On Fri, Apr 23, 2010 at 07:28:49AM +0000, ilish ilish wrote:
> Hi again,
> Thank you very much. First there is no specific reason for
> using 2.6.29-xen-r4. And I will try lspci -v, and send you the output of
> that.
> By the way I am new in this area and actually do not know pvops dom0
> kernel is. Is this a specific kernel version?
pvops dom0 is the default dom0 kernel in Xen 4.0.0.
See these wiki pages:
- http://wiki.xensource.com/xenwiki/Xen4.0
- http://wiki.xensource.com/xenwiki/XenDom0Kernels
- http://wiki.xensource.com/xenwiki/XenParavirtOps
-- Pasi
> Ilhan
> > Date: Fri, 23 Apr 2010 10:03:05 +0300
> > From: pasik@xxxxxx
> > To: ilishim@xxxxxxxxxxx
> > CC: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-users] Re: [Xen-devel] Scrubbing free ram
> >
> > On Fri, Apr 23, 2010 at 06:52:42AM +0000, ilish ilish wrote:
> > > Hi Pasi,
> > > Thank you very much for your concern about my issue. After sending
> email
> > > to xen-devel, I switch to Debian 5 to install Xen, I do not have any
> > > problems but I am still very curious about the problem. Since I
> installed
> > > Debian now, I just ha! ve this part of my grub.conf entry:
> > > title pv_ops dom0-test (2.6.29) with serial console
> > > root (hd0,2)
> > > kernel /boot/xen-4.0.0-rc6.gz dom0_mem=1024M loglvl=all
> > > guest_loglvl=all sync_console console_to_ring com1=115200,8n1
> console=com1
> > > lapic=debug apic_verbosity=debug apic=debug iommu=off
> > > module /boot/vmlinuz-2.6.29-xen-r4 ro
> > > root=UUID=e173017f-7b9a-4111-acf7-b9f0d02a8936 console=hvc0
> > > earlyprintk=xen nomodeset! initcall_debug debug loglevel=10
> > > module /boot/initrd-2.6.29-xen-r4.img
> > > Could you please help me about my issue?
> >
> >
> > Please update to 4.0.0 final, or even 4.0.1-rc version..
> > many bugs fixed after 4.0.0-rc6.
> >
> > > I also want to ask you something about Debian 5+Xen 4.0 . I booted
> with
> > > Xen in my Debian installe! d machine. However there is a problem about
> the
> > > eth0. Xen 4.0 did not recognize my eth0. I do not know what to do
> about
> > > this. Do you have any idea about this?
> > > Thank you again very much for your time and help.
> > >
> >
> > Xen doesn't have drivers for hardware/nics. It's the Linux dom0 kernel
> that has the NIC driver.
> > Does "lspci -v" list the nic (when booted to Xen dom0)?
> >
> > Also please paste your dmesg.
> >
> > Also is there a specific reason you're using 2.6.29-xen-r4 (xenlinux)
> kernel
> > instead of the pvops dom0 kernel?
> >
> > -- Pasi
> >
> > > Ilhan
> > > > Date: Fri, 23 Apr 2010 09:14:12 +0300
> > > > From: pasik@xxxxxx
> > > > To: ilishim@xxxxxxxxxxx
> > > > CC: xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Subject: [Xen-users] Re: [Xen-devel] Scrubbing free ram
> > > >
> > > > On Thu, Apr 22, 2010 a! t 09:54:30PM +0000, ilish ilish wrote:
> > > > > Hi everyone,
> > > > >
> > > > > I am working on a project whose goal is evaluating the pe!
> rformance
> > > of the
> > > > > vTPM Manager. For this project I am using Xen 4.1, Kernel
> 2.6.31.13
> > > with
> > > > > Fedora11. I I finished all installation and configuration parts.
> Now I
> > > > > need to boot the system with Xen but while booting, it is freezing
> at
> > > the
> > > > > step "scrubbing free ram". What can be cause this problem and how
> can
> > > I
> > > > > figure it out? I really appreciate if you can help me.
> > > > >
> > > >
> > > > Please paste your grub.conf.
> > > >
> > > > Also please check this wiki page:
> > > > http://wiki.xensource.com/xenwiki/XenSerialConsol! e
> > > >
> > > > and:
> > > > http://wiki.xensource.com/xenwiki/XenParavirtOps
> > > >
> > > > -- Pasi
> > > >
> > > >
> >
>
> --------------------------------------------------------------------------
>
> Hotmail: Microsoft*un güçlü ÝSTENMEYEN POSTA korumasý ile güvenilir
> e-posta. [1]Hemen kaydolun.
>
> References
>
> Visible links
> 1. https://signup.live.com/signup.aspx?id=60969
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home