# HG changeset patch
# User kaf24@xxxxxxxxxxxxxxxxxxxx
# Node ID adb70d525dbdf62a82d9705df3d09216f5bdac5c
# Parent 89ed236b6b66a66e2f0b0fb977e48cd943ce9dc1
This trivial patch makes sure that mem-map.sxp and the qemu bits
get installed in /usr/lib64 on distributions that want things
there.
Signed-off-by: Rik van Riel <riel@xxxxxxxxxx>
diff -r 89ed236b6b66 -r adb70d525dbd .hgignore
--- a/.hgignore Tue Sep 13 10:42:15 2005
+++ b/.hgignore Tue Sep 13 10:49:04 2005
@@ -60,8 +60,6 @@
^pristine-.*$
^ref-.*$
^tools/.*/build/lib.*/.*\.py$
-^tools/Makefile\.smh$
-^tools/balloon/balloon$
^tools/blktap/Makefile\.smh$
^tools/blktap/blkcow$
^tools/blktap/blkcowgnbd$
@@ -85,8 +83,7 @@
^tools/blktap/ublkback/ublkback$
^tools/blktap/xen/.*$
^tools/check/\..*$
-^tools/cmdline/.*$
-^tools/cmdline/xen/.*$
+^tools/examples/xmexample\.vmx$
^tools/console/xenconsoled$
^tools/console/xenconsole$
^tools/debugger/pdb/pdb$
@@ -109,8 +106,6 @@
^tools/firmware/vmxassist/roms\.h$
^tools/firmware/vmxassist/vmxassist$
^tools/firmware/vmxassist/vmxloader$
-^tools/gdb/gdb-6\.2\.1-linux-i386-xen/.*$
-^tools/gdb/gdb-6\.2\.1/.*$
^tools/ioemu/config-host\..*$
^tools/ioemu/keysym_adapter_sdl\.h$
^tools/ioemu/keysym_adapter_vnc\.h$
@@ -141,12 +136,9 @@
^tools/vnet/vnet-module/\..*\.cmd$
^tools/vnet/vnet-module/\.tmp_versions/.*$
^tools/vnet/vnet-module/vnet_module\.mod\..*$
-^tools/vnetd/vnetd$
^tools/vtpm/vtpm*
^tools/vtpm/tpm_emulator-*
^tools/vtpm_manager/manager/vtpm_managerd
-^tools/web-shutdown\.tap$
-^tools/x2d2/minixend$
^tools/xcutils/xc_restore$
^tools/xcutils/xc_save$
^tools/xenstat/xentop/xentop$
diff -r 89ed236b6b66 -r adb70d525dbd tools/examples/Makefile
--- a/tools/examples/Makefile Tue Sep 13 10:42:15 2005
+++ b/tools/examples/Makefile Tue Sep 13 10:49:04 2005
@@ -25,7 +25,7 @@
XEN_SCRIPTS += block-file
XEN_SCRIPTS += block-enbd
-XEN_BOOT_DIR = /usr/lib/xen/boot
+XEN_BOOT_DIR = /usr/$(LIBDIR)/xen/boot
XEN_BOOT = mem-map.sxp
XEN_HOTPLUG_DIR = /etc/hotplug
@@ -37,12 +37,15 @@
install: all install-initd install-configs install-scripts install-boot \
install-hotplug
+xmexample.vmx: xmexample.vmx.in
+ sed -e 's/@@LIBDIR@@/$(LIBDIR)/' < $< > $@
+
install-initd:
[ -d $(DESTDIR)/etc/init.d ] || $(INSTALL_DIR) $(DESTDIR)/etc/init.d
$(INSTALL_PROG) $(XEND_INITD) $(DESTDIR)/etc/init.d
$(INSTALL_PROG) $(XENDOMAINS_INITD) $(DESTDIR)/etc/init.d
-install-configs:
+install-configs: $(XEN_CONFIGS)
[ -d $(DESTDIR)$(XEN_CONFIG_DIR) ] || \
$(INSTALL_DIR) $(DESTDIR)$(XEN_CONFIG_DIR)
[ -d $(DESTDIR)$(XEN_CONFIG_DIR)/auto ] || \
@@ -77,3 +80,4 @@
done
clean:
+ $(RM) xmexample.vmx
diff -r 89ed236b6b66 -r adb70d525dbd tools/ioemu/target-i386-dm/Makefile
--- a/tools/ioemu/target-i386-dm/Makefile Tue Sep 13 10:42:15 2005
+++ b/tools/ioemu/target-i386-dm/Makefile Tue Sep 13 10:49:04 2005
@@ -3,7 +3,7 @@
include config.mak
override TARGET_ARCH=i386
-INSTALL_DIR := $(DESTDIR)/usr/lib/xen/bin
+INSTALL_DIR := $(DESTDIR)/usr/$(LIBDIR)/xen/bin
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_ARCH)
VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw:$(SRC_PATH)/audio
DEFINES=-I. -I$(TARGET_PATH) -I$(SRC_PATH) -I$(XEN_ROOT)/xen/include/public
diff -r 89ed236b6b66 -r adb70d525dbd tools/examples/xmexample.vmx.in
--- /dev/null Tue Sep 13 10:42:15 2005
+++ b/tools/examples/xmexample.vmx.in Tue Sep 13 10:49:04 2005
@@ -0,0 +1,96 @@
+# -*- mode: python; -*-
+#============================================================================
+# Python configuration setup for 'xm create'.
+# This script sets the parameters used when a domain is created using 'xm
create'.
+# You use a separate script for each domain you want to create, or
+# you can set the parameters for the domain on the xm command line.
+#============================================================================
+
+#----------------------------------------------------------------------------
+# Kernel image file.
+kernel = "/usr/@@LIBDIR@@/xen/boot/vmxloader"
+
+# The domain build function. VMX domain uses 'vmx'.
+builder='vmx'
+
+# Initial memory allocation (in megabytes) for the new domain.
+memory = 128
+
+# A name for your domain. All domains must have different names.
+name = "ExampleVMXDomain"
+
+# Which CPU to start domain on?
+#cpu = -1 # leave to Xen to pick
+
+# Optionally define mac and/or bridge for the network interfaces.
+# Random MACs are assigned if not given.
+#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
+
+#----------------------------------------------------------------------------
+# Define the disk devices you want the domain to have access to, and
+# what you want them accessible as.
+# Each disk entry is of the form phy:UNAME,DEV,MODE
+# where UNAME is the device, DEV is the device name the domain will see,
+# and MODE is r for read-only, w for read-write.
+
+#disk = [ 'phy:hda1,hda1,r' ]
+disk = [ 'file:/var/images/min-el3-i386.img,ioemu:hda,w' ]
+
+#----------------------------------------------------------------------------
+# Set according to whether you want the domain restarted when it exits.
+# The default is 'onreboot', which restarts the domain when it shuts down
+# with exit code reboot.
+# Other values are 'always', and 'never'.
+
+#restart = 'onreboot'
+
+#============================================================================
+
+
+# New stuff
+device_model = '/usr/@@LIBDIR@@/xen/bin/qemu-dm'
+
+# Advanced users only. Don't touch if you don't know what you're doing
+memmap = '/usr/@@LIBDIR@@/xen/boot/mem-map.sxp'
+
+#-----------------------------------------------------------------------------
+# Disk image for
+#cdrom=
+
+#-----------------------------------------------------------------------------
+# boot on floppy (a), hard disk (c) or CD-ROM (d)
+#boot=[a|c|d]
+#-----------------------------------------------------------------------------
+# write to temporary files instead of disk image files
+#snapshot=1
+
+#----------------------------------------------------------------------------
+# enable SDL library for graphics, default = 0
+sdl=0
+
+#----------------------------------------------------------------------------
+# enable VNC library for graphics, default = 1
+vnc=1
+
+#----------------------------------------------------------------------------
+# enable spawning vncviewer(only valid when vnc=1), default = 1
+vncviewer=1
+
+#----------------------------------------------------------------------------
+# no graphics, use serial port
+#nographic=0
+
+
+#-----------------------------------------------------------------------------
+# enable audio support
+#enable-audio=1
+
+
+#-----------------------------------------------------------------------------
+# set the real time clock to local time [default=0 i.e. set to utc]
+#localtime=1
+
+
+#-----------------------------------------------------------------------------
+# start in full screen
+#full-screen=1
diff -r 89ed236b6b66 -r adb70d525dbd tools/examples/xmexample.vmx
--- a/tools/examples/xmexample.vmx Tue Sep 13 10:42:15 2005
+++ /dev/null Tue Sep 13 10:49:04 2005
@@ -1,96 +0,0 @@
-# -*- mode: python; -*-
-#============================================================================
-# Python configuration setup for 'xm create'.
-# This script sets the parameters used when a domain is created using 'xm
create'.
-# You use a separate script for each domain you want to create, or
-# you can set the parameters for the domain on the xm command line.
-#============================================================================
-
-#----------------------------------------------------------------------------
-# Kernel image file.
-kernel = "/usr/lib/xen/boot/vmxloader"
-
-# The domain build function. VMX domain uses 'vmx'.
-builder='vmx'
-
-# Initial memory allocation (in megabytes) for the new domain.
-memory = 128
-
-# A name for your domain. All domains must have different names.
-name = "ExampleVMXDomain"
-
-# Which CPU to start domain on?
-#cpu = -1 # leave to Xen to pick
-
-# Optionally define mac and/or bridge for the network interfaces.
-# Random MACs are assigned if not given.
-#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
-
-#----------------------------------------------------------------------------
-# Define the disk devices you want the domain to have access to, and
-# what you want them accessible as.
-# Each disk entry is of the form phy:UNAME,DEV,MODE
-# where UNAME is the device, DEV is the device name the domain will see,
-# and MODE is r for read-only, w for read-write.
-
-#disk = [ 'phy:hda1,hda1,r' ]
-disk = [ 'file:/var/images/min-el3-i386.img,ioemu:hda,w' ]
-
-#----------------------------------------------------------------------------
-# Set according to whether you want the domain restarted when it exits.
-# The default is 'onreboot', which restarts the domain when it shuts down
-# with exit code reboot.
-# Other values are 'always', and 'never'.
-
-#restart = 'onreboot'
-
-#============================================================================
-
-
-# New stuff
-device_model = '/usr/lib/xen/bin/qemu-dm'
-
-# Advanced users only. Don't touch if you don't know what you're doing
-memmap = '/usr/lib/xen/boot/mem-map.sxp'
-
-#-----------------------------------------------------------------------------
-# Disk image for
-#cdrom=
-
-#-----------------------------------------------------------------------------
-# boot on floppy (a), hard disk (c) or CD-ROM (d)
-#boot=[a|c|d]
-#-----------------------------------------------------------------------------
-# write to temporary files instead of disk image files
-#snapshot=1
-
-#----------------------------------------------------------------------------
-# enable SDL library for graphics, default = 0
-sdl=0
-
-#----------------------------------------------------------------------------
-# enable VNC library for graphics, default = 1
-vnc=1
-
-#----------------------------------------------------------------------------
-# enable spawning vncviewer(only valid when vnc=1), default = 1
-vncviewer=1
-
-#----------------------------------------------------------------------------
-# no graphics, use serial port
-#nographic=0
-
-
-#-----------------------------------------------------------------------------
-# enable audio support
-#enable-audio=1
-
-
-#-----------------------------------------------------------------------------
-# set the real time clock to local time [default=0 i.e. set to utc]
-#localtime=1
-
-
-#-----------------------------------------------------------------------------
-# start in full screen
-#full-screen=1
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
Home