| |
|
 |
|
 |
|
|
|
| |
|
|
xen-changelog
[Xen-changelog] [xen-unstable] Add guide to using the kexec and kdump fa
# HG changeset patch
# User Keir Fraser <keir.fraser@xxxxxxxxxx>
# Date 1218465887 -3600
# Node ID f9062ba4c54f579a239ec9f1dc5841885339865b
# Parent 265d42af434be26372bc5342456ddca97f1c7743
Add guide to using the kexec and kdump facility in xen.
Signed-off-by: Simon Horman <horms@xxxxxxxxxxxx>
---
docs/misc/kexec_and_kdump.txt | 213 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 213 insertions(+)
diff -r 265d42af434b -r f9062ba4c54f docs/misc/kexec_and_kdump.txt
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/docs/misc/kexec_and_kdump.txt Mon Aug 11 15:44:47 2008 +0100
@@ -0,0 +1,213 @@
+
+=======================
+Kexec and Kdump for Xen
+=======================
+
+This is a breif guide to using Kexec and Kdump in conjunction with Xen.
+This functionaly works at the level of the hypervisor and dom0 kernel.
+And will thus affect all guests running on a machine.
+
+At this stage it does not work in conjunction with domU kernels.
+
+This document should be read in conjunction with
+Documentation/kdump/kdump.txt from the Linux kernel source.
+Some of the information in this document has been
+sourced from that document.
+
+
+Kexec
+=====
+
+It is possible to kexec from Xen or Linux to either Xen or Linux.
+
+Pattern | Before Kexec | After Kexec
+---------------+--------------------+--------------------
+Xen -> Xen | first hypervisor & | second hypervisor &
+ | dom0 kernel | dom0 kernel
+---------------+--------------------+--------------------
+Xen -> Linux | first hypervisor & | second kernel
+ | dom0 kernel |
+---------------+--------------------+--------------------
+Linux -> Xen | first kernel | second hypervisor &
+ | | dom0 kernel
+---------------+--------------------+--------------------
+Linux -> Linux | first kernel | second kernel
+
+If you are kexecing to Xen then you will also need to preapare the second
+hypervisor and dom0 kernel that will run after kexec. These may be the same
+as the first hypervisor and dom0 kernel that are used before kexec if you
+are kexecing from Xen to Xen.
+
+If you are kexecing to Linux then you will need to prepare the second Linux
+kernel that will run after kexec. In the case that you are kexecing from
+Linux, it may be the same as the first kernel image that that runs before
+kexec.
+
+Regardless of which kexec pattern you wish to run, you will
+need to have kexec-tools installed. This provides the kexec command.
+
+1. Load
+-------
+
+Before kexecing the second kernel or hypervisor & dom0 kernel
+need to be loaded into the running hypervisor or kernel using
+the kexec command.
+
+ a. To kexec to Xen (Xen->Xen or Linux->Xen)
+
+ kexec -l --append="XEN_ARGS -- DOM0_ARGS" \
+ --vmm="XEN_IMAGE" "DOM0_IMAGE" KEXEC_ARGS
+
+ where:
+ XEN_ARGS: command line arguments to the xen hypervisor
+ On x86 the no-real-mode argument should be included
+ DOM0_ARGS: command line arguments to the dom0 kernel
+ XEN_IMAGE: xen hypervisor image
+ DOM0_IMAGE: dom0 kernel image
+ KEXEC_ARGS: additional kexec-tools command line arguments
+
+ e.g. kexec -l --append "no-real-mode" --vmm="/boot/xen.gz" /boot/vmlinuz.gz
+
+ OR
+
+ b. To kexec to Linux (Xen->Linux or Linux->Linux)
+
+ kexec -l LINUX_IMAGE --append "$LINUX_ARGS" KEXEC_ARGS
+
+ where:
+ LINUX_IMAGE: the second linux kernel image
+ LINUX_ARGS: command line arguments to the second linux kernel
+ KEXEC_ARGS: additional kexec-tools command line arguments
+
+ e.g. kexec -l /boot/second-vmlinuz.gz
+
+2. Execute
+----------
+
+Once the second kernel is loaded, it can be executed at any time.
+If you don't see the second kernel booting within a second or so,
+you are in trouble :(
+
+ kexec -e
+
+Kdump
+=====
+
+It is possible to kdump from Xen or Linux to a Linux crash kernel.
+It is not possible to use xen as a crash kernel.
+
+Pattern | Before Kexec | After Kexec
+---------------+--------------------+--------------------
+Xen -> Linux | first hypervisor & | crash kernel
+ | dom0 kernel |
+---------------+--------------------+--------------------
+Linux -> Linux | first kernel | crash kernel
+
+Regardless of if you are kdumping from Xen or Linux you will need to
+prepare a linux crash kernel. You will also need to have kexec-tools
+installed. This provides the kexec command.
+
+0. Set-Up The Crash Kernel Region
+---------------------------------
+
+In order to use kdump an area of memory has to be reserved at boot time.
+This is the area of memory that the crash kernel will use, thus allowing it
+to run without disrupting the memory used by the first kernel. This area is
+called the crash kernel region and is reserved using the crashkernel
+command line parameter to the Xen hypervisor. It has two forms:
+
+ i) crashkernel=size
+
+ This is the simplest and recommended way to reserve the crash kernel
+ region. Just specify how large the region should be and the hypervisor
+ will find a good location for it. A good size to start with is 128Mb
+
+ e.g.
+
+ crashkernel=128M
+
+ ii) crashkernel=size@base
+
+ In this form the base address is provided in addition to
+ the size. Use this if auto-placement doesn't work for some reason.
+ It is strongly recommended that the base address be aligned
+ to 64Mb, else memory below the alignment point will not
+ be usable.
+
+ e.g. crashkernel=128M@256M
+
+ Regardless of which of the two forms of the crashkernel command line you
+ use, the crash kernel region should appear in /proc/iomem on x86 or
+ /proc/iomem_machine on ia64. If it doesn't then either the crashkernel
+ parameter is missing, or for some reason the region couldn't be placed -
+ for instance because it is too large.
+
+ # cat /proc/iomem
+ ...
+ 00100000-07feffff : System RAM
+ 00100000-00bfffff : Hypervisor code and data
+ 0533f000-0733efff : Crash kernel
+ ...
+
+
+1. Load
+-------
+
+Once you are running in a kexec-enabled hypervisor and dom0,
+you can prepare to kdump by loading the crash kernel into the
+running kernel.
+
+ kexec -p CRASH_KERNEL_IMAGE --append "$CRASH_KERNEL_ARGS" KEXEC_ARGS
+
+ where:
+ CRASH_KERNEL_IMAGE: the crash kernel image
+ CRASH_KERNEL_ARGS: command line arguments to the crash kernel
+ init 1 is strongly recommended
+ irqpoll is strongly recommended
+ maxcpus=1 is required if the crash kernel is SMP
+ reset_devices is strongly recommended
+ KEXEC_ARGS: additional kexec-tools command line arguments
+ On x86 --args-linux should be supplied if an uncompressed
+ vmlinux image is used as the crash kernel
+
+ e.g. kexec -p /boot/crash-vmlinuz \
+ --append "init 1 irqpoll maxcpus=1 reset_devices" --args-linux
+
+On x86 systems the crash kernel may be either
+- A uncompressed vmlinux image if the kernel is not relocatable
+- A compressed bzImage or vmlinuz image if the kernel is relocatable
+- Relocatability is crontroled by the CONFIG_RELOCATABLE kernel
+ compile configuration parameter. This option may not be available
+ depending on the kernel version
+On ia64
+ Either a vmlinuz or vmlinux.gz image may be used
+
+
+2. Execute
+----------
+
+Once the second kernel is loaded, the crash kernel will be executed if the
+hypervisor panics. It will also be executed if dom0 panics or if dom0
+oopses and /proc/sys/kernel/panic_on_oops is set to a non-zero value
+
+echo 1 > /proc/sys/kernel/panic_on_oops
+
+Kdump may also be triggered (for testing)
+
+ a. From Domain 0
+
+ echo c > /proc/sysrq-trigger
+
+ b. From Xen
+
+ Enter the xen console
+
+ ctrl^a ctrl^a (may be bound to a different key, this is the default)
+
+ Select C for "trigger a crashdump"
+
+ C
+
+If you don't see the crash kernel booting within a second or so,
+you are in trouble :(
+
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
| <Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Xen-changelog] [xen-unstable] Add guide to using the kexec and kdump facility in xen.,
Xen patchbot-unstable <=
|
|
|
| |
|
Home