You have to modify the /tools/firmware/rombios/rombios.c
I did some work on this based on some patches found on xen-devel.
I'll attach a patch to rombios.c and a hvmloader build on 3.2.0 with
rombios patches applied.
Please don't look too close at this patch as this was my first try
with bios routines... ;)
Cheers,
Stephan
Nick Anderson schrieb:
Does anyone know how to change the bios timeout for qemu when dealing
with HVMs? Sometimes getting connected with vnc takes a bit, It would be
nice to have a bit more time.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
--
Stephan Seitz
Senior System Administrator
*netz-haut* e.K.
multimediale kommunikation
zweierweg 22
97074 würzburg
fon: +49 931 2876247
fax: +49 931 2876248
web: www.netz-haut.de <http://www.netz-haut.de/>
registriergericht: amtsgericht würzburg, hra 5054
--- xen-3.2-3.2.0/tools/firmware/rombios/rombios.c 2008-01-17
00:21:33.000000000 +0100
+++ xen-3.2-3.2.0.new/tools/firmware/rombios/rombios.c 2008-01-21
10:11:11.404418186 +0100
@@ -858,8 +858,6 @@ typedef struct {
flags_t flags;
} iret_addr_t;
-
-
static Bit8u inb();
static Bit8u inb_cmos();
static void outb();
@@ -959,6 +957,27 @@ static char CVSID[] = "$Id: rombios.c,v
/* Offset to skip the CVS $Id: prefix */
#define bios_version_string (CVSID + 4)
+#define SC_BLACK 0
+#define SC_BLUE 1
+#define SC_GREEN 2
+#define SC_CYAN 3
+#define SC_RED 4
+#define SC_MAGENTA 5
+#define SC_BROWN 6
+#define SC_LIGHTGRAY 7
+#define SC_DARKGRAY 8
+#define SC_LIGHTBLUE 9
+#define SC_LIGHTGREEN 10
+#define SC_LIGHTCYAN 11
+#define SC_LIGHTRED 12
+#define SC_LIGHTMAGENTA 13
+#define SC_YELLOW 14
+#define SC_WHITE 15
+
+Bit8u bios_textcolor = 15; //SC_LIGHTGRAY;
+Bit8u bios_backgroundcolor = 0; //SC_BLACK;
+
+
#define BIOS_PRINTF_HALT 1
#define BIOS_PRINTF_SCREEN 2
#define BIOS_PRINTF_INFO 4
@@ -1529,7 +1548,50 @@ wrch(c)
pop bp
ASM_END
}
-
+
+ void
+_wrchs(c,cg)
+ Bit8u c;
+ Bit8u cg;
+{
+ ASM_START
+ push bp
+ mov bp, sp
+
+ push bx
+ push cx
+
+ mov ah, #0x09 ;; write character at cursor position
+ mov al, 4[bp] ;; the character
+ mov bx, 6[bp] ;; 0001 blue and 1110 yellow
+ mov bh, #0x00 ;; bh is the page number and left alone by now
+ mov cx, #0x01 ;; number of characters
+ int #0x10
+
+ pop cx
+ pop bx
+
+ pop bp
+ ASM_END
+}
+
+// mov bh, #0x00 ;; page
+// mov ah, #0x03 ;; get cursor position dh row dl column
+// int #0x10
+// add dl, #0x01 ;; increase column
+// mov ah, #0x02 ;; set cursor position
+// int #0x10
+
+void wrchs(c,fg,bg)
+ Bit8u fg;
+ Bit8u bg;
+{
+ Bit8u cg;
+ cg = (bg<<4)+fg;
+ _wrchs(c,cg); // screen output with color, character is overwritten by
typewriter
+ wrch(c); // typewriter (colored if on screen, otherwise simple
+}
+
void
send(action, c)
Bit16u action;
@@ -1547,8 +1609,13 @@ send(action, c)
if (action & BIOS_PRINTF_INFO) outb(INFO_PORT, c);
#endif
if (action & BIOS_PRINTF_SCREEN) {
- if (c == '\n') wrch('\r');
- wrch(c);
+ if (c == '\n') {
+ wrch('\r');
+ wrch(c);
+ }
+ else {
+ wrchs(c, bios_textcolor, bios_backgroundcolor);
+ }
}
}
@@ -1585,6 +1652,24 @@ put_uint(action, val, width, neg)
send(action, val - (nval * 10) + '0');
}
+ void
+put_luint(action, val, width, neg)
+ Bit16u action;
+ unsigned long val;
+ short width;
+ bx_bool neg;
+{
+ unsigned long nval = val / 10;
+ if (nval)
+ put_luint(action, nval, width - 1, neg);
+ else {
+ while (--width > 0) send(action, ' ');
+ if (neg) send(action, '-');
+ }
+ send(action, val - (nval * 10) + '0');
+}
+
+
//--------------------------------------------------------------------------
// bios_printf()
// A compact variable argument printf function which prints its output via
@@ -1603,7 +1688,7 @@ bios_printf(action, s)
bx_bool in_format;
short i;
Bit16u *arg_ptr;
- Bit16u arg_seg, arg, nibble, shift_count, format_width;
+ Bit16u arg_seg, arg, nibble, hibyte, shift_count, format_width, hexadd;
arg_ptr = &s;
arg_seg = get_SS();
@@ -1630,17 +1715,49 @@ bios_printf(action, s)
else {
arg_ptr++; // increment to next arg
arg = read_word(arg_seg, arg_ptr);
- if (c == 'x') {
+ if (c == 'x' || c == 'X') {
if (format_width == 0)
format_width = 4;
+ if (c == 'x')
+ hexadd = 'a';
+ else
+ hexadd = 'A';
for (i=format_width-1; i>=0; i--) {
nibble = (arg >> (4 * i)) & 0x000f;
- send (action, (nibble<=9)? (nibble+'0') : (nibble-10+'A'));
+ send (action, (nibble<=9)? (nibble+'0') : (nibble-10+hexadd));
}
}
else if (c == 'u') {
put_uint(action, arg, format_width, 0);
}
+ else if (c == 'l') {
+ s++;
+ c = read_byte(get_CS(), s); /* is it ld,lx,lu? */
+ arg_ptr++; /* increment to next arg */
+ hibyte = read_word(arg_seg, arg_ptr);
+ if (c == 'd') {
+ if (hibyte & 0x8000)
+ put_luint(action, 0L-(((Bit32u) hibyte << 16) | arg),
format_width-1, 1);
+ else
+ put_luint(action, ((Bit32u) hibyte << 16) | arg, format_width, 0);
+ }
+ else if (c == 'u') {
+ put_luint(action, ((Bit32u) hibyte << 16) | arg, format_width, 0);
+ }
+ else if (c == 'x' || c == 'X')
+ {
+ if (format_width == 0)
+ format_width = 8;
+ if (c == 'x')
+ hexadd = 'a';
+ else
+ hexadd = 'A';
+ for (i=format_width-1; i>=0; i--) {
+ nibble = ((((Bit32u) hibyte << 16) | arg) >> (4 * i)) & 0x000f;
+ send (action, (nibble<=9)? (nibble+'0') : (nibble-10+hexadd));
+ }
+ }
+ }
else if (c == 'd') {
if (arg & 0x8000)
put_int(action, -arg, format_width - 1, 1);
@@ -1893,6 +2010,8 @@ shutdown_status_panic(status)
void
print_bios_banner()
{
+ bios_textcolor=SC_WHITE;
+ bios_backgroundcolor=SC_BLACK;
printf(BX_APPNAME" BIOS, %d cpu%s, ", BX_SMP_PROCESSORS,
BX_SMP_PROCESSORS>1?"s":"");
printf("%s %s\n", bios_cvs_version_string, bios_date_string);
#if BX_TCGBIOS
@@ -1994,7 +2113,9 @@ print_boot_device(type)
/* NIC appears as type 0x80 */
if (type == 0x80 ) type = 0x4;
if (type == 0 || type > 0x4) BX_PANIC("Bad drive type\n");
- printf("Booting from %s...\n", drivetypes[type]);
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+ printf("\n\nBooting from %s...\n", drivetypes[type]);
}
//--------------------------------------------------------------------------
@@ -2007,6 +2128,8 @@ print_boot_failure(type, reason)
{
if (type == 0 || type > 0x3) BX_PANIC("Bad drive type\n");
+ bios_textcolor=SC_RED;
+ bios_backgroundcolor=SC_BLACK;
printf("Boot from %s failed", drivetypes[type]);
if (type < 4) {
/* Report the reason too */
@@ -2026,11 +2149,340 @@ print_boot_failure(type, reason)
print_cdromboot_failure( code )
Bit16u code;
{
+ bios_textcolor=SC_RED;
+ bios_backgroundcolor=SC_BLACK;
bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "CDROM boot failure code
: %04x\n",code);
return;
}
+
+#define WAIT_HZ 18
+/**
+ * Check for keystroke.
+ * @returns True if keystroke available, False if not.
+ */
+Bit8u check_for_keystroke()
+{
+ASM_START
+ mov ax, #0x100
+ int #0x16
+ jz no_key
+ mov al, #1
+ jmp done
+no_key:
+ xor al, al
+done:
+ASM_END
+}
+
+/**
+ * Get keystroke.
+ * @returns BIOS scan code.
+ */
+Bit8u get_keystroke()
+{
+ASM_START
+ mov ax, #0x0
+ int #0x16
+ xchg ah, al
+ASM_END
+}
+
+/**
+ * Waits (sleeps) for the given number of ticks.
+ * Checks for keystroke.
+ *
+ * @returns BIOS scan code if available, 0 if not.
+ * @param ticks Number of ticks to sleep.
+ * @param stop_on_key Whether to stop immediately upon keypress.
+ */
+Bit8u wait(ticks, stop_on_key)
+ Bit16u ticks;
+ Bit8u stop_on_key;
+{
+ long ticks_to_wait, delta;
+ Bit32u prev_ticks, t;
+ Bit8u scan_code = 0;
+
+ /*
+ * The 0:046c wraps around at 'midnight' according to a 18.2Hz clock.
+ * We also have to be careful about interrupt storms.
+ */
+ ticks_to_wait = ticks;
+ prev_ticks = read_dword(0x0, 0x46c);
+ do
+ {
+ t = read_dword(0x0, 0x46c);
+ if (t > prev_ticks)
+ {
+ delta = t - prev_ticks; /* The temp var is required or bcc
screws up. */
+ ticks_to_wait -= delta;
+ }
+ else if (t < prev_ticks)
+ ticks_to_wait -= t; /* wrapped */
+ prev_ticks = t;
+
+ if (check_for_keystroke())
+ {
+ scan_code = get_keystroke();
+ bios_printf(BIOS_PRINTF_DEBUG, "Key pressed: %x\n", scan_code);
+ if (stop_on_key)
+ return scan_code;
+ }
+ } while (ticks_to_wait > 0);
+ return scan_code;
+}
+
+void clearscreen() {
+ /* Hide cursor, clear screen and move cursor to starting position */
+ASM_START
+ push bx
+ push cx
+ push dx
+
+ mov ax, #0x100
+ mov cx, #0x1000
+ int #0x10
+
+ mov ax, #0x700
+ mov bh, #7
+ xor cx, cx
+ mov dx, #0x184f
+ int #0x10
+
+ mov ax, #0x200
+ xor bx, bx
+ xor dx, dx
+ int #0x10
+
+ pop dx
+ pop cx
+ pop bx
+ASM_END
+}
+
+void move_cursor(col,row)
+Bit8u col;
+Bit8u row;
+{
+ASM_START
+ push bp
+ mov bp, sp
+
+ push bx
+ mov ax, #0x200
+ xor bx,bx
+ mov dl, 4[bp]
+ mov dh, 6[bp]
+ int #0x10
+
+ pop bx
+ pop bp
+ASM_END
+}
+
+int bootmenu(selected)
+ int selected;
+{
+ Bit8u scode;
+ int max;
+ Bit8u screencol=21;
+ Bit8u screenrow=5;
+
+ /* get the number of boot devices */
+ max = read_word(IPL_SEG, IPL_COUNT_OFFSET);
+
+ bios_textcolor = SC_BLUE;
+ bios_backgroundcolor = SC_LIGHTGRAY;
+
+ for(;;) {
+ if (selected > max || selected < 1) selected = 1;
+ clearscreen();
+ bios_textcolor = SC_BLUE;
+ bios_backgroundcolor = SC_LIGHTGRAY;
+ screenrow=5;
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO,
"%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%%c%c%c%c%c",218,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,191);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c
Boot Menu %c",179,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO,
"%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%c%%c%c%c%c%c",195,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,196,180);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c
%c",179,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c == Select a
Boot First device == %c",179,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c
%c",179,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c 1.
",179);
+ if (selected==1) {
+ bios_textcolor = SC_LIGHTGRAY;
+ bios_backgroundcolor = SC_BLUE;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "Floppy ");
+ if (selected==1) {
+ bios_textcolor = SC_BLUE;
+ bios_backgroundcolor = SC_LIGHTGRAY;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, " %c",179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c 2.
",179);
+ if (selected==2) {
+ bios_textcolor = SC_LIGHTGRAY;
+ bios_backgroundcolor = SC_BLUE;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "Hard drive ");
+ if (selected==2) {
+ bios_textcolor = SC_BLUE;
+ bios_backgroundcolor = SC_LIGHTGRAY;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, " %c",179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c 3.
",179);
+ if (selected==3) {
+ bios_textcolor = SC_LIGHTGRAY;
+ bios_backgroundcolor = SC_BLUE;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "CD-ROM ");
+ if (selected==3) {
+ bios_textcolor = SC_BLUE;
+ bios_backgroundcolor = SC_LIGHTGRAY;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, " %c",179);
+ if (max == 4) {
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c
4. ",179);
+ if (selected==4) {
+ bios_textcolor = SC_LIGHTGRAY;
+ bios_backgroundcolor = SC_BLUE;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "Network ");
+ if (selected==4) {
+ bios_textcolor = SC_BLUE;
+ bios_backgroundcolor = SC_LIGHTGRAY;
+ }
+ bios_printf(BIOS_PRINTF_SCREEN
+
+ | BIOS_PRINTF_INFO, " %c",179);
+ }
+ move_cursor (screencol,screenrow++);
+ bios_textcolor = SC_BLUE;
+ bios_backgroundcolor = SC_LIGHTGRAY;
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c
%c",179,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c
%c",179,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c Currently
selected: %d %c",179,selected,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c
%c",179,179);
+ move_cursor (screencol,screenrow++);
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "%c%c%c%c%c%c%c%c
%c%c:Move Enter:Accept %c%c%c%c%c%c%c%c",
+
192,196,196,196,196,196,196,180,24,25,195,196,196,196,196,196,196,180);
+
+ do {
+ scode = wait(WAIT_HZ, 1);
+ } while (scode == 0);
+ switch(scode) {
+ case 0x02:
+ case 0x03:
+ case 0x04:
+ selected = scode - 1;
+ break;
+ case 0x05:
+ if (max == 4)
+ selected = scode -1 ;
+ else
+ scode = 0;
+ break;
+ case 0x48:
+ selected -= 1;
+ if (selected < 1)
+ selected = 1;
+ scode = 0;
+ break;
+ case 0x50:
+ selected += 1;
+ if (selected > max)
+ selected = max;
+ scode = 0;
+ break;
+ case 0x1c:
+ break;
+ default:
+ scode = 0;
+ break;
+ }
+ if (scode != 0)
+ break;
+ }
+
+ switch (selected) {
+ case 1:
+ return 0x3D;
+ case 2:
+ return 0x3E;
+ case 3:
+ return 0x3F;
+ case 4:
+ return 0x58;
+ default:
+ return 0;
+ }
+}
+
+void interactive_bootkey()
+{
+ Bit16u i;
+ Bit8u scan = 0;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "\n\nPress ");
+ bios_textcolor=SC_WHITE;
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, "F10");
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_printf(BIOS_PRINTF_SCREEN | BIOS_PRINTF_INFO, " to select boot
device... ");
+ for (i = 5; i > 0; i--)
+ {
+ _wrchs(i+48,(SC_WHITE<<4)+SC_BLACK);
+ scan = wait(WAIT_HZ, 0);
+ switch (scan) {
+ case 0x3D:
+ case 0x3E:
+ case 0x3F:
+ case 0x58:
+ break;
+ case 0x44:
+ scan = bootmenu(inb_cmos(0x3d) & 0x0f);
+ break;
+ default:
+ scan = 0;
+ break;
+ }
+ if (scan != 0)
+ break;
+ }
+
+ /* set the default based on the keypress or menu */
+ switch(scan) {
+ case 0x3D:
+ outb_cmos(0x3d, 0x01);
+ break;
+ case 0x3E:
+ outb_cmos(0x3d, 0x02);
+ break;
+ case 0x3F:
+ outb_cmos(0x3d, 0x03);
+ break;
+ case 0x58:
+ outb_cmos(0x3d, 0x04);
+ break;
+ default:
+ break;
+ }
+}
+
+
void
nmi_handler_msg()
{
@@ -2362,6 +2814,9 @@ void ata_detect( )
}
}
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
type=read_byte(ebda_seg,&EbdaData->ata.devices[device].type);
// Now we send a IDENTIFY command to ATA device
@@ -2870,6 +3325,9 @@ Bit32u lba;
if ( !(status & ATA_CB_STAT_BSY) ) break;
}
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
if (status & ATA_CB_STAT_ERR) {
BX_DEBUG_ATA("ata_cmd_data_out : read error\n");
return 2;
@@ -2978,6 +3436,9 @@ Bit32u length;
channel = device / 2;
slave = device % 2;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
// Data out is not supported yet
if (inout == ATA_DATA_OUT) {
BX_INFO("ata_cmd_packet: DATA_OUT not supported yet\n");
@@ -3593,6 +4054,9 @@ int15_function(regs, ES, DS, FLAGS)
Bit16u bRegister;
Bit8u irqDisable;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT15("int15 AX=%04x\n",regs.u.r16.ax);
switch (regs.u.r8.ah) {
@@ -3901,6 +4365,9 @@ int15_function_mouse(regs, ES, DS, FLAGS
Bit8u comm_byte, prev_command_byte;
Bit8u ret, mouse_data1, mouse_data2, mouse_data3;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT15("int15 AX=%04x\n",regs.u.r16.ax);
switch (regs.u.r8.ah) {
@@ -4335,6 +4802,9 @@ int16_function(DI, SI, BP, SP, BX, DX, C
Bit8u scan_code, ascii_code, shift_flags, count;
Bit16u kbd_code, max;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT16("int16: AX=%04x BX=%04x CX=%04x DX=%04x \n", AX, BX, CX, DX);
switch (GET_AH()) {
@@ -4501,6 +4971,9 @@ inhibit_mouse_int_and_events()
{
Bit8u command_byte, prev_command_byte;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
// Turn off IRQ generation and aux data line
if ( inb(0x64) & 0x02 )
BX_PANIC(panic_msg_keyb_buffer_full,"inhibmouse");
@@ -4869,6 +5342,9 @@ int13_harddisk(DS, ES, DI, SI, BP, ELDX,
Bit16u size, count;
Bit8u device, status;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT13_HD("int13_harddisk: AX=%04x BX=%04x CX=%04x DX=%04x
ES=%04x\n", AX, BX, CX, DX, ES);
write_byte(0x0040, 0x008e, 0); // clear completion flag
@@ -5262,6 +5738,9 @@ int13_cdrom(EHBX, DS, ES, DI, SI, BP, EL
Bit32u lba;
Bit16u count, segment, offset, i, size;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT13_CD("int13_cdrom: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n",
AX, BX, CX, DX, ES);
// BX_DEBUG_INT13_CD("int13_cdrom: SS=%04x DS=%04x ES=%04x DI=%04x
SI=%04x\n",get_SS(), DS, ES, DI, SI);
@@ -5613,6 +6092,9 @@ int13_eltorito(DS, ES, DI, SI, BP, SP, B
{
Bit16u ebda_seg=read_word(0x0040,0x000E);
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT13_ET("int13_eltorito: AX=%04x BX=%04x CX=%04x DX=%04x
ES=%04x\n", AX, BX, CX, DX, ES);
// BX_DEBUG_INT13_ET("int13_eltorito: SS=%04x DS=%04x ES=%04x DI=%04x
SI=%04x\n",get_SS(), DS, ES, DI, SI);
@@ -5689,6 +6171,9 @@ int13_cdemu(DS, ES, DI, SI, BP, SP, BX,
Bit16u before, segment, offset;
Bit8u atacmd[12];
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT13_ET("int13_cdemu: AX=%04x BX=%04x CX=%04x DX=%04x ES=%04x\n",
AX, BX, CX, DX, ES);
//BX_DEBUG_INT13_ET("int13_cdemu: SS=%04x ES=%04x DI=%04x SI=%04x\n",
get_SS(), ES, DI, SI);
@@ -5957,6 +6442,9 @@ int13_harddisk(DS, ES, DI, SI, BP, ELDX,
Bit32u lba;
Bit16u error;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT13_HD("int13 harddisk: AX=%04x BX=%04x CX=%04x DX=%04x
ES=%04x\n", AX, BX, CX, DX, ES);
write_byte(0x0040, 0x008e, 0); // clear completion flag
@@ -6662,6 +7150,9 @@ floppy_drive_recal(drive)
Bit8u val8, dor;
Bit16u curr_cyl_offset;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
// set 40:3e bit 7 to 0
val8 = read_byte(0x0000, 0x043e);
val8 &= 0x7f;
@@ -6754,6 +7245,9 @@ int13_diskette_function(DS, ES, DI, SI,
Bit8u drive_type, num_floppies, ah;
Bit16u es, last_addr;
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
BX_DEBUG_INT13_FL("int13_diskette: AX=%04x BX=%04x CX=%04x DX=%04x
ES=%04x\n", AX, BX, CX, DX, ES);
// BX_DEBUG_INT13_FL("int13_diskette: SS=%04x DS=%04x ES=%04x DI=%04x
SI=%04x\n",get_SS(), get_DS(), ES, DI, SI);
@@ -7624,6 +8118,9 @@ Bit16u seq_nr;
struct ipl_entry e;
+ bios_textcolor=SC_WHITE;
+ bios_backgroundcolor=SC_BLACK;
+
// if BX_ELTORITO_BOOT is not defined, old behavior
// check bit 5 in CMOS reg 0x2d. load either 0x00 or 0x80 into DL
// in preparation for the intial INT 13h (0=floppy A:, 0x80=C:)
@@ -7966,6 +8463,10 @@ int1a_function(regs, ds, iret_addr)
case 0xb1:
// real mode PCI BIOS functions now handled in assembler code
// this C code handles the error code for information only
+
+ bios_textcolor=SC_LIGHTGRAY;
+ bios_backgroundcolor=SC_BLACK;
+
if (regs.u.r8.bl == 0xff) {
BX_INFO("PCI BIOS: PCI not present\n");
} else if (regs.u.r8.bl == 0x81) {
@@ -9825,7 +10326,9 @@ post_default_ints:
call _cdemu_init
;;
#endif // BX_ELTORITO_BOOT
-
+
+ call _interactive_bootkey
+
#if BX_TCGBIOS
call _tcpa_calling_int19h /* specs: 8.2.3 step 1 */
call _tcpa_add_event_separators /* specs: 8.2.3 step 2 */
hvmloader
Description: Binary data
s_seitz.vcf
Description: Vcard
signature.asc
Description: OpenPGP digital signature
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home