This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
Home Products Support Community News


[Xen-users] GPLPV on opensolaris, another try

To: James Harper <james.harper@xxxxxxxxxxxxxxxx>, Xen Users <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] GPLPV on opensolaris, another try
From: "Fajar A. Nugraha" <fajar@xxxxxxxxx>
Date: Fri, 6 Feb 2009 17:56:04 +0700
Delivery-date: Fri, 06 Feb 2009 02:56:49 -0800
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Hi James,

I've just updated my Opensolaris installation to the latest build
available (snv_106), and want to test GPLPV on it again. David
Edmondson from Sun also has expressed his interest in helping to get
GPLPV working on Opensolaris dom0


So here goes. As it stands right now :
- driver installation is succesful
- boot with /NOGPLV both disk and network works correctly.
- boot WITHOUT /NOGPLV disk driver works correctly. Network icon shows
connected, but no traffic is getting through.

Here's what I get from tcpdump on dom0 during a ping test from domU

# tcpdump -n -i bnx0 src or dst
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on bnx0, link-type EN10MB (Ethernet), capture size 96 bytes
17:28:43.080609 arp who-has tell
17:28:43.081106 arp reply is-at 00:16:3e:df:d5:c0
17:28:48.480171 arp who-has tell
17:28:48.480607 arp reply is-at 00:16:3e:df:d5:c0 is domU's ip address, is the router, bnx0
is physical interface on dom0. Both arp request and reply passes
through dom0 just fine, but it seems that domU isn't getting the arp

Any ideas on how to get this working?



Xen-users mailing list