The attachment of this post includes a zipped boot dump
of a vanilla 2.4 (non-Xen) kernel, with TW_DEBUG set.
So it shows the 3ware debug output of a successfull boot and
can be used to compare it with my earlier post which
included the debug output of the non successfull boot
of the 2.4 xen kernel with the 3ware controller.
*********** REPLY SEPARATOR ***********
On 11.08.2004 at 09:51 Christian Limpach wrote:
>On Wed, Aug 11, 2004 at 01:47:11AM +0200, Sven Kretzschmar wrote:
>> Unresolved symbols in ...../3w-xxxx.o
>> depmod: force_evtchn_callback
>> looks like a missing EXPORT_SYMBOL statement, but I am
>> not sure if this has anything to do with my problems when
>> booting with the 3ware drivers compiled into the kernel; I think
>> it hasn't ...
>Keir has fixed this.
>> OK, I attached now the output while booting with TW_DEBUG=1.
>> Caveat: It's from the 2.4. Xenolinux, because that compiled quicker :-/
>> Don't pay too much attention at that part:
>> "3w-xxxx: tw_check_bits(): No expected bits (0x13025000).
>> 3w-xxxx: tw_poll_status(): Unexpected bits."
>> ...because it also shows up when booting a vanilla 2.4.26 kernel
>> (successfully !), but without the endless loop.
>Are you sure it gets into an endless loop? Because you indicated
>earlier that it does find both cards, so it should find the 2nd
>card after a long stream of tw_check_bits/tw_poll_status messages.
>Because the interesting part will be after it found both cards and
>tries to use them... At least PCI setup und interrupt routing
>> BTW: How can I catch the output of a normal 2.4.26 kernel via
>> serial line ? What kernel options do I have to set exactly ?
>> I tried "com1=115200,8n1 console=ttyS0" like with xenolinux,
>> but it did not work ?
>You need to enable the serial drivers (on by default) and there's
>a console on serial line just next to it. The syntax for the
>command line is: console=ttyS0,115200n8
>I don't know if a com1= option is supported...
>> Tomorrow I will also try to boot only with one 3ware controller;
>> currently, there are 2 controllers connected to the machine.
>> And I will send you the output of a 2.6. kernel, if still necessary
>Please try to get the output after the endless loop or confirm that
>it doesn't find the 2nd card without TW_DEBUG set.
Description: Zip archive