| Thanks a lot again for your reply. 
 > tap:aio should be for file-backed images, not devices. You should have
 > disk = [ "tap:aio:/PathToMyImage.img,hda,w", "phy:/dev/sda1,xvdb,w" ]
 
 I followed this procedure, where says that tap:aio should be used (isn't it rigth?):
 http://www.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/5.2/html/Para-Virtualized_Windows_Drivers/sect-Para-Virtualized_Windows_Drivers-Installing_and_configuring_the_para_virtualized_drivers-Post_installation_host_configuration.html
 
 >How many disks you have each? Do you have one or two QEMU disks?
 >QEMU harddisk should be hda, while RHEL disk should be xvdb.
 
 With this configuration I saw three devices:
 disk = [ "file:PathToMyImage.img,hda,w", "tap:aio:/dev/sda1,xvdb,w" ]
 
 The devices are:
 
 1) "c:" (10GB)
 2) "QEMU HARDDISK" (50GB)
 3) "RHEL DISK SCSI Disk Device" (50GB)
 
 The only difference between 2) and 3) are in their Properties:
 2) says "Location: Location 1 (1)"
 3) says "Location: Bus Number 0, Target Id 0, LUN 1"
 
 So I'm not sure if I should put my data in 2) or 3).
 
 Thanks for your time.
 
 Regards.
 
 
 On Tue, May 19, 2009 at 10:36 PM, Fajar A. Nugraha <fajar@xxxxxxxxx>  wrote: 
but you ARE using Redhat's PV driver?On Wed, May 20, 2009 at 4:16 AM, Alba <florfoto@xxxxxxxxx > wrote: 
> Thanks Fajar for your reply. 
> I'm not using Redhat PV drivers on boot disk.
 tap:aio should be for file-backed images, not devices. You should have>
 > My DomU config file is:
 >
 > disk = [ "file:PathToMyImage.img,hda,w", "tap:aio:/dev/sda1,xvdb,w" ]
 >
 
 
 
 disk = [ "tap:aio:/PathToMyImage.img,hda,w", "phy:/dev/sda1,xvdb,w" ]
 
 How many disks you have each? Do you have one or two QEMU disks?
 > I'm not sure which disk should I use in the Win DomU: if the one that says
 > "QEMU HARDDISK"  or the one that says "RHEL DISK SCSI Disk Device".
 
 
 QEMU harddisk should be hda, while RHEL disk should be xvdb.
 
 --
 Fajar
 
 _______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users |