Add shadow VRAM to device model.
Signed-off-by: Don Dugger <donald.d.dugger@xxxxxxxxx>
--
Don Dugger
"Censeo Toto nos in Kansa esse decisse." - D. Gale
Donald.D.Dugger@xxxxxxxxx
Ph: (303)440-1368
diff -r 7d8efd4f1ac7 tools/ioemu/configure
--- a/tools/ioemu/configure Tue Mar 14 15:18:35 2006 +0100
+++ b/tools/ioemu/configure Tue Mar 14 15:47:32 2006 -0700
@@ -160,6 +160,8 @@ for opt do
;;
--fmod-inc=*) fmod_inc=${opt#--fmod-inc=}
;;
+ --disable-sse2) have_sse2="no"
+ ;;
--disable-vnc) vnc="no"
;;
--enable-mingw32) mingw32="yes" ; cross_prefix="i386-mingw32-"
@@ -225,6 +227,44 @@ if $cc -fno-reorder-blocks -fno-optimize
have_gcc3_options="yes"
fi
+# SSE2 - check if supported
+cat > $TMPC <<EOF
+#include <signal.h>
+#include <emmintrin.h>
+static inline unsigned int cpuid_edx(unsigned int op)
+{
+ unsigned int eax, edx;
+
+ __asm__("cpuid"
+ : "=a" (eax), "=d" (edx)
+ : "0" (op)
+ : "bx", "cx");
+ return edx;
+}
+
+void intr(int sig)
+{
+ exit(1);
+}
+
+int main(void) {
+ if ((cpuid_edx(1) & 0x4000000) == 0)
+ exit(1);
+ signal(SIGILL, intr);
+ __asm__("xorps %xmm0,%xmm0\n");
+ exit(0);
+}
+EOF
+
+if test -z "$have_sse2" ; then
+ have_sse2="no"
+ if $cc -msse2 -o $TMPE $TMPC 2> /dev/null ; then
+ if $TMPE ; then
+ have_sse2="yes"
+ fi
+ fi
+fi
+
##########################################
# VNC probe
@@ -234,6 +274,29 @@ if libvncserver-config --version >& /dev
vnc=yes
else
vnc=no
+fi
+
+fi
+
+if test "$vnc" = "yes" ; then
+
+# check for eager event handling
+cat > $TMPC <<EOF
+#include "rfb/rfb.h"
+int main(void) {
+ rfbScreenInfoPtr screen;
+
+ screen->handleEventsEagerly = 1;
+}
+EOF
+
+if $cc `libvncserver-config --cflags` -o $TMPO $TMPC 2> /dev/null ; then
+ have_eager_events="yes"
+else
+ echo "!!"
+ echo "!! Slow VNC mouse, LibVNCServer doesn't support eager events"
+ echo "!!"
+ have_eager_events="no"
fi
fi
@@ -315,6 +378,7 @@ echo " --enable-fmod enable
echo " --enable-fmod enable FMOD audio output driver"
echo " --fmod-lib path to FMOD library"
echo " --fmod-inc path to FMOD includes"
+echo " --disable-sse2 disable use of SSE2 instructions"
echo ""
echo "NOTE: The object files are build at the place where configure is
launched"
exit 1
@@ -361,6 +425,7 @@ echo "VNC support $vnc"
echo "VNC support $vnc"
echo "SDL support $sdl"
echo "SDL static link $sdl_static"
+echo "SSE2 support $have_sse2"
echo "mingw32 support $mingw32"
echo "Adlib support $adlib"
echo -n "FMOD support $fmod"
@@ -392,6 +457,9 @@ echo "configdir=$configdir" >> $config_m
echo "configdir=$configdir" >> $config_mak
echo "LIBDIR=$libdir" >> $config_mak
echo "#define CONFIG_QEMU_SHAREDIR \"$datadir\"" >> $config_h
+if test "$have_sse2" = "yes" ; then
+ echo "LOCAL_CFLAGS=-msse2" >>$config_mak
+fi
#echo "MAKE=$make" >> $config_mak
#echo "CC=$cc" >> $config_mak
#if test "$have_gcc3_options" = "yes" ; then
@@ -458,6 +526,10 @@ echo "SRC_PATH=$source_path" >> $config_
echo "SRC_PATH=$source_path" >> $config_mak
echo "TARGET_DIRS=$target_list" >> $config_mak
+if test "$have_sse2" = "yes" ; then
+ echo "#define USE_SSE2 1" >>$config_h
+fi
+
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
echo "#define O_LARGEFILE 0" >> $config_h
@@ -472,6 +544,9 @@ if test "$vnc" = "yes"; then
vnc_cflags="/usr/include"
fi
echo "VNC_CFLAGS=$vnc_cflags" >> $config_mak
+ if test "$have_eager_events" = "yes" ; then
+ echo "#define VNC_EAGER_EVENTS 1" >> $config_h
+ fi
fi
if test "$sdl" = "yes"; then
diff -r 7d8efd4f1ac7 tools/ioemu/hw/vga.c
--- a/tools/ioemu/hw/vga.c Tue Mar 14 15:18:35 2006 +0100
+++ b/tools/ioemu/hw/vga.c Tue Mar 14 15:47:32 2006 -0700
@@ -1340,6 +1340,100 @@ void vga_invalidate_scanlines(VGAState *
}
}
+extern inline int cmp_vram(VGAState *s, int offset, int n)
+{
+ long *vp, *sp;
+
+ if (s->vram_shadow == NULL)
+ return 1;
+ vp = (long *)(s->vram_ptr + offset);
+ sp = (long *)(s->vram_shadow + offset);
+ while ((n -= sizeof(*vp)) >= 0)
+ if (*vp++ != *sp++) {
+ memcpy(sp - 1, vp - 1, n + sizeof(*vp));
+ return 1;
+ }
+ return 0;
+}
+
+#ifdef USE_SSE2
+#include <signal.h>
+#include <setjmp.h>
+#include <emmintrin.h>
+
+int sse2_ok = 1;
+
+static inline unsigned int cpuid_edx(unsigned int op)
+{
+ unsigned int eax, edx;
+
+ __asm__("cpuid"
+ : "=a" (eax), "=d" (edx)
+ : "0" (op)
+ : "bx", "cx");
+ return edx;
+}
+
+jmp_buf sse_jbuf;
+
+void intr(int sig)
+{
+
+ sse2_ok = 0;
+ longjmp(sse_jbuf, 1);
+ return;
+}
+
+void check_sse2()
+{
+
+ if ((cpuid_edx(1) & 0x4000000) == 0) {
+ sse2_ok = 0;
+ return;
+ }
+ signal(SIGILL, intr);
+ if (setjmp(sse_jbuf) == 0)
+ __asm__("xorps %xmm0,%xmm0\n");
+ return;
+}
+
+int vram_dirty(VGAState *s, int offset, int n)
+{
+ __m128i *sp, *vp;
+
+ if (s->vram_shadow == NULL)
+ return 1;
+ if (sse2_ok == 0)
+ return cmp_vram(s, offset, n);
+ vp = (__m128i *)(s->vram_ptr + offset);
+ sp = (__m128i *)(s->vram_shadow + offset);
+ while ((n -= sizeof(*vp)) >= 0) {
+ if (_mm_movemask_epi8(_mm_cmpeq_epi8(*sp, *vp)) != 0xffff) {
+ while (n >= 0) {
+ _mm_store_si128(sp++, _mm_load_si128(vp++));
+ n -= sizeof(*vp);
+ }
+ return 1;
+ }
+ sp++;
+ vp++;
+ }
+ return 0;
+}
+#else // USE_SSE2
+int vram_dirty(VGAState *s, int offset, int n)
+{
+
+ return cmp_vram(s, offset, n);
+}
+
+void check_sse2()
+{
+
+ return;
+}
+#endif // USE_SSE2
+
/*
* graphic modes
*/
@@ -1434,6 +1528,9 @@ static void vga_draw_graphic(VGAState *s
printf("w=%d h=%d v=%d line_offset=%d cr[0x09]=0x%02x cr[0x17]=0x%02x
linecmp=%d sr[0x01]=0x%02x\n",
width, height, v, line_offset, s->cr[9], s->cr[0x17],
s->line_compare, s->sr[0x01]);
#endif
+ for (y = 0; y < s->vram_size; y += TARGET_PAGE_SIZE)
+ if (vram_dirty(s, y, TARGET_PAGE_SIZE))
+ cpu_physical_memory_set_dirty(s->vram_offset + y);
addr1 = (s->start_addr * 4);
bwidth = width * 4;
y_start = -1;
@@ -1536,8 +1633,17 @@ static void vga_draw_blank(VGAState *s,
void vga_update_display(void)
{
+ static int loop;
VGAState *s = vga_state;
int full_update, graphic_mode;
+
+ /*
+ * Only update the display every other time. The responsiveness is
+ * acceptable and it cuts down on the overhead of the VRAM compare
+ * in `vram_dirty'
+ */
+ if (loop++ & 1)
+ return;
if (s->ds->depth == 0) {
/* nothing to do */
@@ -1569,7 +1675,6 @@ void vga_update_display(void)
full_update = 1;
}
- full_update = 1;
switch(graphic_mode) {
case GMODE_TEXT:
vga_draw_text(s, full_update);
@@ -1874,7 +1979,10 @@ void vga_common_init(VGAState *s, Displa
#else
s->vram_ptr = qemu_malloc(vga_ram_size);
#endif
-
+ check_sse2();
+ if ((s->vram_shadow = qemu_malloc(vga_ram_size+TARGET_PAGE_SIZE+1)) ==
NULL)
+ fprintf(stderr, "Cannot allocate %d bytes for VRAM shadow, mouse will
be slow\n", vga_ram_size);
+ s->vram_shadow = (uint8_t *)((long)(s->vram_shadow + TARGET_PAGE_SIZE - 1)
& ~(TARGET_PAGE_SIZE - 1));
s->vram_offset = vga_ram_offset;
s->vram_size = vga_ram_size;
s->ds = ds;
diff -r 7d8efd4f1ac7 tools/ioemu/hw/vga_int.h
--- a/tools/ioemu/hw/vga_int.h Tue Mar 14 15:18:35 2006 +0100
+++ b/tools/ioemu/hw/vga_int.h Tue Mar 14 15:47:32 2006 -0700
@@ -76,6 +76,7 @@
#define VGA_STATE_COMMON \
uint8_t *vram_ptr; \
+ uint8_t *vram_shadow; \
unsigned long vram_offset; \
unsigned int vram_size; \
uint32_t latch; \
diff -r 7d8efd4f1ac7 tools/ioemu/target-i386-dm/Makefile
--- a/tools/ioemu/target-i386-dm/Makefile Tue Mar 14 15:18:35 2006 +0100
+++ b/tools/ioemu/target-i386-dm/Makefile Tue Mar 14 15:47:32 2006 -0700
@@ -13,7 +13,7 @@ VPATH+=:$(SRC_PATH)/linux-user
VPATH+=:$(SRC_PATH)/linux-user
DEFINES+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ARCH)
endif
-CFLAGS+=-g -fno-strict-aliasing
+CFLAGS+=-g -fno-strict-aliasing $(LOCAL_CFLAGS)
LDFLAGS=-g
LIBS=
HELPER_CFLAGS=$(CFLAGS)
_______________________________________________
Xense-devel mailing list
Xense-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xense-devel
|
Home