WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 		  
Home Products Support Community News
 
   
 

xen-users

[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Xen-users] xen Installation through YUM

from [Pasi Kärkkäinen] [Permanent Link][Original]
To: kishore kumar <bodkekumar@xxxxxxxxx>
Subject: Re: [Xen-users] xen Installation through YUM
From: Pasi Kärkkäinen <pasik@xxxxxx>
Date: Sat, 27 Feb 2010 00:28:12 +0200
Cc: Boris Derzhavets <bderzhavets@xxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Fri, 26 Feb 2010 14:28:49 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <9f975f341002261423q54c784f0n35eb8c22e7430d01@xxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <20100226095019.GK2761@xxxxxxxxxxx> <326134.43329.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx> <9f975f341002261423q54c784f0n35eb8c22e7430d01@xxxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mutt/1.5.18 (2008-05-17) 
On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar wrote:
>    I have already set gpgcheck=0 in /etc/yum.conf  file.
> 
>    I did not clearly understood on what you said in the next line.........
> 
>    to install unsigned rpms supposed to be built latter.
>    Activate rpmbuild on F12:-
> 
>    # yum install transfig texi2html libaio-devel dev86 \
>      glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
>    what should I do can you please clarify me on the above statements you
>    said???
> 
>    I followed your next step and downloaded xen-3.4.2-2.fc13.src.rpm from
>    internet and started doing the steps mentioned by you.  but at the very
>    step I get the messages saying
> 
>    After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
> 
>    Any idea what went wrong again??
> 

Nothing went wrong, those are just warnings.

-- Pasi

>    THanks
>    bk
> 
>    On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets
>    <[1]bderzhavets@xxxxxxxxx> wrote:
> 
> Set in /etc/yum.conf set gpgcheck=0 ( temporarily )
> to install unsigned rpms supposed to be built latter.
> Activate rpmbuild on F12:-
> 
> # yum install transfig texi2html libaio-devel dev86 \
>   glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
> 
> 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm. Download from Net
> xen-3.4.2-2.fc13.src.rpm. Now :-
> 
> # rpm -iv xen-3.4.2-2.fc13.src.rpm
> # cd
> # cd rpmbuild/SPEC
> # rpmbuild -bb ./xen.spec
> # cd ../RPMS/x86_64
> yum install xen-3.4.2-2.fc12.x86_64.rpm \
> xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \
> xen-devel-3.4.2-2.fc12.x86_64.rpm \
> xen-doc-3.4.2-2.fc12.x86_64.rpm \
> xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \
> xen-libs-3.4.-2.fc12.x86_64.rpm \
> xen-runtime-3.4.2-2.fc12.x86_64.rpm
> 
> Xen Hypervisor 3.4.2 installed
> 
> 2. Install Libvirt
> 
> # yum install libvirt libvirt-python python-virtinst \
> virt-manager virt-viewer
> 
> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> Git Repository to support Xen 3.4.2 Dom0.
> 
> # git clone git://[2]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> linux-2.6-xen
> # cd linux-2.6-xen
> # make menuconfig ( setup Xen Dom0 support)
> # make -j(x)(number_of_kernels)
> # make modules_install install
> 
> You may also want to build 2.6.32.9 pvops
> 
> # git checkout origin/xen/stable -b  xen/stable
> 
> I just switched from xen/master ( default 2.6.31.6 ) to xen/stable (the most
> recent supposed to become LTS - 2.6.32.9)
> 
> Boris.
> 
> --- On Fri, 2/26/10, Pasi Kärkkäinen <[3]pasik@xxxxxx> wrote:
> 
>   From: Pasi Kärkkäinen <[4]pasik@xxxxxx>
>   Subject: Re: [Xen-users] xen Installation through YUM
>   To: "kishore kumar" <[5]bodkekumar@xxxxxxxxx>
>   Cc: [6]xen-users@xxxxxxxxxxxxxxxxxxx
>   Date: Friday, February 26, 2010, 4:50 AM
> 
>   On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar wrote:
>   >    HI,
>   >
>   >    I am trying to install xen through yum. Here is what I did.
>   >
>   >
>   >    [root@localhost Kishore]# yum install kernel-xen xen
>   >
>   >    Setting up Install Process
>   >
>   >    Resolving Dependencies
>   >
>   >    --> Running transaction check
>   >
>   >    ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set to be installed
>   >
>   >    --> Processing Dependency: kernel-firmware >= 2.6.31.9-174.fc12 for
>   >    package: kernel-2.6.31.9-174.fc12.x86_64
>   >
>   >    ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    --> Processing Dependency: xen-runtime = 3.4.2-1.fc12 for package:
>   >    xen-3.4.2-1.fc12.x86_64
>   >
>   >    --> Processing Dependency: PyXML for package: xen-3.4.2-1.fc12.x86_64
>   >
>   >    --> Running transaction check
>   >
>   >    ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to be updated
>   >
>   >    ---> Package kernel-firmware.noarch 0:2.6.31.9-174.fc12 set to be 
> updated
>   >
>   >    ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    --> Processing Dependency: xen-libs = 3.4.2-1.fc12 for package:
>   >    xen-runtime-3.4.2-1.fc12.x86_64
>   >
>   >    --> Processing Dependency: xen-hypervisor-abi = 3.4 for package:
>   >    xen-runtime-3.4.2-1.fc12.x86_64
>   >
>   >    --> Running transaction check
>   >
>   >    ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    --> Finished Dependency Resolution
>   >
>   >    Dependencies Resolved
>   >
>   >
>   
> ================================================================================
>   >
>   >    Package Arch Version Repository Size
>   >
>   >
>   
> ================================================================================
>   >
>   >    Installing:
>   >
>   >    kernel x86_64 2.6.31.9-174.fc12 updates-released 20 M
>   >
>   >    xen x86_64 3.4.2-1.fc12 updates-released 898 k
>   >
>   >    Installing for dependencies:
>   >
>   >    PyXML x86_64 0.8.4-17.fc12 updates-released 906 k
>   >
>   >    xen-hypervisor x86_64 3.4.2-1.fc12 updates-released 2.9 M
>   >
>   >    xen-runtime x86_64 3.4.2-1.fc12 updates-released 4.0 M
>   >
>   >    Updating for dependencies:
>   >
>   >    kernel-firmware noarch 2.6.31.9-174.fc12 updates-released 906 k
>   >
>   >    xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k
>   >
>   >    Transaction Summary
>   >
>   >
>   
> ================================================================================
>   >
>   >    Install 5 Package(s)
>   >
>   >    Upgrade 2 Package(s)
>   >
>   >    Total download size: 29 M
>   >
>   >    Is this ok [y/N]: y
>   >
>   >    Downloading Packages:
>   >
>   >    (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB 00:00
>   >
>   >    (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB 00:02
>   >
>   >    (3/7): kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906 kB 00:00
>   >
>   >    (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00
>   >
>   >    (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm | 2.9 MB 00:00
>   >
>   >    (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB 00:00
>   >
>   >    (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0 MB 00:00
>   >
>   >
>   
> --------------------------------------------------------------------------------
>   >
>   >    Total 6.7 MB/s | 29 MB 00:04
>   >
>   >    warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: NOKEY, key 
> ID
>   >    57bbccba
>   >
>   >     Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm is not installed
>   >
>   >
>   >
>   >    Did Xen got installed with this?
>   >
>   >    Will the grub.conf be automatically updtaed after I run this command.
>   >    (But I dont see my grub.conf being updated)
>   >
>   >    Any Idea what went wrong here.
>   >
> 
>   Fedora 12 doesn't include Xen dom0 capable kernel, see:
>   [7]http://fedoraproject.org/wiki/Features/XenPvopsDom0
> 
>   You need to get one of the 'testing' rpms, or compile it yourself.
> 
>   -- Pasi
> 
>   _______________________________________________
>   Xen-users mailing list
>   [8]Xen-users@xxxxxxxxxxxxxxxxxxx
>   [9]http://lists.xensource.com/xen-users
> 
> References
> 
>    Visible links
>    1. mailto:bderzhavets@xxxxxxxxx
>    2. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>    3. mailto:pasik@xxxxxx
>    4. mailto:pasik@xxxxxx
>    5. mailto:bodkekumar@xxxxxxxxx
>    6. mailto:xen-users@xxxxxxxxxxxxxxxxxxx
>    7. http://fedoraproject.org/wiki/Features/XenPvopsDom0
>    8. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
>    9. http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Xen-users] xen Installation through YUM, kishore kumar
Next by Date:  [Xen-users] PCI Passthrough without VT-d, Jan Češčut
Previous by Thread:  Re: [Xen-users] xen Installation through YUM, kishore kumar
Next by Thread:  Re: [Xen-users] xen Installation through YUM, kishore kumar
Indexes:  [Date] [Thread] [Top] [All Lists]
 
   

Copyright , Citrix Systems Inc. All rights reserved. Legal and Privacy