| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Help me to set up network (routes)
Fajar A. Nugraha wrote:
Can you elaborate why you don't want to use bridging?
IMHO it's easier to setup, and you can still use dom0 as router. For
example, libvirt on RHEL create a NAT network for domU,
192.168.122.0/24, with 192.168.122.1 located on dom0's virbr.
So, my ISP giving my address 10.9.3.92/24. When I'm using bridging, for
every DomU I must assign address from my ISP's network (10.9.3.0/24),
for example 10.9.3.93. In that configuration everything works, I can
ping IPS's LAN and Dom0 (10.9.3.92).
But, my IPS give me just ONE IP - 10.9.3.92. I can't use any other
address. I'm afraid that my configuration will invoke an "IP address
conflict". And, in either case, if I would like to connect to 10.9.3.93
from my Dom0? Where it will connect? to DomU or to real user of my ISP?
So, after 2 days of bridging magic, I decide to drop that idea and now
looking for another solution.
Early, I have used Qemu and there was that configuration for net: tap0
is up and then some masquerading with iptables. Everything works. But, I
can't adapt this solution to Xen (yet?).
That is ;-)
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home