| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] can't save domain
Sorry I missed some important info from xfrd.log
Here it is again:
6682 [INF] XFRD> Accepted connection from 127.0.0.1:1027 on 2
6865 [INF] XFRD> Xfr service for 127.0.0.1:1027
[DEBUG] Conn_init> flags=1
[DEBUG] Conn_init> write stream...
[DEBUG] stream_init>mode=w flags=1 compress=0
[DEBUG] stream_init> unbuffer...
[DEBUG] stream_init< err=0
[DEBUG] Conn_init> read stream...
[DEBUG] stream_init>mode=r flags=1 compress=0
[DEBUG] stream_init> unbuffer...
[DEBUG] stream_init< err=0
[DEBUG] Conn_sxpr>
(xfr.hello 1 0)[DEBUG] Conn_sxpr< err=0
[DEBUG] Conn_sxpr>
(xfr.save 1 "(domain (id 1) (name VM1) (memory 31) (maxmem 32768) (state -b---)
(cpu 0) (cpu_time 11.561731071) (up_time 177.706912041) (start_time
1107773243.83) (console (status listening) (id 12) (domain 1) (local_port 12)
(remote_port 1) (console_port 9601)) (devices (vif (idx 0) (vif 0) (mac
aa:00:00:00:00:11) (bridge xen-br1) (evtchn 14 4) (index 0)) (vbd (idx 0) (vdev
770) (device 1792) (mode w) (dev hda2) (uname file:/root/vmdisk1) (node
/dev/loop0) (index 0)) (vbd (idx 1) (vdev 775) (device 775) (mode r) (dev hda7)
(uname phy:hda7) (node hda7) (index 1)) (vbd (idx 2) (vdev 771) (device 773)
(mode w) (dev hda3) (uname phy:hda5) (node hda5) (index 2))) (config (vm (name
VM1) (memory 32) (cpu 1) (image (linux (kernel /boot/vmlinuz-2.6.10-xenU) (root
'/dev/hda2 ro') (args '3 VMID=1'))) (device (vbd (uname file:/root/vmdisk1)
(dev hda2) (mode w))) (device (vbd (uname phy:hda7) (dev hda7) (mode r)))
(device (vbd (uname phy:hda5) (dev hda3) (mode w))) (device (vif (mac aa:0
0:00:00:00:11) (bridge xen-br1))))))" /root/vm1.image)[DEBUG] Conn_sxpr< err=0
[1107773421.550889] xc_linux_save start 1
xc_linux_save start 1
[1107773421.551005] HZY > before mapping the shared info frame
HZY > before mapping the shared info frame
before mmap
: Illegal seek
HZY > after mmap: Illegal seek
[1107773421.551059] HZY > before mapping pfn_to_mfn_frame_list
HZY > before mapping pfn_to_mfn_frame_list
before mmap
: Illegal seek
HZY > after mmap: Illegal seek
[1107773421.551094] HZY> before mapping the mfn_to_pfn table,
mfn_to_pfn_table_start_mfn is: c00
HZY> before mapping the mfn_to_pfn table, mfn_to_pfn_table_start_mfn is:
c00before mmap
: Illegal seek
HZY > after mmap: Illegal seek
HZY > ioctl error: Bad address
HZY > after munmap: Bad address
HZY> after memcpy
--------------------------
Zhiyi from EPFL Switzerland
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel
|
|
|
| |
|
Home