Re: [Xen-users] eth0 -> Dom0, eth0:1 -> DomU1 (bridged) and eth0:0 -> DomU2..N (Nat)

[Yves-Gaël Chény <yves@xxxxxxxxxxxxxx>]

Hi,
you can use a custom script inside the /etc/xen/scripts/network-bridge.

Example here : 
http://www.antredugeek.fr/wiki/wiki/bridge%20shorewall%20et%20xen
(sorry it's in french ;)  )

You choose the bridge you use into your vif line of your domU 
configuration :
for example :
vif = [ 'mac=00:16:3e:FF:FE:01, bridge=xenbr0' ]

hope it helps

regards
yves

Jock Coats a écrit :
> Well, after poring over many examples and my two Xen books I managed 
> to get NAT working across all my DomUs.
> However, I need one of the DomUs to be bridged so it has a public IP 
> address.
> I can't seem to get network-multinet to work on my Debian Etch setup.  
> Can someone help?  My holidays are coming to an end and I haven't got 
> the basics set up yet to be able to install software on my DomUs let 
> alone actually do some work, so I'm getting increasingly desperate - 
> on the verge of self harming I think!  It shouldn't be this difficult 
> so I can only assume it is my bad!
> Can I create a custom network script that will create one bridge and 
> one NAT router and if so, how do I connect them to the correct DomUs?
> Jock
>
>
> --
> Jock Coats
> Warden's Flat 1e, J Block Morrell Hall, OXFORD, OX3 0FF
> local rate: 084 JOCKOXFD (56256933) skype:jock.coats?call
> jock.coats@xxxxxxxxxxxxxxxxx http://jockcoats.org.uk
>
>
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
--
------------------------------------
|Yves-Gaël Chény...................|
|email.:.yves@xxxxxxxxxxxxxxxxxxxxx|
|site.:.www.antredugeek.fr.........|
------------------------------------ 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users