WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] [XCP] questions

On Thu, Jan 21, 2010 at 09:46:27AM -0500, James Pifer wrote:
> On Thu, 2010-01-21 at 09:56 +0200, Pasi Kärkkäinen wrote:
> > lspci -vvv
> 
> ???Pasi,
> 
> Here's the output in relation to the iLo.
> 

Hmm.. The 01:04.0 device seems to have an I/O port, and the last one is called 
UART.
So I'm wondering which one of those it is..

What does "dmesg | grep -i ttys" say in dom0? Does it detect a serial port? 

What's the model of your server?

"Integrated Lights-Out Virtual Serial Port configuration and operation HOWTO, 
4th edition":
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00263709/c00263709.pdf

"HP Integrated Lights-Out 2 User Guide":
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00553302/c00553302.pdf

-- Pasi

> Thanks,
> James
> 
> 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out 
> Controller (rev 03)
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Interrupt: pin A routed to IRQ 21
>       Region 0: I/O ports at 2800 [size=256]
>       Region 1: Memory at f5fe0000 (32-bit, non-prefetchable) [size=512]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: hpwdt
>       Kernel modules: hpwdt
> 
> 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  
> Processor (rev 03)
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin B routed to IRQ 22
>       BIST result: 00
>       Region 0: I/O ports at 3400 [size=256]
>       Region 1: Memory at f5fd0000 (32-bit, non-prefetchable) [size=2K]
>       Region 2: Memory at f5fc0000 (32-bit, non-prefetchable) [size=16K]
>       Region 3: Memory at f5f00000 (32-bit, non-prefetchable) [size=512K]
>       [virtual] Expansion ROM at f5e20000 [disabled] [size=64K]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: hpilo
>       Kernel modules: hpilo
> 
> 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB 
> controller (prog-if 00 [UHCI])
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64
>       Interrupt: pin B routed to IRQ 22
>       Region 4: I/O ports at 3800 [size=32]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: uhci_hcd
>       Kernel modules: uhci-hcd
> 
> 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual 
> UART (prog-if 01)
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Interrupt: pin A routed to IRQ 21
>       Region 0: Memory at f5ef0000 (32-bit, non-prefetchable) [size=256]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: ipmi_si
>       Kernel modules: ipmi_si
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>