On Wed, Feb 24, 2010 at 11:11:26PM -0000, Ian Tobin wrote:
> Think i found it
>
> Device drivers -à <*> Xen backend network device
> I have compiled the kernel with that option and now it works at last!
>
> Thanks for the help guys
>
>
Yeah.. netback is definitely a requirement for the vifs to work :)
I didn't even suspect you might be missing that.. oh well.
-- Pasi
>
> Ian
>
>
>
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Boris
> Derzhavets
> Sent: 24 February 2010 17:13
> To: Mike Viau
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Error: Device 0 (vif) could not
> beconnected.Hotplugscripts not working
>
>
>
> Hard link <*> Network Bridging and XEN-> Backend Drivers in Dom0 <*>
> It fixes your config. That's all.
>
> B.
>
> --- On Wed, 2/24/10, Mike Viau <viaum@xxxxxxxxxxxxxxx> wrote:
>
> From: Mike Viau <viaum@xxxxxxxxxxxxxxx>
> Subject: RE: [Xen-users] Error: Device 0 (vif) could not be
> connected.Hotplugscripts not working
> To: bderzhavets@xxxxxxxxx
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Wednesday, February 24, 2010, 10:08 AM
>
> Non-working .config attached.
>
> I have been doing my best to try and read up on the options that were
> setup differently in the working .config you sent me.
>
> Do you know if JF setup some sort of wiki for configuring a xenified
> kernel?
>
> Thanks.
>
>
> -M
>
> --------------------------------------------------------------------------
>
> Date: Wed, 24 Feb 2010 06:59:23 -0800
> From: bderzhavets@xxxxxxxxx
> Subject: RE: [Xen-users] Error: Device 0 (vif) could not be
> connected.Hotplugscripts not working
> To: mike.viau@xxxxxxxxxxxxxxx
> CC: xen-users@xxxxxxxxxxxxxxxxxxx
>
> Hi Mike,
> Submit your .config , please . I would suspect you just missed bridged
> networking
> linking . I always tune manually configs for xenified and pvops kernels
> for about
> 1.5 years. Several times i asked for JF's support, but there were not
> network hotplug
> issues
>
> Boris.
>
> --- On Tue, 2/23/10, Mike Viau <viaum@xxxxxxxxxxxxxxx> wrote:
>
> From: Mike Viau <viaum@xxxxxxxxxxxxxxx>
> Subject: RE: [Xen-users] Error: Device 0 (vif) could not be
> connected.Hotplugscripts not working
> To: itobin@xxxxxxxxxxxxx
> Cc: bderzhavets@xxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx, pasik@xxxxxx
> Date: Tuesday, February 23, 2010, 6:17 PM
>
> I am using udev 0.125-7+lenny3 with a xenified 2.6.31.12 kernel. I was
> getting "Error: Device 0 (vif) could not be connected.Hotplugscripts not
> working" initially, but by using the .config provided thankfully by Boris
> (bderzhavets@xxxxxxxxx) with the exact same setup, the error went away.
>
> I see you are using the PV OPS kernel though......
>
> -M
>
> > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be
> connected.Hotplugscripts not working
> > Date: Tue, 23 Feb 2010 22:59:29 +0000
> > From: itobin@xxxxxxxxxxxxx
> > To: itobin@xxxxxxxxxxxxx; pasik@xxxxxx
> > CC: bderzhavets@xxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
> >
> > Ignore that, it was a slight error in the disk line.
> >
> > Im lost with this, its very odd.
> >
> > -----Original Message-----
> > From: Ian Tobin
> > Sent: 23 February 2010 22:48
> > To: Ian Tobin; Pasi Kärkkäinen
> > Cc: Boris Derzhavets; xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be
> connected.Hotplugscripts not working
> >
> > Going back through the log, only thing i found was this
> >
> > raise XendError("Unknown device type: %s" % name)
> > XendError: Unknown device type: None
> >
> > Not sure if that is the cause
> >
> >
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Ian Tobin
> > Sent: 23 February 2010 22:38
> > To: Pasi Kärkkäinen
> > Cc: Boris Derzhavets; xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: RE: [Xen-users] Error: Device 0 (vif) could not be
> connected.Hotplugscripts not working
> >
> > Well i have upgraded to squeeze which has installed udev (151-2)
> >
> > This still hasn't has any affect :(
> >
> > Also grub2 got installed and it messed up everything, i managed to get
> it back to grub-legacy but thats going to caused more headaches for
> people.
> >
> > Any other ideas?
> >
> > thanks
> >
> >
> >
> > -----Original Message-----
> > From: Pasi Kärkkäinen [mailto:pasik@xxxxxx]
> > Sent: 23 February 2010 20:11
> > To: Ian Tobin
> > Cc: Boris Derzhavets; xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be
> connected.Hotplug scripts not working
> >
> > On Tue, Feb 23, 2010 at 08:06:50PM -0000, Ian Tobin wrote:
> > > Confirmed,
> > >
> > >
> > >
> > > Exact same issue on 32bit. I don't think you can use lenny without
> udev
> > > being installed??
> > >
> >
> > So maybe you need a newer udev version then?
> >
> > -- Pasi
> >
> > >
> > >
> > >
> > >
> > > From: Boris Derzhavets [mailto:bderzhavets@xxxxxxxxx]
> > > Sent: 23 February 2010 19:34
> > > To: Ian Tobin; Pasi Kärkkäinen
> > > Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> > > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be connected.
> > > Hotplug scripts not working
> > >
> > >
> > >
> > > I would guess udev is installed, but 2.6.31.X kernel is to high for
> this
> > > udev.
> > > It doesn't happen on Jaunty&Karmic Servers (9.04, 9.10)
> > >
> > > Boris.
> > > P.S. Just a guess.
> > >
> > > --- On Tue, 2/23/10, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> > >
> > > From: Pasi Kärkkäinen <pasik@xxxxxx>
> > > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be connected.
> > > Hotplug scripts not working
> > > To: "Ian Tobin" <itobin@xxxxxxxxxxxxx>
> > > Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> > > Date: Tuesday, February 23, 2010, 2:24 PM
> > >
> > > On Tue, Feb 23, 2010 at 01:30:12PM -0000, Ian Tobin wrote:
> > > > Hello,
> > > >
> > > > Can anyone help?
> > > >
> > > > I have again installed a fresh OS Debian Lenny 64bit and done the
> > > > following
> > > >
> > > > Xen:
> > > > downloaded xen-3.4.2.tar.gz and extract it
> > > > cd xen-3.4.2
> > > > make xen
> > > > make tools
> > > > make stubdom
> > > >
> > > > cd dist/install/
> > > > cp -R * /
> > > >
> > > > downloaded Jeremys kernel
> > > >
> > > > make menuconfig
> > > > make bzImage
> > > > make modules
> > > > make modules_install
> > > > add to /etc/fstab none /proc/xen xenfs defaults 0 0
> > > > cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.31.6
> > > > cp -a System.map /boot/System.map-2.6.31.6
> > > > cp -a .config /boot/config-2.6.31.6
> > > > depmod -a
> > > > update-initramfs -c -k 2.6.31.6
> > > >
> > > > added grub line and rebooted. XEN starts but DomU just keeps coming
> up
> > > > about hotplug scripts not working.
> > > >
> > > > Anyone?
> > > >
> > >
> > > Does "xm log" have more details about the error? Do you have udev
> > > installed in dom0?
> > >
> > > What's your udev version?
> > >
> > > -- Pasi
> > >
> > > > Thanks
> > > >
> > > > Ian
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: Tej [mailto:[1]bewith.tej@xxxxxxxxx]
> > > > Sent: 20 February 2010 12:04
> > > > To: Ian Tobin
> > > > Cc: [2]xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Subject: Re: [Xen-users] Error: Device 0 (vif) could not be
> connected.
> > > > Hotplug scripts not working
> > > >
> > > > On Sat, Feb 20, 2010 at 5:25 AM, Ian Tobin <[3]itobin@xxxxxxxxxxxxx>
> > > wrote:
> > > > > Hi guys,
> > > > >
> > > > >
> > > > >
> > > > > Familiar issue.
> > > > >
> > > > >
> > > > >
> > > > > Running pv_ops kernel 2.6.31.6 64 bit on Debian Lenny
> > > > >
> > > > >
> > > > >
> > > > > Everytime i build the server i get the same issue. The build goes
> well
> > > > but
> > > > > as soon as i try and start a DomU i get this problem.
> > > > >
> > > > >
> > > > >
> > > > > Have checked the bridge everytime which exists, checked vif config
> > > > which is
> > > > > fine and also have tried live configs from another server to no
> > > > effect.
> > > > >
> > > > >
> > > > >
> > > > > Logs show nothing.
> > > > >
> > > > >
> > > > >
> > > > > Interesting i have found if i have 2 ssh windows open i can issue
> xm
> > > > create
> > > > > domu in one window and while it hangs jump to the other and issue
> xm
> > > > unpause
> > > > > domu and then jump back to the other and issue ctrl+c the and the
> domU
> > > > will
> > > > > start with networking!
> > > > >
> > > > >
> > > > >
> > > > > Im really puzzled but it sounds to me like a bug in one of the xen
> > > > scripts.
> > > > >
> > > > >
> > > > >
> > > > > Anyone else had this issue?
> > > >
> > > > I had this issue couple of time.... But I go for some quick fix for
> it.
> > > > what your udev directory says:
> > > >
> > > > # ls -l /etc/udev/rules.d
> > > >
> > > > If not hotplug scripts exist, copy it from tools (could be some
> > > > dependency issue e.g uuid not installed )
> > > >
> > > > >
> > > > >
> > > > >
> > > > > Ian
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Xen-users mailing list
> > > > > [4]Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > [5]http://lists.xensource.com/xen-users
> > > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Xen-users mailing list
> > > > [6]Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > [7]http://lists.xensource.com/xen-users
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > [8]Xen-users@xxxxxxxxxxxxxxxxxxx
> > > [9]http://lists.xensource.com/xen-users
> > >
> > >
> > >
> > > References
> > >
> > > Visible links
> > > 1. file:///mc/compose?to=bewith.tej@xxxxxxxxx
> > > 2. file:///mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx
> > > 3. file:///mc/compose?to=itobin@xxxxxxxxxxxxx
> > > 4. file:///mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> > > 5. http://lists.xensource.com/xen-users
> > > 6. file:///mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> > > 7. http://lists.xensource.com/xen-users
> > > 8. file:///mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
> > > 9. http://lists.xensource.com/xen-users
> >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
>
> --------------------------------------------------------------------------
>
> Live connected with Hotmail on your phone. [1]Learn more.
>
>
>
> --------------------------------------------------------------------------
>
> Live connected with Hotmail on your phone. [2]Learn more.
>
>
>
> References
>
> Visible links
> 1. http://go.microsoft.com/?linkid=9708117
> 2. http://go.microsoft.com/?linkid=9708117
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home