Re: [Xen-users] Finally got CentOS installed as domU onSLES10SP2dom0, but....

[James Pifer <jep@xxxxxxxxxxxxxxxx>]

On Sat, 2008-08-02 at 16:52 -0600, Nick Couchman wrote:
> As far as I know it should work on SLES10SP1, yes.  When you
> transferred it to the SLES10SP1 machine, did the path to the disk file
> change and did you make sure to change it the config file?
> 

Yes, and it actually tries to boot, I just get the exact same error as
before:
 # xm create server04;xm console server04
Using config file "./server04".
Started domain server04
Bootdata ok (command line is TERM=xterm )
Linux version 2.6.18-92.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc
version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Jun 10 19:20:18
EDT 2008
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 00000000c0800000 (usable)
No mptable found.
Built 1 zonelists.  Total pages: 788480
Kernel command line: TERM=xterm 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2666.760 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB disabled
Memory: 3072512k/3153920k available (2414k kernel code, 72548k reserved,
1349k data, 176k init)
Calibrating delay using timer specific routine.. 6273.92 BogoMIPS
(lpj=12547845)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 10317A0 could
not acquire Mutex [2] [20060707]
No dock devices found.
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 10317A0 could
not acquire Mutex [2] [20060707]
Initializing CPU#1
migration_cost=5823
Initializing CPU#2
migration_cost=5823
Initializing CPU#3
migration_cost=5823
Brought up 4 CPUs
PCI: Fatal: No PCI config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1217715664.034:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 52394A11B61A91
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Console: switching to colour frame buffer device 100x37
input: Xen Virtual Keyboard/Mouse as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Write protecting the kernel read-only data: 461k
USB Universal Host Controller Interface driver v3.0
Registering block device major 202
 xvda: xvda1 xvda2 xvda3
Kernel panic - not syncing: Attempted to kill init!

I've tried changing the root device to all three of the above (on my SP2
server it was xvda3, so I assume it would be the same).

Thanks,
James

James



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users