|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] help with bridging
Hello,
There is a xen setup in which "brctl show" gives the following output.
bridge name bridge id STP enabled interfaces eth1 8000.003048c9d4df no peth1
vif1.0 vif2.0 vif3.0
No other bridge is present there.
That means the bridge is eth1, but network configuration for one of the vms looks like the following in the configuration file
Networking # vif = [ 'ip=192.168.1.158,mac=00:16:3E:19:26:71,bridge=xenbr1'
]
But there is no network interface like xenbr1 when you type ifconfig . This setup is working fine. I am not sure how this works. I am new to xen, so if anybody help me to understand this setup.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] help with bridging,
Tino <=
|
|
|
|
|