WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] on starting HVM-domU whole system freezes with "soft lockup

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] on starting HVM-domU whole system freezes with "soft lockup - CPU X stuck for XXs! [qemu-dm:...]"
From: "MadLoisae@xxxxxxx" <MadLoisae@xxxxxxx>
Date: Tue, 12 Apr 2011 23:09:43 +0200
Delivery-date: Tue, 12 Apr 2011 14:14:59 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Reply-to: MadLoisae@xxxxxxx
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.1.16) Gecko/20110307 Icedove/3.0.11
Hi xen-users,

I am trying since a few days my first steps with xen.
Hardware: Core2 T7200, Intel 945GME, 2GB RAM
Software: debian squeeze, i686, with debian delivered xen 4.0.1
CPU and BIOS support hardware virtualisation: (XEN) HVM: VMX enabled

I can successfully boot with xen my dom0 with squeeze-delivered i686 kernel.
As soon as I start a HVM (paravirtualisation works without problems) my dom0 stucks immediately. I can see about 10 seconds after starting domU "nothing", then the first messages like "hrtimer: interrupt took 1739955444 ns" messages appear, then my disk gets timeouts. then kernel panics like below are starting - normally they are not written to messages-log, one time i had "luck":

kernel: : [ 4815.144473] saa7146 (0) vpeirq: used 3 times >80% of buffer (1049604 bytes now) kernel: : [ 4815.144473] Modules linked in: tun xt_physdev loop ipt_REJECT ip6table_filter ip6_tables ebtable_nat ebtables bridge stp xen_evtchn xenfs nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs xt_recent ipt_MASQUERADE xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables fuse ext4 jbd2 crc16 it87 hwmon_vid coretemp tda10021 snd_hda_codec_via budget_av snd_hda_intel snd_hda_codec saa7146_vv snd_hwdep videodev v4l1_compat snd_pcm_oss snd_mixer_oss videobuf_dma_sg videobuf_core snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq budget_core i915 drm_kms_helper dvb_core snd_timer saa7146 snd_seq_device ttpci_eeprom drm rng_core pcspkr evdev i2c_i801 i2c_algo_bit snd i2c_core soundcore video output button snd_page_alloc processor acpi_processor ext3 jbd mbcache dm_mod sd_mod crc_t10dif ata_generic uhci_hcd ata_piix fan ehci_hcd libata scsi_mod e1000e usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan]
kernel: : [ 4815.144473]
kernel: : [ 4815.324579] saa7146 (0) saa7146_i2c_writeout [irq]: timed out waiting for end of xfer
kernel: : [ 4815.324722] ata1: lost interrupt (Status 0x50)
kernel: : [ 4815.324772] sd 0:0:0:0: [sda] Unhandled error code
kernel: : [ 4815.324775] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT kernel: : [ 4815.324780] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 d3 41 9f 00 00 28 00
kernel: : [ 4815.324806] lost page write due to I/O error on sda1
kernel: : [ 4815.324817] lost page write due to I/O error on sda1
kernel: : [ 4815.324826] lost page write due to I/O error on sda1
kernel: : [ 4815.324834] lost page write due to I/O error on sda1
kernel: : [ 4815.324843] lost page write due to I/O error on sda1
kernel: : [ 4815.450483] Pid: 1337, comm: qemu-dm Not tainted (2.6.32-5-xen-686 #1) 945GM/E-ITE8712
kernel: : [ 4815.450483] EIP: 0061:[<c1002227>] EFLAGS: 00200246 CPU: 0
kernel: : [ 4815.450483] EIP is at hypercall_page+0x227/0x1001
kernel: : [ 4815.450483] EAX: 00040000 EBX: 00000000 ECX: 00000000 EDX: c357a7b4 kernel: : [ 4815.450483] ESI: 00000009 EDI: 00000028 EBP: c13959e4 ESP: ddb6defc
kernel: : [ 4815.450483]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0069
kernel: : [ 4815.450483] CR0: 8005003b CR2: 0807f9d0 CR3: 1da42000 CR4: 00002660 kernel: : [ 4815.450483] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
kernel: : [ 4815.450483] DR6: ffff0ff0 DR7: 00000400
kernel: : [ 4815.450483] Call Trace:
kernel: : [ 4815.450483]  [<c1006048>] ? xen_force_evtchn_callback+0xc/0x10
kernel: : [ 4815.450483]  [<c1006778>] ? check_events+0x8/0xc
kernel: : [ 4815.450483]  [<c1006737>] ? xen_irq_enable_direct_end+0x0/0x1
kernel: : [ 4815.450483]  [<c103c80b>] ? __do_softirq+0x4b/0x156
kernel: : [ 4815.450483]  [<c103c947>] ? do_softirq+0x31/0x3c
kernel: : [ 4815.450483]  [<c103ca21>] ? irq_exit+0x26/0x58
kernel: : [ 4815.450483]  [<c1199a16>] ? xen_evtchn_do_upcall+0x22/0x2c
kernel: : [ 4815.653736]  [<c1009b5f>] ? xen_do_upcall+0x7/0xc
kernel: : [ 4815.653736]  [<c104a74c>] ? sys_clock_gettime+0x46/0x7e
kernel: : [ 4815.653736]  [<c1008f9c>] ? syscall_call+0x7/0xb
kernel: : [ 4815.676006] saa7146 (0) vpeirq: used 1 times >80% of buffer (1300396 bytes now)

on monitor I can see frequently messages which look like:
soft lockup - CPU X stuck for XXs! [qemu-dm:...]
always i saw qemu-dm is listed with PID in this message. these messages I can never find in messages-log, i think the machine is too dead to write them down onto disc.

the only way to get the machine back is to be fast enough after starting (means less than about 10 seconds) do a xm destroy <name>. otherwise the system needs to be powercycled, rarely ctrl-alt-delete on console initiates a reboot, most time this also does not work.

can anybody tell me where I can search for the issue?
currently I tried to change architecture to amd64, but as it is not only the kernel and xen itself this is not a "fast try", so hopefully somebody can help me here.
attached: xm dmesg (from i686)
in there I've limited memory of dom0 to 1GB because I tought maybe balooning causes the issue. my HVM machines never had more than 512MB configured RAM, but nevertheless the problem also occurs with 128 or 256MB configured.

thank you for your investigations.

best regards
Alois

Attachment: xm_dmesg
Description: Text document

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>