http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=696
------- Comment #5 from tukker@xxxxxxxxx 2006-07-07 16:06 -------
Subject: Re: MacBook reboots spontanously with Xen
Tried it,
it reboots right after the rule mentioning "Scrubbing memory".
The dmesg of the current (non Xen) system is below and the .config of my Xen
unstable kernel is attached. Hope this helps.
Raymond.
-----dmesg----
Linux version 2.6.16-1.2289_FC6 (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 4.1.1 20060612 (Red Hat 4.1.1-3)) #1 SMP Thu Jun 15 14:31:35
EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ede10 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003e0d1000 (usable)
BIOS-e820: 000000003e0d1000 - 000000003e2d2000 (ACPI NVS)
BIOS-e820: 000000003e2d2000 - 000000003ee75000 (ACPI data)
BIOS-e820: 000000003ee75000 - 000000003ee7d000 (reserved)
BIOS-e820: 000000003ee7d000 - 000000003eeae000 (ACPI data)
BIOS-e820: 000000003eeae000 - 000000003eeaf000 (reserved)
BIOS-e820: 000000003eeaf000 - 000000003eec2000 (ACPI data)
BIOS-e820: 000000003eec2000 - 000000003eeef000 (ACPI NVS)
BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data)
BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
96MB HIGHMEM available.
895MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 254161
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225279 pages, LIFO batch:31
HighMem zone: 24786 pages, LIFO batch:7
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v002 APPLE ) @ 0x000fe020
ACPI: XSDT (v001 APPLE Apple00 0x0000005f 0x01000013) @ 0x3eefd120
ACPI: FADT (v003 APPLE Apple00 0x0000005f Loki 0x0000005f) @ 0x3eefb000
ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eefa000
ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef9000
ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef8000
ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef7000
ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef6000
ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef5000
ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL 0x20050309) @ 0x3eebf000
ACPI: SSDT (v001 APPLE SataSec 0x00001000 INTL 0x20050309) @ 0x3eebe000
ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x3eeef000
ACPI: DSDT (v001 APPLE MacBook 0x00010001 INTL 0x20050309) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
console=tty0
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c079f000 soft=c077f000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 998916k/1016644k available (2116k kernel code, 16980k reserved,
1182k data, 240k init, 99144k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1997.347 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 3999.62 BogoMIPS
(lpj=7999240)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000140 0000c1a9
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07a0000 soft=c0780000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3994.84 BogoMIPS
(lpj=7989694)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000140 0000c1a9
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
Total of 2 processors activated (7994.46 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 1808k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 1000-1fff
MEM window: 90200000-902fffff
PREFETCH window: 50000000-500fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 90100000-901fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 90000000-900fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1152320351.084:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key DD50001B2447E24B
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 16124K stolen memory.
agpgart: AGP aperture is 256M @ 0x80000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 209
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20c0-0x20c7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x20c8-0x20cf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: MATSHITADVD-R UJ-857, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices:
ADP1 LID0 PXS1 PXS2 USB1 USB2 USB3 USB4 USB7 EC
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 708k
SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
ata_piix 0000:00:1f.2: invalid MAP value 0
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x20D8 ctl 0x20FE bmdma 0x2020 irq 217
ata2: SATA max UDMA/133 cmd 0x20D0 ctl 0x20FA bmdma 0x2028 irq 217
ata1: dev 1 cfg 49:2f00 82:346b 83:7d09 84:6043 85:3469 86:3c09 87:6043
88:207f
ata1: dev 1 ATA-7, max UDMA/133, 156301488 sectors: LBA48
ata1: dev 1 configured for UDMA/133
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
Vendor: ATA Model: ST98823AS Rev: 7.01
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:1:0: Attached scsi disk sda
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1152320355.592:2): selinux=0 auid=4294967295
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0x90445400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 225, io base 0x000020a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:1:0: Attached scsi generic sg0 type 0
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (0.9.1)
ath_rate_sample: 1.2 (0.9.1)
ath_pci: 0.9.4.5 (0.9.1)
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 217, io base 0x00002080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 209, io base 0x00002060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 177, io base 0x00002040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:01:00.0 to 64
sky2 v1.4 addr 0x90200000 irq 177 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:16:cb:ce:85:8e
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:02:00.0 to 64
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.3 phy 6.1 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5424: mem=0x90100000, irq=169
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
input: Apple Computer Apple Internal Keyboard / Trackpad as
/class/input/input0
input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as
/class/input/input1
input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as
/class/input/input2
input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 217
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[217]
MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
hw_random hardware driver 1.0.0 loaded
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on
usb-0000:00:1d.2-2
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
input: HID 05ac:1000 as /class/input/input3
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /class/input/input4
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016cbfffedd6cce]
floppy0: no floppy controllers found
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
hda: packet command error: error=0x50 { LastFailedSense=0x05 }
ide: failed opcode was: unknown
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1
extents:1 across:2031608k
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (7942 buckets, 63536 max) - 224 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
process `sysctl' is using deprecated sysctl (syscall)
net.ipv6.neigh.lo.base_reachable_time; Use
net.ipv6.neigh.lo.base_reachable_time_ms instead.
ath0: no IPv6 routers present
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
sky2 eth0: disabling interface
usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret
-84
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
usb 5-1: USB disconnect, address 2
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
usb 5-1: new full speed USB device using uhci_hcd and address 3
usb 5-1: configuration #1 chosen from 1 choice
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
------- dmesg -------
2006/7/5, Raymond <tukker@xxxxxxxxx>:
>
> Ok, I'll try that somewhere tomorrow.
>
> Thanks.
>
> Raymond.
>
> 2006/7/5, bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
> <bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
> >:
>
> > http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=696
> >
> >
> >
> >
> >
> > ------- Comment #3 from ian.pratt@xxxxxxxxxxxx 2006-07-05 07:16 -------
> > First thing to try is switching to xen-unstable.hg and using the -xen
> > kernel
> > you get from there. Not sure there's anything relevant, but the vmx code
> > has
> > quite a few fixes.
> >
> >
> > --
> > Configure bugmail:
> > http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email
> > ------- You are receiving this mail because: -------
> > You reported the bug, or are watching the reporter.
> >
>
>
Tried it, <br><br>it reboots right after the rule mentioning "Scrubbing
memory".<br><br>The dmesg of the current (non Xen) system is below and the
.config of my Xen unstable kernel is attached. Hope this helps.<br>
<br>Raymond.<br><br><br>-----dmesg----<br>Linux version 2.6.16-1.2289_FC6 (<a
href="mailto:brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx";>brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx</a>)
(gcc version 4.1.1 20060612 (Red Hat 4.1.1-3
)) #1 SMP Thu Jun 15 14:31:35 EDT 2006<br>BIOS-provided physical RAM
map:<br> BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)<br> BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)<br> BIOS-e820: 00000000000ede10 - 0000000000100000 (reserved)
<br> BIOS-e820: 0000000000100000 - 000000003e0d1000
(usable)<br> BIOS-e820: 000000003e0d1000 - 000000003e2d2000 (ACPI
NVS)<br> BIOS-e820: 000000003e2d2000 - 000000003ee75000 (ACPI
data)<br> BIOS-e820: 000000003ee75000 - 000000003ee7d000 (reserved)
<br> BIOS-e820: 000000003ee7d000 - 000000003eeae000 (ACPI
data)<br> BIOS-e820: 000000003eeae000 - 000000003eeaf000
(reserved)<br> BIOS-e820: 000000003eeaf000 - 000000003eec2000 (ACPI
data)<br> BIOS-e820: 000000003eec2000 - 000000003eeef000 (ACPI NVS)
<br> BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI
data)<br> BIOS-e820: 000000003ef00000 - 0000000040000000
(reserved)<br> BIOS-e820: 00000000e0000000 - 00000000f0000000
(reserved)<br> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<br> BIOS-e820: 00000000fed14000 - 00000000fed1a000
(reserved)<br> BIOS-e820: 00000000fed1c000 - 00000000fed20000
(reserved)<br> BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)<br> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
<br>96MB HIGHMEM available.<br>895MB LOWMEM available.<br>Using x86 segment
limits to approximate NX protection<br>On node 0 totalpages: 254161<br>
DMA zone: 4096 pages, LIFO batch:0<br> Normal zone: 225279 pages, LIFO
batch:31
<br> HighMem zone: 24786 pages, LIFO batch:7<br>DMI 2.4 present.<br>Using
APIC driver default<br>ACPI: RSDP (v002
APPLE
) @ 0x000fe020<br>ACPI: XSDT (v001 APPLE Apple00
0x0000005f 0x01000013) @ 0x3eefd120
<br>ACPI: FADT (v003 APPLE Apple00 0x0000005f Loki 0x0000005f) @
0x3eefb000<br>ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki
0x0000005f) @ 0x3eefa000<br>ACPI: MADT (v001 APPLE Apple00
0x00000001 Loki 0x0000005f) @ 0x3eef9000
<br>ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @
0x3eef8000<br>ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki
0x0000005f) @ 0x3eef7000<br>ACPI: SBST (v001 APPLE Apple00
0x00000001 Loki 0x0000005f) @ 0x3eef6000
<br>ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @
0x3eef5000<br>ACPI: SSDT (v001 APPLE SataPri 0x00001000 INTL
0x20050309) @ 0x3eebf000<br>ACPI: SSDT (v001 APPLE SataSec
0x00001000 INTL 0x20050309) @ 0x3eebe000
<br>ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL
0x20050309) @ 0x3eeef000<br>ACPI: DSDT (v001 APPLE MacBook
0x00010001 INTL 0x20050309) @ 0x00000000<br>ACPI: PM-Timer IO Port:
0x408<br>ACPI: Local APIC address 0xfee00000
<br>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)<br>Processor #0 6:14
APIC version 20<br>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01]
enabled)<br>Processor #1 6:14 APIC version 20<br>ACPI: LAPIC_NMI (acpi_id[0x00]
high edge lint[0x1])
<br>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])<br>ACPI: IOAPIC
(id[0x01] address[0xfec00000] gsi_base[0])<br>IOAPIC[0]: apic_id 1, version 32,
address 0xfec00000, GSI 0-23<br>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
dfl dfl)
<br>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)<br>ACPI: IRQ0
used by override.<br>ACPI: IRQ2 used by override.<br>ACPI: IRQ9 used by
override.<br>Enabling APIC mode: Flat. Using 1 I/O APICs<br>ACPI:
HPET id: 0x8086a201 base: 0xfed00000
<br>Using ACPI (MADT) for SMP configuration information<br>Allocating PCI
resources starting at 50000000 (gap: 40000000:a0000000)<br>Built 1
zonelists<br>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
console=tty0
<br>mapped APIC to ffffd000 (fee00000)<br>mapped IOAPIC to ffffc000
(fec00000)<br>Enabling fast FPU save and restore... done.<br>Enabling unmasked
SIMD FPU exception support... done.<br>Initializing CPU#0<br>CPU 0 irqstacks,
hard=c079f000 soft=c077f000
<br>PID hash table entries: 4096 (order: 12, 16384 bytes)<br>Console: colour
VGA+ 80x25<br>Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)<br>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<br>Memory: 998916k/1016644k available (2116k kernel code, 16980k reserved,
1182k data, 240k init, 99144k highmem)<br>Checking if this processor honours
the WP bit even in supervisor mode... Ok.<br>hpet0: at MMIO 0xfed00000 (virtual
0xf8800000), IRQs 2, 8, 0
<br>hpet0: 3 64-bit timers, 14318180 Hz<br>Using HPET for base-timer<br>Using
HPET for gettimeofday<br>Detected 1997.347 MHz processor.<br>Using hpet for
high-res timesource<br>Calibrating delay using timer specific routine..
3999.62 BogoMIPS (lpj=7999240)<br>Security Framework v1.0.0
initialized<br>SELinux: Initializing.<br>SELinux: Starting in
permissive mode<br>selinux_register_security: Registering secondary
module capability<br>Capability LSM initialized as secondary
<br>Mount-cache hash table entries: 512<br>CPU: After generic identify, caps:
bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000<br>CPU: After
vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000
00000000
<br>monitor/mwait feature present.<br>using mwait in idle threads.<br>CPU: L1 I
cache: 32K, L1 D cache: 32K<br>CPU: L2 cache: 2048K<br>CPU: Physical Processor
ID: 0<br>CPU: Processor Core ID: 0<br>CPU: After all inits, caps: bfe9f3ff
00100000 00000000 00000140 0000c1a9 00000000 00000000
<br>Intel machine check architecture supported.<br>Intel machine check
reporting enabled on CPU#0.<br>Checking 'hlt' instruction... OK.<br>SMP
alternatives: switching to UP code<br>CPU0: Intel Genuine Intel(R)
CPU T2500 @
2.00GHz stepping 08<br>SMP alternatives: switching to SMP code<br>Booting
processor 1/1 eip 3000<br>CPU 1 irqstacks, hard=c07a0000
soft=c0780000<br>Initializing CPU#1<br>Calibrating delay using timer specific
routine.. 3994.84
BogoMIPS (lpj=7989694)<br>CPU: After generic identify, caps: bfe9fbff 00100000
00000000 00000000 0000c1a9 00000000 00000000<br>CPU: After vendor identify,
caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
<br>monitor/mwait feature present.<br>CPU: L1 I cache: 32K, L1 D cache:
32K<br>CPU: L2 cache: 2048K<br>CPU: Physical Processor ID: 0<br>CPU: Processor
Core ID: 1<br>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00000140
0000c1a9 00000000 00000000
<br>Intel machine check architecture supported.<br>Intel machine check
reporting enabled on CPU#1.<br>CPU1: Intel Genuine Intel(R)
CPU T2500 @
2.00GHz stepping 08<br>Total of 2 processors activated (7994.46 BogoMIPS).
<br>ENABLING IO-APIC IRQs<br>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1
pin2=-1<br>checking TSC synchronization across 2 CPUs: passed.<br>Brought up 2
CPUs<br>migration_cost=4000<br>checking if image is initramfs... it is
<br>Freeing initrd memory: 1808k freed<br>NET: Registered protocol family
16<br>ACPI: bus type pci registered<br>PCI: Using MMCONFIG<br>Setting up
standard PCI resources<br>ACPI: Subsystem revision 20060127<br>ACPI: Found ECDT
<br>ACPI: Interpreter enabled<br>ACPI: Using IOAPIC for interrupt
routing<br>ACPI: PCI Root Bridge [PCI0] (0000:00)<br>PCI: Probing PCI hardware
(bus 00)<br>Boot video device is 0000:00:02.0<br>PCI: Ignoring BAR0-3 of IDE
controller 0000:00:
1f.1<br>PCI: Transparent bridge - 0000:00:1e.0<br>ACPI: PCI Interrupt Routing
Table [\_SB_.PCI0._PRT]<br>ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.RP01._PRT]<br>ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.RP02._PRT]
<br>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]<br>ACPI: PCI
Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)<br>ACPI: PCI Interrupt
Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)<br>ACPI: PCI Interrupt Link [LNKC]
(IRQs 1 3 4 5 6 7 10 12 14 15) *11
<br>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)<br>ACPI:
PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.<br>ACPI:
PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
<br>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11<br>ACPI:
PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)<br>ACPI: Embedded
Controller [EC] (gpe 23) interrupt mode.<br>Linux Plug and Play Support
v0.97 (c) Adam Belay<br>pnp: PnP ACPI init<br>pnp: PnP ACPI: found 10
devices<br>usbcore: registered new driver usbfs<br>usbcore: registered new
driver hub<br>PCI: Using ACPI for IRQ routing<br>PCI: If a device doesn't work,
try "pci=routeirq". If it helps, post a report
<br>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0<br>PCI: Bridge:
0000:00:1c.0<br> IO window: 1000-1fff<br> MEM window:
90200000-902fffff<br> PREFETCH window: 50000000-500fffff<br>PCI: Bridge:
0000:00:1c.1<br> IO window: disabled.
<br> MEM window: 90100000-901fffff<br> PREFETCH window:
disabled.<br>PCI: Bridge: 0000:00:1e.0<br> IO window: disabled.<br>
MEM window: 90000000-900fffff<br> PREFETCH window: disabled.<br>ACPI: PCI
Interrupt 0000:00:
1c.0[A] -> GSI 17 (level, low) -> IRQ 169<br>PCI: Setting latency timer
of device 0000:00:1c.0 to 64<br>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI
16 (level, low) -> IRQ 177<br>PCI: Setting latency timer of device 0000:00:
1c.1 to 64<br>PCI: Setting latency timer of device 0000:00:1e.0 to 64<br>NET:
Registered protocol family 2<br>IP route cache hash table entries: 32768
(order: 5, 131072 bytes)<br>TCP established hash table entries: 131072 (order:
9, 2621440 bytes)
<br>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)<br>TCP: Hash
tables configured (established 131072 bind 65536)<br>TCP reno
registered<br>apm: BIOS not found.<br>audit: initializing netlink socket
(disabled)
<br>audit(1152320351.084:1): initialized<br>highmem bounce pool size: 64
pages<br>Total HugeTLB memory allocated, 0<br>VFS: Disk quotas
dquot_6.5.1<br>Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)<br>SELinux: Registering netfilter hooks
<br>Initializing Cryptographic API<br>ksign: Installing public key
data<br>Loading keyring<br>- Added public key DD50001B2447E24B<br>- User ID:
Red Hat, Inc. (Kernel Module GPG key)<br>io scheduler noop registered<br>io
scheduler anticipatory registered
<br>io scheduler deadline registered<br>io scheduler cfq registered
(default)<br>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low)
-> IRQ 169<br>PCI: Setting latency timer of device 0000:00:1c.0 to
64<br>assign_interrupt_mode Found MSI capability
<br>Allocate Port Service[0000:00:1c.0:pcie00]<br>Allocate Port
Service[0000:00:1c.0:pcie02]<br>Allocate Port
Service[0000:00:1c.0:pcie03]<br>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI
16 (level, low) -> IRQ 177<br>
PCI: Setting latency timer of device 0000:00:1c.1 to
64<br>assign_interrupt_mode Found MSI capability<br>Allocate Port
Service[0000:00:1c.1:pcie00]<br>Allocate Port
Service[0000:00:1c.1:pcie02]<br>Allocate Port Service[0000:00:
1c.1:pcie03]<br>pci_hotplug: PCI Hot Plug PCI Core version: 0.5<br>ACPI: CPU0
(power states: C1[C1] C2[C2])<br>ACPI: Processor [CPU0] (supports 8 throttling
states)<br>ACPI: CPU1 (power states: C1[C1] C2[C2])<br>ACPI: Processor [CPU1]
(supports 8 throttling states)
<br>isapnp: Scanning for PnP cards...<br>isapnp: No Plug & Play device
found<br>Real Time Clock Driver v1.12ac<br>Non-volatile memory driver
v1.2<br>Linux agpgart interface v0.101 (c) Dave Jones<br>agpgart: Detected an
Intel 945GM Chipset.
<br>agpgart: Detected 16124K stolen memory.<br>agpgart: AGP aperture is 256M @
0x80000000<br>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled<br>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
blocksize
<br>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2<br>ide: Assuming
33MHz system bus speed for PIO modes; override with idebus=xx<br>ICH7: IDE
controller at PCI slot 0000:00:1f.1<br>ACPI: PCI Interrupt 0000:00:1f.1
[A] -> GSI 18 (level, low) -> IRQ 209<br>ICH7: chipset revision
2<br>ICH7: not 100% native mode: will probe irqs later<br>
ide0: BM-DMA at 0x20c0-0x20c7, BIOS settings: hda:DMA,
hdb:pio<br> ide1: BM-DMA at 0x20c8-0x20cf, BIOS settings:
hdc:pio, hdd:pio
<br>Probing IDE interface ide0...<br>hda: MATSHITADVD-R UJ-857, ATAPI
CD/DVD-ROM drive<br>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14<br>Probing IDE
interface ide1...<br>Probing IDE interface ide1...<br>ide-floppy driver
0.99.newide
<br>usbcore: registered new driver libusual<br>usbcore: registered new driver
hiddev<br>usbcore: registered new driver
usbhid<br>drivers/usb/input/hid-core.c: v2.6:USB HID core driver<br>PNP: No
PS/2 controller found. Probing ports directly.
<br>i8042.c: No controller found.<br>mice: PS/2 mouse device common for all
mice<br>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27<br>md: bitmap
version 4.39<br>TCP bic registered<br>Initializing IPsec netlink socket
<br>NET: Registered protocol family 1<br>NET: Registered protocol family
17<br>Using IPI No-Shortcut mode<br>ACPI wakeup devices:<br>ADP1 LID0 PXS1 PXS2
USB1 USB2 USB3 USB4 USB7 EC<br>ACPI: (supports S0 S3 S4
S5)<br>Freeing unused kernel memory: 240k freed
<br>Write protecting the kernel read-only data: 708k<br>SCSI subsystem
initialized<br>libata version 1.20 loaded.<br>ata_piix 0000:00:1f.2: version
1.05<br>ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]<br>ata_piix 0000:00:1f.2
: invalid MAP value 0<br>PCI: Enabling device 0000:00:1f.2 (0005 ->
0007)<br>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 217<br>PCI: Setting latency timer of device 0000:00:1f.2 to 64<br>ata1:
SATA max UDMA/133 cmd 0x20D8 ctl 0x20FE bmdma 0x2020 irq 217
<br>ata2: SATA max UDMA/133 cmd 0x20D0 ctl 0x20FA bmdma 0x2028 irq 217<br>ata1:
dev 1 cfg 49:2f00 82:346b 83:7d09 84:6043 85:3469 86:3c09 87:6043
88:207f<br>ata1: dev 1 ATA-7, max UDMA/133, 156301488 sectors: LBA48<br>ata1:
dev 1 configured for UDMA/133
<br>scsi0 : ata_piix<br>ata2: SATA port has no device.<br>scsi1 :
ata_piix<br> Vendor: ATA Model:
ST98823AS Rev: 7.01<br>
Type:
Direct-Access
ANSI SCSI revision: 05<br>SCSI device sda: 156301488 512-byte hdwr sectors
(80026 MB)
<br>sda: Write Protect is off<br>sda: Mode Sense: 00 3a 00 00<br>SCSI device
sda: drive cache: write back<br>SCSI device sda: 156301488 512-byte hdwr
sectors (80026 MB)<br>sda: Write Protect is off<br>sda: Mode Sense: 00 3a 00 00
<br>SCSI device sda: drive cache: write back<br> sda: sda1 sda2 sda3
sda4<br>sd 0:0:1:0: Attached scsi disk sda<br>device-mapper: 4.6.0-ioctl
(2006-02-17) initialised: <a
href="mailto:dm-devel@xxxxxxxxxx";>dm-devel@xxxxxxxxxx
</a><br>kjournald starting. Commit interval 5 seconds<br>EXT3-fs: mounted
filesystem with ordered data mode.<br>SELinux: Disabled at
runtime.<br>SELinux: Unregistering netfilter
hooks<br>audit(1152320355.592:2): selinux=0 auid=4294967295
<br>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ
225<br>PCI: Setting latency timer of device 0000:00:1d.7 to 64<br>ehci_hcd
0000:00:1d.7: EHCI Host Controller<br>ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 1
<br>ehci_hcd 0000:00:1d.7: debug port 1<br>PCI: cache line size of 32 is not
supported by device 0000:00:1d.7<br>ehci_hcd 0000:00:1d.7: irq 225, io mem
0x90445400<br>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
<br>usb usb1: configuration #1 chosen from 1 choice<br>hub 1-0:1.0: USB hub
found<br>hub 1-0:1.0: 8 ports detected<br>USB Universal Host Controller
Interface driver v3.0<br>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21
(level, low) -> IRQ 225
<br>PCI: Setting latency timer of device 0000:00:1d.0 to 64<br>uhci_hcd
0000:00:1d.0: UHCI Host Controller<br>uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 2<br>uhci_hcd 0000:00:1d.0: irq 225, io base
0x000020a0
<br>usb usb2: configuration #1 chosen from 1 choice<br>hub 2-0:1.0: USB hub
found<br>hub 2-0:1.0: 2 ports detected<br>sd 0:0:1:0: Attached scsi generic sg0
type 0<br>ath_hal: module license 'Proprietary' taints kernel.<br>
ath_hal: <a href="http://0.9.17.2";>0.9.17.2</a> (AR5210, AR5211, AR5212,
RF5111, RF5112, RF2413, RF5413)<br>wlan: <a href="http://0.8.4.2";>0.8.4.2</a>
(0.9.1)<br>ath_rate_sample: 1.2 (0.9.1)<br>ath_pci: <a href="http://0.9.4.5";>
0.9.4.5</a> (0.9.1)<br>ieee1394: Initialized config rom entry `ip1394'<br>ACPI:
PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217<br>PCI:
Setting latency timer of device 0000:00:1d.1 to 64<br>uhci_hcd 0000:00:
1d.1: UHCI Host Controller<br>uhci_hcd 0000:00:1d.1: new USB bus registered,
assigned bus number 3<br>uhci_hcd 0000:00:1d.1: irq 217, io base
0x00002080<br>usb usb3: configuration #1 chosen from 1 choice<br>hub 3-0:1.0:
USB hub found
<br>hub 3-0:1.0: 2 ports detected<br>hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW
drive, 2048kB Cache, UDMA(66)<br>Uniform CD-ROM driver Revision: 3.20<br>ACPI:
PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
<br>PCI: Setting latency timer of device 0000:00:1d.2 to 64<br>uhci_hcd
0000:00:1d.2: UHCI Host Controller<br>uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 4<br>uhci_hcd 0000:00:1d.2: irq 209, io base
0x00002060
<br>usb usb4: configuration #1 chosen from 1 choice<br>hub 4-0:1.0: USB hub
found<br>hub 4-0:1.0: 2 ports detected<br>ACPI: PCI Interrupt 0000:00:1d.3[D]
-> GSI 16 (level, low) -> IRQ 177<br>PCI: Setting latency timer of device
0000:00:
1d.3 to 64<br>uhci_hcd 0000:00:1d.3: UHCI Host Controller<br>uhci_hcd
0000:00:1d.3: new USB bus registered, assigned bus number 5<br>uhci_hcd
0000:00:1d.3: irq 177, io base 0x00002040<br>usb usb5: configuration #1 chosen
from 1 choice
<br>hub 5-0:1.0: USB hub found<br>hub 5-0:1.0: 2 ports detected<br>ACPI: PCI
Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177<br>PCI:
Setting latency timer of device 0000:01:00.0 to 64<br>sky2 v1.4 addr 0x90200000
irq 177 Yukon-EC (0xb6) rev 2
<br>sky2 eth0: addr 00:16:cb:ce:85:8e<br>ACPI: PCI Interrupt 0000:02:00.0[A]
-> GSI 17 (level, low) -> IRQ 169<br>PCI: Setting latency timer of device
0000:02:00.0 to 64<br>usb 1-4: new high speed USB device using ehci_hcd and
address 3
<br>usb 1-4: configuration #1 chosen from 1 choice<br>wifi0: 11a rates: 6Mbps
9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps<br>wifi0: 11b rates: 1Mbps
2Mbps 5.5Mbps 11Mbps<br>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps
9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<br>wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps<br>wifi0: H/W encryption support: WEP AES AES_CCM TKIP<br>wifi0: mac
10.3 phy 6.1 radio 10.2<br>wifi0: Use hw queue 1 for WME_AC_BE
traffic<br>wifi0: Use hw queue 0 for WME_AC_BK traffic
<br>wifi0: Use hw queue 2 for WME_AC_VI traffic<br>wifi0: Use hw queue 3 for
WME_AC_VO traffic<br>wifi0: Use hw queue 8 for CAB traffic<br>wifi0: Use hw
queue 9 for beacons<br>wifi0: Atheros 5424: mem=0x90100000, irq=169<br>
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ
50<br>PCI: Setting latency timer of device 0000:00:1b.0 to 64<br>usb 2-2: new
full speed USB device using uhci_hcd and address 2<br>usb 2-2: configuration #1
chosen from 1 choice
<br>input: Apple Computer Apple Internal Keyboard / Trackpad as
/class/input/input0<br>input: USB HID v1.11 Keyboard [Apple Computer Apple
Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2<br>input: Apple Computer
Apple Internal Keyboard / Trackpad as /class/input/input1
<br>input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2<br>input: Apple Computer Apple Internal
Keyboard / Trackpad as /class/input/input2<br>input: USB HID v1.11 Device
[Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:
1d.0-2<br>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) ->
IRQ 217<br>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[217]
MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT
contexts=[8/8]<br>hw_random hardware driver
1.0.0 loaded<br>usb 4-2: new full speed USB device using uhci_hcd and address
2<br>usb 4-2: configuration #1 chosen from 1 choice<br>hiddev96: USB HID v1.11
Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2<br>
usb 5-1: new full speed USB device using uhci_hcd and address 2<br>usb 5-1:
configuration #1 chosen from 1 choice<br>input: HID 05ac:1000 as
/class/input/input3<br>input: USB HID v1.11 Keyboard [HID 05ac:1000] on
usb-0000:00:
1d.3-1<br>input: HID 05ac:1000 as /class/input/input4<br>input: USB HID v1.11
Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1<br>ieee1394: Host added:
ID:BUS[0-00:1023] GUID[0016cbfffedd6cce]<br>floppy0: no floppy
controllers found
<br>lp: driver loaded but no devices found<br>NET: Registered protocol family
10<br>lo: Disabled Privacy Extensions<br>IPv6 over IPv4 tunneling
driver<br>mtrr: no more MTRRs available<br>mtrr: no more MTRRs
available<br>mtrr: no more MTRRs available
<br>ACPI: AC Adapter [ADP1] (on-line)<br>ACPI: Battery Slot [BAT0] (battery
present)<br>ACPI: Power Button (FF) [PWRF]<br>ACPI: Lid Switch [LID0]<br>ACPI:
Power Button (CM) [PWRB]<br>ACPI: Sleep Button (CM) [SLPB]<br>ibm_acpi: ec
object not found
<br>ACPI: Video Device [GFX0] (multi-head: yes rom: no post:
no)<br>md: Autodetecting RAID arrays.<br>md: autorun ...<br>md: ... autorun
DONE.<br>hda: packet command error: status=0x51 { DriveReady SeekComplete Error
}<br>
hda: packet command error: error=0x50 { LastFailedSense=0x05 }<br>ide: failed
opcode was: unknown<br>EXT3 FS on dm-0, internal journal<br>kjournald
starting. Commit interval 5 seconds<br>EXT3 FS on sda3, internal journal
<br>EXT3-fs: mounted filesystem with ordered data mode.<br>Adding 2031608k swap
on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1
across:2031608k<br>ip6_tables: (C) 2000-2006 Netfilter Core Team<br>Netfilter
messages via NETLINK
v0.30.<br>ip_conntrack version 2.4 (7942 buckets, 63536 max) - 224 bytes per
conntrack<br>ip_tables: (C) 2000-2006 Netfilter Core Team<br>process `sysctl'
is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time
; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.<br>ath0: no IPv6
routers present<br>sky2 eth0: enabling interface<br>ADDRCONF(NETDEV_UP): eth0:
link is not ready<br>sky2 eth0: disabling interface<br>usb 5-1: usbfs:
USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
<br>Bluetooth: Core ver 2.8<br>NET: Registered protocol family 31<br>Bluetooth:
HCI device and connection manager initialized<br>Bluetooth: HCI socket layer
initialized<br>Bluetooth: L2CAP ver 2.8<br>Bluetooth: L2CAP socket layer
initialized
<br>Bluetooth: RFCOMM socket layer initialized<br>Bluetooth: RFCOMM TTY layer
initialized<br>Bluetooth: RFCOMM ver 1.7<br>usb 5-1: USB disconnect, address
2<br>Bluetooth: HIDP (Human Interface Emulation) ver 1.1<br>usb 5-1: new full
speed USB device using uhci_hcd and address 3
<br>usb 5-1: configuration #1 chosen from 1 choice<br>Bluetooth: HCI USB driver
ver 2.9<br>usbcore: registered new driver hci_usb<br>mtrr: no more MTRRs
available<br>mtrr: no more MTRRs available<br>mtrr: no more MTRRs available
<br>------- dmesg -------<br><div><span class="gmail_quote">2006/7/5, Raymond
<<a
href="mailto:tukker@xxxxxxxxx";>tukker@xxxxxxxxx</a>>:</span><blockquote
class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin:
0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div>Ok, I'll try that somewhere
tomorrow.<br><br>Thanks.<br><br>Raymond.<br><br><div><span
class="gmail_quote">2006/7/5, <a
href="mailto:bugzilla-daemon@xxxxxxxxxxxxxxxxxxx"; target="_blank"
onclick="return top.js.OpenExtLink(window,event,this)">
bugzilla-daemon@xxxxxxxxxxxxxxxxxxx</a> <<a
href="mailto:bugzilla-daemon@xxxxxxxxxxxxxxxxxxx"; target="_blank"
onclick="return top.js.OpenExtLink(window,event,this)">
bugzilla-daemon@xxxxxxxxxxxxxxxxxxx</a>>:</span></div><div><span class="e"
id="q_10c40a7fbcd08c8b_1"><blockquote class="gmail_quote" style="border-left:
1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<a href="http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=696";
target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=696</a><br><br><br><br><br><br>-------
Comment #3 from <a href="mailto:ian.pratt@xxxxxxxxxxxx"; target="_blank"
onclick="return top.js.OpenExtLink(window,event,this)">
ian.pratt@xxxxxxxxxxxx</a> 2006-07-05 07:16 -------<br>First thing
to try is switching to
xen-unstable.hg and using the -xen kernel<br>you get from there. Not sure
there's anything relevant, but the vmx code has<br>quite a few
fixes.<br><br><br>--<br>Configure bugmail: <a
href="http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email";
target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">
http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email</a><br>-------
You are receiving this mail because: -------<br>You reported the bug, or are
watching the reporter.<br></blockquote></span></div><div></div><br>
</div></blockquote></div><br>
--
Configure bugmail:
http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
_______________________________________________
Xen-bugs mailing list
Xen-bugs@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-bugs
|
Home