WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] RE: [Xen-devel] Domain-Virtual time

Should be "true" system time, i.e. should be very close to what
you see on a "wallclock" (clock on the wall).

HVM's are sadly very widely varied in the parameters needed
to minimize time drift.  In general in the past, timer_mode=0
(or timer_mode unspecified) would be best for 32-bit Linux
domains, timer_mode=1 would be best for Windows domains,
and timer_mode=2 would be best for 64-bit Linux domains.
However, for best results on Linux, this must be combined with
kernel boot parameters that properly select a clock -- and
on some Linux kernel versions, the parameters needed are
different between 32-bit and 64-bit versions of the same
kernel version.  It is up to providers of HVM templates
(aka "appliances") to choose parameters wisely.

Also, you haven't specified your Xen version, but I believe
Xen 4.0 switches the timer_mode default from 0 to 1 so, sadly,
clock behavior may change when moving an unchanged HVM
domain from pre-4.0 to 4.0.

So for best results you should run ntpd in any Linux HVM
domain (and I don't know what you do in Windows).  But
even ntpd may be inadequate to avoid drift if poor parameters
are chosen.

==========

From: Priya [mailto:pbhat@xxxxxxxxxxxx] 
Sent: Thursday, February 25, 2010 9:04 AM
To: xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-devel] Domain-Virtual time

Sorry for multiple emails. I sent the last one from the wrong address.

Can anyone please tell me if the value returned by a time querying instruction 
like gettimeofday() on a Xen (Linux) HVM is the true (System) time or the 
Domain-virtual time?

PS: Domain virtual time is defined as the time that progresses at the same pace 
as cycle counter, but only while a domain is executing. It stops while the 
domain is de-scheduled where as System time accurately reflects the passage of 
real time.

I am facing issues because my HVMs show a time drift. 

Thanks

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users