| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: [Xen-users] Question on default xen network configs
Does xenbr0 no longer get displayed? It doesn't show up.
Thanks
> -----Original Message-----
> From: Asim [mailto:linkasim@xxxxxxxxx]
> Sent: Wednesday, August 20, 2008 2:16 PM
> To: Phil Winterfield (winterfi)
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-users] Question on default xen network configs
>
> The vifs will show up when you boot a domU.
>
> -Asim
>
> On 8/20/08, Phil Winterfield (winterfi) <winterfi@xxxxxxxxx> wrote:
> > I have read through the wiki pages and other docs on what happens
with
> > xen network startup (split driver model) and it seems clear enough,
but
> > I am finding that the default configurations aren't showing the
xenbr0
> > and vif's. According to what I have read, this should be done by
> > default when '(network-script network-bridge)' is excuted in the
xend
> > startup script. The ifconfig is shown below. Are there other steps
> > that are needed to get this default config to show up?
> >
> >
> >
> > Thanks,
> >
> > Phil
> >
> >
> >
> > [root@localhost ios]# ifconfig
> >
> > eth0 Link encap:Ethernet HWaddr 00:15:17:46:EF:CA
> >
> > inet addr:192.168.102.94 Bcast:192.168.102.95
> > Mask:255.255.255.224
> >
> > inet6 addr: fe80::215:17ff:fe46:efca/64 Scope:Link
> >
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> >
> > RX packets:715 errors:0 dropped:0 overruns:0 frame:0
> >
> > TX packets:347 errors:0 dropped:0 overruns:0 carrier:0
> >
> > collisions:0 txqueuelen:0
> >
> > RX bytes:92461 (90.2 KiB) TX bytes:56883 (55.5 KiB)
> >
> >
> >
> > eth1 Link encap:Ethernet HWaddr 00:15:17:46:EF:CB
> >
> > inet addr:192.168.102.71 Bcast:192.168.102.95
> > Mask:255.255.255.224
> >
> > inet6 addr: fe80::215:17ff:fe46:efcb/64 Scope:Link
> >
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> >
> > RX packets:30 errors:0 dropped:0 overruns:0 frame:0
> >
> > TX packets:33 errors:0 dropped:0 overruns:0 carrier:0
> >
> > collisions:0 txqueuelen:0
> >
> > RX bytes:10710 (10.4 KiB) TX bytes:8079 (7.8 KiB)
> >
> >
> >
> > lo Link encap:Local Loopback
> >
> > inet addr:127.0.0.1 Mask:255.0.0.0
> >
> > inet6 addr: ::1/128 Scope:Host
> >
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> >
> > RX packets:12 errors:0 dropped:0 overruns:0 frame:0
> >
> > TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
> >
> > collisions:0 txqueuelen:0
> >
> > RX bytes:964 (964.0 b) TX bytes:964 (964.0 b)
> >
> >
> >
> > peth0 Link encap:Ethernet HWaddr 00:15:17:46:EF:CA
> >
> > inet6 addr: fe80::215:17ff:fe46:efca/64 Scope:Link
> >
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> >
> > RX packets:1358 errors:0 dropped:0 overruns:0 frame:0
> >
> > TX packets:424 errors:0 dropped:0 overruns:0 carrier:0
> >
> > collisions:0 txqueuelen:100
> >
> > RX bytes:154616 (150.9 KiB) TX bytes:72105 (70.4 KiB)
> >
> > Base address:0x2020 Memory:98820000-98840000
> >
> >
> >
> > peth1 Link encap:Ethernet HWaddr 00:15:17:46:EF:CB
> >
> > inet6 addr: fe80::215:17ff:fe46:efcb/64 Scope:Link
> >
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> >
> > RX packets:498 errors:0 dropped:0 overruns:0 frame:0
> >
> > TX packets:302 errors:0 dropped:0 overruns:0 carrier:0
> >
> > collisions:0 txqueuelen:100
> >
> > RX bytes:95790 (93.5 KiB) TX bytes:48500 (47.3 KiB)
> >
> > Base address:0x2000 Memory:98800000-98820000
> >
> >
> >
> > [root@localhost ios]# brctl show
> >
> > bridge name bridge id STP enabled interfaces
> >
> > eth0 8000.00151746efca no peth0
> >
> > eth1 8000.00151746efcb no peth1
> >
> >
> >
> >
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home