Re: [Xen-users] Xen 4.0.1 freezes with no output

[Sven Anders <anders@xxxxxxxxxx>]

Andreas Kinzler schrieb:
> Hello,
>
>> I booted the system with Xen 4.0.1 kernel using the
>> 2.6.32.18-xen0-pvops kernel. After the system runs some seconds
>> to several minutes, the system simply freezes. I got no output
>> at all and it does not react to any key I press. The keyboard
>> and display are simply dead. Neither the sysreq key combination
>> nor the 3xCtrl-A combination on the attached serial console does work.
>> This all happens without any DomU running!
>
> Looks quite similar to a problem I am chasing. Can you please list
> your hardware in detail. I assume it has something to do with the
> new Intel CPUs and HPETs (in my case).
>
> My hardware is: Supermicro X8SIL-F, Xeon X3450, Adaptec 5405, 8/16 GB
> registered ECC DDR3 RAM.

From my first posting:

Hardware details:
-----------------
Mainboard: Supermicro X8SIL-F
CPU: Intel Xeon 4-Code L3426 1,86Ghz 8MB 2.5GT/s
RAM: 1 GB ECC Registered DDR RAM (tested with memtest86+)
PCI: 1x Intel PRO/1000 PT Quad Port Server Netzwerkkarte
HD: Two SATA disks WDC WD1601ABYS-01C0A0
Misc: Remote-Management-Card (over LAN)

Quite similar...

Regards
 Sven

-- 
 Sven Anders <anders@xxxxxxxxxx>                 () UTF-8 Ribbon Campaign
                                                 /\ Support plain text e-mail
 ANDURAS intranet security AG
 Messestraße 3 - 94036 Passau - Germany
 Web: www.anduras.de - Tel: +49 (0)851-4 90 50-0 - Fax: +49 (0)851-4 90 50-55

Rechtsform: Aktiengesellschaft - Sitz: Passau - Amtsgericht: Passau HRB 6032
Mitglieder des Vorstands: Dipl.-Inf. Sven Anders, Dipl.-Inf. Marcus Junker
Vorsitzender des Aufsichtsrats: RA Mark Peters


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users