WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Xen bridge no longer working

It's always a good idea to backup any script that you edited. When you update
there is a chance the anything that you edit relate tow the package will be
overwritten. I'm glad you was able to figure out the issue. 

:) 

Flavio-11 wrote:
> 
> Hello everybody,
> 
> Here again with a Xenbr0 bridge problem
> I'm a Gentoo user, xen-sources-2.6.34 and I always used the bridge from
> eth0
> to xenbr0.
> Here's what I get at boot time:
> * Bringing up interface eth0
> *     null
> [...]
> * Starting Xen control daemon ...
> 
> And the bridge doesn't come up.
> 
> The normal behaviour should be that the Xenbr0 bridge comes up
> automatically, but it doesn't anymore.
> Here's my network configuration file (/etc/conf.d/net):
> 
> config_eth0=( "null" )
> 
> bridge_xenbr0="eth0"
> 
> brctl_xenbr0=(
>  "setfd 0"
>  "stp off"
> )
> 
> config_xenbr0=(
>    "dhcp"
> )
> 
> I don't understand why, the bridge doesn't come up.
> 
> This is the output of the ifconfig command:
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:52 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:5232 (5.1 KiB)  TX bytes:5232 (5.1 KiB)
> 
> peth0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
>           inet6 addr: fe80::260:97ff:fe20:464b/64 Scope:Link
>           UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
>           RX packets:98 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:5880 (5.7 KiB)  TX bytes:1234 (1.2 KiB)
>           Interrupt:17 Base address:0xec00
> 
> xenbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00
>           inet6 addr: fe80::260:97ff:fe20:464b/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:94 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:4314 (4.2 KiB)  TX bytes:468 (468.0 B)
> 
> Can somebody help me to understand why the xenbr0 bridge no longer comes
> up?
> 
> 
> -- 
> Flavio
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 

-- 
View this message in context: 
http://old.nabble.com/Xen-bridge-no-longer-working-tp29119798p29127395.html
Sent from the Xen - User mailing list archive at Nabble.com.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>