Re: [Xen-devel] problems with xen-br0

["Fajar A. Nugraha" <fajar@xxxxxxxxxxxx>]

Ronald G. Minnich wrote:

> still can't get packets to route correctly if xen sets up xen-br0. 
>
> Here are interfaces after xend start
>
> eth0      Link encap:Ethernet  HWaddr 00:D0:59:CD:55:9B  
>          inet addr:10.128.207.119  Bcast:10.128.255.255  Mask:255.255.0.0
>  
[snip]

> xen-br0   Link encap:Ethernet  HWaddr 00:D0:59:CD:55:9B  
>          inet addr:10.128.207.119  Bcast:10.128.255.255  
>  
[snip]

> but they're not making it through to anywhere else. 
>
> So bridging does not seem to be happening. 
>
> If I do a showmacs I can even see the dom1 mac in there. 
>
> Now, if I do this: 
> ifconfig eth0 172.16.233.1
> ifconfig xen-br0 172.16.233.1
>
> everything is fine -- no shock, the plan 9 domain has ip 172.16.233.201. 
>
> So, if xen-br0 is actually bridging, I can't see it happening. 
>
>  
What IS your network address for eth0 and xen-br0 anyway?
172.16.233.0 or 10.128.207.0?
Generally speaking, devices in a bridge should be on the same network.

Regards,

Fajar


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel