# HG changeset patch
# User Keir Fraser <keir.fraser@xxxxxxxxxx>
# Date 1203343472 0
# Node ID 6d55b1f3f22973754b991797bf8947ebc862c88d
# Parent 1d9487ed5e6f22fe0ca727caa6fc256fc75f15f4
x86: physaddr_bitsize must always be initialised for 32-on-64 dom0.
Signed-off-by: Keir Fraser <keir.fraser@xxxxxxxxxx>
xen-unstable changeset: 16993:eef22fa42f44cf4f8d971a37dd265fc56eb35417
xen-unstable date: Thu Feb 07 13:20:15 2008 +0000
---
xen/arch/x86/domain_build.c | 44 ++++++++++++++++++--------------------------
1 files changed, 18 insertions(+), 26 deletions(-)
diff -r 1d9487ed5e6f -r 6d55b1f3f229 xen/arch/x86/domain_build.c
--- a/xen/arch/x86/domain_build.c Mon Feb 18 14:04:07 2008 +0000
+++ b/xen/arch/x86/domain_build.c Mon Feb 18 14:04:32 2008 +0000
@@ -292,9 +292,6 @@ int __init construct_dom0(
compatible = 1;
break;
case 4: /* x86_64 */
-#ifndef CONFIG_COMPAT
- printk(" Xen kernel: 64-bit, lsb\n");
-#else
printk(" Xen kernel: 64-bit, lsb, compat32\n");
if (elf_32bit(&elf) && parms.pae == PAEKERN_bimodal)
parms.pae = PAEKERN_extended_cr3;
@@ -303,7 +300,6 @@ int __init construct_dom0(
compat32 = 1;
compatible = 1;
}
-#endif
if (elf_64bit(&elf) && machine == EM_X86_64)
compatible = 1;
break;
@@ -323,7 +319,7 @@ int __init construct_dom0(
return -EINVAL;
}
-#ifdef CONFIG_COMPAT
+#if defined(__x86_64__)
if ( compat32 )
{
l1_pgentry_t gdt_l1e;
@@ -346,34 +342,32 @@ int __init construct_dom0(
flush_tlb_one_local(GDT_LDT_VIRT_START + FIRST_RESERVED_GDT_BYTE);
}
#endif
+
if ( parms.pae == PAEKERN_extended_cr3 )
set_bit(VMASST_TYPE_pae_extended_cr3, &d->vm_assist);
- if ( UNSET_ADDR != parms.virt_hv_start_low && elf_32bit(&elf) )
- {
-#if CONFIG_PAGING_LEVELS < 4
+ if ( (parms.virt_hv_start_low != UNSET_ADDR) && elf_32bit(&elf) )
+ {
unsigned long mask = (1UL << L2_PAGETABLE_SHIFT) - 1;
+ value = (parms.virt_hv_start_low + mask) & ~mask;
+ BUG_ON(!is_pv_32bit_domain(d));
+#if defined(__i386__)
+ if ( value > HYPERVISOR_VIRT_START )
+ panic("Domain 0 expects too high a hypervisor start address.\n");
#else
- unsigned long mask = is_pv_32bit_domain(d)
- ? (1UL << L2_PAGETABLE_SHIFT) - 1
- : (1UL << L4_PAGETABLE_SHIFT) - 1;
-#endif
-
- value = (parms.virt_hv_start_low + mask) & ~mask;
-#ifdef CONFIG_COMPAT
+ if ( value > __HYPERVISOR_COMPAT_VIRT_START )
+ panic("Domain 0 expects too high a hypervisor start address.\n");
HYPERVISOR_COMPAT_VIRT_START(d) =
max_t(unsigned int, m2p_compat_vstart, value);
+#endif
+ }
+
+#if defined(__x86_64__)
+ if ( is_pv_32on64_domain(d) )
d->arch.physaddr_bitsize =
fls((1UL << 32) - HYPERVISOR_COMPAT_VIRT_START(d)) - 1
+ (PAGE_SIZE - 2);
- if ( value > (!is_pv_32on64_domain(d) ?
- HYPERVISOR_VIRT_START :
- __HYPERVISOR_COMPAT_VIRT_START) )
-#else
- if ( value > HYPERVISOR_VIRT_START )
-#endif
- panic("Domain 0 expects too high a hypervisor start address.\n");
- }
+#endif
/*
* Why do we need this? The number of page-table frames depends on the
@@ -702,7 +696,6 @@ int __init construct_dom0(
mfn++;
}
-#ifdef CONFIG_COMPAT
if ( is_pv_32on64_domain(d) )
{
/* Ensure the first four L3 entries are all populated. */
@@ -724,7 +717,6 @@ int __init construct_dom0(
&compat_idle_pg_table_l2[l2_table_offset(HIRO_COMPAT_MPT_VIRT_START)],
COMPAT_L2_PAGETABLE_XEN_SLOTS(d) * sizeof(*l2tab));
}
-#endif
/* Pages that are part of page tables must be read only. */
l4tab = l4start + l4_table_offset(vpt_start);
@@ -885,7 +877,7 @@ int __init construct_dom0(
si->console.dom0.info_size = sizeof(struct dom0_vga_console_info);
}
-#ifdef CONFIG_COMPAT
+#if defined(__x86_64__)
if ( is_pv_32on64_domain(d) )
xlat_start_info(si, XLAT_start_info_console_dom0);
#endif
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home