klogd 1.4.1, log source = ksyslog started. <6>Initializing cgroup subsys cpu <5>Linux version 3.0.0-rc5-3-xen (root@zeus) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #3 SMP Mon Jul 4 18:49:42 CEST 2011 <6>Command line: root=/dev/cciss/c0d0p2 resume=/dev/cciss/c0d0p1 splash=verbose <6>xen_release_chunk: looking at area pfn 80000-e0000: 393216 pages freed <6>xen_release_chunk: looking at area pfn f0000-fec00: 60416 pages freed <6>xen_release_chunk: looking at area pfn fed00-fee00: 256 pages freed <6>xen_release_chunk: looking at area pfn fee10-ffc00: 3568 pages freed <6>released 457456 pages of unused memory <7>1-1 mapping on a0->100 <7>1-1 mapping on 7fd4e->7fd56 <7>1-1 mapping on 7fd57->100000 <6>Set 525073 page(s) to 1-1 mapping. <6>BIOS-provided physical RAM map: <6> Xen: 0000000000000000 - 000000000009f000 (usable) <6> Xen: 000000000009f400 - 0000000000100000 (reserved) <6> Xen: 0000000000100000 - 000000007fd4e000 (usable) <6> Xen: 000000007fd4e000 - 000000007fd56000 (ACPI data) <6> Xen: 000000007fd56000 - 000000007fd57000 (usable) <6> Xen: 000000007fd57000 - 0000000080000000 (reserved) <6> Xen: 00000000e0000000 - 00000000f0000000 (reserved) <6> Xen: 00000000fec00000 - 00000000fed00000 (reserved) <6> Xen: 00000000fee00000 - 00000000fee10000 (reserved) <6> Xen: 00000000ffc00000 - 0000000100000000 (reserved) <6> Xen: 0000000100000000 - 00000006efaef000 (usable) <5>Notice: NX (Execute Disable) protection missing in CPU! <6>DMI 2.4 present. <7>DMI: HP ProLiant DL585 G2 , BIOS A07 04/30/2010 <7>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) <7>e820 remove range: 00000000000a0000 - 0000000000100000 (usable) <6>No AGP bridge found <6>last_pfn = 0x6efaef max_arch_pfn = 0x400000000 <6>last_pfn = 0x7fd57 max_arch_pfn = 0x400000000 <7>initial memory mapped : 0 - 025eb000 <7>Base memory trampoline at [ffff88000009d000] 9d000 size 8192 <6>init_memory_mapping: 0000000000000000-000000007fd57000 <7> 0000000000 - 007fd57000 page 4k <7>kernel direct mapping tables up to 7fd57000 @ 7f94c000-7fd4e000 <7>xen: setting RW the range 7fd1c000 - 7fd4e000 <6>init_memory_mapping: 0000000100000000-00000006efaef000 <7> 0100000000 - 06efaef000 page 4k <7>kernel direct mapping tables up to 6efaef000 @ 5e3a43000-5e71de000 <7>xen: setting RW the range 5e69d9000 - 5e71de000 <6>RAMDISK: 01701000 - 025eb000 <4>ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) <4>ACPI: XSDT 000000007fd4ed80 00074 (v01 HP ProLiant 00000002 Ò? 0000162E) <4>ACPI: FACP 000000007fd4ee00 000F4 (v03 HP A07 00000002 Ò? 0000162E) <4>ACPI: DSDT 000000007fd4ef00 04A6D (v01 HP DSDT 00000001 INTL 20030228) <4>ACPI: FACS 000000007fd4e100 00040 <4>ACPI: SPCR 000000007fd4e140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) <4>ACPI: HPET 000000007fd4e1c0 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) <4>ACPI: SPMI 000000007fd4e200 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: ERST 000000007fd4e240 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: FFFF 000000007fd4e440 000C6 (v01 HP ProLiant 00000002 00000000) <4>ACPI: SRAT 000000007fd4e600 001A0 (v01 AMD FAM_F_10 00000002 AMD 00000001) <4>ACPI: FFFF 000000007fd4ea00 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: BERT 000000007fd4eb80 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) <4>ACPI: HEST 000000007fd4ebc0 00170 (v01 HP ProLiant 00000001 Ò? 0000162E) <6>Scanning NUMA topology in Northbridge 24 <6>Number of physical nodes 4 <6>Node 0 MemBase 0000000000000000 Limit 0000000280000000 <6>Node 1 MemBase 0000000280000000 Limit 0000000480000000 <6>Node 2 MemBase 0000000480000000 Limit 0000000580000000 <6>Node 3 MemBase 0000000580000000 Limit 0000000680000000 <6>BSP APIC ID: ffffffff <3>NUMA: nodes only cover 24572MB of your 26359MB e820 RAM. Not used. <6>No NUMA configuration found <6>Faking a node at 0000000000000000-00000006efaef000 <6>Initmem setup node 0 0000000000000000-00000006efaef000 <6> NODE_DATA [00000005e71d3000 - 00000005e71ddfff] <4>Zone PFN ranges: <4> DMA 0x00000010 -> 0x00001000 <4> DMA32 0x00001000 -> 0x00100000 <4> Normal 0x00100000 -> 0x006efaef <4>Movable zone start PFN for each node <4>early_node_map[4] active PFN ranges <4> 0: 0x00000010 -> 0x0000009f <4> 0: 0x00000100 -> 0x0007fd4e <4> 0: 0x0007fd56 -> 0x0007fd57 <4> 0: 0x00100000 -> 0x006efaef <7>On node 0 totalpages: 6748109 <7> DMA zone: 56 pages used for memmap <7> DMA zone: 2 pages reserved <7> DMA zone: 3925 pages, LIFO batch:0 <7> DMA32 zone: 14280 pages used for memmap <7> DMA32 zone: 505223 pages, LIFO batch:31 <7> Normal zone: 85103 pages used for memmap <7> Normal zone: 6139520 pages, LIFO batch:31 <6>Detected use of extended apic ids on hypertransport bus <6>Detected use of extended apic ids on hypertransport bus <6>Detected use of extended apic ids on hypertransport bus <6>Detected use of extended apic ids on hypertransport bus <6>ACPI: PM-Timer IO Port: 0x908 <6>ACPI: HPET id: 0x10228201 base: 0xfed00000 <6>SMP: Allowing 1 CPUs, 0 hotplug CPUs <7>nr_irqs_gsi: 16 <6>Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) <6>Booting paravirtualized kernel on Xen <6>Xen version: 4.1.1_02-145.1 (preserve-AD) <6>setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1 <6>PERCPU: Embedded 26 pages/cpu @ffff8805e7182000 s75008 r8192 d23296 u106496 <7>pcpu-alloc: s75008 r8192 d23296 u106496 alloc=26*4096 <7>pcpu-alloc: [0] 0 <4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6648668 <4>Policy zone: Normal <5>Kernel command line: root=/dev/cciss/c0d0p2 resume=/dev/cciss/c0d0p1 splash=verbose <6>PID hash table entries: 4096 (order: 3, 32768 bytes) <6>Placing 64MB software IO TLB between ffff8805c5a00000 - ffff8805c9a00000 <6>software IO TLB at phys 0x5c5a00000 - 0x5c9a00000 <6>Memory: 22098896k/29092796k available (3020k kernel code, 2100360k absent, 4893540k reserved, 1408k data, 876k init) <6>Hierarchical RCU implementation. <6>NR_IRQS:384 <6>Console: colour dummy device 80x25 <6>console [tty0] enabled <7>Xen: using vcpuop timer interface <6>installing Xen timer for CPU 0 <4>Detected 2612.036 MHz processor. <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.07 BogoMIPS (lpj=10448144) <6>pid_max: default: 32768 minimum: 301 <6>Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) <6>Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) <6>Mount-cache hash table entries: 256 <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys perf_event <7>tseg: 007ff00000 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 12k freed <6>ACPI: Core revision 20110413 <4>ACPI: setting ELCR to 0200 (from 0c20) <6>Performance Events: Broken PMU hardware detected, using software events only. <6>Brought up 1 CPUs <6>devtmpfs: initialized <4>Grant table initialized <6>NET: Registered protocol family 16 <7>node 0 link 1: io port [1000, 3fff] <7>node 1 link 2: io port [4000, ffff] <6>TOM: 0000000080000000 aka 2048M <7>node 0 link 1: mmio [d0000000, d9efffff] <7>node 1 link 2: mmio [d9f00000, dfefffff] <7>node 0 link 1: mmio [e0000000, e3ffffff] <7>node 1 link 2: mmio [e4000000, e7ffffff] <7>node 0 link 1: mmio [a0000, bffff] <6>TOM2: 0000000680000000 aka 26624M <7>bus: [00, 3f] on node 0 link 1 <7>bus: 00 index 0 [io 0x0000-0x3fff] <7>bus: 00 index 1 [mem 0x80000000-0xd9efffff] <7>bus: 00 index 2 [mem 0xdff00000-0xe3ffffff] <7>bus: 00 index 3 [mem 0x000a0000-0x000bffff] <7>bus: 00 index 4 [mem 0xe8000000-0xffffffff] <7>bus: 00 index 5 [mem 0x680000000-0xfcffffffff] <7>bus: [40, 7f] on node 1 link 2 <7>bus: 40 index 0 [io 0x4000-0xffff] <7>bus: 40 index 1 [mem 0xd9f00000-0xdfefffff] <7>bus: 40 index 2 [mem 0xe4000000-0xe7ffffff] <6>ACPI: bus type pci registered <6>PCI: Using configuration type 1 for base access <6>PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort. <6>bio: create slab at 0 <7>ACPI: EC: Look up EC in DSDT <4>ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110413/dsopcode-236) <4>ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8805e045e8d0), AE_AML_BUFFER_LIMIT (20110413/psparse-536) <4>ACPI: SSDT 000000007fd58000 009BC (v02 HP PNOWSSDT 00000002 HP 00000001) <4>ACPI: Dynamic OEM Table Load: <4>ACPI: SSDT (null) 009BC (v02 HP PNOWSSDT 00000002 HP 00000001) <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S5) <6>ACPI: Using PIC for interrupt routing <6>HEST: Table parsing has been initialized. <6>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) <6>pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] <6>pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] <6>pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] <6>pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] <6>pci_root PNP0A03:00: host bridge window [io 0x1000-0x3fff] <6>pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xd9efffff] <6>pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xe3ffffff] <6>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] <7>pci 0000:00:00.0: [10de:005e] type 0 class 0x000580 <7>pci 0000:00:01.0: [10de:0051] type 0 class 0x000601 <7>pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03 <7>pci 0000:00:02.0: reg 10: [mem 0xd9ae0000-0xd9ae0fff] <7>pci 0000:00:02.0: supports D1 D2 <7>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:02.0: PME# disabled <7>pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03 <7>pci 0000:00:02.1: reg 10: [mem 0xd9ad0000-0xd9ad00ff] <7>pci 0000:00:02.1: supports D1 D2 <7>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:02.1: PME# disabled <7>pci 0000:00:06.0: [10de:0053] type 0 class 0x000101 <7>pci 0000:00:06.0: reg 20: [io 0x0500-0x050f] <7>pci 0000:00:09.0: [10de:005c] type 1 class 0x000604 <7>pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604 <7>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:0c.0: PME# disabled <7>pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604 <7>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:0d.0: PME# disabled <7>pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604 <7>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:00:0e.0: PME# disabled <7>pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 <7>pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 <7>pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 <7>pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 <7>pci 0000:00:19.0: [1022:1100] type 0 class 0x000600 <7>pci 0000:00:19.1: [1022:1101] type 0 class 0x000600 <7>pci 0000:00:19.2: [1022:1102] type 0 class 0x000600 <7>pci 0000:00:19.3: [1022:1103] type 0 class 0x000600 <7>pci 0000:00:1a.0: [1022:1100] type 0 class 0x000600 <7>pci 0000:00:1a.1: [1022:1101] type 0 class 0x000600 <7>pci 0000:00:1a.2: [1022:1102] type 0 class 0x000600 <7>pci 0000:00:1a.3: [1022:1103] type 0 class 0x000600 <7>pci 0000:00:1b.0: [1022:1100] type 0 class 0x000600 <7>pci 0000:00:1b.1: [1022:1101] type 0 class 0x000600 <7>pci 0000:00:1b.2: [1022:1102] type 0 class 0x000600 <7>pci 0000:00:1b.3: [1022:1103] type 0 class 0x000600 <7>pci 0000:01:03.0: [1002:515e] type 0 class 0x000300 <7>pci 0000:01:03.0: reg 10: [mem 0xd0000000-0xd7ffffff pref] <7>pci 0000:01:03.0: reg 14: [io 0x1000-0x10ff] <7>pci 0000:01:03.0: reg 18: [mem 0xd9cf0000-0xd9cfffff] <7>pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] <7>pci 0000:01:03.0: supports D1 D2 <7>pci 0000:01:04.0: [0e11:b203] type 0 class 0x000880 <7>pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff] <7>pci 0000:01:04.0: reg 14: [mem 0xd9ce0000-0xd9ce01ff] <7>pci 0000:01:04.0: PME# supported from D0 D3hot D3cold <7>pci 0000:01:04.0: PME# disabled <7>pci 0000:01:04.2: [0e11:b204] type 0 class 0x000880 <7>pci 0000:01:04.2: reg 10: [io 0x1400-0x14ff] <7>pci 0000:01:04.2: reg 14: [mem 0xd9cd0000-0xd9cd07ff] <7>pci 0000:01:04.2: reg 18: [mem 0xd9cc0000-0xd9cc3fff] <7>pci 0000:01:04.2: reg 1c: [mem 0xd9c00000-0xd9c7ffff] <7>pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] <7>pci 0000:01:04.2: PME# supported from D0 D3hot D3cold <7>pci 0000:01:04.2: PME# disabled <7>pci 0000:01:04.4: [103c:3300] type 0 class 0x000c03 <7>pci 0000:01:04.4: reg 20: [io 0x1800-0x181f] <7>pci 0000:01:04.4: PME# supported from D0 D3hot D3cold <7>pci 0000:01:04.4: PME# disabled <7>pci 0000:01:04.6: [103c:3302] type 0 class 0x000c07 <7>pci 0000:01:04.6: reg 10: [mem 0xd9bf0000-0xd9bf00ff] <7>pci 0000:01:04.6: PME# supported from D0 D3hot D3cold <7>pci 0000:01:04.6: PME# disabled <6>pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) <7>pci 0000:00:09.0: bridge window [io 0x1000-0x2fff] <7>pci 0000:00:09.0: bridge window [mem 0xd9b00000-0xd9cfffff] <7>pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd7ffffff pref] <7>pci 0000:00:09.0: bridge window [io 0x0000-0x03af] (subtractive decode) <7>pci 0000:00:09.0: bridge window [io 0x03b0-0x03bb] (subtractive decode) <7>pci 0000:00:09.0: bridge window [io 0x03c0-0x03df] (subtractive decode) <7>pci 0000:00:09.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) <7>pci 0000:00:09.0: bridge window [io 0x1000-0x3fff] (subtractive decode) <7>pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd9efffff] (subtractive decode) <7>pci 0000:00:09.0: bridge window [mem 0xe0000000-0xe3ffffff] (subtractive decode) <7>pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) <7>pci 0000:08:00.0: [103c:3230] type 0 class 0x000104 <7>pci 0000:08:00.0: reg 10: [mem 0xd9e00000-0xd9efffff 64bit] <7>pci 0000:08:00.0: reg 18: [io 0x3000-0x30ff] <7>pci 0000:08:00.0: reg 1c: [mem 0xd9df0000-0xd9df0fff 64bit] <7>pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] <7>pci 0000:08:00.0: supports D1 <6>pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' <6>pci 0000:00:0c.0: PCI bridge to [bus 08-0a] <7>pci 0000:00:0c.0: bridge window [io 0x3000-0x3fff] <7>pci 0000:00:0c.0: bridge window [mem 0xd9d00000-0xd9efffff] <7>pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <6>pci 0000:00:0d.0: PCI bridge to [bus 05-07] <7>pci 0000:00:0d.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) <7>pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) <7>pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <6>pci 0000:00:0e.0: PCI bridge to [bus 02-04] <7>pci 0000:00:0e.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) <7>pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) <7>pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT] <6> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) <6>ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7f]) <6>pci_root PNP0A03:01: host bridge window [io 0x4000-0xffff] <6>pci_root PNP0A03:01: host bridge window [mem 0xd9f00000-0xdfefffff] <6>pci_root PNP0A03:01: host bridge window [mem 0xe4000000-0xe7ffffff] <7>pci 0000:40:00.0: [10de:005e] type 0 class 0x000580 <7>pci 0000:40:01.0: [10de:00d3] type 0 class 0x000580 <7>pci 0000:40:0b.0: [10de:005d] type 1 class 0x000604 <7>pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:40:0b.0: PME# disabled <7>pci 0000:40:0c.0: [10de:005d] type 1 class 0x000604 <7>pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:40:0c.0: PME# disabled <7>pci 0000:40:0d.0: [10de:005d] type 1 class 0x000604 <7>pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:40:0d.0: PME# disabled <7>pci 0000:40:0e.0: [10de:005d] type 1 class 0x000604 <7>pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold <7>pci 0000:40:0e.0: PME# disabled <7>pci 0000:40:10.0: [1022:7458] type 1 class 0x000604 <6>pci 0000:40:10.0: Enabling HT MSI Mapping <7>pci 0000:40:10.1: [1022:7459] type 0 class 0x000800 <7>pci 0000:40:11.0: [1022:7458] type 1 class 0x000604 <6>pci 0000:40:11.0: Enabling HT MSI Mapping <7>pci 0000:40:11.1: [1022:7459] type 0 class 0x000800 <6>pci 0000:40:0b.0: PCI bridge to [bus 4f-51] <7>pci 0000:40:0b.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) <7>pci 0000:40:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) <7>pci 0000:40:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>pci 0000:4c:00.0: [8086:105e] type 0 class 0x000200 <7>pci 0000:4c:00.0: reg 10: [mem 0xdfee0000-0xdfefffff] <7>pci 0000:4c:00.0: reg 14: [mem 0xdfec0000-0xdfedffff] <7>pci 0000:4c:00.0: reg 18: [io 0x5000-0x501f] <7>pci 0000:4c:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] <7>pci 0000:4c:00.0: PME# supported from D0 D3hot <7>pci 0000:4c:00.0: PME# disabled <7>pci 0000:4c:00.1: [8086:105e] type 0 class 0x000200 <7>pci 0000:4c:00.1: reg 10: [mem 0xdfea0000-0xdfebffff] <7>pci 0000:4c:00.1: reg 14: [mem 0xdfe80000-0xdfe9ffff] <7>pci 0000:4c:00.1: reg 18: [io 0x5020-0x503f] <7>pci 0000:4c:00.1: reg 30: [mem 0x00000000-0x0001ffff pref] <7>pci 0000:4c:00.1: PME# supported from D0 D3hot <7>pci 0000:4c:00.1: PME# disabled <6>pci 0000:4c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' <6>pci 0000:40:0c.0: PCI bridge to [bus 4c-4e] <7>pci 0000:40:0c.0: bridge window [io 0x5000-0x5fff] <7>pci 0000:40:0c.0: bridge window [mem 0xdfe00000-0xdfefffff] <7>pci 0000:40:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>pci 0000:49:00.0: [10b5:8114] type 1 class 0x000604 <7>pci 0000:49:00.0: reg 10: [mem 0xdfcf0000-0xdfcf1fff] <7>pci 0000:49:00.0: PME# supported from D0 D3hot <7>pci 0000:49:00.0: PME# disabled <6>pci 0000:49:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' <6>pci 0000:40:0d.0: PCI bridge to [bus 49-4b] <7>pci 0000:40:0d.0: bridge window [io 0x4000-0x4fff] <7>pci 0000:40:0d.0: bridge window [mem 0xdfc00000-0xdfdfffff] <7>pci 0000:40:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>pci 0000:4a:08.0: [1000:0030] type 0 class 0x000100 <7>pci 0000:4a:08.0: reg 10: [io 0x4000-0x40ff] <7>pci 0000:4a:08.0: reg 14: [mem 0xdfde0000-0xdfdfffff 64bit] <7>pci 0000:4a:08.0: reg 1c: [mem 0xdfdc0000-0xdfddffff 64bit] <7>pci 0000:4a:08.0: reg 30: [mem 0x00000000-0x000fffff pref] <7>pci 0000:4a:08.0: supports D1 D2 <6>pci 0000:49:00.0: PCI bridge to [bus 4a-4a] <7>pci 0000:49:00.0: bridge window [io 0x4000-0x4fff] <7>pci 0000:49:00.0: bridge window [mem 0xdfd00000-0xdfdfffff] <7>pci 0000:49:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <6>pci 0000:40:0e.0: PCI bridge to [bus 46-48] <7>pci 0000:40:0e.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) <7>pci 0000:40:0e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) <7>pci 0000:40:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>pci 0000:41:01.0: [14e4:164a] type 0 class 0x000200 <7>pci 0000:41:01.0: reg 10: [mem 0xdc000000-0xddffffff 64bit] <7>pci 0000:41:01.0: reg 30: [mem 0x00000000-0x000007ff pref] <7>pci 0000:41:01.0: PME# supported from D3hot D3cold <7>pci 0000:41:01.0: PME# disabled <7>pci 0000:41:02.0: [14e4:164a] type 0 class 0x000200 <7>pci 0000:41:02.0: reg 10: [mem 0xda000000-0xdbffffff 64bit] <7>pci 0000:41:02.0: reg 30: [mem 0x00000000-0x000007ff pref] <7>pci 0000:41:02.0: PME# supported from D3hot D3cold <7>pci 0000:41:02.0: PME# disabled <6>pci 0000:40:10.0: PCI bridge to [bus 41-41] <7>pci 0000:40:10.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) <7>pci 0000:40:10.0: bridge window [mem 0xda000000-0xddffffff] <7>pci 0000:40:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <6>pci 0000:40:11.0: PCI bridge to [bus 42-45] <7>pci 0000:40:11.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled) <7>pci 0000:40:11.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) <7>pci 0000:40:11.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT] <6> pci0000:40: Unable to request _OSC control (_OSC support mask: 0x1e) <6>ACPI: PCI Interrupt Link [LNKW] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKX] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKY] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKZ] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNU0] (IRQs *5 7 10 11) <6>ACPI: PCI Interrupt Link [LNU2] (IRQs 5 7 *10 11) <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. <6>xen/balloon: Initialising balloon driver. <6>last_pfn = 0x6efaef max_arch_pfn = 0x400000000 <6>xen-balloon: Initialising balloon driver. <6>vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none <6>vgaarb: loaded <6>vgaarb: bridge control possible 0000:01:03.0 <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <6>PCI: Using ACPI for IRQ routing <7>PCI: pci_cache_line_size set to 64 bytes <7>reserve RAM buffer: 000000000009f000 - 000000000009ffff <7>reserve RAM buffer: 000000007fd4e000 - 000000007fffffff <7>reserve RAM buffer: 000000007fd57000 - 000000007fffffff <7>reserve RAM buffer: 00000006efaef000 - 00000006efffffff <6>Switching to clocksource xen <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <7>pnp 00:00: [bus 00-3f] <7>pnp 00:00: [io 0x0000-0x03af window] <7>pnp 00:00: [io 0x03b0-0x03bb window] <7>pnp 00:00: [io 0x03c0-0x03df window] <7>pnp 00:00: [io 0x03e0-0x0cf7 window] <7>pnp 00:00: [io 0x1000-0x3fff window] <7>pnp 00:00: [io 0x0000 window] <7>pnp 00:00: [io 0x0000 window] <7>pnp 00:00: [io 0x0000 window] <7>pnp 00:00: [mem 0xd0000000-0xd9efffff window] <7>pnp 00:00: [mem 0x00000000 window] <7>pnp 00:00: [mem 0xe0000000-0xe3ffffff window] <7>pnp 00:00: [mem 0x00000000 window] <7>pnp 00:00: [mem 0x00000000 window] <7>pnp 00:00: [mem 0x00000000 window] <7>pnp 00:00: [mem 0x00000000 window] <7>pnp 00:00: [mem 0x000a0000-0x000bffff window] <7>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 PNP0a08 (active) <7>pnp 00:01: [io 0x0070-0x0079] <7>pnp 00:01: [io 0x0408-0x040f] <7>pnp 00:01: [io 0x04d0-0x04d1] <7>pnp 00:01: [io 0x0020-0x003f] <7>pnp 00:01: [io 0x00a0-0x00bf] <7>pnp 00:01: [io 0x0090-0x009f] <7>pnp 00:01: [io 0x0050-0x0053] <7>pnp 00:01: [io 0x0700-0x073f] <7>pnp 00:01: [io 0x0800-0x08fe] <7>pnp 00:01: [io 0x0900-0x09fe] <7>pnp 00:01: [io 0x09ff] <7>pnp 00:01: [io 0x0a00-0x0afe] <7>pnp 00:01: [io 0x0aff] <7>pnp 00:01: [io 0x0b00-0x0bfe] <7>pnp 00:01: [io 0x0bff] <7>pnp 00:01: [io 0x0010-0x001f] <7>pnp 00:01: [io 0x0c80-0x0c83] <7>pnp 00:01: [io 0x0cd4-0x0cd7] <7>pnp 00:01: [io 0x0cf9] <7>pnp 00:01: [io 0x0f50-0x0f58] <7>pnp 00:01: [io 0x00f0] <7>pnp 00:01: [io 0x0ca0-0x0ca1] <7>pnp 00:01: [io 0x0ca4-0x0ca5] <7>pnp 00:01: [io 0x0c00-0x0c03] <7>pnp 00:01: [io 0x02f8-0x02ff] <6>system 00:01: [io 0x0408-0x040f] has been reserved <6>system 00:01: [io 0x04d0-0x04d1] has been reserved <6>system 00:01: [io 0x0700-0x073f] has been reserved <6>system 00:01: [io 0x0800-0x08fe] has been reserved <6>system 00:01: [io 0x0900-0x09fe] has been reserved <6>system 00:01: [io 0x09ff] has been reserved <6>system 00:01: [io 0x0a00-0x0afe] has been reserved <6>system 00:01: [io 0x0aff] has been reserved <6>system 00:01: [io 0x0b00-0x0bfe] has been reserved <6>system 00:01: [io 0x0bff] has been reserved <6>system 00:01: [io 0x0c80-0x0c83] has been reserved <6>system 00:01: [io 0x0cd4-0x0cd7] has been reserved <6>system 00:01: [io 0x0cf9] could not be reserved <6>system 00:01: [io 0x0f50-0x0f58] has been reserved <6>system 00:01: [io 0x0ca0-0x0ca1] has been reserved <6>system 00:01: [io 0x0ca4-0x0ca5] has been reserved <6>system 00:01: [io 0x0c00-0x0c03] has been reserved <6>system 00:01: [io 0x02f8-0x02ff] has been reserved <7>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) <7>pnp 00:02: [io 0x0ca2-0x0ca3] <7>pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) <7>pnp 00:03: [mem 0xfed00000-0xfed003ff] <7>pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) <7>pnp 00:04: [dma 7] <7>pnp 00:04: [io 0x0000-0x000f] <7>pnp 00:04: [io 0x0080-0x008f] <7>pnp 00:04: [io 0x00c0-0x00df] <7>pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) <7>pnp 00:05: [io 0x0061] <7>pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) <7>pnp 00:06: [io 0x0060] <7>pnp 00:06: [io 0x0064] <7>xen: registering gsi 1 triggering 1 polarity 0 <6>xen_map_pirq_gsi: returning irq 1 for gsi 1 <7>xen: --> pirq=1 -> irq=1 <3>Failed to setup GSI :1, err_code:-22 <7>pnp 00:06: [irq 1] <7>pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) <7>xen: registering gsi 12 triggering 1 polarity 0 <6>xen_map_pirq_gsi: returning irq 12 for gsi 12 <7>xen: --> pirq=12 -> irq=12 <3>Failed to setup GSI :12, err_code:-22 <7>pnp 00:07: [irq 12] <7>pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) <7>pnp 00:08: [io 0x002e-0x002f] <7>pnp 00:08: [io 0x004e-0x004f] <7>pnp 00:08: [io 0x0620-0x065f] <7>pnp 00:08: [io 0x0680-0x069f] <7>pnp 00:08: [io 0x0600-0x061f] <7>pnp 00:08: [io 0x0660-0x067f] <7>pnp 00:08: [io 0x0300-0x030f] <7>pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) <7>xen: registering gsi 4 triggering 1 polarity 0 <6>xen_map_pirq_gsi: returning irq 4 for gsi 4 <7>xen: --> pirq=4 -> irq=4 <3>Failed to setup GSI :4, err_code:-22 <7>pnp 00:09: [irq 4] <7>pnp 00:09: [io 0x03f8-0x03ff] <7>pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) <7>pnp 00:0a: [io 0x0070-0x0071] <7>pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active) <7>pnp 00:0b: [mem 0xfec00000-0xfec00fff] <7>pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active) <7>pnp 00:0c: [bus 40-7f] <7>pnp 00:0c: [io 0x0000 window] <7>pnp 00:0c: [io 0x0000 window] <7>pnp 00:0c: [io 0x0000 window] <7>pnp 00:0c: [io 0x4000-0xffff window] <7>pnp 00:0c: [io 0x0000 window] <7>pnp 00:0c: [io 0x0000 window] <7>pnp 00:0c: [mem 0x00000000 window] <7>pnp 00:0c: [mem 0xd9f00000-0xdfefffff window] <7>pnp 00:0c: [mem 0x00000000 window] <7>pnp 00:0c: [mem 0xe4000000-0xe7ffffff window] <7>pnp 00:0c: [mem 0x00000000 window] <7>pnp 00:0c: [mem 0x00000000 window] <7>pnp 00:0c: [mem 0x00000000 window] <7>pnp 00:0c: [mem 0x00000000 window] <7>pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 PNP0a08 (active) <7>pnp 00:0d: [mem 0xfec01000-0xfec01fff] <7>pnp 00:0d: Plug and Play ACPI device, IDs PNP0003 (active) <7>pnp 00:0e: [mem 0xfec02000-0xfec02fff] <7>pnp 00:0e: Plug and Play ACPI device, IDs PNP0003 (active) <7>pnp 00:0f: [mem 0xfec03000-0xfec03fff] <7>pnp 00:0f: Plug and Play ACPI device, IDs PNP0003 (active) <6>pnp: PnP ACPI: found 16 devices <6>ACPI: ACPI bus type pnp unregistered <6>PM-Timer failed consistency check (0x0xffffff) - aborting. <7>PCI: max bus depth: 2 pci_try_num: 3 <6>pci 0000:00:0c.0: BAR 15: assigned [mem 0xd8000000-0xd80fffff pref] <6>pci 0000:01:03.0: BAR 6: assigned [mem 0xd9b00000-0xd9b1ffff pref] <6>pci 0000:01:04.2: BAR 6: assigned [mem 0xd9b20000-0xd9b2ffff pref] <6>pci 0000:00:09.0: PCI bridge to [bus 01-01] <6>pci 0000:00:09.0: bridge window [io 0x1000-0x2fff] <6>pci 0000:00:09.0: bridge window [mem 0xd9b00000-0xd9cfffff] <6>pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd7ffffff pref] <6>pci 0000:08:00.0: BAR 6: assigned [mem 0xd8000000-0xd803ffff pref] <6>pci 0000:00:0c.0: PCI bridge to [bus 08-0a] <6>pci 0000:00:0c.0: bridge window [io 0x3000-0x3fff] <6>pci 0000:00:0c.0: bridge window [mem 0xd9d00000-0xd9efffff] <6>pci 0000:00:0c.0: bridge window [mem 0xd8000000-0xd80fffff pref] <6>pci 0000:00:0d.0: PCI bridge to [bus 05-07] <6>pci 0000:00:0d.0: bridge window [io disabled] <6>pci 0000:00:0d.0: bridge window [mem disabled] <6>pci 0000:00:0d.0: bridge window [mem pref disabled] <6>pci 0000:00:0e.0: PCI bridge to [bus 02-04] <6>pci 0000:00:0e.0: bridge window [io disabled] <6>pci 0000:00:0e.0: bridge window [mem disabled] <6>pci 0000:00:0e.0: bridge window [mem pref disabled] <6>pci 0000:40:0c.0: BAR 15: assigned [mem 0xd9f00000-0xd9ffffff pref] <6>pci 0000:40:0d.0: BAR 15: assigned [mem 0xde000000-0xde0fffff pref] <6>pci 0000:40:10.0: BAR 15: assigned [mem 0xde100000-0xde1fffff pref] <6>pci 0000:40:0b.0: PCI bridge to [bus 4f-51] <6>pci 0000:40:0b.0: bridge window [io disabled] <6>pci 0000:40:0b.0: bridge window [mem disabled] <6>pci 0000:40:0b.0: bridge window [mem pref disabled] <6>pci 0000:4c:00.0: BAR 6: assigned [mem 0xd9f00000-0xd9f1ffff pref] <6>pci 0000:4c:00.1: BAR 6: assigned [mem 0xd9f20000-0xd9f3ffff pref] <6>pci 0000:40:0c.0: PCI bridge to [bus 4c-4e] <6>pci 0000:40:0c.0: bridge window [io 0x5000-0x5fff] <6>pci 0000:40:0c.0: bridge window [mem 0xdfe00000-0xdfefffff] <6>pci 0000:40:0c.0: bridge window [mem 0xd9f00000-0xd9ffffff pref] <6>pci 0000:49:00.0: BAR 15: assigned [mem 0xde000000-0xde0fffff pref] <6>pci 0000:4a:08.0: BAR 6: assigned [mem 0xde000000-0xde0fffff pref] <6>pci 0000:49:00.0: PCI bridge to [bus 4a-4a] <6>pci 0000:49:00.0: bridge window [io 0x4000-0x4fff] <6>pci 0000:49:00.0: bridge window [mem 0xdfd00000-0xdfdfffff] <6>pci 0000:49:00.0: bridge window [mem 0xde000000-0xde0fffff pref] <6>pci 0000:40:0d.0: PCI bridge to [bus 49-4b] <6>pci 0000:40:0d.0: bridge window [io 0x4000-0x4fff] <6>pci 0000:40:0d.0: bridge window [mem 0xdfc00000-0xdfdfffff] <6>pci 0000:40:0d.0: bridge window [mem 0xde000000-0xde0fffff pref] <6>pci 0000:40:0e.0: PCI bridge to [bus 46-48] <6>pci 0000:40:0e.0: bridge window [io disabled] <6>pci 0000:40:0e.0: bridge window [mem disabled] <6>pci 0000:40:0e.0: bridge window [mem pref disabled] <6>pci 0000:41:01.0: BAR 6: assigned [mem 0xde100000-0xde1007ff pref] <6>pci 0000:41:02.0: BAR 6: assigned [mem 0xde100800-0xde100fff pref] <6>pci 0000:40:10.0: PCI bridge to [bus 41-41] <6>pci 0000:40:10.0: bridge window [io disabled] <6>pci 0000:40:10.0: bridge window [mem 0xda000000-0xddffffff] <6>pci 0000:40:10.0: bridge window [mem 0xde100000-0xde1fffff pref] <6>pci 0000:40:11.0: PCI bridge to [bus 42-45] <6>pci 0000:40:11.0: bridge window [io disabled] <6>pci 0000:40:11.0: bridge window [mem disabled] <6>pci 0000:40:11.0: bridge window [mem pref disabled] <7>pci 0000:00:09.0: setting latency timer to 64 <7>pci 0000:00:0c.0: setting latency timer to 64 <7>pci 0000:00:0d.0: setting latency timer to 64 <7>pci 0000:00:0e.0: setting latency timer to 64 <7>pci 0000:40:0b.0: setting latency timer to 64 <7>pci 0000:40:0c.0: setting latency timer to 64 <7>pci 0000:40:0d.0: setting latency timer to 64 <4>ACPI: PCI Interrupt Link [LNKZ] enabled at IRQ 11 <7>xen: registering gsi 11 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 11 for gsi 11 <7>xen: --> pirq=11 -> irq=11 <3>Failed to setup GSI :11, err_code:-22 <6>pci 0000:49:00.0: PCI INT A -> Link[LNKZ] -> GSI 11 (level, low) -> IRQ 11 <7>pci 0000:49:00.0: setting latency timer to 64 <7>pci 0000:40:0e.0: setting latency timer to 64 <7>pci_bus 0000:00: resource 4 [io 0x0000-0x03af] <7>pci_bus 0000:00: resource 5 [io 0x03b0-0x03bb] <7>pci_bus 0000:00: resource 6 [io 0x03c0-0x03df] <7>pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7] <7>pci_bus 0000:00: resource 8 [io 0x1000-0x3fff] <7>pci_bus 0000:00: resource 9 [mem 0xd0000000-0xd9efffff] <7>pci_bus 0000:00: resource 10 [mem 0xe0000000-0xe3ffffff] <7>pci_bus 0000:00: resource 11 [mem 0x000a0000-0x000bffff] <7>pci_bus 0000:01: resource 0 [io 0x1000-0x2fff] <7>pci_bus 0000:01: resource 1 [mem 0xd9b00000-0xd9cfffff] <7>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref] <7>pci_bus 0000:01: resource 4 [io 0x0000-0x03af] <7>pci_bus 0000:01: resource 5 [io 0x03b0-0x03bb] <7>pci_bus 0000:01: resource 6 [io 0x03c0-0x03df] <7>pci_bus 0000:01: resource 7 [io 0x03e0-0x0cf7] <7>pci_bus 0000:01: resource 8 [io 0x1000-0x3fff] <7>pci_bus 0000:01: resource 9 [mem 0xd0000000-0xd9efffff] <7>pci_bus 0000:01: resource 10 [mem 0xe0000000-0xe3ffffff] <7>pci_bus 0000:01: resource 11 [mem 0x000a0000-0x000bffff] <7>pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] <7>pci_bus 0000:08: resource 1 [mem 0xd9d00000-0xd9efffff] <7>pci_bus 0000:08: resource 2 [mem 0xd8000000-0xd80fffff pref] <7>pci_bus 0000:40: resource 4 [io 0x4000-0xffff] <7>pci_bus 0000:40: resource 5 [mem 0xd9f00000-0xdfefffff] <7>pci_bus 0000:40: resource 6 [mem 0xe4000000-0xe7ffffff] <7>pci_bus 0000:4c: resource 0 [io 0x5000-0x5fff] <7>pci_bus 0000:4c: resource 1 [mem 0xdfe00000-0xdfefffff] <7>pci_bus 0000:4c: resource 2 [mem 0xd9f00000-0xd9ffffff pref] <7>pci_bus 0000:49: resource 0 [io 0x4000-0x4fff] <7>pci_bus 0000:49: resource 1 [mem 0xdfc00000-0xdfdfffff] <7>pci_bus 0000:49: resource 2 [mem 0xde000000-0xde0fffff pref] <7>pci_bus 0000:4a: resource 0 [io 0x4000-0x4fff] <7>pci_bus 0000:4a: resource 1 [mem 0xdfd00000-0xdfdfffff] <7>pci_bus 0000:4a: resource 2 [mem 0xde000000-0xde0fffff pref] <7>pci_bus 0000:41: resource 1 [mem 0xda000000-0xddffffff] <7>pci_bus 0000:41: resource 2 [mem 0xde100000-0xde1fffff pref] <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) <6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 524288 bind 65536) <6>TCP reno registered <6>UDP hash table entries: 16384 (order: 7, 524288 bytes) <6>UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) <6>NET: Registered protocol family 1 <6>pci 0000:00:0c.0: Found enabled HT MSI Mapping <6>pci 0000:00:0d.0: Found enabled HT MSI Mapping <6>pci 0000:00:0e.0: Found enabled HT MSI Mapping <7>pci 0000:01:03.0: Boot video device <4>pci 0000:01:04.4: HCRESET not completed yet! <6>pci 0000:40:0b.0: Found enabled HT MSI Mapping <6>pci 0000:40:0c.0: Found enabled HT MSI Mapping <6>pci 0000:40:0d.0: Found enabled HT MSI Mapping <6>pci 0000:40:0e.0: Found enabled HT MSI Mapping <7>PCI: CLS 64 bytes, default 64 <6>Unpacking initramfs... <6>Freeing initrd memory: 15272k freed <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1309799047.831:1): initialized <6>msgmni has been set to 32768 <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) <6>io scheduler noop registered <6>io scheduler deadline registered (default) <3>APEI: Can not request iomem region <00000000000e8024-00000000000e8038> for GARs. <6>Non-volatile memory driver v1.3 <6>i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mousedev: PS/2 mouse device common for all mice <6>rtc_cmos 00:0a: RTC can wake from S4 <6>rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 <6>rtc0: alarms up to one year, y3k, 114 bytes nvram <6>cpuidle: using governor ladder <6>TCP cubic registered <6>rtc_cmos 00:0a: setting system clock to 2011-07-04 17:04:07 UTC (1309799047) <6>Freeing unused kernel memory: 876k freed <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>HP CISS Driver (v 3.6.26) <4>ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 10 <7>xen: registering gsi 10 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 10 for gsi 10 <7>xen: --> pirq=10 -> irq=10 <3>Failed to setup GSI :10, err_code:-22 <6>cciss 0000:08:00.0: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10 <6>cciss 0000:08:00.0: cciss0: <0x3230> at PCI 0000:08:00.0 IRQ 23 using DAC <6> cciss/c0d0: p1 p2 p3 <7>pata_amd 0000:00:06.0: version 0.4.1 <7>pata_amd 0000:00:06.0: setting latency timer to 64 <6>scsi0 : pata_amd <6>scsi1 : pata_amd <6>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 <6>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 <6>ata1.00: ATAPI: DV-28E-V, C.AB, max UDMA/33 <7>ata1: nv_mode_filter: 0x739f&0x73ff->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x0 <6>ata1.00: configured for UDMA/33 <5>scsi 0:0:0:0: CD-ROM TEAC DV-28E-V C.AB PQ: 0 ANSI: 5 <7>ata2: port disabled. ignoring. <6>Fusion MPT base driver 3.04.19 <6>Copyright (c) 1999-2008 LSI Corporation <6>Fusion MPT SPI Host driver 3.04.19 <7>xen: registering gsi 11 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 11 for gsi 11 <7>xen: --> pirq=11 -> irq=11 <3>Failed to setup GSI :11, err_code:-22 <6>mptspi 0000:4a:08.0: PCI INT A -> Link[LNKZ] -> GSI 11 (level, low) -> IRQ 11 <6>mptbase: ioc0: Initiating bringup <6>input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input1 <6>ioc0: LSI53C1020A A1: Capabilities={Initiator,Target} <6>scsi2 : ioc0: LSI53C1020A A1, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=11 <7>ACPI: acpi_idle registered with cpuidle <6>udev[71]: starting version 166 <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <4>ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 10 <7>xen: registering gsi 10 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 10 for gsi 10 <7>xen: --> pirq=10 -> irq=10 <3>Failed to setup GSI :10, err_code:-22 <6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 10 (level, low) -> IRQ 10 <7>ehci_hcd 0000:00:02.1: setting latency timer to 64 <6>ehci_hcd 0000:00:02.1: EHCI Host Controller <6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:02.1: debug port 1 <7>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported <6>ehci_hcd 0000:00:02.1: irq 10, io mem 0xd9ad0000 <6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 3.0.0-rc5-3-xen ehci_hcd <6>usb usb1: SerialNumber: 0000:00:02.1 <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 10 ports detected <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <4>ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 5 <7>xen: registering gsi 5 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 5 for gsi 5 <7>xen: --> pirq=5 -> irq=5 <3>Failed to setup GSI :5, err_code:-22 <6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 5 (level, low) -> IRQ 5 <7>ohci_hcd 0000:00:02.0: setting latency timer to 64 <6>ohci_hcd 0000:00:02.0: OHCI Host Controller <6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:02.0: irq 5, io mem 0xd9ae0000 <6>uhci_hcd: USB Universal Host Controller Interface driver <4>ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 11 <7>xen: registering gsi 11 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 11 for gsi 11 <7>xen: --> pirq=11 -> irq=11 <3>Failed to setup GSI :11, err_code:-22 <6>uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 11 (level, low) -> IRQ 11 <6>uhci_hcd 0000:01:04.4: UHCI Host Controller <6>uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports <4>uhci_hcd 0000:01:04.4: HCRESET not completed yet! <6>uhci_hcd 0000:01:04.4: irq 11, io base 0x00001800 <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 3.0.0-rc5-3-xen uhci_hcd <6>usb usb3: SerialNumber: 0000:01:04.4 <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: OHCI Host Controller <6>usb usb2: Manufacturer: Linux 3.0.0-rc5-3-xen ohci_hcd <6>usb usb2: SerialNumber: 0000:00:02.0 <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 10 ports detected <6>usb 3-1: new full speed USB device number 2 using uhci_hcd <6>EXT4-fs (cciss!c0d0p2): mounted filesystem with ordered data mode. Opts: acl,user_xattr <6>usb 3-1: New USB device found, idVendor=03f0, idProduct=1027 <6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 3-1: Product: Virtual Keyboard <6>usb 3-1: Manufacturer: HP <6>input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.0/input/input2 <6>generic-usb 0003:03F0:1027.0001: input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 <6>input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.1/input/input3 <6>generic-usb 0003:03F0:1027.0002: input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 <6>usbcore: registered new interface driver usbhid <6>usbhid: USB HID core driver <6>EXT4-fs (cciss!c0d0p2): re-mounted. Opts: acl,user_xattr <6>usb 1-6: new high speed USB device number 2 using ehci_hcd <6>usb 1-6: New USB device found, idVendor=04b4, idProduct=6560 <6>usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <6>hub 1-6:1.0: USB hub found <6>hub 1-6:1.0: 4 ports detected <6>udev[380]: starting version 166 <6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 <6>ACPI: Power Button [PWRF] <6>MCE: In-kernel MCE decoding enabled. <6>EDAC MC: Ver: 2.1.0 <4>k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 <6>AMD64 EDAC driver v3.4.0 <4>k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <4>k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141 <6>ipmi message handler version 39.2 <4>k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141 <7>xen: registering gsi 10 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 10 for gsi 10 <7>xen: --> pirq=10 -> irq=10 <3>Failed to setup GSI :10, err_code:-22 <6>hpwdt 0000:01:04.0: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10 <7>hpwdt: New timer passed in is 30 seconds. <6>hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST). <6>hpwdt 0000:01:04.0: HP Watchdog Timer Driver: 1.2.0, timer margin: 30 seconds (nowayout=0). <6>IPMI System Interface driver. <6>input: PC Speaker as /devices/platform/pcspkr/input/input5 <6>e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 <6>e1000e: Copyright(c) 1999 - 2011 Intel Corporation. <6>e1000e 0000:4c:00.0: Disabling ASPM L1 <7>xen: registering gsi 10 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 10 for gsi 10 <7>xen: --> pirq=10 -> irq=10 <3>Failed to setup GSI :10, err_code:-22 <6>e1000e 0000:4c:00.0: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10 <7>e1000e 0000:4c:00.0: setting latency timer to 64 <6>EDAC amd64: DRAM ECC enabled. <5>EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable. <5>EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. <5> Either enable ECC checking or force module loading by setting 'ecc_enable_override'. <5> (Note that use of the override may cause unknown side effects.) <6>ipmi_si 0000:01:04.6: probing via PCI <7>xen: registering gsi 10 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 10 for gsi 10 <7>xen: --> pirq=10 -> irq=10 <3>Failed to setup GSI :10, err_code:-22 <6>ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10 <6>ipmi_si 0000:01:04.6: [mem 0xd9bf0000-0xd9bf00ff] regsize 1 spacing 1 irq 10 <6>ipmi_si: Adding PCI-specified kcs state machine <6>ipmi_si: probing via ACPI <6>ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 <6>ipmi_si: Adding ACPI-specified kcs state machine <6>ipmi_si: probing via SMBIOS <6>ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 <6>ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface <6>ipmi_si: probing via SPMI <6>ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0 <6>ipmi_si: Adding SPMI-specified kcs state machine duplicate interface <6>ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9bf0000, slave address 0x0, irq 10 <6>EDAC amd64: DRAM ECC enabled. <6>EDAC amd64: K8 revF or later detected (node 1). <7>EDAC MC: DCT0 chip selects: <6>EDAC amd64: MC: 0: 4096MB 1: 4096MB <6>EDAC amd64: MC: 2: 4096MB 3: 4096MB <6>EDAC amd64: MC: 4: 0MB 5: 0MB <6>EDAC amd64: MC: 6: 0MB 7: 0MB <6>EDAC amd64: CS0: Registered DDR2 RAM <6>EDAC amd64: CS1: Registered DDR2 RAM <6>EDAC amd64: CS2: Registered DDR2 RAM <6>EDAC amd64: CS3: Registered DDR2 RAM <6>EDAC MC1: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:19.2 <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>EDAC amd64: DRAM ECC enabled. <6>EDAC amd64: K8 revF or later detected (node 2). <7>EDAC MC: DCT0 chip selects: <6>EDAC amd64: MC: 0: 4096MB 1: 4096MB <6>EDAC amd64: MC: 2: 0MB 3: 0MB <6>EDAC amd64: MC: 4: 0MB 5: 0MB <6>EDAC amd64: MC: 6: 0MB 7: 0MB <6>EDAC amd64: CS0: Registered DDR2 RAM <6>EDAC amd64: CS1: Registered DDR2 RAM <6>EDAC MC2: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:1a.2 <6>EDAC amd64: DRAM ECC enabled. <6>EDAC amd64: K8 revF or later detected (node 3). <7>EDAC MC: DCT0 chip selects: <6>EDAC amd64: MC: 0: 4096MB 1: 4096MB <6>EDAC amd64: MC: 2: 0MB 3: 0MB <6>EDAC amd64: MC: 4: 0MB 5: 0MB <6>EDAC amd64: MC: 6: 0MB 7: 0MB <6>EDAC amd64: CS0: Registered DDR2 RAM <6>EDAC amd64: CS1: Registered DDR2 RAM <6>EDAC MC3: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:1b.2 <6>bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.6 (Mar 7, 2011) <7>xen: registering gsi 10 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 10 for gsi 10 <7>xen: --> pirq=10 -> irq=10 <3>Failed to setup GSI :10, err_code:-22 <6>bnx2 0000:41:01.0: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10 <6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray <6>cdrom: Uniform CD-ROM driver Revision: 3.20 <7>sr 0:0:0:0: Attached scsi CD-ROM sr0 <5>sr 0:0:0:0: Attached scsi generic sg0 type 5 <6>e1000e 0000:4c:00.0: eth0: (PCI Express:2.5GT/s:Width x4) 00:1b:78:58:7c:a0 <6>e1000e 0000:4c:00.0: eth0: Intel(R) PRO/1000 Network Connection <6>e1000e 0000:4c:00.0: eth0: MAC: 0, PHY: 4, PBA No: D51930-003 <6>e1000e 0000:4c:00.1: Disabling ASPM L1 <7>xen: registering gsi 11 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 11 for gsi 11 <7>xen: --> pirq=11 -> irq=11 <3>Failed to setup GSI :11, err_code:-22 <6>e1000e 0000:4c:00.1: PCI INT B -> Link[LNKX] -> GSI 11 (level, low) -> IRQ 11 <7>e1000e 0000:4c:00.1: setting latency timer to 64 <6>ipmi_si 0000:01:04.6: Using irq 10 <6>ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11) <6>ipmi_si 0000:01:04.6: IPMI kcs interface initialized <6>e1000e 0000:4c:00.1: eth1: (PCI Express:2.5GT/s:Width x4) 00:1b:78:58:7c:a1 <6>e1000e 0000:4c:00.1: eth1: Intel(R) PRO/1000 Network Connection <6>e1000e 0000:4c:00.1: eth1: MAC: 0, PHY: 4, PBA No: D51930-003 <6>bnx2 0000:41:01.0: eth2: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 10, node addr 00:1a:4b:be:f8:74 <7>xen: registering gsi 11 triggering 0 polarity 1 <6>xen_map_pirq_gsi: returning irq 11 for gsi 11 <7>xen: --> pirq=11 -> irq=11 <3>Failed to setup GSI :11, err_code:-22 <6>bnx2 0000:41:02.0: PCI INT A -> Link[LNKX] -> GSI 11 (level, low) -> IRQ 11 <6>bnx2 0000:41:02.0: eth3: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 11, node addr 00:1a:4b:be:f8:76 <6>shpchp 0000:40:10.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 <3>shpchp 0000:40:10.0: Cannot reserve MMIO region <6>shpchp 0000:40:11.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0 <3>shpchp 0000:40:11.0: Cannot reserve MMIO region <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>Adding 2103292k swap on /dev/cciss/c0d0p1. Priority:-1 extents:1 across:2103292k <6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx <6>EXT4-fs (cciss!c0d0p3): mounted filesystem with ordered data mode. Opts: acl,user_xattr Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Mon Jul 4 19:04:13 2011 Waiting for device /dev/cciss/c0d0p2 to appear: ok fsck from util-linux 2.19 [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a -C0 /dev/cciss/c0d0p2 /dev/cciss/c0d0p2: clean, 169587/655360 files, 1292281/2620672 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/cciss/c0d0p2 mount -o rw,acl,user_xattr -t ext4 /dev/cciss/c0d0p2 /root Boot logging started on /dev/tty1(/dev/console) at Mon Jul 4 19:04:15 2011 service boot.open-iscsi start service boot.proc start service boot.udev start service boot.proc done service boot.open-iscsi done Starting udevd: done Loading drivers, configuring devices: done service boot.udev done service boot.loadmodules start service boot.rootfsck start Loading required kernel modules done service boot.loadmodules done Activating swap-devices in /etc/fstab... done service boot.rootfsck done service boot.clock start Set System Time to the current Hardware Clockdone service boot.clock done service boot.device-mapper start Activating device mapper...done service boot.device-mapper done service boot.localfs start Checking file systems... fsck from util-linux 2.19 /dev/cciss/c0d0p3: clean, 20/8175616 files, 3301974/32687872 blocks donedone Mounting local file systems... /dev/cciss/c0d0p3 on /srv type ext4 (rw,acl,user_xattr) done service boot.localfs done service boot.cleanup start service boot.cycle start service boot.cycle done service boot.klog start killproc: kill(352,29) Creating /var/log/boot.msg done service boot.klog done service boot.localnet start Setting up hostname 'zeus'done Setting up loopback interface done service boot.localnet done service boot.cleanup done service boot.swap start Activating remaining swap-devices in /etc/fstab... service boot.swap done done service boot.ldconfig start service boot.ldconfig done service boot.sysctl start Setting current sysctl status from /etc/sysctl.conf service boot.sysctl done done service boot.ipconfig start Disabling IP forwardingdone service boot.ipconfig done service boot.udev_retry start Finish udev device configuration: service boot.udev_retry done done System Boot Control: The system has been set up Skipped features: boot.open-iscsi boot.cycle System Boot Control: Running /etc/init.d/boot.local done INIT: Entering runlevel: 5 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Master Resource Control: Running /etc/init.d/before.local done service earlysyslog start service acpid start service dbus start start_daemon: execve (/bin/dbus-daemon) [ /bin/dbus-daemon --system ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no PREVLEVEL=N startproc: execve (/sbin/acpid) [ LINES=25 HOME=/ /sbin/acpid SHLVL=2 ], [ DO_FORCEFSCK=no splash=verbose DO_FASTBOOT=no SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/start_daemon CONSOLE=/dev/console DAEMON=/bin/dbus-daemon ROOTFS_FSTYPE=ext4 ] SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 DO_FORCEFSCK=no splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/sbin/acpid ] acpid: cannot open input layer service acpid done Starting acpid done service fbset start acpid: starting up with netlink and the input layer service fbset done service kbd start acpid: 2 rules loaded acpid: waiting for events: event logging is off startproc: execve (/sbin/rsyslogd) [ /sbin/rsyslogd -c 5 -f /etc/rsyslog.early.conf ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 SPLASHCFG= PWD=/ resume=/dev/cciss/c0d0p1 DO_QUIET=no PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ DO_FORCEFSCK=no SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/sbin/rsyslogd ] service earlysyslog done Starting syslog servicesdone Starting D-Bus daemon service dbus done done Loading console font lat9w-16.psfu -m trivial G0:loadable doneLoading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Start Unicode mode done service kbd done service network start service cpufreq start service cpufreq done Loading CPUFreq modulesdone service irq_balancer start service irq_balancer done Starting irqbalance unused service random start service random done Initializing random number generatordone service splash start service splash done Setting up (localfs) network interfaces: lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 lo done eth0 device: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) eth0 done eth1 device: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) eth1 done eth2 device: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02) eth2 done eth3 device: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02) eth3 done br0 br0 Ports: [eth0] br0 forwarddelay (see man ifcfg-bridge) not ready. Proceeding in background. br0 IP address: 10.0.0.1/24 br0 done br1 br1 Ports: [eth1] br1 forwarddelay (see man ifcfg-bridge) ... ready br1 IP address: 192.168.1.16/24 br1 done br2 br2 Ports: br2 forwarddelay (see man ifcfg-bridge) - no ports in bridge. br2 IP address: 192.168.200.254/24 br2 done service network done Setting up service (localfs) network . . . . . . . . . .done service sshd start service syslog start killproc: kill(884,15) startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 DO_FORCEFSCK=no splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] startproc: execve (/sbin/rsyslogd) [ /sbin/rsyslogd -c 5 -f /etc/rsyslog.conf ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 DO_FORCEFSCK=no splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/sbin/rsyslogd ] service syslog done Re-Starting syslog servicesdone Starting SSH daemon service sshd done done service gpm start Starting console mouse support (gpm) startproc: execve (/usr/sbin/gpm) [ /usr/sbin/gpm -m /dev/input/mice -t ps2 ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 DO_FORCEFSCK=no splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/usr/sbin/gpm ] service gpm done done service xdm start Starting service gdm service auditd start startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 DO_FORCEFSCK=no splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/sbin/auditd ] startproc: execve (/usr/sbin/gdm) [ /usr/sbin/gdm ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no LANG=en_US.UTF-8 PREVLEVEL=N LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=DMZ DO_FORCEFSCK=no WINDOWMANAGER=/usr/bin/startxfce4 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/usr/sbin/gdm ] service auditd done Starting auditd done service hp-ilo start service xdm done done service ipmi start gdm[2894]: WARNING: socket: Address family not supported by protocol service ipmi done Starting ipmi drivers: done Starting hp-ilo: service ipmiutil_asy start service ipmiutil_asy done Starting ipmiutil_asy bridge agent: service ipmiutil_evt start service ipmiutil_wdt start startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ DO_FASTBOOT=no CONSOLE=/dev/console ROOTFS_FSTYPE=ext4 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.88 DO_BLOGD=yes REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM=no RUNLEVEL=5 resume=/dev/cciss/c0d0p1 PWD=/ SPLASHCFG= DO_QUIET=no PREVLEVEL=N LINES=25 HOME=/ SHLVL=4 DO_FORCEFSCK=no splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/cciss/c0d0p2 _=/sbin/startproc DAEMON=/usr/sbin/cron ] service ipmiutil_wdt done Starting /usr/sbin/ipmiutil wdt: service network-remotefs start done service hp-ilo done checkproc: /usr/sbin/gdm 2894 service network-remotefs done Setting up (remotefs) network interfaces: Setting up service (remotefs) network . . . . . . . . . .done Starting ipmiutil_evt: service hp-health start Using Proliant Standard IPMI based System Health Monitor Starting Proliant Standard IPMI based System Health Monitor (hpasmlited): service ntp start checkproc: /usr/sbin/gdm 2894 done