I have Xen 3.2 with ubuntu-hardy as dom0 and domU.
domU and dom0 are able to ping each other. While dom0 is able to access external network, domU fails to do so.
This is my configuration file for domU:
************************************************8
kernel = '/boot/vmlinuz-2.6.24-19-xen'
ramdisk = '/boot/initrd.img-2.6.24-19-xen'
memory = '128'
root = '/dev/hda2 ro'
disk = [
'tap:aio:/home/xen/domains/
xen1.hardy.com/swap.img,hda1,w',
'tap:aio:/home/xen/domains/
xen1.hardy.com/disk.img,hda2,w',
]
name = '
xen1.hardy.com'
dhcp = 'dhcp'
vif = [ 'mac=00:16:3E:7E:85:8A' ]
>on_reboot = 'restart'
on_crash = 'restart'
extra = '2 console=xvc0'
*******************************************
This is the result of ifconfig on domU:
*******************************************
eth0 Link encap:Ethernet HWaddr 00:16:3e:7e:85:8a
inet addr:
123.237.221.140 Bcast:
123.237.223.255 Mask:
255.255.248.0 inet6 addr: 2002:7bed:dd03:4:216:3eff:fe7e:858a/64 Scope:Global
inet6 addr: 2002:7bed:d99f:4:216:3eff:fe7e:858a/64 Scope:Global
inet6 addr: fec0::4:216:3eff:fe7e:858a/64 Scope:Site
inet6 addr: fec0::9:216:3eff:fe7e:858a/64 Scope:Site
inet6 addr: 2002:7bed:dbc8:9:216:3eff:fe7e:858a/64 Scope:Global
inet6 addr: fe80::216:3eff:fe7e:858a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:153833 errors:0 dropped:0 overruns:0 frame:0
TX packets:339 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:44702020 (42.6 MB) TX bytes:41663 (40.6 KB)
lo Link encap:Local Loopback
inet addr:
127.0.0.1 Mask:
255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:936 (936.0 B) TX bytes:936 (936.0 B)
*******************************************
This is result of ifconfig on dom0:
*******************************************
eth0 Link encap:Ethernet HWaddr 00:17:08:2e:f0:38
inet addr:
123.237.218.27 Bcast:
123.237.223.255 Mask:
255.255.248.0
inet6 addr: 2002:7bed:dd03:4:217:8ff:fe2e:f038/64 Scope:Global
inet6 addr: 2002:7bed:d99f:4:217:8ff:fe2e:f038/64 Scope:Global
inet6 addr: fec0::4:217:8ff:fe2e:f038/64 Scope:Site
inet6 addr: fec0::9:217:8ff:fe2e:f038/64 Scope:Site
inet6 addr: 2002:7bed:dbc8:9:217:8ff:fe2e:f038/64 Scope:Global
inet6 addr: fe80::217:8ff:fe2e:f038/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:100339 errors:0 dropped:0 overruns:0 frame:0
TX packets:6026 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:13079829 (12.4 MB) TX bytes:1102556 (1.0 MB)
lo Link encap:Local Loopback
inet addr:
127.0.0.1 Mask:
255.0.0.0 inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:88 errors:0 dropped:0 overruns:0 frame:0
TX packets:88 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4400 (4.2 KB) TX bytes:4400 (4.2 KB)
peth0 Link encap:Ethernet HWaddr 00:17:08:2e:f0:38
inet6 addr: fe80::217:8ff:fe2e:f038/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:180678 errors:0 dropped:0 overruns:0 frame:0
TX packets:5976 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:57972238 (55.2 MB) TX bytes:1117217 (1.0 MB)
Interrupt:16
vif1.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:341 errors:0 dropped:0 overruns:0 frame:0
TX packets:156172 errors:0 dropped:466 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:36973 (36.1 KB) TX bytes:45273041 (43.1 MB)
*******************************************
'brctl show' displays:
bridge name bridge id STP enabled interfaces
eth0 8000.0017082ef038 no peth0
vif1.0
Should the MAC address of eth0 in domU and dom0 be same?
Do I need to make any changes in configuration file?
Thanks,
Ashutosh