On Thu, Aug 21, 2008 at 7:43 PM, Mark Williamson
<mark.williamson@xxxxxxxxxxxx> wrote:
> Hi there,
>
> Did you reboot successfully into Xen / XenLinux before trying to start your
> guest? Does xm list give you sensible output?
>
> Is there anything interesting in /var/log/xen/xend.log?
looking for help on the web, I found a message saying that the disk
image should have 755 mode; after chmod the image the OSError problem
fixed, but ...
Now, I've added acpi=1 and apic=1 to winxp.cfg and the install process
started ok. After first mandatory winxp installer reboot, and when the
installer should start from hd (not from cdrom) the windows blanks
and never return. xm dmesg shows the following
(XEN) (GUEST: 33) HVM Loader
(XEN) (GUEST: 33) Detected Xen v3.0.3-1
(XEN) (GUEST: 33) Writing SMBIOS tables ...
(XEN) (GUEST: 33) Loading ROMBIOS ...
(XEN) (GUEST: 33) Creating MP tables ...
(XEN) (GUEST: 33) Loading Cirrus VGABIOS ...
(XEN) (GUEST: 33) Loading ACPI ...
(XEN) (GUEST: 33) SVM go ...
(XEN) (GUEST: 33) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) (GUEST: 33) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
vruppert Exp $
(XEN) (GUEST: 33) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
2005/05/07 15:55:26 $
(XEN) (GUEST: 33)
(XEN) (GUEST: 33) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
(XEN) (GUEST: 33) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (4096 MBytes)
(XEN) (GUEST: 33) ata0 slave: Unknown device
(XEN) (GUEST: 33) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
(XEN) (GUEST: 33) ata1 slave: Unknown device
(XEN) (GUEST: 33)
(XEN) (GUEST: 33) Booting from CD-Rom...
(XEN) (GUEST: 33) unsupported PCI BIOS function 0x0E
(XEN) (GUEST: 33) int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) (GUEST: 33) *** int 15h function AX=E980, BX=00F2 not yet supported!
(XEN) hvm_vioapic_write_indirect: version register read only
(XEN) hvm_vioapic_write_indirect: version register read only
(XEN) hvm_vioapic_write_indirect: version register read only
(XEN) This hvm_vlapic is for P4, no work for De-assert init
If I change acpi=1 to acpi=0 in config file, the last 5 lines of dmesg
disappear, but the problem continues.
Any help would be appreciated to fix this problem,
regards,
--
edu
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home