|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] How to export an Intel USB-Controller to DomU / Driver tried
Hey List!
I'm using Fedora 8 (since Fedora 9 doesn't support Dom0-mode), and i'm really
stuck. I want to export an Intel ICH7-USB-Controller to a DomU to attach some
devices.
When I want to export the device i go this way:
rmmod uhci_hcd
rmmod ohci_hcd
rmmod ehci_hcd
modprobe pciback
echo -n 0000:00:1d.0 > /sys/bus/pci/drivers/pciback/new_slot
echo -n 0000:00:1d.0 > /sys/bus/pci/drivers/pciback/bind
echo -n 0000:00:1d.7 > /sys/bus/pci/drivers/pciback/new_slot
echo -n 0000:00:1d.7 > /sys/bus/pci/drivers/pciback/bind
as lspci says the following:
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
Then I fire up the dom0 with
pci = ['00:1d.0','00:1d.7'] in the config file
Then I check dmesg, which says:
pciback 0000:00:1d.0: Driver tried to write to a read-only configuration space
field at offset 0xc0, size 2. This may be harmless, but if you have problems
with your device:
1) see permissive attribute in sysfs
2) report problems to the xen-devel mailing list along with details of your
device obtained from lspci.
I've tried to do before fireing up the domU
echo -n 0000:00:1d.0 > /sys/bus/pci/drivers/pciback/permissive
echo -n 0000:00:1d.7 > /sys/bus/pci/drivers/pciback/permissive
Then i fired up the domU and then the whole system got stuck, no chance to see
any messages
So what can I do to get USB working in the domU? Isn't it possible, to reserve
a config space for the driver anywhere?
IDs are:
0000:00:1d.0 => Vendor: 0x8086, Device: 0x27c8
0000:00:1d.7 => Vendor: 0x8086, Device: 0x27cc
Many Thanks!!!
__________________________________________________
Do You Yahoo!?
Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz gegen
Massenmails.
http://mail.yahoo.com
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Xen-users] How to export an Intel USB-Controller to DomU / Driver tried to write to a read-only configuration space,
Franz Von Hahn <=
|
|
|
|
|