| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] iSCSI problems
The way I setup my dom-Us to use iscsi was with individual targets for
each dom-U and I used the iscsi-init driver from sf.net to boot directly
from the IETD (iscsi-target) server.
By doing this, I completely bypassed having to do any block IO on dom-0
thus making my dom-Us completely free of being dependant on dom-0 block
devices.
iscsi-init is fairly easy to setup. You create it as a kernel module and
load it via an initrd. It pulls it's sda target information from the
kernel line in the dom-u config file very similarly to ethernet
configuration via kernel parameters.
It worked for many months very stably in Xen-1.2 and xen-2.0.4 for
me. :)
On Mon, 2005-10-31 at 11:12 +0000, Edwards, Nigel (Nigel Edwards) wrote:
> Hi,
> I am having problems getting iSCSI working with xen. I can access
> iSCSI drives fine from Xen0 (e.g. untar a 500MB archive and I don't
> see problems reported through dmesg or /proc/kmsg). However, if I try
> to project them into an instance of XenU as a scsi device to boot the
> unprivileged domain I get an oops in Xen0 - often resulting in the
> whole machine crashing. This occurs in the very early stages of boot
> of xenU.
>
> I am using linux-iscsi-4.0.2 for iscsi_sfnet.ko
> scsi_transport_iscsi.ko is being built in linux-2.6.12-xen0
> I downloaded xen-unstable-src.tgz October 25th.
>
> I notice that there appear to be some significant differences between
> scsi_transport_iscsi.c in linux-iscsi-4.0.2 and the version in
> linux-2.6.12 kernel.
>
> Example oops below. I have also attached the domain config file. I am
> not sure what to do next to get this working. Any suggestions would
> be appreciated. If you have iSCSI working, if you could drop me a note
> indicating what code and modules you are using I would be very grateful.
>
> Cheers,
> Nigel.
>
>
> <1>Unable to handle kernel paging request at virtual address f3d55000
> <1> printing eip:
> <4>c0147bec
> <1>*pde = ma 030cb067 pa 000cb067
> <1>*pte = ma 00000000 pa 55555000
> <1>Oops: 0002 [#1]
> <4>PREEMPT
> <4>Modules linked in: crc32c md5 iscsi_sfnet scsi_transport_iscsi
> sworks_agp agpgart
> <4>CPU: 0
> <4>EIP: 0061:[<c0147bec>] Not tainted VLI
> <4>EFLAGS: 00010292 (2.6.12.6-xen0)
> <4>EIP is at buffered_rmqueue+0x19c/0x340
> <4>eax: 00000000 ebx: 00000001 ecx: 00000400 edx: f3d55000
> <4>esi: c167aaa0 edi: f3d55000 ebp: 00000000 esp: ecb41dd4
> <4>ds: 007b es: 007b ss: 0069
> <4>Process ifup (pid: 30665, threadinfo=ecb40000 task=f2180040)
> <4>Stack: c167aaa0 00000003 00000000 eeda60c0 c0147660 c167aaa0 c050c5c0
> 00000000
> <4> 00000000 000084d0 c0147f2f c050c5c0 00000000 00000010 00000000
> 00000000
> <4> 00000000 00000000 00000000 f2180040 00000010 c050c92c 00000000
> c011cbd3
> <4>Call Trace:
> <4> [<c0147660>] prep_new_page+0x50/0x60
> <4> [<c0147f2f>] __alloc_pages+0xcf/0x430
> <4> [<c011cbd3>] mm_init+0xa3/0xe0
> <4> [<c0116c71>] pte_alloc_one+0x11/0x30
> <4> [<c0153ab2>] pte_alloc_map+0x42/0x200
> <4> [<c0153d9f>] copy_pte_range+0x2f/0x330
> <4> [<c0154137>] copy_page_range+0x97/0xd0
> <4> [<c011d0e5>] copy_mm+0x285/0x3d0
> <4> [<c05aece0>] BusLogic_ProbeHostAdapter+0xe0/0x170
> <4> [<c011db77>] copy_process+0x407/0xe10
> <4> [<c011e685>] do_fork+0x75/0x19f
> <4> [<c012dbc5>] sys_rt_sigprocmask+0x95/0x140
> <4> [<c0107ae1>] sys_fork+0x31/0x40
> <4> [<c0109365>] syscall_call+0x7/0xb
> <4>Code: 8b 74 24 14 31 ed 89 f6 8d bc 27 00 00 00 00 89 34 24 bf 03 00
> 00 00 89 7c 24 04 e8 6f 1d fd ff 89 c2 89 c7 b9
> 00 04 00 00 89 e8 <f3> ab 89 14 24 b9 03 00 00 00 83 c6 20 89 4c 24 04
> e8 ae 1d fd
> <4> <6>note: ifup[30665] exited with preempt_count 2
> <3>scheduling while atomic: ifup/0x00000002/30665
> <4> [<c046fa61>] schedule+0x681/0x760
> <4> [<c011fcc1>] release_console_sem+0x71/0x190
> <4> [<c011fa4f>] vprintk+0x1df/0x330
> <4> [<c0470d66>] rwsem_down_read_failed+0xc6/0x1e0
> <4> [<c0123860>] .text.lock.exit+0x27/0x87
> <4> [<c0122087>] do_exit+0xa7/0x410
> <4> [<c0109d65>] die+0x1c5/0x1d0
> <4> [<c0117fe4>] do_page_fault+0x3e4/0x65b
> <4> [<c011b40a>] __wake_up+0x4a/0xb0
> <4> [<c01e8461>] journal_stop+0x171/0x2f0
> <4> [<c01da350>] ext3_mark_inode_dirty+0x50/0x60
> <4> [<c01ded34>] __ext3_journal_stop+0x24/0x50
> <4> [<c014ae56>] __do_page_cache_readahead+0xa6/0x270
> <4> [<c01da3d1>] ext3_dirty_inode+0x71/0x90
> <4> [<c01da360>] ext3_dirty_inode+0x0/0x90
> <4> [<c018eb36>] __mark_inode_dirty+0x116/0x1e0
> <4> [<c0124e21>] current_fs_time+0x51/0x70
> <4> [<c01096ee>] page_fault+0x2e/0x34
> <4> [<c0147bec>] buffered_rmqueue+0x19c/0x340
> <4> [<c0147660>] prep_new_page+0x50/0x60
> <4> [<c0147f2f>] __alloc_pages+0xcf/0x430
> <4> [<c011cbd3>] mm_init+0xa3/0xe0
> <4> [<c0116c71>] pte_alloc_one+0x11/0x30
> <4> [<c0153ab2>] pte_alloc_map+0x42/0x200
> <4> [<c0153d9f>] copy_pte_range+0x2f/0x330
> <4> [<c0154137>] copy_page_range+0x97/0xd0
> <4> [<c011d0e5>] copy_mm+0x285/0x3d0
> <4> [<c05aece0>] BusLogic_ProbeHostAdapter+0xe0/0x170
> <4> [<c011db77>] copy_process+0x407/0xe10
> <4> [<c011e685>] do_fork+0x75/0x19f
> <4> [<c012dbc5>] sys_rt_sigprocmask+0x95/0x140
> <4> [<c0107ae1>] sys_fork+0x31/0x40
> <4> [<c0109365>] syscall_call+0x7/0xb
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
signature.asc
Description: This is a digitally signed message part
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home