WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] XenSerialConsole help + GRUB2 (Machine locks up on boot)

To: <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] XenSerialConsole help + GRUB2 (Machine locks up on boot)
From: Mike Viau <viaum@xxxxxxxxxxxxxxx>
Date: Fri, 9 Apr 2010 16:58:24 -0400
Delivery-date: Wed, 14 Apr 2010 04:26:23 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
Importance: Normal
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Hello,

I am trying to setup a Xen serial console for easily debugging the full kernel boot messages even if it crashes with the help from the following wiki pages:


http://wiki.xensource.com/xenwiki/XenSerialConsole
http://wiki.xensource.com/xenwiki/XenParavirtOps


I noticed the wiki was written for use with grub legacy. Therefor I am not certain if the serial console issue is with the way the grub2 package implemented serial consoles.


My problem is the machine locks up on boot after printing the message shown in the attached screen shot. I just get a blank screen with a blinking "_" prompt at the top left hand corner of the screen.


Does any have a non-standard PCI serial port Xen serial console working with grub2? What does your /etc/default/grub file and menuentrys look like? What does your /etc/inittab look like?


My motherboard does not have a serial port or even serial headers connectors on the board. Therefor I purchased an add-in serial card to obtain serial ports on the machine.


Motherboard:
http://www.intel.com/products/desktop/motherboards/DP55WG/DP55WG-overview.htm
http://ark.intel.com/Product.aspx?id=40078

Add-in serial card:
"Cables Unlimited IOC-2200 2-Port DB9 Serial PCI I/O Card" (http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=1431863&CatId=1422)


My GRUB2 configuration files are also attached from:

/etc/default/grub
/boot/grub/grub.cfg (trying to boot "Setting up Xen 4.0.0 / PVOPS 2.6.32-4-xen-amd64 with a serial console" entry)


Lastly a snippet from lspci -vvv

05:01.0 Serial controller: NetMos Technology Device 9865 (prog-if 02 [16550])
    Subsystem: Device a000:1000
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 22
    Region 0: I/O ports at 1008 [size=8]
    Region 1: Memory at f0007000 (32-bit, non-prefetchable) [size=4K]
    Region 4: Memory at f0006000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [48] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=1 PME-

05:01.1 Serial controller: NetMos Technology Device 9865 (prog-if 02 [16550])
    Subsystem: Device a000:1000
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 21
    Region 0: I/O ports at 1000 [size=8]
    Region 1: Memory at f0005000 (32-bit, non-prefetchable) [size=4K]
    Region 4: Memory at f0004000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [48] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 

Thanks for looking!

-M




Hotmail & Messenger. Get them on your phone now.

Attachment: grub
Description: Binary data

Attachment: grub.cfg
Description: Binary data

Attachment: p_00003.jpg
Description: JPEG image

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users