So, after a full day of, basically, guess-and-check debugging, I was able to
figure out something that works.
Basically, the --entry= part of the bootargs line works differently from the
prior bootentry line. In order to have domUloader.py look for the boot
files on a filesystem (instead of a partition on a physical or file device),
the disk and boot lines need to look like this:
disk = [ 'phy:/dev/xenmachines/vm1,hda1,w',
'phy:/dev/xenmachines/vm1-swap,hda2,w' ]
bootloader = '/usr/lib/xen/boot/domUloader.py'
bootargs = '--entry=:/boot/vmlinuz-xen,/boot/initrd-xen'
That seems to work fine.
On 10/9/07 12:48 PM, "Marlier, Ian" <ian.marlier@xxxxxxxxxxxxxxxxxxx> wrote:
> Mornin', all --
>
> For the past year or so, I've been taking advantage of the ability of
> xen 3.0 to export a raw device to a domU in order to simplify machine
> creation and management. I create a "master" image on a standard ext3
> partition, along with it's config file. Then, to create a new machine,
> I just have to do this:
> - Create a new partition in dom0, create a filesystem on it, mount it,
> and do a cp -ax from the Master image to the new partition.
> - Using sed and mv, replace things like the hostname, MAC address(es),
> ip address, etc in the new image and in the config file for the new
> image
> - Unmount the new partition, and start the machine.
>
> This has worked very well -- management is simple, and by exporting the
> master image via NFS I can install identical domU's on any amount of
> host hardware within a matter of minutes.
>
> However, I'm having trouble getting this configuration to work under Xen
> 3.1.0 (as packaged with opensuse 10.3).
>
> Here's an example config file that worked under Xen 3.0.X:
> disk = [ 'phy:/dev/xenmachines/Dale-GDS,hdb2,w',
> 'phy:/dev/xenmachines/Dale-GDS-swap,hdb1,w' ]
> memory = 448
> vcpus = 1
> builder = 'linux'
> name = 'Dale-GDS'
> vif = [ 'mac=00:16:3e:ab:00:25, bridge=xenbr0' ]
> localtime = 0
> on_poweroff = 'destroy'
> on_reboot = 'restart'
> on_crash = 'restart'
> extra = ' TERM=xterm'
> bootloader = '/usr/lib/xen/boot/domUloader.py'
> bootentry = 'hdb2:/boot/vmlinuz-xen,/boot/initrd-xen'
>
>
> I tried using effectively the same config file, with a few additional
> lines, but without success -- I end up getting the error message
> "VmError: Had a bootloader specifed, but no disks are bootable". Here's
> an example modified config which is not working:
> name = 'mail'
> ostype = 'opensuse'
> uuid="b7679686-8947-4a60-141c-a7ae33783d44"
> memory = 128
> vcpus = 1
> builder = 'linux'
> vif = [ 'mac=00:16:3e:ab:00:0e, bridge=xenbr0' ]
> localtime = 0
> on_poweroff = 'destroy'
> on_reboot = 'restart'
> on_crash = 'restart'
> extra = ' '
> bootloader = '/usr/lib/xen/boot/domUloader.py'
> bootargs = '--entry=hdb2:/boot/vmlinuz-xen,/boot/initrd-xen'
> disk = [ 'phy:/dev/xenmachines/mail,hdb2,w',
> 'phy:/dev/xenmachines/mail-swap,hdb1,w' ]
>
>
> Anyone have any idea what I'm missing, or suggestions as to how to
> duplicate the configuration that I have been using with Xen 3.1?
>
> Thanks!
>
> - Ian
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home