:05:00.0: BAR 6: can't allocate mem resource
[0xe0000000-0xdfffffff]
[ 2.825174] pci 0000:03:02.0: PCI bridge, secondary bus 0000:05
[ 2.835276] pci 0000:03:02.0: IO window: 0x3000-0x3fff
[ 2.843360] pci 0000:03:02.0: MEM window: 0xb0000000-0xb2ffffff
[ 2.851440] pci 0000:03:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 2.863564] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[ 2.871641] pci 0000:02:00.0: IO window: 0x3000-0x4fff
[ 2.879725] pci 0000:02:00.0: MEM window: 0xb0000000-0xb6ffffff
[ 2.889839] pci 0000:02:00.0: PREFETCH window:
0x000000d0000000-0x000000efffffff
[ 2.899943] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 2.910039] pci 0000:00:03.0: IO window: 0x3000-0x4fff
[ 2.916102] pci 0000:00:03.0: MEM window: 0xb0000000-0xb6ffffff
[ 2.926203] pci 0000:00:03.0: PREFETCH window:
0x000000d0000000-0x000000efffffff
[ 2.936307] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[ 2.946403] pci 0000:00:07.0: IO window: disabled
[ 2.952468] pci 0000:00:07.0: MEM window: disabled
[ 2.960547] pci 0000:00:07.0: PREFETCH window: disabled
[ 2.966611] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
[ 2.976706] pci 0000:00:1c.0: IO window: disabled
[ 2.982786] pci 0000:00:1c.0: MEM window: disabled
[ 2.990865] pci 0000:00:1c.0: PREFETCH window: disabled
[ 2.998951] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:08
[ 3.009044] pci 0000:00:1c.1: IO window: disabled
[ 3.015111] pci 0000:00:1c.1: MEM window: 0xb7100000-0xb71fffff
[ 3.023190] pci 0000:00:1c.1: PREFETCH window: disabled
[ 3.031275] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09
[ 3.041371] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 3.047434] pci 0000:00:1c.4: MEM window: 0xb7000000-0xb70fffff
[ 3.057534] pci 0000:00:1c.4: PREFETCH window: disabled
[ 3.063598] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 3.073695] pci 0000:00:1e.0: IO window: 0x1000-0x1fff
[ 3.081792] pci 0000:00:1e.0: MEM window: disabled
[ 3.089872] pci 0000:00:1e.0: PREFETCH window: disabled
[ 3.095941] xen: registering gsi 16 triggering 0 polarity 1
[ 3.104012] alloc irq_desc for 16 on node 0
[ 3.112091] alloc kstat_irqs on node 0
[ 3.116142] xen: --> irq=16
[ 3.120173] xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16
triggering 1 polarity 1
[ 3.134318] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.144421] pci 0000:00:01.0: setting latency timer to 64
[ 3.152502] xen: registering gsi 16 triggering 0 polarity 1
[ 3.160578] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.168658] xen: --> irq=16
[ 3.172700] xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16
triggering 1 polarity 1
[ 3.186857] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.194939] pci 0000:00:03.0: setting latency timer to 64
[ 3.203025] pci 0000:02:00.0: setting latency timer to 64
[ 3.211106] pci 0000:03:00.0: setting latency timer to 64
[ 3.219186] pci 0000:03:02.0: setting latency timer to 64
[ 3.227265] xen: registering gsi 16 triggering 0 polarity 1
[ 3.235341] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.243422] xen: --> irq=16
[ 3.247463] xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16
triggering 1 polarity 1
[ 3.261607] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.271710] pci 0000:00:07.0: setting latency timer to 64
[ 3.279793] xen: registering gsi 17 triggering 0 polarity 1
[ 3.287882] alloc irq_desc for 17 on node 0
[ 3.295963] alloc kstat_irqs on node 0
[ 3.300010] xen: --> irq=17
[ 3.304044] xen_set_ioapic_routing: irq 17 gsi 17 vector 160 ioapic 0 pin 17
triggering 1 polarity 1
[ 3.318188] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.326272] pci 0000:00:1c.0: setting latency timer to 64
[ 3.334353] xen: registering gsi 16 triggering 0 polarity 1
[ 3.342428] xen_allocate_pirq: returning irq 16 for gsi 16
[ 3.350509] xen: --> irq=16
[ 3.354550] xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16
triggering 1 polarity 1
[ 3.368694] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 3.378797] pci 0000:00:1c.1: setting latency timer to 64
[ 3.386894] xen: registering gsi 17 triggering 0 polarity 1
[ 3.394969] xen_allocate_pirq: returning irq 17 for gsi 17
[ 3.403050] xen: --> irq=17
[ 3.407091] xen_set_ioapic_routing: irq 17 gsi 17 vector 160 ioapic 0 pin 17
triggering 1 polarity 1
[ 3.421235] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.431338] pci 0000:00:1c.4: setting latency timer to 64
[ 3.437402] pci 0000:00:1e.0: setting latency timer to 64
[ 3.445479] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 3.453557] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 3.463659] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
[ 3.473760] pci_bus 0000:02: resource 1 mem: [0xb0000000-0xb6ffffff]
[ 3.481855] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xefffffff]
[ 3.491956] pci_bus 0000:03: resource 0 io: [0x3000-0x4fff]
[ 3.502057] pci_bus 0000:03: resource 1 mem: [0xb0000000-0xb6ffffff]
[ 3.509625] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xefffffff]
[ 3.519727] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
[ 3.529828] pci_bus 0000:04: resource 1 mem: [0xb4000000-0xb6ffffff]
[ 3.537921] pci_bus 0000:04: resource 2 pref mem [0xe0000000-0xefffffff]
[ 3.546002] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 3.556103] pci_bus 0000:05: resource 1 mem: [0xb0000000-0xb2ffffff]
[ 3.564184] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 3.574287] pci_bus 0000:08: resource 1 mem: [0xb7100000-0xb71fffff]
[ 3.584387] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff]
[ 3.592468] pci_bus 0000:09: resource 1 mem: [0xb7000000-0xb70fffff]
[ 3.602569] pci_bus 0000:0a: resource 0 io: [0x1000-0x1fff]
[ 3.610650] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 3.616711] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 3.626838] NET: Registered protocol family 2
[ 3.634959] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 3.647192] TCP established hash table entries: 131072 (order: 9, 2097152
bytes)
[ 3.657418] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.665380] TCP: Hash tables configured (established 131072 bind 65536)
[ 3.675313] TCP reno registered
[ 3.681432] NET: Registered protocol family 1
[ 3.687477] Trying to unpack rootfs image as initramfs...
[ 3.699083] Freeing initrd memory: 10426k freed
[ 3.702951] kvm: no hardware support
[ 3.707688] has_svm: not amd
[ 3.711681] kvm: no hardware support
[ 3.716653] Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>,
Peter Oruba
[ 3.727845] Scanning for low memory corruption every 60 seconds
[ 3.738268] audit: initializing netlink socket (disabled)
[ 3.744043] type=2000 audit(1246519786.260:1): initialized
[ 3.762322] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.764898] VFS: Disk quotas dquot_6.5.2
[ 3.766348] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.777238] msgmni has been set to 1556
[ 3.782601] SELinux: Registering netfilter hooks
[ 3.790848] alg: No test for stdrng (krng)
[ 3.794676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 3.806679] io scheduler noop registered
[ 3.812739] io scheduler anticipatory registered
[ 3.820820] io scheduler deadline registered
[ 3.826906] io scheduler cfq registered (default)
[ 3.832964] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 3.841023] pci 0000:00:1a.0: Performing full reset
[ 3.849128] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 3.859205] pci 0000:00:1a.1: Performing full reset
[ 3.867309] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 3.875367] pci 0000:00:1a.2: Performing full reset
[ 3.883596] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 3.891530] pci 0000:00:1d.0: Performing full reset
[ 3.899633] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 3.909712] pci 0000:00:1d.1: Performing full reset
[ 3.915795] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 3.925875] pci 0000:00:1d.2: Performing full reset
[ 3.934167] pci 0000:05:00.0: Boot video device
[ 3.940182] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 3.950350] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 3.958426] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 3.968520] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.978621] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.986702] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 3.996956] aer 0000:00:01.0:pcie02: AER service couldn't init device: no
_OSC support
[ 4.008712] aer 0000:00:03.0:pcie02: AER service couldn't init device: no
_OSC support
[ 4.020833] aer 0000:00:07.0:pcie02: AER service couldn't init device: no
_OSC support
[ 4.030997] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.039321] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 4.051146] ACPI: Power Button [PWRF]
[ 4.055284] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 4.067313] ACPI: Sleep Button [SLPB]
[ 4.074035] ACPI Warning (processor_throttling-0843): Invalid throttling
state, reset
[ 4.085490] [20090320]
[ 4.087657] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 4.097680] processor ACPI_CPU:00: registered as cooling_device0
[ 4.105695] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.118079] Event-channel device installed.
[ 4.119894] ***blkif_init
[ 4.125279] *** netif_init
[ 4.128427] registering netback
[ 4.137246] alloc irq_desc for 30 on node 0
[ 4.140071] alloc kstat_irqs on node 0
[ 4.146700] Non-volatile memory driver v1.3
[ 4.152233] Linux agpgart interface v0.103
[ 4.158361] [drm] Initialized drm 1.1.0 20060810
[ 4.166363] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
(XEN) irq.c:647:d0 Cannot bind IRQ 0 to guest. In use by 'timer'.
(XEN) irq.c:647:d0 Cannot bind IRQ 0 to guest. In use by 'timer'.
(XEN) irq.c:647:d0 Cannot bind IRQ 0 to guest. In use by 'timer'.
(XEN) irq.c:647:d0 Cannot bind IRQ 0 to guest. In use by 'timer'.
[ 4.418178] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 4.418490] xen: registering gsi 18 triggering 0 polarity 1
[ 4.418495] alloc irq_desc for 18 on node 0
[ 4.418498] alloc kstat_irqs on node 0
[ 4.418503] xen: --> irq=18
[ 4.418506] xen_set_ioapic_routing: irq 18 gsi 18 vector 168 ioapic 0 pin 18
triggering 1 polarity 1
[ 4.418515] serial 0000:0a:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.418734] 0000:0a:02.0: ttyS0 at I/O 0x1008 (irq = 18) is a 16550A
[ 4.420421] brd: module loaded
[ 4.421421] loop: module loaded
[ 4.421518] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 4.421632] Driver 'sd' needs updating - please use bus_type methods
[ 4.421670] Driver 'sr' needs updating - please use bus_type methods
[ 4.421763] ahci 0000:09:00.0: version 3.0
[ 4.421777] xen: registering gsi 16 triggering 0 polarity 1
[ 4.421780] xen_allocate_pirq: returning irq 16 for gsi 16
[ 4.421783] xen: --> irq=16
[ 4.421786] xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16
triggering 1 polarity 1
[ 4.421794] ahci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.421814] ahci 0000:09:00.0: controller can't do NCQ, turning off CAP_NCQ
[ 4.421817] ahci 0000:09:00.0: controller can't do PMP, turning off CAP_PMP
[ 4.421821] ahci 0000:09:00.0: MV_AHCI HACK: port_map 7 -> 3
[ 4.421824] ahci 0000:09:00.0: Disabling your PATA port. Use the boot option
'ahci.marvell_enable=0' to avoid this.
[ 4.421837] ahci: SSS flag set, parallel bus scan disabled
[ 4.421874] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3
impl IDE mode
[ 4.427327] ahci 0000:09:00.0: flags: 64bit stag led slum part
[ 4.437433] ahci 0000:09:00.0: setting latency timer to 64
[ 4.443666] scsi0 : ahci
[ 4.447702] scsi1 : ahci
[ 4.451689] scsi2 : ahci
[ 4.455729] ata1: SATA max UDMA/133 abar m1024@0xb7000000 port 0xb7000100
irq 16
[ 4.467734] ata2: SATA max UDMA/133 abar m1024@0xb7000000 port 0xb7000180
irq 16
[ 4.477834] ata3: DUMMY
[ 4.786094] ata1: SATA link down (SStatus 0 SControl 300)
[ 5.091081] ata2: SATA link down (SStatus 0 SControl 300)
[ 5.091182] ata_piix 0000:00:1f.2: version 2.13
[ 5.091195] xen: registering gsi 19 triggering 0 polarity 1
[ 5.091199] alloc irq_desc for 19 on node 0
[ 5.091202] alloc kstat_irqs on node 0
[ 5.091206] xen: --> irq=19
[ 5.091209] xen_set_ioapic_routing: irq 19 gsi 19 vector 176 ioapic 0 pin 19
triggering 1 polarity 1
[ 5.091217] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.091225] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 5.091265] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5.091327] scsi3 : ata_piix
[ 5.091436] scsi4 : ata_piix
[ 5.091653] ata4: SATA max UDMA/133 cmd 0x5138 ctl 0x514c bmdma 0x5110 irq 19
[ 5.091662] ata5: SATA max UDMA/133 cmd 0x5130 ctl 0x5148 bmdma 0x5118 irq 19
[ 5.852135] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.852157] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 5.855318] ata4.00: ATAPI: PIONEER BD-ROM BDC-202, 1.04, max UDMA/66
[ 5.861324] ata4.00: configured for UDMA/66
[ 5.874697] scsi 3:0:0:0: CD-ROM PIONEER BD-ROM BDC-202 1.04
PQ: 0 ANSI: 5
[ 5.897899] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 5.897910] Uniform CD-ROM driver Revision: 3.20
[ 5.898073] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.898169] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 6.659077] ata5.00: SATA link down (SStatus 0 SControl 300)
[ 6.659100] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.673659] ata5.01: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 6.673667] ata5.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 6.679673] ata5.01: configured for UDMA/133
[ 6.679747] scsi 4:0:1:0: Direct-Access ATA ST3500320AS SD15
PQ: 0 ANSI: 5
[ 6.679924] sd 4:0:1:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 6.679943] sd 4:0:1:0: [sda] Write Protect is off
[ 6.679947] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 6.679987] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.680078] sda: sda1 sda2 < sda5 >
[ 6.705505] sd 4:0:1:0: [sda] Attached SCSI disk
[ 6.705601] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 6.705686] xen: registering gsi 18 triggering 0 polarity 1
[ 6.705690] xen_allocate_pirq: returning irq 18 for gsi 18
[ 6.705693] xen: --> irq=18
[ 6.705696] xen_set_ioapic_routing: irq 18 gsi 18 vector 168 ioapic 0 pin 18
triggering 1 polarity 1
[ 6.705703] ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 6.705712] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 6.705751] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 6.705813] scsi5 : ata_piix
[ 6.705924] scsi6 : ata_piix
[ 6.706094] ata6: SATA max UDMA/133 cmd 0x5128 ctl 0x5144 bmdma 0x50f0 irq 18
[ 6.706102] ata7: SATA max UDMA/133 cmd 0x5120 ctl 0x5140 bmdma 0x50f8 irq 18
[ 7.022281] ata6: SATA link down (SStatus 0 SControl 300)
[ 7.478013] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.481607] ata7.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 7.481615] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 7.487621] ata7.00: configured for UDMA/133
[ 7.487693] scsi 6:0:0:0: Direct-Access ATA ST3500320AS SD15
PQ: 0 ANSI: 5
[ 7.487863] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 7.487881] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.487885] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 7.487913] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 7.488013] sdb:
[ 7.510421] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 7.510515] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.510812] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 7.510816] Copyright (c) 1999-2006 Intel Corporation.
[ 7.510863] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
[ 7.510867] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 7.510964] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.510968] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.511020] tg3.c:v3.98 (February 25, 2009)
[ 7.511032] xen: registering gsi 17 triggering 0 polarity 1
[ 7.511036] xen_allocate_pirq: returning irq 17 for gsi 17
[ 7.511039] xen: --> irq=17
[ 7.511042] xen_set_ioapic_routing: irq 17 gsi 17 vector 160 ioapic 0 pin 17
triggering 1 polarity 1
[ 7.511049] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.511058] tg3 0000:08:00.0: setting latency timer to 64
[ 7.513038] tg3 0000:08:00.0: PME# disabled
[ 7.519136] eth0: Tigon3 [partno(BCM95721A211F) rev 4201] (PCI Express) MAC
address 00:10:18:32:51:a2
[ 7.519141] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet)
(WireSpeed[1])
[ 7.519146] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 7.519149] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 7.519230] sky2 driver version 1.22
[ 7.519431] console [netcon0] enabled
[ 7.519435] netconsole: network logging started
[ 7.519566] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.519571] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 7.519591] xen: registering gsi 18 triggering 0 polarity 1
[ 7.519594] xen_allocate_pirq: returning irq 18 for gsi 18
[ 7.519597] xen: --> irq=18
[ 7.519600] xen_set_ioapic_routing: irq 18 gsi 18 vector 168 ioapic 0 pin 18
triggering 1 polarity 1
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=18, old_irq=18, new_irq=18
(XEN) ioapic_guest_write: old_entry=0000a0a8, new_entry=0001a0a8
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 7.519616] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.519631] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 7.519637] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.519696]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file 'devices'
[ 7.519703]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 7.519765] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 7.519775] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 7.519781] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr
[ 7.519811] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.523720] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.523729] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 7.523733] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 7.523740] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xb7201400
[ 7.523745] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.527643] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1
period=1024 RUN
[ 7.532928] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 7.532968] usb usb1: default language 0x0409
[ 7.532983] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.532990] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.532995] usb usb1: Product: EHCI Host Controller
[ 7.532998] usb usb1: Manufacturer: Linux 2.6.30-rc6-tip ehci_hcd
[ 7.533001] usb usb1: SerialNumber: 0000:00:1a.7
[ 7.533030] usb usb1: uevent
[ 7.533073] usb usb1: usb_probe_device
[ 7.533077] usb usb1: configuration #1 chosen from 1 choice
[ 7.533084] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 7.533099] usb 1-0:1.0: uevent
[ 7.533139] hub 1-0:1.0: usb_probe_interface
[ 7.533143] hub 1-0:1.0: usb_probe_interface - got id
[ 7.533146] hub 1-0:1.0: USB hub found
[ 7.533159] hub 1-0:1.0: 6 ports detected
[ 7.533162] hub 1-0:1.0: standalone hub
[ 7.533165] hub 1-0:1.0: no power switching (usb 1.0)
[ 7.533168] hub 1-0:1.0: individual port over-current protection
[ 7.533171] hub 1-0:1.0: power on to power good time: 20ms
[ 7.533177] hub 1-0:1.0: local power source is good
[ 7.533181] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 7.533293]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 7.533366] xen: registering gsi 23 triggering 0 polarity 1
[ 7.533371] alloc irq_desc for 23 on node 0
[ 7.533374] alloc kstat_irqs on node 0
[ 7.533378] xen: --> irq=23
[ 7.533381] xen_set_ioapic_routing: irq 23 gsi 23 vector 184 ioapic 0 pin 23
triggering 1 polarity 1
[ 7.533389] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.533403] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.533409] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.533459]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '002'
[ 7.533516] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 7.533525] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 7.533531] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr
[ 7.533557] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.537460] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.537469] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 7.537473] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 7.537487] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb7201000
[ 7.537493] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.541384] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1
period=1024 RUN
[ 7.546901] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.546947] usb usb2: default language 0x0409
[ 7.546962] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.546969] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.546976] usb usb2: Product: EHCI Host Controller
[ 7.546984] usb usb2: Manufacturer: Linux 2.6.30-rc6-tip ehci_hcd
[ 7.546988] usb usb2: SerialNumber: 0000:00:1d.7
[ 7.547016] usb usb2: uevent
[ 7.547078] usb usb2: usb_probe_device
[ 7.547082] usb usb2: configuration #1 chosen from 1 choice
[ 7.547089] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.547103] usb 2-0:1.0: uevent
[ 7.547142] hub 2-0:1.0: usb_probe_interface
[ 7.547145] hub 2-0:1.0: usb_probe_interface - got id
[ 7.547149] hub 2-0:1.0: USB hub found
[ 7.547161] hub 2-0:1.0: 6 ports detected
[ 7.547164] hub 2-0:1.0: standalone hub
[ 7.547167] hub 2-0:1.0: no power switching (usb 1.0)
[ 7.547170] hub 2-0:1.0: individual port over-current protection
[ 7.547173] hub 2-0:1.0: power on to power good time: 20ms
[ 7.547178] hub 2-0:1.0: local power source is good
[ 7.547182] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 7.547256]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 7.547356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.547360] ohci_hcd: block sizes: ed 80 td 96
[ 7.547405] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.547481] xen: registering gsi 16 triggering 0 polarity 1
[ 7.547485] xen_allocate_pirq: returning irq 16 for gsi 16
[ 7.549082] xen: --> irq=16
[ 7.553124] xen_set_ioapic_routing: irq 16 gsi 16 vector 152 ioapic 0 pin 16
triggering 1 polarity 1
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=16, old_irq=16, new_irq=16
(XEN) ioapic_guest_write: old_entry=0000a098, new_entry=0001a098
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 7.567276] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.607676] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.615754] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.621871]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '003'
[ 7.638052] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 7.644080] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 7.656180] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 7.664247] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.672320] uhci_hcd 0000:00:1a.0: Performing full reset
[ 7.680421] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 7.690505] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0
[ 7.698629] usb usb3: default language 0x0409
[ 7.704654] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.714746] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.726908] usb usb3: Product: UHCI Host Controller
[ 7.732969] usb usb3: Manufacturer: Linux 2.6.30-rc6-tip uhci_hcd
[ 7.741050] usb usb3: SerialNumber: 0000:00:1a.0
[ 7.749162] usb usb3: uevent
[ 7.753190] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER
sig=k CSC CONNECT
[ 7.763285] hub 2-0:1.0: port 1: status 0501 change 0001
[ 7.771365] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001403 POWER
sig=k CSC CONNECT
[ 7.783482] hub 2-0:1.0: port 2: status 0501 change 0001
[ 7.791608] usb usb3: usb_probe_device
[ 7.797619] usb usb3: configuration #1 chosen from 1 choice
[ 7.805711] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 7.815816] usb 3-0:1.0: uevent
[ 7.819884] hub 3-0:1.0: usb_probe_interface
[ 7.825902] hub 3-0:1.0: usb_probe_interface - got id
[ 7.831963] hub 3-0:1.0: USB hub found
[ 7.838047] hub 3-0:1.0: 2 ports detected
[ 7.844085] hub 3-0:1.0: standalone hub
[ 7.850145] hub 3-0:1.0: no power switching (usb 1.0)
[ 7.858227] hub 3-0:1.0: individual port over-current protection
[ 7.866309] hub 3-0:1.0: power on to power good time: 2ms
[ 7.874397] hub 3-0:1.0: local power source is good
[ 7.882471] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 7.890617]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 7.906758] hub 2-0:1.0: state 7 ports 6 chg 0006 evt 0000
[ 7.914811] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 7.924905] ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
[ 7.933056] xen: registering gsi 21 triggering 0 polarity 1
[ 7.941060] alloc irq_desc for 21 on node 0
[ 7.949139] alloc kstat_irqs on node 0
[ 7.953190] xen: --> irq=21
[ 7.957221] xen_set_ioapic_routing: irq 21 gsi 21 vector 192 ioapic 0 pin 21
triggering 1 polarity 1
[ 7.971378] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.981481] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.991579] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.997692] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER
OWNER sig=se0 CSC
[ 8.009789] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 8.019868] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[ 8.027971]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '004'
[ 8.044185] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 8.054221] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 8.062295] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 8.070381] uhci_hcd 0000:00:1a.1: Performing full reset
[ 8.078482] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 8.088600] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
[ 8.096721] usb usb4: default language 0x0409
[ 8.102744] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.110815] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.122937] usb usb4: Product: UHCI Host Controller
[ 8.131018] usb usb4: Manufacturer: Linux 2.6.30-rc6-tip uhci_hcd
[ 8.139099] usb usb4: SerialNumber: 0000:00:1a.1
[ 8.147225] usb usb4: uevent
[ 8.151265] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER
OWNER sig=se0 CSC
[ 8.161349] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0004
[ 8.169412] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.177503] usb usb4: usb_probe_device
[ 8.183546] usb usb4: configuration #1 chosen from 1 choice
[ 8.191640] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 8.201743] usb 4-0:1.0: uevent
[ 8.205811] hub 4-0:1.0: usb_probe_interface
[ 8.211830] hub 4-0:1.0: usb_probe_interface - got id
[ 8.219910] hub 4-0:1.0: USB hub found
[ 8.223970] hub 4-0:1.0: 2 ports detected
[ 8.230012] hub 4-0:1.0: standalone hub
[ 8.236073] hub 4-0:1.0: no power switching (usb 1.0)
[ 8.244154] hub 4-0:1.0: individual port over-current protection
[ 8.252235] hub 4-0:1.0: power on to power good time: 2ms
[ 8.260323] hub 4-0:1.0: local power source is good
[ 8.268398] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 8.276545]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 8.292738] xen: registering gsi 19 triggering 0 polarity 1
[ 8.300722] xen_allocate_pirq: returning irq 19 for gsi 19
[ 8.308803] xen: --> irq=19
[ 8.312844] xen_set_ioapic_routing: irq 19 gsi 19 vector 176 ioapic 0 pin 19
triggering 1 polarity 1
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19
(XEN) ioapic_guest_write: old_entry=0000a0b0, new_entry=0001a0b0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 8.326996] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 8.367408] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 8.375485] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 8.381619] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.389646]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '005'
[ 8.405881] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 8.417924] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 8.423978] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 8.434072] uhci_hcd 0000:00:1a.2: Performing full reset
[ 8.442173] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 8.450236] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00005080
[ 8.460382] usb usb5: default language 0x0409
[ 8.466419] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.474490] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.486612] usb usb5: Product: UHCI Host Controller
[ 8.492673] usb usb5: Manufacturer: Linux 2.6.30-rc6-tip uhci_hcd
[ 8.502774] usb usb5: SerialNumber: 0000:00:1a.2
[ 8.508864] usb usb5: uevent
[ 8.514943] usb usb5: usb_probe_device
[ 8.518937] usb usb5: configuration #1 chosen from 1 choice
[ 8.525014] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 8.535115] usb 5-0:1.0: uevent
[ 8.541204] hub 5-0:1.0: usb_probe_interface
[ 8.547220] hub 5-0:1.0: usb_probe_interface - got id
[ 8.553282] hub 5-0:1.0: USB hub found
[ 8.559363] hub 5-0:1.0: 2 ports detected
[ 8.565417] hub 5-0:1.0: standalone hub
[ 8.569457] hub 5-0:1.0: no power switching (usb 1.0)
[ 8.577538] hub 5-0:1.0: individual port over-current protection
[ 8.587640] hub 5-0:1.0: power on to power good time: 2ms
[ 8.593708] hub 5-0:1.0: local power source is good
[ 8.601782] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 8.611948]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 8.628140] xen: registering gsi 23 triggering 0 polarity 1
[ 8.634109] xen_allocate_pirq: returning irq 23 for gsi 23
[ 8.642189] xen: --> irq=23
[ 8.646230] xen_set_ioapic_routing: irq 23 gsi 23 vector 184 ioapic 0 pin 23
triggering 1 polarity 1
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=23, old_irq=23, new_irq=23
(XEN) ioapic_guest_write: old_entry=0000a0b8, new_entry=0001a0b8
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 8.662403] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.700794] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.710892] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.717059] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.725053]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '006'
[ 8.741260] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 8.751310] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 8.759384] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 8.767471] uhci_hcd 0000:00:1d.0: Performing full reset
[ 8.775612] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 8.785696] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005060
[ 8.793818] usb usb6: default language 0x0409
[ 8.799844] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.809937] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.820038] usb usb6: Product: UHCI Host Controller
[ 8.828119] usb usb6: Manufacturer: Linux 2.6.30-rc6-tip uhci_hcd
[ 8.836200] usb usb6: SerialNumber: 0000:00:1d.0
[ 8.844313] usb usb6: uevent
[ 8.848367] usb usb6: usb_probe_device
[ 8.852363] usb usb6: configuration #1 chosen from 1 choice
[ 8.860460] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 8.870561] usb 6-0:1.0: uevent
[ 8.874629] hub 6-0:1.0: usb_probe_interface
[ 8.882667] hub 6-0:1.0: usb_probe_interface - got id
[ 8.888727] hub 6-0:1.0: USB hub found
[ 8.892789] hub 6-0:1.0: 2 ports detected
[ 8.898829] hub 6-0:1.0: standalone hub
[ 8.904889] hub 6-0:1.0: no power switching (usb 1.0)
[ 8.912971] hub 6-0:1.0: individual port over-current protection
[ 8.923072] hub 6-0:1.0: power on to power good time: 2ms
[ 8.929172] hub 6-0:1.0: local power source is good
[ 8.937214] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 8.945361]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 8.961549] xen: registering gsi 19 triggering 0 polarity 1
[ 8.969551] xen_allocate_pirq: returning irq 19 for gsi 19
[ 8.977632] xen: --> irq=19
[ 8.981673] xen_set_ioapic_routing: irq 19 gsi 19 vector 176 ioapic 0 pin 19
triggering 1 polarity 1
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=19, old_irq=19, new_irq=19
(XEN) ioapic_guest_write: old_entry=0000a0b0, new_entry=0001a0b0
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 8.995825] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.036247] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9.044324] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.050447] uhci_hcd 0000:00:1d.0: port 1 portsc 01ab,00
[ 9.058479] hub 6-0:1.0: port 1: status 0301 change 0003
[ 9.066564] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00
[ 9.074633] hub 6-0:1.0: port 2: status 0301 change 0003
[ 9.082729]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '007'
[ 9.098941] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 9.108987] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 9.117061] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 9.125134] uhci_hcd 0000:00:1d.1: Performing full reset
[ 9.133235] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 9.143319] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005040
[ 9.151434] usb usb3: suspend_rh (auto-stop)
[ 9.157526] usb usb7: default language 0x0409
[ 9.165561] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.173632] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 9.185753] usb usb7: Product: UHCI Host Controller
[ 9.191814] usb usb7: Manufacturer: Linux 2.6.30-rc6-tip uhci_hcd
[ 9.199895] usb usb7: SerialNumber: 0000:00:1d.1
[ 9.208008] usb usb7: uevent
[ 9.212062] hub 6-0:1.0: state 7 ports 2 chg 0006 evt 0000
[ 9.218107] hub 6-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
[ 9.228202] usb usb7: usb_probe_device
[ 9.234240] usb usb7: configuration #1 chosen from 1 choice
[ 9.242334] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 9.252437] usb 7-0:1.0: uevent
[ 9.256506] hub 7-0:1.0: usb_probe_interface
[ 9.262524] hub 7-0:1.0: usb_probe_interface - got id
[ 9.268598] hub 7-0:1.0: USB hub found
[ 9.274677] hub 7-0:1.0: 2 ports detected
[ 9.280719] hub 7-0:1.0: standalone hub
[ 9.286780] hub 7-0:1.0: no power switching (usb 1.0)
[ 9.294861] hub 7-0:1.0: individual port over-current protection
[ 9.302943] hub 7-0:1.0: power on to power good time: 2ms
[ 9.311033] hub 7-0:1.0: local power source is good
[ 9.319105] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 9.327282]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 9.343440] xen: registering gsi 18 triggering 0 polarity 1
[ 9.351430] xen_allocate_pirq: returning irq 18 for gsi 18
[ 9.359510] xen: --> irq=18
[ 9.363552] xen_set_ioapic_routing: irq 18 gsi 18 vector 168 ioapic 0 pin 18
triggering 1 polarity 1
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=18, old_irq=18, new_irq=18
(XEN) ioapic_guest_write: old_entry=0000a0a8, new_entry=0001a0a8
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 9.377717] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.418117] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9.426195] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.432276] usb usb4: suspend_rh (auto-stop)
[ 9.440431] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 9.448459]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '008'
[ 9.464656] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 9.476740] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 9.482790] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 9.492875] uhci_hcd 0000:00:1d.2: Performing full reset
[ 9.500983] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 9.509040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005020
[ 9.519186] usb usb8: default language 0x0409
[ 9.525210] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.533281] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 9.545402] usb usb8: Product: UHCI Host Controller
[ 9.551463] usb usb8: Manufacturer: Linux 2.6.30-rc6-tip uhci_hcd
[ 9.561564] usb usb8: SerialNumber: 0000:00:1d.2
[ 9.567671] usb usb8: uevent
[ 9.573756] usb usb8: usb_probe_device
[ 9.577741] usb usb8: configuration #1 chosen from 1 choice
[ 9.583819] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 9.593918] usb 8-0:1.0: uevent
[ 9.600007] hub 8-0:1.0: usb_probe_interface
[ 9.606025] hub 8-0:1.0: usb_probe_interface - got id
[ 9.612086] hub 8-0:1.0: USB hub found
[ 9.618168] hub 8-0:1.0: 2 ports detected
[ 9.624208] hub 8-0:1.0: standalone hub
[ 9.628248] hub 8-0:1.0: no power switching (usb 1.0)
[ 9.636329] hub 8-0:1.0: individual port over-current protection
[ 9.646431] hub 8-0:1.0: power on to power good time: 2ms
[ 9.652508] usb usb5: suspend_rh (auto-stop)
[ 9.660632] hub 8-0:1.0: local power source is good
[ 9.666647] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 9.676828]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '001'
[ 9.693076] usbcore: registered new interface driver usblp
[ 9.701009] Initializing USB Mass Storage driver...
[ 9.709138] usbcore: registered new interface driver usb-storage
[ 9.717155] USB Mass Storage support registered.
[ 9.723290] usbcore: registered new interface driver libusual
[ 9.733480] PNP: No PS/2 controller found. Probing ports directly.
[ 9.744350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.749485] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.755737] mice: PS/2 mouse device common for all mice
[ 9.764002] rtc_cmos 00:02: RTC can wake from S4
[ 9.771867] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 9.779896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 9.787945] usb 6-1: skipped 1 descriptor after interface
[ 9.796091] xen: registering gsi 18 triggering 0 polarity 1
[ 9.804082] xen_allocate_pirq: returning irq 18 for gsi 18
[ 9.812162] xen: --> irq=18
[ 9.816203] xen_set_ioapic_routing: irq 18 gsi 18 vector 168 ioapic 0 pin 18
triggering 1 polarity 1
(XEN) io_apic.c:2132:
(XEN) ioapic_guest_write: apic=0, pin=18, old_irq=18, new_irq=18
(XEN) ioapic_guest_write: old_entry=0000a0a8, new_entry=0001a0a8
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 9.830355] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ
18
[ 9.871039] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@xxxxxxxxxx
[ 9.884950] usb 6-1: default language 0x0409
[ 9.891186] cpuidle: using governor ladder
[ 9.895313] cpuidle: using governor menu
[ 9.902083] usbcore: registered new interface driver hiddev
[ 9.909330] usbcore: registered new interface driver usbhid
[ 9.917219] usbhid: v2.6:USB HID core driver
[ 9.925463] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 9.933440] usb 6-1: New USB device found, idVendor=045e, idProduct=0083
[ 9.943482] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.955603] usb 6-1: Product: Basic Optical Mouse
[ 9.961664] usb 6-1: Manufacturer: Microsoft
[ 9.967799] usb 6-1: uevent
[ 9.969946] usb 6-1: usb_probe_device
[ 9.975820] usb 6-1: configuration #1 chosen from 1 choice
modprobe: FATAL: Could not load /lib/modules/2.6.30-rc6-tip/modules.dep: No
such file or directory
[ 9.998089] usb 6-1: adding 6-1:1.0 (config #1, interface 0)
[ 10.006169] usb 6-1:1.0: uevent
[ 10.012248] usbhid 6-1:1.0: usb_probe_interface
[ 10.018248] usbhid 6-1:1.0: usb_probe_interface - got id
[ 10.026492] modprobe used greatest stack depth: 5904 bytes left
[ 10.034607] ALSA device list:
[ 10.040471] No soundcards found.
[ 10.044557] Netfilter messages via NETLINK v0.30.
[ 10.050595] nf_conntrack version 0.5.0 (6144 buckets, 24576 max)
[ 10.060994] input: Microsoft Basic Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input3
[ 10.074995] generic-usb 0003:045E:0083.0001: input,hidraw0: USB HID v1.10
Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 10.095102]
/mnt/data/xen/vanilla/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c:
creating file '002'
[ 10.109254] hub 6-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 10.117394] ctnetlink v0.93: registering with nfnetlink.
[ 10.125683] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.133436] TCP cubic registered
[ 10.139475] Initializing XFRM netlink socket
[ 10.145711] hub 1-0:1.0: hub_suspend
[ 10.149592] usb usb1: bus auto-suspend
[ 10.155638] ehci_hcd 0000:00:1a.7: suspend root hub
[ 10.161907] NET: Registered protocol family 10
[ 10.170468] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.175898] IPv6 over IPv4 tunneling driver
[ 10.182305] NET: Registered protocol family 17
[ 10.190142] RPC: Registered udp transport module.
[ 10.198081] RPC: Registered tcp transport module.
[ 10.204529] IO APIC resources couldn't be allocated.
[ 10.210359] PM: Resume from disk failed.
[ 10.216271] registered taskstats version 1
[ 10.222441] Magic number: 1:820:469
[ 10.228482] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 10.238559] Freeing unused kernel memory: 504k freed
[ 10.246631] Write protecting the kernel read-only data: 7936k
Loading, please wait...
Couldnt get a file descriptor referring to the console
[ 10.341084] console_setup used greatest stack depth: 5584 bytes left
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
[ 10.393919] usb usb7: suspend_rh (auto-stop)
[ 10.393958] usb 6-2: skipped 1 descriptor after interface
[ 10.393963] usb 6-2: skipped 1 descriptor after interface
[ 10.393967] usb 6-2: New USB device found, idVendor=0566, idProduct=3002
[ 10.393971] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home