| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Network routing setup problem; domU won't start
I'm still unable to get a domU to start up completely and be accessible
via a network connection.
In addition to the configuration file contents and command output which
I've already posted on this topic (please see my earlier e-mail), here's
some more output from various commands which I ran on my dom0 after my
(attempted) creation of a domU.
=============================================================================
[19:35 whodunit /etc/xen 147] xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 256 1 r----- 287.5
template 3 384 1 ------ 1693.6
[20:04 whodunit /etc/xen 148] brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.000000000000 no
xenbr1 8000.feffffffffff no vif0.1
peth1
xenbr2 8000.feffffffffff no vif0.2
pdummy0
[20:04 whodunit /etc/xen 149] brctl showmacs xenbr2
port no mac addr is local? ageing timer
1 fe:ff:ff:ff:ff:ff yes 0.00
[20:04 whodunit /etc/xen 150] xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 256 1 r----- 289.0
template 3 384 1 ------ 1827.0
[20:06 whodunit /etc/xen 151] brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.000000000000 no
xenbr1 8000.feffffffffff no vif0.1
peth1
xenbr2 8000.feffffffffff no vif0.2
pdummy0
[20:06 whodunit /etc/xen 152] brctl showmacs xenbr0
port no mac addr is local? ageing timer
[20:06 whodunit /etc/xen 153] brctl showmacs xenbr1
port no mac addr is local? ageing timer
2 00:0d:87:4d:58:b8 no 1.80
2 00:10:60:24:e7:fe no 8.15
2 00:10:60:26:6b:9d no 39.83
2 00:10:60:26:e7:88 no 7.74
2 00:11:d9:03:a5:01 no 18.54
2 00:12:17:55:98:f4 no 27.45
1 00:13:d4:23:71:66 no 0.00
2 00:18:f8:0e:7b:e1 no 56.75
2 00:80:c8:c1:c8:c6 no 2.44
2 02:20:78:f0:7d:19 no 0.03
2 02:50:8d:49:b9:1e no 0.00
1 fe:ff:ff:ff:ff:ff yes 0.00
[20:06 whodunit /etc/xen 154] brctl showmacs xenbr2
port no mac addr is local? ageing timer
1 fe:ff:ff:ff:ff:ff yes 0.00
[20:06 whodunit /etc/xen 155]
=============================================================================
Note, in the output of "brctl show", that both bridges xenbr1 and xenbr2
are shown with the same "bridge id" value. Is this a cause for concern?
I would really appreciate any assistance here -- even a vague pointer to
something else to investigate. Xen sounds like something I would very
much like to use -- but until/unless I can get the networking to work,
it's of no use to me at all.
--
Rich Wales === Palo Alto, CA, USA === richw@xxxxxxxxx
http://www.richw.org === http://en.wikipedia.org/wiki/User:Richwales
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home