WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] The Host cpu(s) in this machine do not have support for

To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] The Host cpu(s) in this machine do not have support for full virtualization
From: Armando Montiel Caba <amontiel@xxxxxxxxxx>
Date: Tue, 22 Jun 2010 11:54:31 -0500
Delivery-date: Tue, 22 Jun 2010 09:56:08 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <5DB0519124BB3D4DBEEB14426D4AC7EA17E924E050@xxxxxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <4C20DDC2.2000407@xxxxxxxxxx> <5DB0519124BB3D4DBEEB14426D4AC7EA17E924E050@xxxxxxxxxxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; es-AR; rv:1.9.1.10) Gecko/20100512 Lightning/1.0b1 Thunderbird/3.0.5
Hi Matej,

Technical support tell me that Hyper-V is enabled.

Is this enough?

xm dmesg messages show that is xen capable.

Can I review something else ?


El 22/06/2010 11:22 a.m., Matej Zary escribió:
> Do you have virtualisation support enabled in your BIOS (VT-i, VT-d...)?
>
>
>
> Regards
>
> Matej
>
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Armando Montiel 
> Caba
> Sent: Tuesday, June 22, 2010 5:59 PM
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] The Host cpu(s) in this machine do not have support for 
> full virtualization
>
> I'm geting this message from virt-manager.
>
> Server: SuperMicro X8SIL with INTEL X3440
>
> Here is my logs
>
>
> /var/log/dmesg:
>
> Bootdata ok (command line is ro root=/dev/md2) Linux version 
> 2.6.18-194.3.1.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 
> 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13
> 13:49:53 EDT 2010
> BIOS-provided physical RAM map:
>  Xen: 0000000000000000 - 00000001dc26c000 (usable) On node 0 totalpages: 
> 1950316
>   DMA zone: 1950316 pages, LIFO batch:31 DMI present.
> ACPI: RSDP (v002 ACPIAM                                ) @
> 0x00000000000fa110
> ACPI: XSDT (v001 SMCI            0x20100225 MSFT 0x00000097) @
> 0x00000000bf7a0100
> ACPI: FADT (v003 022510 FACP1918 0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7a0290
> ACPI: MADT (v001 022510 APIC1918 0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7a0390
> ACPI: MCFG (v001 022510 OEMMCFG  0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7a0430
> ACPI: OEMB (v001 022510 OEMB1918 0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7ae040
> ACPI: HPET (v001 022510 OEMHPET  0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7aa5f0
> ACPI: GSCI (v001 022510 GMCHSCI  0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7ae0c0
> ACPI: DMAR (v001    AMI  OEMDMAR 0x00000001 MSFT 0x00000097) @
> 0x00000000bf7b00f0
> ACPI: SSDT (v001 DpgPmm    CpuPm 0x00000012 INTL 0x20051117) @
> 0x00000000bf7b2800
> ACPI: EINJ (v001  AMIER AMI_EINJ 0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7aa630
> ACPI: BERT (v001  AMIER AMI_BERT 0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7aa7c0
> ACPI: ERST (v001  AMIER AMI_ERST 0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7aa7f0
> ACPI: HEST (v001  AMIER ABC_HEST 0x20100225 MSFT 0x00000097) @ 
> 0x00000000bf7aa9a0
> ACPI: DSDT (v001  10605 10605000 0x00000000 INTL 0x20051117) @ 
> 0x0000000000000000
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to xen
> Using ACPI (MADT) for SMP configuration information Allocating PCI resources 
> starting at c2000000 (gap: c0000000:20000000) Built 1 zonelists.  Total 
> pages: 1950316 Kernel command line: ro root=/dev/md2 Initializing CPU#0 PID 
> hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2533.406 MHz 
> processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) 
> Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO 
> TLB enabled:
>  Aperture:     64 megabytes
>  Kernel range: 0xffff88000a357000 - 0xffff88000e357000
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> Memory: 7563760k/7801264k available (2512k kernel code, 228628k reserved, 
> 1396k data, 184k init) Calibrating delay using timer specific routine.. 
> 6334.75 BogoMIPS
> (lpj=12669518)
> Security Framework v1.0.0 initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> selinux_register_security:  Registering secondary module capability 
> Capability LSM initialized as secondary Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 256K
> CPU: L3 cache: 8192K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> (SMP-)alternatives turned off
> ACPI: Core revision 20060707
> Initializing CPU#1
> Initializing CPU#2
> Initializing CPU#3
> Initializing CPU#4
> Initializing CPU#5
> Initializing CPU#6
> Brought up 8 CPUs
> sizeof(vma)=168 bytes
> sizeof(page)=56 bytes
> sizeof(inode)=560 bytes
> sizeof(dentry)=216 bytes
> sizeof(ext3inode)=760 bytes
> sizeof(buffer_head)=96 bytes
> sizeof(skbuff)=248 bytes
> Initializing CPU#7
> migration_cost=15
> checking if image is initramfs... it is
> Grant table initialized
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) Linux Plug and 
> Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 15 devices
> xen_mem: Initialising balloon driver.
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> pnp: 00:08: ioport range 0x164e-0x164f has been reserved
> pnp: 00:09: ioport range 0xa00-0xa0f has been reserved
> pnp: 00:09: ioport range 0xa10-0xa1f has been reserved
> PCI: Bridge: 0000:00:03.0
>   IO window: disabled.
>   MEM window: disabled.
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:05.0
>   IO window: disabled.
>   MEM window: disabled.
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.0
>   IO window: disabled.
>   MEM window: disabled.
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.4
>   IO window: d000-dfff
>   MEM window: fb500000-fb5fffff
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.5
>   IO window: e000-efff
>   MEM window: fb600000-fb6fffff
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1e.0
>   IO window: disabled.
>   MEM window: fb700000-fbffffff
>   PREFETCH window 0x00000000fa000000-0x00000000faffffff
> GSI 16 sharing vector 0x98 and IRQ 16
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:05.0 to 64 GSI 17 sharing vector 
> 0xA0 and IRQ 17
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.4 to 64
> ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.5 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP 
> established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind 
> hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536) TCP reno 
> registered
> audit: initializing netlink socket (disabled) type=2000 
> audit(1277201045.924:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> SELinux:  Registering netfilter hooks
> Initializing Cryptographic API
> alg: No test for crc32c (crc32c-generic)
> ksign: Installing public key data
> Loading keyring
> - Added public key 7664334D64FC7447
> - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io 
> scheduler anticipatory registered io scheduler deadline registered io 
> scheduler cfq registered (default) Boot video device is 0000:06:03.0
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> PCI: Setting latency timer of device 0000:00:1c.4 to 64
> PCI: Setting latency timer of device 0000:00:1c.5 to 64
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI (exconfig-0456): Dynamic 
> SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707] ACPI 
> (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] 
> [20060707]
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) Real Time Clock Driver v1.12ac
> hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 
> Linux agpgart interface v0.101 (c) Dave Jones
> brd: module loaded
> Xen virtual console successfully installed as ttyS0 Event-channel device 
> installed.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Initalizing network drop monitor service Write protecting the kernel 
> read-only data: 483k GSI 18 sharing vector 0xD0 and IRQ 18
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1d.0 to 64 ehci_hcd 
> 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus 
> registered, assigned bus number 1 ehci_hcd 0000:00:1d.0: debug port 2
> PCI: cache line size of 32 is not supported by device 0000:00:1d.0 ehci_hcd 
> 0000:00:1d.0: irq 18, io mem 0xfb4fc000 ehci_hcd 0000:00:1d.0: USB 2.0 
> started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 
> 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) 
> USB Universal Host Controller Interface driver v3.0
> md: raid1 personality registered for level 1 SCSI subsystem initialized 
> libata version 3.00 loaded.
> ata_piix 0000:00:1f.2: version 2.12
> GSI 19 sharing vector 0xD8 and IRQ 19
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 
> 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
> ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 usb 1-1: 
> new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration 
> #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 8 ports 
> detected
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
> ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata1.00: configured for UDMA/133
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133
> ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata2.00: configured for UDMA/133
>   Vendor: ATA       Model: WDC WD1002FBYS-0  Rev: 03.0
>   Type:   Direct-Access                      ANSI SCSI revision: 05
> SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back SCSI device sda: 1953525168 512-byte 
> hdwr sectors (1000205 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
>  sda: sda1 sda2 sda3
> sd 0:0:0:0: Attached scsi disk sda
>   Vendor: ATA       Model: WDC WD1002FBYS-0  Rev: 03.0
>   Type:   Direct-Access                      ANSI SCSI revision: 05
> SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back SCSI device sdb: 1953525168 512-byte 
> hdwr sectors (1000205 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
>  sdb: sdb1 sdb2 sdb3
> sd 1:0:0:0: Attached scsi disk sdb
> ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 
> 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> scsi2 : ata_piix
> scsi3 : ata_piix
> ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
> ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
> ata3: SATA link down (SStatus 0 SControl 300)
> ata4: SATA link down (SStatus 0 SControl 300) Initializing USB Mass Storage 
> driver...
> usbcore: registered new driver usb-storage USB Mass Storage support 
> registered.
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised:
> dm-devel@xxxxxxxxxx
> device-mapper: dm-raid45: initialized v0.2594l
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: considering sdb3 ...
> md:  adding sdb3 ...
> md: sdb2 has different UUID to sdb3
> md: sdb1 has different UUID to sdb3
> md:  adding sda3 ...
> md: sda2 has different UUID to sdb3
> md: sda1 has different UUID to sdb3
> md: created md2
> md: bind<sda3>
> md: bind<sdb3>
> md: running: <sdb3><sda3>
> raid1: raid set md2 active with 2 out of 2 mirrors
> md: considering sdb2 ...
> md:  adding sdb2 ...
> md: sdb1 has different UUID to sdb2
> md:  adding sda2 ...
> md: sda1 has different UUID to sdb2
> md: created md1
> md: bind<sda2>
> md: bind<sdb2>
> md: running: <sdb2><sda2>
> raid1: raid set md1 active with 2 out of 2 mirrors
> md: considering sdb1 ...
> md:  adding sdb1 ...
> md:  adding sda1 ...
> md: created md0
> md: bind<sda1>
> md: bind<sdb1>
> md: running: <sdb1><sda1>
> raid1: raid set md0 active with 2 out of 2 mirrors
> md: ... autorun DONE.
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux:  Disabled at runtime.
> SELinux:  Unregistering netfilter hooks
> type=1404 audit(1277201077.722:2): selinux=0 auid=4294967295 ses=4294967295
> input: PC Speaker as /class/input/input0 sd 0:0:0:0: Attached scsi generic 
> sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> eth0: (PCI Express:2.5GB/s:Width x1) 00:25:90:04:78:74
> eth0: Intel(R) PRO/1000 Network Connection
> eth0: MAC: 3, PHY: 8, PBA No: 0101ff-0ff
> ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:05:00.0 to 64
> eth1: (PCI Express:2.5GB/s:Width x1) 00:25:90:04:78:75
> eth1: Intel(R) PRO/1000 Network Connection
> eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff GSI 20 sharing vector 0x51 and IRQ 20
> ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> floppy0: no floppy controllers found
> lp: driver loaded but no devices found
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Mapper loaded
> dell-wmi: No known WMI GUID found
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> device-mapper: multipath: version 1.0.5 loaded
> loop: loaded (max 8 devices)
> EXT3 FS on md2, internal journal
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on md0, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 8193016k swap on /dev/md1.  Priority:-1 extents:1 across:8193016k*
>
> *
>
> # cat /var/log/xen/console/hypervisor.log (xm dmesg)
>  __  __            _____  _   ____     _  ___  _  _    _____  _       _ ____
>  \ \/ /___ _ __   |___ / / | |___ \   / |/ _ \| || |  |___ / / |  ___| |
> ___|
>   \  // _ \ '_ \    |_ \ | |   __) |__| | (_) | || |_   |_ \ | | / _ \
> |___ \
>   /  \  __/ | | |  ___) || |_ / __/|__| |\__, |__   _| ___) || ||  __/
> |___) |
>  /_/\_\___|_| |_| |____(_)_(_)_____|  |_|  /_/
> |_|(_)____(_)_(_)___|_|____/
>
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
>
>  Xen version 3.1.2-194.3.1.el5 (mockbuild@xxxxxxxxxx) (gcc version 4.1.2
> 20080704 (Red Hat 4.1.2-48)) Thu May 13 12:59:18 EDT 2010  Latest ChangeSet: 
> unavailable
>
> (XEN) Command line:
> (XEN) Video information:
> (XEN)  VGA is text mode 80x25, font 8x16
> (XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN)  EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN)  Found 2 MBR signatures
> (XEN)  Found 2 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN)  0000000000000000 - 000000000009ec00 (usable)
> (XEN)  000000000009ec00 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 00000000bf790000 (usable)
> (XEN)  00000000bf79e000 - 00000000bf7a0000 type 9
> (XEN)  00000000bf7a0000 - 00000000bf7ae000 (ACPI data)
> (XEN)  00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS)
> (XEN)  00000000bf7d0000 - 00000000bf7e0000 (reserved)
> (XEN)  00000000bf7ed000 - 00000000c0000000 (reserved)
> (XEN)  00000000e0000000 - 00000000f0000000 (reserved)
> (XEN)  00000000fed20000 - 00000000fed40000 (reserved)
> (XEN)  00000000fee00000 - 00000000fee01000 (reserved)
> (XEN)  0000000100000000 - 0000000240000000 (usable)
> (XEN) System RAM: 8183MB (8379576kB)
> (XEN) Xen heap: 13MB (13712kB)
> (XEN) Domain heap initialised: DMA width 32 bits
> (XEN) Processor #0 7:14 APIC version 21
> (XEN) Processor #2 7:14 APIC version 21
> (XEN) Processor #4 7:14 APIC version 21
> (XEN) Processor #6 7:14 APIC version 21
> (XEN) Processor #1 7:14 APIC version 21
> (XEN) Processor #3 7:14 APIC version 21
> (XEN) Processor #5 7:14 APIC version 21
> (XEN) Processor #7 7:14 APIC version 21
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2533.407 MHz processor.
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging detected and enabled.
> (XEN) VMX: MSR intercept bitmap enabled
> (XEN) I/O virtualisation disabled
> (XEN) CPU0: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Booting processor 1/2 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU1: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Booting processor 2/4 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU2: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Booting processor 3/6 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU3: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Booting processor 4/1 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU4: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Booting processor 5/3 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU5: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Booting processor 6/5 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU6: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Booting processor 7/7 eip 90000
> (XEN) , L1 D cache: 32K
> (XEN) VMX: VPID is available.
> (XEN) CPU7: Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz stepping 05
> (XEN) Total of 8 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN)  -> Using new ACK method
> (XEN) Platform timer overflows in 14998 jiffies.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Brought up 8 CPUs
> (XEN) xenoprof: Initialization failed. Intel processor model 30 for P6 class 
> family is not supported
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2f3d70
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff804f3d80 memsz=0x14c510
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff80641000 memsz=0xc08
> (XEN) elf_parse_binary: phdr: paddr=0xffffffff80642000 memsz=0x11becc
> (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff8075decc
> (XEN) elf_xen_parse_note: GUEST_OS = "linux"
> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000
> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000
> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000
> (XEN) elf_xen_parse_note: FEATURES =
> "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel"
> (XEN) elf_xen_parse_note: LOADER = "generic"
> (XEN) elf_xen_addr_calc_check: addresses:
> (XEN)     virt_base        = 0xffffffff80000000
> (XEN)     elf_paddr_offset = 0xffffffff80000000
> (XEN)     virt_offset      = 0x0
> (XEN)     virt_kstart      = 0xffffffff80200000
> (XEN)     virt_kend        = 0xffffffff8075decc
> (XEN)     virt_entry       = 0xffffffff80200000
> (XEN)  Xen  kernel: 64-bit, lsb, compat32
> (XEN)  Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 
> 0xffffffff8075decc
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000232000000->0000000234000000 (1940076 pages
> to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: ffffffff80200000->ffffffff8075decc
> (XEN)  Init. ramdisk: ffffffff8075e000->ffffffff80e0d800
> (XEN)  Phys-Mach map: ffffffff80e0e000->ffffffff81ceb360
> (XEN)  Start info:    ffffffff81cec000->ffffffff81cec49c
> (XEN)  Page tables:   ffffffff81ced000->ffffffff81d00000
> (XEN)  Boot stack:    ffffffff81d00000->ffffffff81d01000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff82000000
> (XEN)  ENTRY ADDRESS: ffffffff80200000
> (XEN) Dom0 has maximum 8 VCPUs
> (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804f3d70
> (XEN) elf_load_binary: phdr 1 at 0xffffffff804f3d80 -> 0xffffffff80640290
> (XEN) elf_load_binary: phdr 2 at 0xffffffff80641000 -> 0xffffffff80641c08
> (XEN) elf_load_binary: phdr 3 at 0xffffffff80642000 -> 0xffffffff8067f0a8
> (XEN) Initrd len 0x6af800, start at 0xffffffff8075e000
> (XEN) Scrubbing Free RAM: ...done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: Errors and warnings
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to 
> Xen).
> (XEN) Freed 112kB init memory.
>
> # rpm -qa | grep -i xen
> xen-libs-3.0.3-105.el5_5.3
> xen-libs-3.0.3-105.el5_5.3
> xen-3.0.3-105.el5_5.3
> kernel-xen-2.6.18-194.3.1.el5
>
> # rpm -qa | grep -i virt
> libvirt-0.6.3-33.el5
> python-virtinst-0.400.3-9.el5
> libvirt-python-0.6.3-33.el5
> libvirt-0.6.3-33.el5
> virt-manager-0.6.1-12.el5
> virt-viewer-0.0.2-3.el5
>
> # cat /var/log/xen/xend.log
>
> [2010-06-22 06:03:25 xend 3184] INFO (SrvDaemon:190) Xend stopped due to 
> signal 15.
> [2010-06-22 06:05:02 xend 3166] INFO (SrvDaemon:283) Xend Daemon started
> [2010-06-22 06:05:02 xend 3166] INFO (SrvDaemon:287) Xend changeset:
> unavailable.
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:229) XendDomainInfo.recreate({'paused': 0, 'cpu_time':
> 11234791979L, 'ssidref': 0, 'hvm': 0, 'shutdown_reason': 0, 'dying': 0,
> 'mem_kb': 7793072L, 'domid': 0, 'max_vcpu_id': 7, 'crashed': 0,
> 'running': 1, 'maxmem_kb': 17179869180L, 'shutdown': 0, 'online_vcpus':
> 8, 'handle': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0],
> 'blocked': 0})
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] INFO (XendDomainInfo:241) 
> Recreating domain 0, UUID 00000000-0000-0000-0000-000000000000.
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] WARNING
> (XendDomainInfo:263) No vm path in store for existing domain 0
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid':
> '00000000-0000-0000-0000-000000000000', 'on_reboot': 'restart',
> 'on_poweroff': 'destroy', 'name': 'Domain-0', 'xend/restart_count': '0',
> 'vcpus': '8', 'vcpu_avail': '255', 'memory': '7611', 'on_crash':
> 'restart', 'maxmem': '7611'}
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:1028) Storing domain details: {'cpu/1/availability':
> 'online', 'cpu/3/availability': 'online', 'name': 'Domain-0',
> 'console/limit': '1048576', 'cpu/2/availability': 'online', 'vm':
> '/vm/00000000-0000-0000-0000-000000000000', 'domid': '0',
> 'cpu/7/availability': 'online', 'cpu/0/availability': 'online',
> 'memory/target': '7793664', 'cpu/5/availability': 'online',
> 'cpu/6/availability': 'online', 'cpu/4/availability': 'online'}
> [2010-06-22 06:05:02 xend 3166] DEBUG (XendDomain:164) number of vcpus to use 
> is 0
> [2010-06-22 06:05:02 xend 3166] INFO (SrvServer:116) unix 
> path=/var/lib/xend/xend-socket
> [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG
> (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch

Attachment: amontiel.vcf
Description: Vcard

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>