WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Error booting git xen/stable-2.6.31.12

To: Xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Error booting git xen/stable-2.6.31.12
From: Carlos Echevarne <cechevarne@xxxxxxxxx>
Date: Wed, 24 Mar 2010 11:46:11 +0100
Cc:
Delivery-date: Wed, 24 Mar 2010 03:48:03 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:date:message-id:subject :from:to:content-type; bh=rQ7/sDZQ4Pq3VLh/hrt7tVYTOclvRJtcJxx6zV3lkJQ=; b=EebO+MydvVWrKwzdDAEIoDLEqdik1nxxG4Qfa600LAaGeCoQB8+Up5YjkRrNuvFoeK Ntkz6KE2zLFuBkq/9qdolwIgv9doZCavFIaUi5NEJZ/gbv5/v8V3rCovy77AuCvZEQgm AQtipYyfpMzEzlv7OfmeIxgFVIkqABgLUbZb8=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type; b=FCXbEpY6CV9Kzypk/HzzWryj41+lGwuTO4OHIHaHMxCIL4OnoCBUWtTLC1gGfmiYmP F1ZHB+mkF+N2d23sg/1Z7QXKqH8FmlALbBbhd1TDI2rzShKxWbkagUXAEse/SFQEZOqB Hb6H1mNyx68Sp6Cv/qYSP5zhWSITlvGyeB2U4=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
I obtain this error when booting (xen/stable-2.6.31.x|xen/master) on Xen 3.4.2 x86_64

xen_major              : 3
xen_minor              : 4
xen_extra              : .2

I had no errors with the same kernel, version of the day 2010-03-03

To compile the kernel i use this configuration "http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.31.6-pvops-dom0-xen-master-x86_64"

XenSerialConsole mensage when system hangs and attached console error.

(XEN) Freed 136kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) io_apic.c:2126:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000000f0, new_entry=00010000
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2126:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000000f1, new_entry=00010000
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2139:
(XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0
(XEN) ioapic_guest_write: old_entry=00010000, new_entry=000000f0
(XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!


Hardware spects

00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation X58 I/O Hub Control Status and RAS Registers (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.3 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
03:00.0 PCI bridge: Integrated Device Technology, Inc. PES12N3A PCI Express Switch (rev 0e)
04:02.0 PCI bridge: Integrated Device Technology, Inc. PES12N3A PCI Express Switch (rev 0e)
04:04.0 PCI bridge: Integrated Device Technology, Inc. PES12N3A PCI Express Switch (rev 0e)
05:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
05:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
06:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
06:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
07:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 (rev 0a)


Best Regards!!

Attachment: xen-error.jpg
Description: JPEG image

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>
  • [Xen-users] Error booting git xen/stable-2.6.31.12, Carlos Echevarne <=