That is cool that SOL worked easily. I just found that Fedora had the AMT sol
client gamt that was mentioned earlier. I will have to try it out.
I will check some of the stuff out that you sent. One thing that jumped right
out:
(XEN) [VT-D]dmar.c:401: RMRR address range not in reserved memory base
= bdc00000 end = ffffffffbfffffff; iommu_inclusive_mapping=1 parameter
That looks like an invalid RMRR value so there are probably some issues with
this particular BIOS version. Though the iommu_inclusive_mapping=1 should have
gotten you by that issue if it was causing the hang so there are probably other
problems.
Thanks
Ross
-----Original Message-----
From: Tim Kaufmann [mailto:tk@xxxxxxxxxx]
Sent: Monday, April 27, 2009 5:16 PM
To: Ross Philipson
Cc: Pasi Kärkkäinen; xen-devel
Subject: Re: [Xen-devel] No VT-d with Xen 3.3/3.4rc3 on Intel-Board DQ45CB
Got SOL workin'.
Grub looks like this:
title Xen 3.4.0-rc3-pre / Debian GNU/Linux, kernel 2.6.18.8-
xen
root (hd0,0)
kernel /xen-3.4.0-rc3-pre.gz console=com1
com1=115200,8n1,0xe1c0,0
module /vmlinuz-2.6.18.8-xen root=/dev/mapper/raidvg-lv--
dom0--root ro console=tty0
module /initrd.img-2.6.18.8-xen
I'm using amtterm on the client machine. It's in Debian testing
currently, but can easily be downloaded and installed via dpkg -i in
Ubuntu 8.04 LTS.
I connected to AMT with
amtterm -u admin -p supersecretpassword 10.11.1.31
As soon as I rebooted the AMT computer the client was receiving data.
Attached is the output of booting with iommu=1. For reasons unknown,
the lines I quoted as an example a couple of mails ago aren't in there.
Tim
Some tags for Google: Xen SOL Serial over LAN Intel AMT Console DQ45CB
root@obelix:~# amtterm -u admin -p ****** 10.11.1.31
amtterm: NONE -> CONNECT (connection to host)
ipv4 10.11.1.31 [10.11.1.31] 16994 open
amtterm: CONNECT -> INIT (redirection initialization)
amtterm: INIT -> AUTH (session authentication)
amtterm: AUTH -> INIT_SOL (serial-over-lan initialization)
amtterm: INIT_SOL -> RUN_SOL (serial-over-lan active)
serial-over-lan redirection ok
connected now, use ^] to escape
__ __ _____ _ _ ___ _____
\ \/ /___ _ __ |___ /| || | / _ \ _ __ ___|___ / _ __ _ __
___
\ // _ \ '_ \ |_ \| || |_| | | |__| '__/ __| |_ \ __| '_ \|
'__/ _ \
/ \ __/ | | | ___) |__ _| |_| |__| | | (__ ___) |__| |_) | |
| __/
/_/\_\___|_| |_| |____(_) |_|(_)___/ |_| \___|____/ | .__/|_|
\___|
|_|
(XEN) Xen version 3.4.0-rc3-pre (root@xxxxxxxxxxxxxxxxxx) (gcc version
4.3.2 (Debian 4.3.2-1.1) ) Sun Apr 26 16:00:39 CEST 2009
(XEN) Latest ChangeSet: Fri Apr 24 13:46:17 2009 +0100
19575:dc5bd14a4675
(XEN) Command line: console=com1 com1=115200,8n1,0xe1c0,0 iommu=1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 5 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e800 (usable)
(XEN) 000000000009e800 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bd6c1000 (usable)
(XEN) 00000000bd6c1000 - 00000000bd703000 (ACPI NVS)
(XEN) 00000000bd703000 - 00000000bd826000 (reserved)
(XEN) 00000000bd826000 - 00000000bd83a000 (ACPI NVS)
(XEN) 00000000bd83a000 - 00000000bd93c000 (reserved)
(XEN) 00000000bd93c000 - 00000000bd93d000 (ACPI NVS)
(XEN) 00000000bd93d000 - 00000000bd942000 (reserved)
(XEN) 00000000bd942000 - 00000000bd94c000 (ACPI data)
(XEN) 00000000bd94c000 - 00000000bd967000 (ACPI NVS)
(XEN) 00000000bd967000 - 00000000bd986000 (reserved)
(XEN) 00000000bd986000 - 00000000bd98c000 (ACPI NVS)
(XEN) 00000000bd98c000 - 00000000bdb00000 (usable)
(XEN) 00000000bdc00000 - 00000000c0000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000023c000000 (usable)
(XEN) System RAM: 8087MB (8281932kB)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
(XEN) ACPI: XSDT BD94AE18, 005C (r1 INTEL DQ45CB 4F MSFT
10013)
(XEN) ACPI: FACP BD949D98, 00F4 (r4 INTEL A M I 6222004 MSFT
10013)
(XEN) ACPI: DSDT BD942018, 6818 (r1 INTEL DQ45CB 4F INTL
20051117)
(XEN) ACPI: FACS BD952F40, 0040
(XEN) ACPI: APIC BD949F18, 006C (r2 INTEL DQ45CB 4F MSFT
10013)
(XEN) ACPI: MCFG BD954E18, 003C (r1 INTEL DQ45CB 4F
MSFT 97)
(XEN) ACPI: ASF! BD953D18, 00A0 (r32 INTEL DQ45CB 4F TFSM
F4240)
(XEN) ACPI: SPCR BD954D18, 0050 (r1 INTEL DQ45CB 4F
AMI. 3)
(XEN) ACPI: TCPA BD954C98, 0032 (r2 INTEL DQ45CB 4F MSFT
1000013)
(XEN) ACPI: DMAR BD93CC18, 0120 (r1 INTEL DQ45CB 4F
INTL 1)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000023c000000
(XEN) Domain heap initialised
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI: wakeup_vec[bd952f4c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 7:7 APIC version 20
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) [VT-D]dmar.c:485: Host address width 36
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1b.0
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed91000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.1
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:3.3
(XEN) [VT-D]dmar.c:494: found ACPI_DMAR_DRHD
(XEN) [VT-D]dmar.c:349: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:358: found INCLUDE_ALL
(XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.1
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1d.7
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.1
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.2
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:1a.7
(XEN) [VT-D]dmar.c:498: found ACPI_DMAR_RMRR
(XEN) [VT-D]dmar.c:401: RMRR address range not in reserved memory base
= bdc00000 end = ffffffffbfffffff; iommu_inclusive_mapping=1 parameter
may be needed.
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.0
(XEN) [VT-D]dmar.c:300: found endpoint: bdf = 0:2.1
(XEN) Intel VT-d DMAR tables have been parsed.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2833.099 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: VMX enabled
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
(XEN) Booting processor 2/2 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU2 has no CMCI support
(XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
(XEN) Booting processor 3/3 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 6144K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU3 has no CMCI support
(XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home