WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] XenClient boot error on ThinkPad X200

To: <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] XenClient boot error on ThinkPad X200
From: "Kobayashi Takanori" <kb-taka@xxxxxxxxxx>
Date: Tue, 26 May 2009 23:15:58 +0900
Delivery-date: Tue, 26 May 2009 07:32:05 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx

Hello

I could run XenClient(Dom0) on Dell OPTIPLEX 755.
After that, I trying to it on a laptop pc(ThinkPad X200).

But When booted on ThinkPad X200, I got a error below.

1.PC is started.
2.Grub menu appears, and select "XenClient".
3.Nothing booted.
 In Black Screen, Only a cursor is blinking
 on the left,top of the screen.

4.For that, I rebooted a pc.
5.Grub menu appears again, and select "> Maintenance" menu,
 and select "XenClient - Full console output" memu.
6.Then, the following messages appear on the screen.


-----------------------------------------------------------------
- - - - - -
- - - - - -
- - - - - -
(xen) ENtal of 2processors activated.
(xen) ENABLE IO-APIC IRQs
(xen)  -> Using new ACK method
(xen) checking TSC synchronization acros 2 CPUs: passed.
(xen) Platform timer is 14.318MHz HPET
(xen) Brouht up 2 CPUs
(xen) I/O virtuallisation enabled
(xen) I/O virtuallisation for PV guests disabled
(xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff57000
(xen) [VT-D]iommu.c:742: iommu_fault_status: Fault Overflow
(xen) [VT-D]iommu.c:727: iommu_fault:DMA Write: 0:2.0 addr ffff0000 REASON 5 iommu->reg = ffff838bfff57000
(xen) print_vtd_entries: iommu = ffff8300bc2bddf0 bdf = 0:2:0 gmfn = ffff0
(xen) root_entry = ffff83013bdef000
(xen) root_rntry[0] = 1376c0001
(xen) context = ffff8301276c0000
(xen) 13 = ffff83013bde9000
(xen) 13_index = 3
(xen) 13[3] = 1376aa003
(xen) 12 = ffff8301376aa000
(xen) 12_index = 1ff
(xen) 12[1ff] = 0
(xen) 12[1ff] not present
(xen) [VT-D]iommu.c:773: iommu_page_fault: iommu->reg = ffff838bfff55000
-----------------------------------------------------------------


I would like to learn what caused this error.
And, Is there a person who could run XenClient on X200 or other ThinkPad series?

Thanks.


===DATA===
My environment is described in the following.
-----------------------------------------------------------------
Getting Source Date: 2009/05/21
PC:lenove ThinkPad X200(Core 2 Duo 2.66GHz x 2, 4GB memory.)
OS:
/dev/sda1 WindowsXP for VM
/dev/sda2 Fedora 10 For Build XenClient
/dev/sda3 For XenClient partition

Operation: I tried according to the HOWTO of Git repository (manual install)
http://xenbits.xensource.com/gitweb?p=xenclient/build.git;a=tree
-----------------------------------------------------------------

Regards,
---------
Taka <kb-taka@xxxxxxxxxx>




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>