WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Debian Etch: Error: Device 0 (vif) could not be connecte

does anyone have any more ideas on this? its causing a real headache and
happens on 3 different servers (all AMD64).

Cheers

Dan

On Fri, 2007-08-24 at 19:54 +0530, trilok nuwal wrote:
> 
> you shoud put in yr config file then try.
> 
> vif  = [ 'bridge=xenbr2' ]
> 
> 
> 
> On 8/24/07, Dan Goscomb <dgoscomb@xxxxxxxxxxxxx> wrote:
>         Hi
>         
>         The bridges work for some DomU... as I said... the bridge is
>         automatically created:
>         
>         vps2:~# brctl show
>         bridge name     bridge id               STP enabled
>         interfaces
>         xenbr2          8000.feffffffffff       no              vif0.2
>                                                                 peth2
>                                                                 vif15.0
>                                                                 vif2.0 
>                                                                 vif4.0
>                                                                 vif11.0
>                                                                 vif6.0
>         
>         vif13.0
>                                                                 vif14.0
>         
>         
>         Config file of one of the DomU:
>         
>         kernel  = '/boot/vmlinuz-2.6.18-4-xen-amd64'
>         ramdisk = '/boot/initrd.img-2.6.18-4-xen-amd64 '
>         memory  = '128'
>         root    = '/dev/sda1 ro'
>         disk    = [ 'phy:vg0/domu-disk,sda1,w',
>         'phy:vg0/domu-swap,sda2,w' ]
>         name    = 'domu'
>         vif  = [ 'ip=<IP_ADDRESS>' ] 
>         on_poweroff = 'destroy'
>         on_reboot   = 'restart'
>         on_crash    = 'restart'
>         
>         
>         Cheers
>         
>         Dan
>         
>         
>         On Fri, 2007-08-24 at 19:45 +0530, trilok nuwal wrote:
>         > better post the config file as well as #ifconfig output in
>         dom0. 
>         >
>         > On 8/24/07, trilok nuwal <tc.nuwal@xxxxxxxxx > wrote:
>         >         Did you created bridges in dom0 whtever u r
>         exporting to domU.
>         >
>         >
>         >
>         >
>         >         On 8/24/07, Dan Goscomb <dgoscomb@xxxxxxxxxxxxx>
>         wrote:
>         >                 Hi All
>         >
>         >                 We have an issue whereby after X number
>         (where X can
>         >                 change) DomU are
>         >                 booted, subsequent ones fail with the error
>         message in
>         >                 the title.
>         >
>         >                 Is this a known issue? I have been unable to
>         work out
>         >                 why that error
>         >                 message is appearing...
>         >
>         >                 Any hints would be appreciated!
>         >
>         >                 Cheers
>         >
>         >                 Dan
>         >
>         >
>         >
>         _______________________________________________
>         >                 Xen-users mailing list
>         >                 Xen-users@xxxxxxxxxxxxxxxxxxx
>         >                 http://lists.xensource.com/xen-users
>         >
>         >
>         >
>         
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users