Hi,
I'm using the OpenSuse packages (on OpenSuse obviously). I get the "boot"
thing, no worries. I've managed to install it on my laptop using Xen 4.0.
Didn't work with a sparse file though, had to alocate all space before hand.
On my production hypervisors I upgraded to 4.0 as well, but for now it doesn't
work there. I suspect however that this has something to do with the
underlying storage (iSCSI) so I'm now testing with local storage.
I'm happy to hear that Al these versions are supposed to run fine.
So what version of Xen do you prefer for running M$?
thx!
B.
On Friday 29 October 2010 21:52:15 Teck Choon Giam wrote:
> May I know your Xen is installed via source or ?
>
> Actually you need to set boot = 'cd' as the boot will boot drive c
> then followed by drive d. Without the c after successfully
> installation, it will still go and boot to your drive d. It is like
> setting your BIOS boot order. Someone correct me if I am wrong. My
> configuration never change during installation of any windows guest
> OSes and after. It works fine for xen-3.3.x, xen-3.4.x and xen-4.0.x.
> I have tested such installation for windows 2008, windows 2008 R2,
> windows 7, windows XP, windows vista and RHEL6. However, my host is
> CentOS 5 though.
>
> Thanks.
>
> Kindest regards,
> Giam Teck Choon
>
> On Fri, Oct 29, 2010 at 4:45 PM, Bart Coninckx <bart.coninckx@xxxxxxxxxx>
wrote:
> > On Thursday 28 October 2010 19:40:32 Bart Coninckx wrote:
> >> Hi,
> >>
> >> trying to install Windows 2008 Small Business Server 64bit on Xen 3.4 on
> >> opensuse 11.2.
> >>
> >> The install runs fine, but after the first reboot, the VNC console
> >> shows:
> >>
> >> boot mgr is missing
> >>
> >> When I try to repair that with the install CD, I cannot see the
> >> previously installed C: partition, as if drivers are missing or
> >> something.
> >>
> >> Does any know of Windows 2008 SBS is installable at all? I've recently
> >> installed a regular Windows 2008 Server on Xen 3.2 and that was not an
> >> issue. R2 was of course.
> >>
> >> This is my config file:
> >>
> >> name="win1"
> >> uuid="c157bc27-b978-0e46-c799-3b7bc64eb0ac"
> >> memory=8192
> >> maxmem=8192
> >> vcpus=2
> >> on_poweroff="destroy"
> >> on_reboot="restart"
> >> on_crash="destroy"
> >> localtime=1
> >>
> >> builder="hvm"
> >> extid=1
> >> device_model="/usr/lib/xen/bin/qemu-dm"
> >> kernel="/usr/lib/xen/boot/hvmloader"
> >> boot="d"
> >> #disk=[ 'phy:/dev/mapper/win1c,hda,w', 'phy:/dev/mapper/win1d,hdb,w',
> >> 'file:/mnt/nfs1/DVD1_Installation.iso,hdc:cdrom,r', ]
> >> disk=[ 'phy:/dev/mapper/win1c,hda,w',
> >> 'file:/mnt/nfs1/DVD1_Installation.iso,hdc:cdrom,r', ]
> >> vif=[ 'bridge=br0,model=rtl8139', ]
> >>
> >>
> >> stdvga=0
> >> vnc=1
> >> vncunused=1
> >> apic=1
> >> acpi=1
> >> pae=1
> >>
> >> usb=1
> >> usbdevice='tablet'
> >>
> >> serial="pty"
> >>
> >>
> >> Thx!
> >>
> >> Bart
> >>
> >> _______________________________________________
> >> Xen-users mailing list
> >> Xen-users@xxxxxxxxxxxxxxxxxxx
> >> http://lists.xensource.com/xen-users
> >
> > Further investigation revealed that the installation reboots while
> > extracting files, so the installation does not get to finish entirely.
> > I'm testing now on Xen 4.0. Up till now it gets simpley stuck while
> > extracting the files, once at 16%, once at 74%. Trying to see if this
> > has to do with free disk space on my test machine. But my guess is it
> > won't work on Xen 3.4. 4.0 Remains a question.
> >
> > B.
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home