Jim,
I'm using the tagged revision and I was able to compile it. Thanks!!
Now I'll try to install it with sfcb
Jose
-----Original Message-----
From: Jim Fehlig [mailto:jfehlig@xxxxxxxxxx]
Sent: Wednesday, October 10, 2007 5:07 PM
To: Olcese, Jose
Cc: xen-cim@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-cim] Xen CIM on sfcb
Olcese, Jose wrote:
>
> Raj,
>
>
>
> Thanks for your response.
>
> I tried using the XEN-CIM providers included in SLES10SP1 but those
> are installed for the openWBEM broker and I need to use SFCB.
>
You will need to rebuild for sfcb. I tagged the hg repo for SP1
http://xenbits2.xensource.com/ext/os-cmpi-xen.hg?rev/aad84ea2d09e
so you could use that c/s or of course just the src rpm included with SP1.
NB - I have never build Xen-CIM against sfcb and it's been quite some
time since I built with OpenPegasus. In theory though should not be a
problem since all of the providers are CMPI.
> I installed sfcb, then copied the .mof from XEN-CIM and executed
> sfcbrepos -f but the only schema that seems to work is 2.16
> experimental which leaves sfcb DB inconsistent....
>
The mof included with Xen-CIM should work with 2.15 experimental. The
cim-schema rpm included with SP1 contains some of the required mof from
2.15 -- see /usr/share/mof/cimv2.14/cimv2.15-unreleased. The Xen-CIM
project itself contains mof files that were not yet publicly released
when SP1 was shipped -- see schema/dmtf directory in Xen-CIM project.
Also, the top-level Makefile.am contains rules for compiling/registering
schema. Looking at that may help.
Regards,
Jim
>
>
> Jose
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> *From:* Subrahmanian, Raj [mailto:raj.subrahmanian@xxxxxxxxxx]
> *Sent:* Wednesday, October 10, 2007 12:50 PM
> *To:* Olcese, Jose; xen-cim@xxxxxxxxxxxxxxxxxxx
> *Subject:* RE: [Xen-cim] Xen CIM on sfcb
>
>
>
> Jose,
>
> The xen-cim in the repository works with the tip of xen-unstable. So,
> you will have to pull down the latest tree and compile and install it.
>
> Alternatively, you can use the xen-cim providers from SLES 10 SP1.
> They will work with the xen that comes with SP1 (I believe that is 3.0.4).
>
> Raj
>
>
>
> ------------------------------------------------------------------------
>
> *From:* xen-cim-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-cim-bounces@xxxxxxxxxxxxxxxxxxx] *On Behalf Of
> *Olcese, Jose
> *Sent:* Wednesday, October 10, 2007 11:33 AM
> *To:* xen-cim@xxxxxxxxxxxxxxxxxxx
> *Subject:* [Xen-cim] Xen CIM on sfcb
>
> Guys,
>
>
>
> I'm trying to install XEN-CIM on top of sfcb but I'm not having
> success...
>
> I've tried with several combinations of XEN 3.0.4, XEN 3.1, SFCB
> 1.2.3, SFCB 1.2.4, CIM Schema 2.15 Final, CIM Schema 2.16 Final,
> CIM Schema 2.16 Experimental, and latest XEN-CIM source....
>
>
>
> When I try to compile the latest XEN-CIM in a machine with XEN
> 3.0.4, I get an error about the function
> xen_session_get_this_host. I see the Xen prototype that has a
> different # of parameters...
>
>
>
> I have SLES10SP1 32 bits and I want XEN 3.0.4.
>
>
>
> Jose
>
>
>
>
>
> *José Olcese*
>
> Argentina Software Development Center
>
> jose.olcese@xxxxxxxxx <mailto:jose.olcese@xxxxxxxxx>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-cim mailing list
> Xen-cim@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-cim
>
_______________________________________________
Xen-cim mailing list
Xen-cim@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-cim
|
Home