Hello! have a problem using 2 PV domu with tap:aio disk image file
I install Suse 11.1 x 64 as PV Domu on Suse x64 Dom0
the running config for DomU is
bootloader = '/usr/bin/pygrub'
builder="linux".
extra
=
'xencons
=tty'.............................................................
on_poweroff
='destroy'...........................................................
on_reboot
='restart'.............................................................
on_crash
='restart'..............................................................
on_xend_start='start'
on_xend_stop='shutdown'.
...........................................................
name = "Suse1"
#uuid = ''
memory=512
vcpus = 1
vif = ['bridge=br0,vifname=susedl0']
disk = ['tap:aio:/etc/xen/images/suse1.img,xvda,w']
everything works great,
than i clone config and image files for second PV DomU. its config is:
bootloader = '/usr/bin/pygrub'
builder="linux".
extra
=
'xencons
=tty'.............................................................
on_poweroff
='destroy'...........................................................
on_reboot
='restart'.............................................................
on_crash
='restart'..............................................................
on_xend_start='start'
on_xend_stop='shutdown'.
...........................................................
name = "Suse2"
#uuid = ''
memory=512
vcpus = 1
vif = ['bridge=br0,vifname=suse20']
disk = ['tap:aio:/etc/xen/images/susedl.img,xvda,w']
and it also works great but when first domu is stoped
if i try run both domu in same time one of them doesnot boot, xm
conslole give me this
XENBUS: Waiting for devices to initialise: 295s...290s...285s... etc
XENBUS: Timeout connecting to device: device/vbd/51712 (local state 3,
remote state 2)
XENBUS: Device not ready: device/vbd/51712
FATAL: Error inserting processor (/lib/modules/2.6.27.7-9-xen/kernel/
drivers/acpi/processor.ko): No such device
WARNING: Error inserting processor (/lib/modules/2.6.27.7-9-xen/kernel/
drivers/acpi/processor.ko): No such device
thermal: Unknown symbol acpi_processor_set_thermal_limit
FATAL: Error inserting thermal (/lib/modules/2.6.27.7-9-xen/kernel/
drivers/acpi/thermal.ko): Unknown symbol in module, or unknown
parameter (see dmesg)
FATAL: Error inserting fan (/lib/modules/2.6.27.7-9-xen/kernel/drivers/
acpi/fan.ko): No such device
netfront: Initialising virtual ethernet driver.
Creating device nodes with udev
udevd version 128 started
Boot logging started on /dev/tty1(/dev/console) at Mon Mar 2 21:00:54
2009
Trying manual resume from /dev/xvda5
Trying manual resume from /dev/xvda5
Waiting for device /dev/xvda1 to
appear: ..............................Could not find /dev/xvda1.
Want me to fall back to /dev/xvda1? (Y/n)
y
Waiting for device /dev/xvda1 to
appear: ..............................not found -- exiting to /bin/sh
$
and when I try to reset or shutdown Suse2 Dom0 hold for 1 min and than
I cant create any PV domains
if i change tap:aio in config files to file: both PV works in same time
Where is my mistake?
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home