[Xen-users] RE: [Xen-devel] Flashing SLOF on IBM JS20 (Thamesblue supercomputer)

[Dan Magenheimer <dan.magenheimer@xxxxxxxxxx>]

Hi Ahmad –

I could be wrong but I suspect the number of people on either xen-users or xen-devel that are using Xen on IBM Power (or are even familiar with Xen  on IBM Power) is a very small number, possibly even zero.  As far as I know, the XenPPC port was never fully functional and development stopped in 2007.  Your best bet might be to work through your IBM hardware support contacts to see if anyone in IBM is willing to help.  Or possibly there are other system-software-related IBM Power mailing lists that could help more effectively.

 

From: Ahmad Hassan [mailto:ahmad.hassan@xxxxxxxxx]
Sent: Tuesday, February 09, 2010 10:02 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx; Xen-Devel (E-mail)
Subject: [Xen-devel] Flashing SLOF on IBM JS20 (Thamesblue supercomputer)

 

Hi,

We are trying to set up XEN testbed on Thamesblue Supercomputer which has IBM JS20 Blades. I compiled the SLOF firmware from the source on one of the blade. The compilation went smooth and generated the following binaries

boot_rom.bin
boot_rom_bimini.bin

When we try to flash boot_rom.bin firmware binary then we get the following error:

update_flash: RTAS: validate() Invalid candidate image for this platform

whereas if we try to flash the original IBM firmware then it install smoothly as shown below:

update_flash -f /etc/microcode/ibm_fw_bios_

fw08401160_anyos_ppc64.img
info: Temporary side will be updated with a newer or
identical image

Projected Flash Update Results:
Current T Image: 2b606_470
Current P Image: 2b405_131
New T Image:     2b608_401
New P Image:     2b405_131
Flash image ready...rebooting the system ...


I used the following procedure to compile the slof-JX-1.4.0-0 on IBM JS20 blade

$ tar xzf slof-JX-1.4.0-0.tar.gz
$ tar xzf slof-JX-1.4.0-0-oco-gcc412.tar.gz
$ cd  slof-JX-1.4.0-0-oco-gcc412

$ chmod 777 install-oco.sh
$ $ ./install-oco.sh ../slof-JX-1.4.0-0

$ cd ../slof-JX-1.4.0-0
$ export CROSS="" # native compiler

c06b11:/home/ah/firmware/slof-JX-1.4.0-0 # make -s
******** Building js2x system ********
 ====== Building slof ======
 ====== Building rtas ======
 ====== Building clients ======
 ====== Building boot_rom_js2x.bin ======
 ====== Building boot_rom_bimini.bin ======

Please help.

Thanks.

Best Regards, Hassan

 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users